South-Silk-Gallery-RTR1# *Nov 21 16:03:44.995: EHWIC ESWGE I2C read error *Nov 21 16:03:45.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:45.675: EHWIC ESWGE I2C read error *Nov 21 16:03:45.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 South-Silk-Gallery-RTR1# *Nov 21 16:03:45.755: EHWIC ESWGE I2C read error *Nov 21 16:03:46.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:46.435: EHWIC ESWGE I2C read error *Nov 21 16:03:46.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:46.515: EHWIC ESWGE I2C read error *Nov 21 16:03:47.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:47.195: EHWIC ESWGE I2C read erro South-Silk-Gallery-RTR1#sho tecr *Nov 21 16:03:47.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:47.275: EHWIC ESWGE I2C read error *Nov 21 16:03:47.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:47.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:48.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:48.115: EHWIC ESWGE I2C read e South-Silk-Gallery-RTR1#sho tec South-Silk-Gallery-RTR1#sho tech-support ------------------ show version ------------------ Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(1)T1, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Wed 12-Feb-14 04:57 by prod_rel_team ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1) South-Silk-Gallery-RTR1 uptime is 6 minutes System returned to ROM by power-on System image file is "flash0:c2900-universalk9-mz.SPArror *Nov 21 16:03:48.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:48.195: EHWIC ESWGE I2C read error *Nov 21 16:03:48.875: %ESWGE_E.154-1.T1.bin" Last reload type: Normal Reload Last reload reason: power-on This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to compRR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:48.875: EHWIC ESWGE I2C read error *Nov 21 16:03:48.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:48.955: EHWIC ESWGE I2C read error *Nov 21 16:03:49.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 2ly with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco CISCO2901/K9 (revision 1.0) with 466944K/57344K bytes of memory. Processor board ID FGL181525SE 11 Gigabit Ethernet interfaces 2 terminal 1 16:03:49.635: EHWIC ESWGE I2C read error *Nov 21 16:03:49.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:49.715: EHWIC ESWGE I2C read error *Nov 21 16:03:50.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:50.3lines 1 Virtual Private Network (VPN) Module 4 Voice FXO interfaces 4 Voice FXS interfaces 1 Internal Services Module (ISM) with Services Ready Engine (SRE) Cisco Unity Express 8.6.6 in slot/sub-slot 0/0 DRAM configuration is 64 bits wide with parity enabled. 255K bytes of non-volatile configuration memory. 250880K bytes of ATA System CompactFlash 0 (Read/Write) License Info: License UDI: ------------------------------------------------- Device# PID SN --------------------------95: EHWIC ESWGE I2C read error *Nov 21 16:03:50.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:50.475: EHWIC ESWGE I2C read error *Nov 21 16:03:51.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:51.155: EHWIC ESWGE I2C read error *Nov 21 16:03:51.235: %ESWGE_ERR-3-CMDQ_FUL----------------------- *1 CISCO2901/K9 FGL181525SE Technology Package License Information for Module:'c2900' ------------------------------------------------------------------------ Technology Technology-package Technology-package Current Type Next reboot ------------------------------------------------------------------------ ipbase ipbasek9 Permanent ipbasek9 security securityk9 L: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:51.235: EHWIC ESWGE I2C read error *Nov 21 16:03:51.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:51.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:52.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, Permanent securityk9 uc uck9 Permanent uck9 data None None None NtwkEss None None None CollabPro None None None Configuration register is 0x2102 ------------------ show running-config ------------------ Building configuration... Current configuration : 14742 bytes ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname South-Silk-Gallery-RTR1 ! boot-start-marker boot-end-marker ! aqm-register-fnf ! logging buffered 51200 warnings enable secret 5 ! no aaa new-model clock timezone PST 5 0 ! ! ! ! ip dhcp excluded-address 172.16.238.1 172.16.238.30 ip dhcp excluded-address 192.168.57.129 192.168.57.132 ! ip dhcp pool South-Silk-Gallery-Branch network 172.16.238.0 255.255.255.0 domain-name dibpak.com default-router 172.16.238.1 dns-server 172.16.25.17 lease 30 ! ip dhcp pool South-Silk-Gallery-VOICE network 192.168.57.128 255.255.255.224 domain-name dibpak.com default-router 192.168.57.129 dns-server 172.16.25.16 172.16.25.17 option 150 ip 192.168.57.129 lease 30 ! ! ! no ip bootp server no ip domain lookup ip cef no i I2C cmd Read fail at in slot 1 *Nov 21 16:03:52.075: EHWIC ESWGE I2C read error *Nov 21 16:03:52.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:52.155: EHWIC ESWGE I2C read error *Nov 21 16:03:52.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:52.835: EHWIC ESWGE I2C read epv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! trunk group fxo preemption enable ! ! crypto pki trustpoint TP-self-signed-3178686788 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3178686788 revocation-check none rsakeypair TP-self-signed-3178686788 ! ! crypto pki certificate chain TP-self-signed-3178686788 voice-card 0 dsp services dspfarm ! ! voice rtp send-recv ! voice service voip allow-connections h323 to h323 redirect ip2ip fax protrror *Nov 21 16:03:52.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:52.915: EHWIC ESWGE I2C read error *Nov 21 16:03:53.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:53.595: EHWIC ESWGE I2C read error *Nov 21 16:03:53.