The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
I was having issues in setting up a C1111-8PWA-WS for the first time and decided to start from scratch. Unfortunately I used the factory-reset all command instead of using a paper clip in the button on the back of the unit and now I am in rommon mod...
Hi all, I have 2 x 9200L Catalyst trunked together. My objective is after PC1 has been plug into Port1 of SW1, PC1 cannot be plug into SW2 and violation restrict will be triggered. Is this possible or what am I doing wrong here? PC1 -> SW1 <---Trunk-...
hi,i'm running IPSec VPN betwen HQ and a branch.i need to add the BGP HA graceful restart in the branch dual internet edge router.there's an iBGP between the branch's dual internet edge router and fortigate HA FW (which runs IPSec).my question, is it...
Hi, I am helping a non profit organization with their RV345. In the past we've purchased the web filter license from Provantage, apparently they no longer provide it. Have also checked with CDW and Google'd and we're not finding any resource.Has anyo...
Hi, I'm having problems to redirect incoming call from sip trunk to CUE AA,- I have a Cisco 3945 and a NME-CUE , VID: V04- the sip trunk provider only gives the last four digits.- sip trunk number 8800 redirects to extension 100. Works fine.- sip t...
"Can EIGRP be configured on a per-neighbor basis, or is it strictly an interface-level configuration? I understand that EIGRP authentication is applied to all neighbors on a given interface, which can be limiting in multi-access networks. If I need d...
Hi,Cisco CUCM (11.5.1.12900-21)I would like to know if there is specific kind of transfer available to use, specificly, when call goes into first phone and wants to transfer that call to second phone with a click of a button, is this feature availabl...
Hello,Some of you may think me crazy but let me ask. We came into the office this morning to find several Change Alerts from our SNMP Monitor. They Centered on our Catalyst 9200 switches. Apparently, the Bluetooth interface has been introduced to our...
Fujitsu Laptop A5511/G windows10 Intel(R) Wi-Fi 6 AX201by someone's specificationsThe access point isAIR-AP3802E-Q-K9 C9105AXI-QEven if we try to connect them, we are in trouble because there is no connection.They used to connect.The PC itself has th...
Hello,My organization is trying to dig deeper into the available WebEx reporting to get a better sense of how our individual departments are performing. Specifically, we are having some staffing trouble in one department and want to use reporting to ...
Hi everyone! I was so excited to try out the new 9800 line of phones! I have used the 3PCC/MPP versions of the 8800 phones in my office and overall really liked them, so I expected the 9800 line to be as good if not better. I just got a 9871 and I am...
When you have a port set up as an access port connected to another switch using an access port, which of the behaviors below is correct? Upon ingress to the switch, the port tags the frame based on the vlan assignment. Upon egress, the port tags the...
Dear Community,I have go an AIR-CAP1532i-E-K9 Access Point with the lightweight image installed.I would like to install the SAP (autonomus) image.Since this AP is EOL and there is no active service contract, I was not able to download the SAP image f...