Community Activity
Help to change email account from partner to personal mail
Hello, Can some one help me with a guide or information of how to change my partner email to personal email. I'm currently finishing my working relationship with a partner, the dissociation was done today, but now I can't change my profile with email...
No Resources for Meraki Always On
I'm trying to use the Meraki Always On sandbox since it seems impossible to reserve the Small Business and Enterprise sandbox. How does one gain access to the Dashboard if I don't have a OTP? For those who have also ran into this problem, were you ab...
enable eem on 2960x
Hello, Supposedly 2960x support eem past 15.2.(4) and currently on 15.2.7. Any pointers how to enable the Trap? Shows disable.Basically trying to have port shut/noshut on certain time. but when I check policy registered they show but off. Thank you i...
Misunderstood license
Hello , I'm sorry, I have a problem and I'm asking for help... I have a few questions... Is Cisco Business Dashboard free? i.e. you can use up to 25 devices for free? Do I need to buy a license for the software itself? the next question is about down...
Call Studio, EGit and GitHub compatibility
We are in the process of migrating from BitBucket to GitHub. We currently use EGit plugin in Call Studio to connect to BitBucket. However, upon attempting to import a project from GitHub into Call Studio, following error is thrown: "Cannot list the a...
Catalyst 9800-L Wireless Controller Upgrade in HA
Hi Community,An upgrade of 2 Catalyst 9800-L Wireless Controllers in HA is going to be performed and it manages APs both in remote sites and in the central site. The current version is 17.6.4 and it is going to be upgraded to version 17.9.5. I have t...
Remove preloaded image from WLC 9800 and APs
I’ve uploaded the image by running the following commands install add file bootflash: C9800-40-universalk9_wlc.17.09.05.SPA.bin and AP image preload via CLI.The wireless controller has not been rebooted including the access points.How do I go around ...
QoS Question - Scavenger class and others
class-map match-all SCAVENGERmatch ip dscp cs1 Assuming I have a policy map and service policy applying QoS to switchports and interfaces between routers etc.How does the device know what "SCAVENGER" traffic is? Its a variable term with no meaning. I...
received TS_UNACCEPTABLE notify, no CHILD_SA built
Hi, I have a connection ikev2 with strongswan device and when i create the connection, it shows me this: received TS_UNACCEPTABLE notify, no CHILD_SA built We have the same parameters. Can you help me ?
IGMP/Snooping not working over NX-OSv
Happy Friday all,Just as the title states, I've been having trouble getting IGMP through an NX-OSv in my lab. I've done a good bit of research into the subject but I can seem to find an answer as to why IGMP traffic isn't traversing the switch.This i...
AWS site to site vpn help
Hey, all I have a Firepower 1010 appliance and I am trying to set up AWS site to site VPN. The instructions provided by Amazon are outdated so I am looking to see if anyone has any more modern instructions available. I posted on the AWS forms as well...
ISR4431/K9
Buenas tardes, tengo un equipo ISR4431 instalado en un datacenter el cual a traves de dos puertas se conecta hacia una LAN a un cluster de servicios de un proveedor en alta disponibilidad, con otra puerta hacia la WAN MPLS de otro proveedor, y me est...
Cisco network assistant SG500-28 unsupported message
Hello All I have 4 SG500-28 Switches and i want to use Cisco network assistant. Unfortunately when i install CNA 6.1-6.2 or 6.3 i always get the same message that the device is not supported. Currently i am on the latest firmware(updated this mornin...
Am unable login cisco catalyst9200L via GUI but able to access via CLI
Am unable login cisco catalyst9200L via GUI but able to access via CLIshowing the below error on the browser. and showing below attached error could you please help regarding the below error.
Cisco 9800 DFS/Radar Commands
Hi,We use 2700 series ap with Cisco 9800 controller. In 5ghz network, we suspect dfs issue on the user side. we looked for on gui but not successful.So we need to find cli commands regarding to ap dfs scanning/radar scanning status summary and relate...
| User | Count |
|---|---|
| 50 | |
| 28 | |
| 21 | |
| 19 | |
| 18 |
