Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1988024members
1344091discussions

Community Activity

Auto attendant CUE SIP Trunking

Hi, I'm having problems to redirect incoming call from sip trunk to  CUE AA,- I have a Cisco 3945 and  a NME-CUE , VID: V04- the sip trunk provider only gives the last four digits.- sip trunk number 8800 redirects to extension 100. Works fine.- sip t...

kotushaMx by Level 1
  • 170 Views
  • 8 replies
  • 0 Helpful votes

C1111-8PWA-WS mistakenly factory reset

I was having issues in setting up a C1111-8PWA-WS for the first time and decided to start from scratch.  Unfortunately I used the factory-reset all command instead of using a paper clip in the button on the back of the unit and now I am in rommon mod...

prevent email spoofing

Hi All, Need to enable Validity Check on the Sender's Domain i.e Envelope sender dns verification and Verify the From Header Using DMARC i.e applying an Enforce or Quarantine dmarc profile to Mail flow policy.  Basically i need to know what will be t...

Vishal6_0-1728104946741.png Vishal6_1-1728104987480.png
Vishal6 by Level 1
  • 44 Views
  • 0 replies
  • 0 Helpful votes

Hardare Certification by Country

I need to verify if a given Cisco-made product or component is certified for a given country.  Different countries have different regulatory standards, and the hardest thing to find is whether or not a given component is green-lit by a given governme...

trmoon-19 by Level 1
  • 26 Views
  • 0 replies
  • 0 Helpful votes

Port-Security for 2 switches trunked

Hi all, I have 2 x 9200L Catalyst trunked together. My objective is after PC1 has been plug into Port1 of SW1, PC1 cannot be plug into SW2 and violation restrict will be triggered. Is this possible or what am I doing wrong here? PC1 -> SW1 <---Trunk-...

antotini by Level 1
  • 173 Views
  • 7 replies
  • 0 Helpful votes

Enable BGP HA Graceful Restart

hi,i'm running IPSec VPN betwen HQ and a branch.i need to add the BGP HA graceful restart in the branch dual internet edge router.there's an iBGP between the branch's dual internet edge router and fortigate HA FW (which runs IPSec).my question, is it...

johnlloyd_13_0-1728028701402.png

Regarding EIGRP Authentication

"Can EIGRP be configured on a per-neighbor basis, or is it strictly an interface-level configuration? I understand that EIGRP authentication is applied to all neighbors on a given interface, which can be limiting in multi-access networks. If I need d...

Call Transfer in CUCM

Hi,Cisco CUCM (11.5.1.12900-21)I would like to know if there is specific kind of transfer available to use, specificly, when call goes into first phone and wants to transfer that call to second phone with a click of a button, is this feature availabl...

saba53 by Level 1
  • 115 Views
  • 3 replies
  • 0 Helpful votes

AIR-AP3802E-Q-K9 C9105AXI-Q Not Connected

Fujitsu Laptop A5511/G windows10 Intel(R) Wi-Fi 6 AX201by someone's specificationsThe access point isAIR-AP3802E-Q-K9 C9105AXI-QEven if we try to connect them, we are in trouble because there is no connection.They used to connect.The PC itself has th...

Translator by Community Manager
  • 195 Views
  • 6 replies
  • 0 Helpful votes