Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Spanning Tree Protocols: Inefficiency in Ring Topologies
by Hamed Fazel -
Devices just registered in ISE Group, leave the group
by dervain.legbou-prestataire -
BGP NVE interface source interface
by JJYRR -
STP protocol setup when installing switch between existing Nexus switc
by nehhetbderrt -
IOS-XE: Bug Trend IOS-XE CY2024 Q3 (7-9月)
by Tsuyoshi Niitani -
ipsec wrong spi CRYPTO-4-RECVD_PKT_INV_SPI
by DraganSkundric87318 -
How do you change the camera model on a VSOM camera template
by jfort -
Register DNS records in Infoblox from learned hostnames in Cisco ISE
by latency
Community Activity
ISE Guest Access wired
Hi friendsI have to configure wired guest access with ise, I don't know if anyone has any idea of the errors I have in the live log, nothing appears, these are my configurations in the switch: aaa authentication dot1x default group radiusaaa author...
Best practise for IPv4 and IPv6 design with loopback interfaces
Hi and thanks in advance for the guidance. Im tasked with designing a IPv4 and IPv6 addressing scheme for a small network (2 host PC's 3 routers with loopback interfaces and two switches) I note in the Cisco IP Addressing Guide it makes reference to ...
How do you change the camera model on a VSOM camera template
How do you change the camera model on a VSOM camera template in VSOM 7.12.1
Dynamic Authorization Failed - No Response has been received - CoA
Hello, Issue - I see these in the Dashboard Alarms and I want to know the cause. The PAN, MNT and PSN are all on the same subnet. ISE 3.3p3 Catalyst switch: IOS-XE17.06.05 (but happens on other versions too) I need some advice with why ISE is report...
Register DNS records in Infoblox from learned hostnames in Cisco ISE
Hello,I was wondering if there is a way to dynamically add DNS names in to Infoblox from learned machine names in Cisco ISE. For instance we have some devices that have local DHCP server and are not getting IPs from Infoblox.The goal is to get those ...
Catalyst Center Version 2.3.7.6-70319 Introduces BT Mgmt Interface?
Hello,Some of you may think me crazy but let me ask. We came into the office this morning to find several Change Alerts from our SNMP Monitor. They Centered on our Catalyst 9200 switches. Apparently, the Bluetooth interface has been introduced to our...
Cisco ISE 3.3 and Entra ID for TEAP(EAPTLS)
Team,We have a scenario in which teap-eaptls is not working with Entra ID. EAP-TLS is working and we could see the certificate details in ISE but when the client is configured to use TEAP-EAPtls no logs are see on client side when running the wiresha...
Difference in BIOS versions between SNS 3615 and C220M5
Hey folks, we recently replaced a mainboard on an ISE 3615 server. Due to the fact that we had already replaced the HDD beforehand, the ISE had to be reimaged. The installation was successful, but it was not possible to boot the ISE with the replacem...
Auto attendant CUE SIP Trunking
Hi, I'm having problems to redirect incoming call from sip trunk to CUE AA,- I have a Cisco 3945 and a NME-CUE , VID: V04- the sip trunk provider only gives the last four digits.- sip trunk number 8800 redirects to extension 100. Works fine.- sip t...
Enable BGP HA Graceful Restart
hi,i'm running IPSec VPN betwen HQ and a branch.i need to add the BGP HA graceful restart in the branch dual internet edge router.there's an iBGP between the branch's dual internet edge router and fortigate HA FW (which runs IPSec).my question, is it...
Resolved! Nothing shows when logged into Total Care Portal
As a Partner, I have been granted to access to a few customers Smart Net Total Care portal and could see all of their info. However, not when I log in, I dont see any customers or any info at all. It's as though the screen hasn't finished loading but...
Cisco ISE - MAB authorization behaviour
Hi all,I'm trying to setup ISE to perform a simple MAB profiling for a printer. For some reason ISE rejects the printer the first time I connect it:Event5400 Authentication failedFailure Reason15039 Rejected per authorization profile I am using an au...
Resolved! Synchronizer is unable to establish connection to peer in UCCE AW
I have an application using the CCMP API to create Persons and Agents. It polls until CCMP reports a "Ready" state indicating the synch to the UCCE back-end has been completed or my 60-second timeout occurs. Normally, this takes under 5 seconds. I al...
How to switch off and on POE on a device
Dear SirsI would like to switch off and back on again the POE function on one channel of my Cisco 2960 Catalyst switch.I have a number of Latte Panda PCs attached and sometimes one may need to be powered down and powered up again without switching th...
Spanning Tree Protocols: Inefficiency in Ring Topologies
The Spanning Tree Protocol (STP) family, which includes STP, RSTP (Rapid Spanning Tree Protocol), and MSTP (Multiple Spanning Tree Protocol), has been essential for loop protection in networks. However, are these protocols efficient for use in ring t...
