Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1988001members
1344082discussions

Community Activity

C1111-8PWA-WS mistakenly factory reset

I was having issues in setting up a C1111-8PWA-WS for the first time and decided to start from scratch.  Unfortunately I used the factory-reset all command instead of using a paper clip in the button on the back of the unit and now I am in rommon mod...

Port-Security for 2 switches trunked

Hi all, I have 2 x 9200L Catalyst trunked together. My objective is after PC1 has been plug into Port1 of SW1, PC1 cannot be plug into SW2 and violation restrict will be triggered. Is this possible or what am I doing wrong here? PC1 -> SW1 <---Trunk-...

antotini by Level 1
  • 141 Views
  • 7 replies
  • 0 Helpful votes

Enable BGP HA Graceful Restart

hi,i'm running IPSec VPN betwen HQ and a branch.i need to add the BGP HA graceful restart in the branch dual internet edge router.there's an iBGP between the branch's dual internet edge router and fortigate HA FW (which runs IPSec).my question, is it...

johnlloyd_13_0-1728028701402.png

Auto attendant CUE SIP Trunking

Hi, I'm having problems to redirect incoming call from sip trunk to  CUE AA,- I have a Cisco 3945 and  a NME-CUE , VID: V04- the sip trunk provider only gives the last four digits.- sip trunk number 8800 redirects to extension 100. Works fine.- sip t...

kotushaMx by Level 1
  • 151 Views
  • 7 replies
  • 0 Helpful votes

Regarding EIGRP Authentication

"Can EIGRP be configured on a per-neighbor basis, or is it strictly an interface-level configuration? I understand that EIGRP authentication is applied to all neighbors on a given interface, which can be limiting in multi-access networks. If I need d...

Call Transfer in CUCM

Hi,Cisco CUCM (11.5.1.12900-21)I would like to know if there is specific kind of transfer available to use, specificly, when call goes into first phone and wants to transfer that call to second phone with a click of a button, is this feature availabl...

saba53 by Level 1
  • 104 Views
  • 3 replies
  • 0 Helpful votes

AIR-AP3802E-Q-K9 C9105AXI-Q Not Connected

Fujitsu Laptop A5511/G windows10 Intel(R) Wi-Fi 6 AX201by someone's specificationsThe access point isAIR-AP3802E-Q-K9 C9105AXI-QEven if we try to connect them, we are in trouble because there is no connection.They used to connect.The PC itself has th...

Translator by Community Manager
  • 192 Views
  • 6 replies
  • 0 Helpful votes

AIR-AP3802E-Q-K9 C9105AXI-Q つながらない

富士通ノートパソコン A5511/G windows10 Intel(R) Wi-Fi 6 AX201の仕様でアクセスポイントはAIR-AP3802E-Q-K9 C9105AXI-Qでつなげようとしても、つながらなく困っております。以前はつながっていました。パソコン本体はドライバーも最新にしipv6は社内LANの関係、無効に設定しました。別のパソコンでもLZ-WA10/W1windows10intel IEEE802.11a/b/g/n/ac/axも急につながらなくなり、USBアダプターでつなぐ...

Issues with 9871 Desk Phone

Hi everyone! I was so excited to try out the new 9800 line of phones! I have used the 3PCC/MPP versions of the 8800 phones in my office and overall really liked them, so I expected the 9800 line to be as good if not better. I just got a 9871 and I am...

JF77 by Level 1
  • 71 Views
  • 2 replies
  • 0 Helpful votes

Resolved! Noob question on access port tagging ingress/egress

When you have a port set up as an access port connected to another switch using an access port, which of the behaviors below is correct? Upon ingress to the switch, the port tags the frame based on the vlan assignment.  Upon egress, the port tags the...

pdub206 by Level 1
  • 4136 Views
  • 4 replies
  • 0 Helpful votes

Air-CAP1532i-E-K9 SAP image download/ without service contract

Dear Community,I have go an AIR-CAP1532i-E-K9 Access Point with the lightweight image installed.I would like to install the SAP (autonomus) image.Since this AP is EOL and there is no active service contract, I was not able to download the SAP image f...