Cisco Community

Call Transfer in CUCM

Hi,Cisco CUCM (11.5.1.12900-21)I would like to know if there is specific kind of transfer available to use, specificly, when call goes into first phone and wants to transfer that call to second phone with a click of a button, is this feature availabl...

Wired connection slower than wifi

Hi everyone, I don't know why my wired connection achieve 150mb/sec in download, but the same computer can achieve almost 300mb/sec in download with wifi. I'm using a cat. 6a cable 2m in length (I also tried other cables). I tried to unplug everythin...

C9500-32qc stack wise virtual and hsrp

My stack is currently split between two buildings.Is it possible to take my existing two switches still in stackwise virtual and add a second pair of 9500s in another stackwise virtual and do HSRP between the two stacks?Having trouble googling this a...

Cisco ISE Posture with WLC 9800 in FlexConnect Mode - SGT Issue with F

Hi, We're currently implementing posture with Cisco ISE, and we've successfully configured policies and used dACLs (Downloadable ACLs) for wired and VPN connections. However, we're facing an issue with ISE Posture on WiFi as we can't use dACLs on the...

Cisco ISE and Switch

Hi All, I have weird issue recently on Cisco ISE and need to seek for some advise. I have deployed the Cisco ISE and switches to adapt the dot1x and mab authentication. however I notice each authorization policy changes will not immediately take effe...

Cisco AP not discover Network Printer | D Link AC 1200 discover it

Dear All,I am using cisco wlc 5508 with AP 3802i, problem is that when I connecty with my cisco ap it is not discovering network printer but at the same them when I connect with any router like D-link AC1200 it discover my all network printer, can an...

GRE tunnel flapping issue.

We are facing issue continues IPsec GRE tunnel flapping in case of backhaul link flapped. CPU going at the higher side and GRE Tunnels which are not enabled with crypto are stable. We have DC DR SolutionBranch to DC GRE tunnel created for ipsec.DC co...

Route selection between OSPF processes

I have a situation in a lab topology and I can't seem to figure out how things work: So redistribution is configured between OSPF process 1 and 2 on both R1 and R2. Filtering using route tags is in place in such a way that no network will be redistr...

"IP routed subnet" on cisco C921 router

Hello,We currently have a setup with a Draytek router. This router has 'IP routed subnet' configured on it. From my understanding this is a Draytek concept. The construction is as following:First we have the uplink to our ISP. This is connected to th...

C1111-8PWA-WS mistakenly factory reset

I was having issues in setting up a C1111-8PWA-WS for the first time and decided to start from scratch. Unfortunately I used the factory-reset all command instead of using a paper clip in the button on the back of the unit and now I am in rommon mod...

Assign ACS url trough PPPoE on ASR1001-X (TR-069)

Hi,we are using the Cisco ASR1001-X as core router on our ISP network. For the management of the CPE I set up a TR-069 ACS server. For testing purposes I configured the ACS URL manually on the CPE, which works fine.However I'd like our ASR to pass th...

Routing public subnet trough WAN-interface Cisco C921 router

Hello,Can someone please help me. We want to configure the following construction: /---> (Palo Alto) <-----> LANFiberswitch(ISP) <-----> (C921router) ...

C8200-1N-4T Router. ZBFW passing SCTP

Hello,Does anybody knows how I can pass/allow just SCTP traffic between two different security zones?zone security ZONE_OUTSIDE zone security ZONE_INSIDEI also have an extended ACL in which it is not possible to allow only the sctp protocol. I only g...

Catalyst Center Version 2.3.7.6-70319 Introduces BT Mgmt Interface?

Hello,Some of you may think me crazy but let me ask. We came into the office this morning to find several Change Alerts from our SNMP Monitor. They Centered on our Catalyst 9200 switches. Apparently, the Bluetooth interface has been introduced to our...

VPN Cannot Access Internal Resource - ACL Issue?

Hello,I have been working on setting up an external VPN for global protect. The VPN is able to access internet but won't allow me to access internal resources. After speaking with PaloAlto's support team in depth we were not able to find any issues ...

Exciting Updates: Cisco Community Badge Refresh

Meet the new Spotlight Awardees for May-July 2024. Who are they?

September Community Update

Community Activity