Webex Calling - MPP で保留ボタンを押した後、転送ボタンを押しても反応しない

2024 年 4 月 24 日 (初版) TAC SR Collection主な問題 Multi Platform Phone (MPP) で通話中のコールを転送しようとする時、先に保留ボタンを押してコールを保留した場合、その後に転送ボタンの物理キーを押しても反応しません。また、保留中は転送ボタンのソフトキーも表示されません。物理の転送ボタン； 原因 保留ボタンを押した後、転送ボタンを押しても反応しないのは仕様動作です。通話中に転送ボタンが押された場合、コールが自動的に保留されるため、保留...

The operation took longer than expected.

I have just synchronized both Active Directory and Cisco ISE, ISE is using my server (AD) as an NTP server, everything is fine, but now I'm facing an issue "Status Summary: The operation took longer than expected. This may be caused by slow network c...

Increase TX buffer size exanic x25

 I have a exanic x25 I  wanted to know how and from where can we increase this size of the tx buffer. Any help or suggestio?

Cannot turn on 8841 phone

Hi all. In the screenshot I encountered a problem: immediately after turning it on, this appears. Has anyone else encountered this problem? It asks for a domain, username and password. The phone is completely new. There is a way to access the setting...

Webex Calling Local Gateway で外線への転送コールの発信者番号を転送元番号に変更する

2024 年 4 月 24 日 (初版) TAC SR Collection主な問題 Webex Calling 接続の Local Gateway (以下 LGW) 環境において、Webex Calling 側で LGW 経由で外線から入ったコールを再度別の外線番号へ転送 (Call Forward または Call Transfer) する際、PSTN プロバイダー側にて発信者番号のチェックを行っており、発信者番号が転送元の Webex Calling ユーザの番号になっていない場合、...

VPN route-based unable to ping remote IP

Hi, I am currently encountering issue on route-based ipsec vpn. I cannot ping my remote IP also the remote tunnel. I have verified that there is no decap showing on packets. I already configured static route between each site and still unsucessful of...

Service impact on ISE certificate renewal

Hello. I'm trying to renew the ISE's certificate, but I'm using both admin and eap authentication, portal, and radius DTLS. In this case, I would like to know if renewing this certificate will reboot the ISE or if it will cause downtime. The certific...

Site-to-site vpn failover causing memory spike in spoke sites

Hi All. I would like to get your thoughts on the following issue i have been facing since implementing Dual ISP and failover for site-to-site vpn tunnels.Hub Site:ASA5515 using 9.6(4)42Spoke sites:Cisco ISRs using 15.1(4)M8, using voip services over ...

Call Handler Not Reachable From Outside Call

Hi Experts,I am sitting with an unique issue where my Auto Attendant works perfectly from inside the office, however it is not reachable from external calls.Connection ISP > SIP > CUBE > SIP > CUCMWhat I am seeing is as soon as I direct the call to C...

Cisco SD-WAN prefix list & data prefix list update

Wanted to understand the best practices when updating the prefix-list & data prefix list in SD-WAN network.For example I have the below prefix-listlist_abc: 10.10.10.0/24This prefix list has been used in Centralized policy.I wanted to added new subne...

Configure Port-channel and vPC in advance in Nexus 9K

hi,i'll be configuring a new N9K switch to replace a C9300.my question is, can i configure in advance the port-channel and vPC in the N9K even without the SFP inserted and fiber cables patched?just want to prepare the config so it will be a faster to...

Not able to activate any service on CUCM Subscriber

Hi all, I am not able to activate any service on subscriber and it shows me database failure, when I enter "utils dbreplication runtimestate" on publisher it shows me defining for the subscribers. Can someone help me in both issues?

How to allow RTP protocol in NAT and access list in FMC