Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
err-disable port with FCS/input errors?
by teakay -
One mac address is seen on two differnet ports
by Pune-Netops -
IR1101-K9 Cellular0/1/0 Telit FN980
by websterc -
Latest STIGs on Cisco Switches
by Zee-Far-Man -
CBW 150AX and 151AXM Image Status
by RandyPrice -
What to allow through firewall for AFC on WLC 9800?
by stonent01 -
Use system default browser on Linux (Ubuntu 24.04)
by KvotheTheRaven -
Looking for a mobile app development company?
by Azan Raees
Community Activity
Resolved! Allow authentication of expired certificates - ISE
This is an option in ISE when if checked, ISE allows expired certificates to be authenticated. So here's the deal. We have a number of iPhone devices used internally on the network. Some get left in a desk drawer or powered off. By the time those...
One mac address is seen on two differnet ports
The system was getting APIPA ip add. After logging in to the switch we fonud the following output : -Vlan Mac Address Type Ports---- ----------- -------- -----20 7085.c281.66bd DYNAMIC Gi1/0/3430 bd7085.c281.66 DYNAMIC Te1/1/1We checked the dhcp logs...
Latest STIGs on Cisco Switches
Hello Pros,There some Cisco CatalystC2960X, some 3560CX switches in my organization. I have been given tasked to implement latest (CISCO IOS XE and Cisco IOS XE Switch NDM) STIGs into these switches. It worked on C9200 switches after I upgraded to...
Resolved! 9166 clients not connecting at 5 GHz
9800-80 pair running 17.9.4a and APSP8 (upgraded about a month ago). Upon investigating after slowness/connection complaints from the professor of a 150-seat lecture hall where 9166s are installed, I realized that every single client in the room was ...
Firepower 1150 question
Host-A can ping firepower from inside to outside in range (10.10.10.0/25) but not in range of (10.10.10.128/25). If wild card 'ip route' at core-switch is set to follow (10.10.10.10.128/25) then Host-A can ping all ip's in that range. But all ip's in...
how to get bumped to good SDR in talos ?
what are the pre requisite or step that need to be taken to be seen as good in talos SDR ?
IR1101-K9 Cellular0/1/0 Telit FN980
XXXX-rtr01(config-controller)#$ lte modem band-select all-lte-only slot 0 The "all-lte-only" option is not applicable to this modem type. This command is used and works for 4G LTE modules, we also had an early R&D P-5GS6-GL module from Cisco that wor...
Cisco 9861 doesn't show line text label or display caller-id
We recently purchased our first 9800 IP phones, both the 9841 and 9861 models. We've installed the first couple of 9861's and there's some behavior we can't seem to get around. The 9861 will not show the line text label for line #1 when there are a...
Resolved! Unable to find Meraki Enterprise Sandbox
Hello,I need a sandbox to test the API with Systems Manager (SM) device responses. I understand that the Meraki Enterprise Sandbox facilitates this, but I am currently unable to locate it.Could you please assist me in finding the sandbox or suggest a...
[WARNING: AMP - ATTACHMENT UNSCANNED][A/V UNSCANNABLE][SUSPECTED SPAM]
Hello friends, could you help me with my query?The antispam is sending mail to quarantine ( the problem occurs with a domain.), checking the logs it is observed that the Subject mentions the following: [WARNING: AMP - ATTACHMENT UNSCANNED][A/V UNSCAN...
How to change the Any Connect browser
Hi, I am using Any Connect to access my office.I found that the browser used to log in the server through Any Connect was Internet Explorer when I had a trouble and I had to delete the cache to stop the browser from automatically filling in my e-mail...
Difference in get response webex XML getUser vs People get person
Hi Team, I found discrepancy in response of Webex get user XML API vs get person Details (People API).<use:meetingTypes><use:meetingType>3</use:meetingType></use:meetingTypes>MeetingType data is getting listed in XML based API but not in get person D...
Web Auth redirect to passthrough on 9800
I have an existing 5520 with a guest SSID that uses web-auth. It works fine with the passthrough option. Clients are redirected to a web page hosted externally. they click a button and gain access. I am trying to recreate this with a 9800 v17.9.4a, h...
DNAC - Cat Center - Python Help- List all VLANs across all switches
Hello Everyone, I have searched high and low, on Cisco.com, Google.com and developer.cisco.com for any python or DNA Center API that will list the VLANS associated with all switches across the enterprise. We are trying to see what VLANS are used whe...
Resolved! Cisco ISE 3.3 patch 2
Hi All, Need to renew ISE licenses - Anyone know how to generate a report in ISE for Premier, Advantage & Essential Licence usage - Need Peak metrics to determine license renewal quantities.Thanks in advance for any replies
