Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
BETA Alert! RadSec-Direct Open Roaming for Cloud-Managed APs
by stefjohn -
XDR Automation Rule targeting Detections
by Christopher-Peters -
Monitoring DCI Connectivity with ThousandEyes Agent-to-Agent Tests
by Cihan Yilmazer -
Packet capture causing reboot
by BlakeRichardson -
Family Shield not blocking porn
by LeoS -
Group Policies dropping from clients randomly on firmware MX 19.2.8
by BobbyHamersley8331 -
CSCwf97711 - On vEdge 1000 getting reset after RTC reports PWRFAIL
by ravikumar-singh -
DUO v5
by jose.jimenez@denverda.org
Community Activity
Family Shield not blocking porn
Hello Forum,I have a Unifi Network with a Pi-Hole with fixed IP address set as DNS Server. The Pi-Hole has the Cisco Family Shield as Upstream DNS Server. My four IP-addresses are:208.67.222.123208.67.220.1230:0:0:0:0:ffff:d043:de7b0:0:0:0:0:ffff:d04...
3rdpartygadget - sftp fails in multiple ways!
I spun up a dCloud session, as one does, with the intent of testing a gadget idea i had. Although the CLI works fine, there's no way I can find how to sftp to 3rdpartygadget!I've reset the password 5 times, copied and pasted the passwords into the `s...
Packet capture causing reboot
Hi All Overnight I upgraded my MR to MR 32.2.3 in an effort to resolve a network issue however I have noticed that whenever I run a packet capture it causes the AP to reboot, the affected devices are MR44.So far I'm 3/3 with packets captures causing ...
Cucm 11.5 tftp service
Hello! I have a problem with tftp in cucm 11.5 . Few days ago I used it to download wallpapers and languages. Now when I try to change them, they don’t react and changing nothing. On web page of ip phone “TFTP Error” and some errors. Tried to reboot ...
Excellence in Action: Announcing Our New Spotlight Awardees
Every great solution shared in our community is a building block for the next innovation. As we step into this new quarter, we’re taking a moment to celebrate the members who have turned knowledge-sharing into an art form. Our Spotlight Award winner...
How to bulk change Administrator password in CUCM cli?
Hello, I am looking for a solution to bulk update the CLI password of 50 CUCMs that all use the same password. Logging into each CLI one by one and repeating the same steps every time is very time-consuming.I also don’t feel like reinventing the whee...
Can we run eBGP over IPN network in ACI multipod environment ?
We are planning to migrate from N7k to ACI Multipod .In our existing environment, we have a L2 extension between the two DCs to create a eBGP peering between our firewall in DC1 and DC2.Can we do the same setup in ACI Multipod over IPN ? if we extend...
Resolved! Phones suddenly did not register and gets rejected
Hello,I'm having issues with the phones in the same cluster. It gets stuck to registering and gets rejected after the phone reboots.We successfully upgraded our CUCM from 11.5 to 12.5 a week ago.CUCM cluster filled up the active partition to 98% afte...
Endpoint Profiling (Beta) in Cisco Access Manager
Profiling has become a critical requirement, but most solutions still rely on traditional methods that struggle to keep up with the explosion of IoT, OT, and unmanaged devices. The result is limited visibility, manual overhead, and gaps in policy enf...
Group Policies dropping from clients randomly on firmware MX 19.2.8
With the recent firmware upgrade on all our MX security appliances to MX 19.2.8 we are encountering our users that are (VPN Client) & (Wired Client) dropping off their assigned group policies in an everyday basis. What would cause this issue and w...
Resolved! - D-Channel Blocked -
My ISP says the router is 'blocking out the D Channel'I am using an MGCP gateway backhauling the ISDN to Call Manager - I am seeing 'path code violations'yet when the telco puts a loop in the line, it tests clear.They insist is it the CSU (customer s...
Etherchannel to Etherchannel
I have a Catalyst 5509 and I am unable to ping from one etherchannel connection to another etherchannel connection. I have 2 linux boxes connected to the switch via etherchannel. I can ping the switch from each linux box. I can ping each linux box...
CSCwf97711 - On vEdge 1000 getting reset after RTC reports PWRFAIL
We are getting the below error at vEdge-1000 WAN router however there was no power outage at site.RTC reports PWRFAIL @ 11:39 on 07/06, powered up again at 09:44 on 08/06What is the solution for this error. this is affecting the Guest wireless servic...
Problem during boot cisco catalyst 3650 switch
Hello everyoneI have a huge problem with an old switch catalyst 3650 48FS-E, I do the command factory-reset all, then the switch boots by itself and stuck on the mode of the first Image that upload although I do the command flash_init then the comman...
IOSvL nodes and disabled switchports
I've configured multiple OSPF labs, in CML, using the IOSvL node...disabling switchports on those nodes in each lab. (The labs have not been deleted.) When I configured an OSPFv3 lab (my third OSPF lab), initially, the two disabled switchports on two...
