Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
SNTC page stuck in loop
by vivarock12 -
Steps missing - Duo for NetScaler Web
by Rathelm80 -
smtpping tool testing
by Vishal6 -
interesting Catalyst AP wireless discovery observation
by andy!doesnt!like!uucp -
TLS failed. Reason: [Errno 0] Error
by Vishal6 -
Problem with ssl decrypt-resign on Cisco Sefure Firewall
by janvanek -
ISE 3.3 change custom name Policy Element via API
by JPavonM -
Cisco AnyConnect Management Tunnel with Microsoft Cloud PKI
by deanka75
Community Activity
Resolved! Created DMZ
Hello everyone, please help me. I want to create 3 sections: INSIDE, OUTSIDE and DMZ. With OUTSIDE it is possible to ping, and access services in the DMZ. INSIDE also does the same thing and it has the addition of being able to ping OUTSIDE(8.8.8.8),...
Resolved! PDMT cannot migrate WLC
Hi, Wondering if anyone has run into the following issue. Trying to migrate Prime to DNA center using the inbuilt PDMT but everything works except the WLCs will not migrate to DNAC. I've turned off SNMP v1 and v3 on the WLCs to no avail. One thing to...
D-link phone only receives IP from data VLAN
I have a cisco 3750X-48P switch and a D-Link DPH-400SE phone, where the phone is connected to the G2/0/35 interface, with the configuration below:interface GigabitEthernet2/0/35switchport access vlan 153switchport mode accessswitchport voice vlan 99n...
SNTC page stuck in loop
Hola, the client is having SNTC looping when they enter to the SNTC portal to generate the Token for the CSCP. between this page and what can be done in this case. Saludos, Gerardo Andree Mejía García.
New Updates to CML and NSO sandbox labs
Hi Community, Yesterday, we released updates to our popular CML and NSO sandboxes. Cisco Modeling Labs (CML)We want to scale the CML sandbox. Right now, if slots are full, users have to wait. This is annoying and we want to address it while keeping...
Delay talk path on Cisco phone internal calls only
Has anyone encountered the following: Intermittent delayed call audio on internal calls only (RTP setup is from device to device). We have two locations out of many other locations that are reporting issue (all with identical Meraki configuration te...
Ask support equipment
Currently my company is using AIR-AP2802I-S-K9 with WLC AIR-CT5508-25-K9. I knew that AIR-CT5508-25-K9 EOS so we have to replace this WLC with newer model. Due to limit budget we can replace AIR-CT5508-25-K9 only can you give me what kinds of WLC tha...
Error Message: "1459617833 CCM_SIP_503_SERVICE_UNAVAILABLE"
Hi Guys, My Customer have the solution with CUCM 105.2 with 05 sites. There are calls that not are completed and We received the error message: "1459617833 CCM_SIP_503_SERVICE_UNAVAILABLE". I reaserched in Cisco site and another sites the signficat...
Redes na prática: MPLS Parte I
Introdução a MPLSSeguindo com a série de artigos redes na prática, neste irei introduzir o famoso Multiprotocol Label Switching (MPLS). O MPLS é uma tecnologia standard que foi apresentada inicialmente como uma melhoria no processo de encaminhamento ...
Cisco 5508 WLC v.8.5.161.0 doesn´t work via GUI but does work via SSH
Cisco 5508 WLC v.8.5.161.0 doesn´t work via GUI but does work via SSH. It used to work and then it stopped working. The web mode option is enabled. Any help or a similar case?
Log Subscription
I am trying to pull log files from my SMA. I am logged in with the admin account and when I https://SMA_Name/system_administration/log_list?log_type=system_logs I get the message "Access Denied. You do not have the necessary privileges to view or edi...
Steps missing - Duo for NetScaler Web
Just an FYI for anyone else trying to secure Netscaler with the newer application protections. The guide is missing a couple of critical steps. The nFactor flow won't always send the proper password credentials to the Storefront causing an error of u...
Forget MDS admin user
Hello We have Cisco MDS 9148T , anyway to reset the admin password as I forget it.Appreciate your help Thanks
ISR Vlan Interface IP Address assigned by DHCP (Client)
I am using a Cisco C1111 ISR w/ 2 L3 interfaces, 8 L2 interfaces. Interface Vlan601 currently has an IP address assigned to it. I would like to use DHCP to assign the IP address to this interface. However, when I change it to DHCP, the MAC address in...
Firepower 1010 readiness check stuck at "Please Wait"
I have a Firepower 1010, on 7.0.0-94 that I'm trying to upgrade to 7.4.2-172. I ran the readiness check last night at 8pm. 12 hours later, at 8 am, it still says "Please wait" on the readiness check, and won't let me hit the upgrade button. Followi...
