Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Devices just registered in ISE Group, leave the group
by dervain.legbou-prestataire -
BGP NVE interface source interface
by JJYRR -
STP protocol setup when installing switch between existing Nexus switc
by nehhetbderrt -
IOS-XE: Bug Trend IOS-XE CY2024 Q3 (7-9月)
by Tsuyoshi Niitani -
ipsec wrong spi CRYPTO-4-RECVD_PKT_INV_SPI
by DraganSkundric87318 -
💡Coming up from Webex for Devs💡
by kaabadi -
Catalyst Center Version 2.3.7.6-70319 Introduces BT Mgmt Interface?
by zachartl -
Nothing shows when logged into Total Care Portal
by lafield12
Community Activity
Catalyst Center Version 2.3.7.6-70319 Introduces BT Mgmt Interface?
Hello,Some of you may think me crazy but let me ask. We came into the office this morning to find several Change Alerts from our SNMP Monitor. They Centered on our Catalyst 9200 switches. Apparently, the Bluetooth interface has been introduced to our...
Best practise for IPv4 and IPv6 design with loopback interfaces
Hi and thanks in advance for the guidance. Im tasked with designing a IPv4 and IPv6 addressing scheme for a small network (2 host PC's 3 routers with loopback interfaces and two switches) I note in the Cisco IP Addressing Guide it makes reference to ...
Nothing shows when logged into Total Care Portal
As a Partner, I have been granted to access to a few customers Smart Net Total Care portal and could see all of their info. However, not when I log in, I dont see any customers or any info at all. It's as though the screen hasn't finished loading but...
MTP vs MPO cable availability from Cisco
I can't seem to find any information / matrices / compatibility guides that include MTP cables from Cisco. Do they even exist? Have a customer looking to buy some MTP12 cables, but all we can find are MPO12. I understand MTP can work in place of M...
Cisco 3850: IOS-XE/Firmware Upgrade
Cisco 3850: IOS-XE/Firmware Upgrade (Install Mode) NOTE: This procedure is aimed at Cisco 3850 switch ONLY.IOS-XE Bundle Mode is not covered. 9300, 9500 (vanilla & high-performance), ISR 1k, ISR 4k and ASR is not covered. Router(s) & switch(es) r...
Resolved! Update to version 2.11.0.2 failing - re-enable the server connection
I upgraded to 2.11.0 and manually applied the patch to 2.11.0.1 as per the instructions. I received the notification that a new software update 2.11.0.2 for Collector is available. There are no specific update instructions related to this release (th...
Resolved! Cisco ISE - Move policy nodes to Admin/monitoring node
Hello Team, I need some help, we need to know if we can move the policy nodes to admin-monitoring nodes? we have version 2.4, base and Device admin licenses installed, we are running on Virtual machines. Our Deployment: 1 primary admin-secondary moni...
Two routers are losing eigrp adjacency
I have my data center router and 10 remote routers that all connect back to the data center in a hub and spoke topology. I use an ISP to connect the remote sites to the data center using MPLS, they say it's a theoretical layer 2 connection. One of my...
ISE Guest Access wired
Hi friendsI have to configure wired guest access with ise, I don't know if anyone has any idea of the errors I have in the live log, nothing appears, these are my configurations in the switch: aaa authentication dot1x default group radiusaaa author...
CX Cloud Agent - Pairing Code
Hello, good afternoon everyone.I am in the process of configuring the CX Cloud Agent and have completed all the necessary steps; the agent is functioning.However, I have not received the pairing code to finalize the setup in my portal. Is there any w...
DNA Center not sending events to syslog
Our DNA Center recently stopped sending events to syslogDNAC version: 2.3.5.6Are there any troubleshooting steps we should perform? "Try-It Now" from the Event Catalog is working (syslog server receives the event), but the subscriptions have stopped ...
No transmit using Jabber with new Lenovo laptop
SpoilerI don't know why 'Spoiler' appears instead of my post.I had Jabber working on my Windows 10 Lenovo laptop. Over the weekend that laptop's keyboard became defective, so I bought a replacement Lenovo laptop. With the new Windows 11 laptop, ther...
Connectivity Issues through PC Port after CUCM upgrade 14.0.1.13900-15
We are now seeing intermittent connectivity issues on computers connected to the PC port on our 7841 and 8841/8851 phones after a CUCM upgrade to version 14.0.1.13900-155. The phone firmware on the 88 series phones is sip88xx.14-2-1-0001-14 and sip78...
Update 2.11.0.2 - Admin GUI - Error Loading the page, please refresh
This is an unexpected error that I will share with the community. It was recommended on a previous post that a manual process to update to 2.11.0.2 was needed to be followed. I ran the manual process to update a Collector server from 2.11.0.1 to 2.11...
Outbound mail query of Ces
Hi All, Have already running Ces instance for incoming and outgoing mails for domain xyz.com,xyz.co.in & xyz.in, where i have done configuration for both and inbound mail routing. Now we have procure one more instance just for outbound mail routing a...