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full,ocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none h323 ! voice class codec 1 codec preference 1 g729r8 ! ! voice register global mode cme source-address 192.168.57.129 port 5060 max-dn 48 max-pool 12 ! voice user-profile 5 user 4864 password 4864 number 4864 type normal ! voice user-profile 6 user 4865 password 4865 number 4865 type normal ! ! ! ! ! license udi pid CISCO2901/K9 sn FGL181525SE hw-module ism 0 ! hw-module pvdm 0/0 ! ! ! archive log I2C cmd Read fail at in slot 1 *Nov 21 16:03:53.675: EHWIC ESWGE I2C read error *Nov 21 16:03:54.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:54.355: EHWIC ESWGE I2C read error *Nov 21 16:03:54.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Readconfig hidekeys username admin password 0 ! redundancy ! ! ! ! ! ip ssh time-out 60 ip ssh version 2 ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp policy 3 encr 3des authentication pre-share crypto isakmp key address 0.0.0.0 no-xauth crypto isakmp keepalive 10 ! crypto ipsec security-association replay disable ! crypto ipsec transform-set DIB esp-3des esp-sha-hmac mode transport ! crypto ipsec profil fail at in slot 1 *Nov 21 16:03:54.435: EHWIC ESWGE I2C read error *Nov 21 16:03:55.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:55.115: EHWIC ESWGE I2C read error *Nov 21 16:03:55.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:55.195: EHWIC ESWGE I2C read error *Nov 2e DMVPNPROFILE set transform-set DIB ! ! ! ! ! ! ! interface Tunnel1 description ******Connection To Karim Chamber's Primary 3845 Router****** bandwidth 5000 ip address 10.11.0.238 255.255.0.0 no ip redirects ip mtu 1352 ip nbar protocol-discovery ip nhrp authentication secure ip nhrp map multicast 192.168.241.36 ip nhrp map 10.11.0.1 192.168.241.36 ip nhrp network-id 100000 ip nhrp holdtime 300 ip nhrp nhs 10.11.0.1 ip tcp adjust-mss 1312 ip ospf network broadcast 1 16:03:55.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:55.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:55.671: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-3:SEPC4143C8B31E0 IP:192.168.57.137 Socket:5 DeviceType:Phone has unregistered abnormally. *Nov 21 16:03:56.035: %ESWGE_ERR-ip ospf priority 0 load-interval 30 delay 1000 qos pre-classify cdp enable tunnel source GigabitEthernet0/0 tunnel destination 192.168.241.36 tunnel key 100000 tunnel protection ipsec profile DMVPNPROFILE ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 description ***Primary WAN Connection*** ip address 192.168.245.158 255.255.255.252 duplex full speed 100 ! interface ISM0/0 ip unnumbered Vlan3 !Application: CUE Running on I3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:56.035: EHWIC ESWGE I2C read error *Nov 21 16:03:56.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:56.115: EHWIC ESWGE I2C read error *Nov 21 16:03:56.795: %ESWGE_ERR-3-CMDQ_FULL: SM ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface ISM0/1 description Internal switch interface connected to Internal Service Module no ip address ! interface GigabitEthernet0/1/0 switchport access vlan 2 switchport voice vlan 3 no ip address ! interface GigabitEthernet0/1/1 switchport access vlan 2 switchport voice vlan 3 no ip address ! interface GigabitEthernet0/1/2 switchport access vlan 2 switchport voice vlan 3 no ip addCommand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:56.795: EHWIC ESWGE I2C read error *Nov 21 16:03:56.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:56.875: EHWIC ESWGE I2C read error *Nov 21 16:03:57.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:57.555: ress ! interface GigabitEthernet0/1/3 switchport access vlan 2 switchport voice vlan 3 no ip address ! interface GigabitEthernet0/1/4 switchport access vlan 2 switchport voice vlan 3 no ip address ! interface GigabitEthernet0/1/5 switchport access vlan 2 switchport voice vlan 3 no ip address ! interface GigabitEthernet0/1/6 switchport access vlan 2 switchport voice vlan 3 no ip address ! interface GigabitEthernet0/1/7 switchport access vlan 2 switchport voice vlan 3 EHWIC ESWGE I2C read error *Nov 21 16:03:57.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:57.635: EHWIC ESWGE I2C read error *Nov 21 16:03:58.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:58.315: EHWIC ESWGE Ino ip address ! interface Vlan1 no ip address ! interface Vlan2 ip address 172.16.238.1 255.255.255.0 no autostate h323-gateway voip interface h323-gateway voip id South-Silk-Gallery ipaddr 172.16.26.10 1719 h323-gateway voip h323-id South-Silk-Gallery h323-gateway voip tech-prefix 1# ! interface Vlan3 description voice LAN ip address 192.168.57.129 255.255.255.224 h323-gateway voip bind srcaddr 192.168.57.129 ! router ospf 100 router-id 172.16.238.1 area 1 stub no-summary 2C read error *Nov 21 16:03:58.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:58.395: EHWIC ESWGE I2C read error *Nov 21 16:03:59.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:59.075: EHWIC ESWGE I2C read error *Nov 21 16:03:59.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue network 10.11.0.0 0.0.255.255 area 1 network 172.16.238.0 0.0.0.255 area 1 network 192.168.57.128 0.0.0.31 area 1 ! ip forward-protocol nd ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ip route 192.168.57.130 255.255.255.255 ISM0/0 ip route 192.168.240.0 255.255.240.0 192.168.245.157 ! logging trap notifications logging source-interface Tunnel1 logging host 172.16.26.21 ! ! snmp-server community is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:03:59.155: EHWIC ESWGE I2C read error *Nov 21 16:03:59.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:59.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:03:59.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read f RO snmp-server community RW snmp-server host 172.16.26.19 snmp-server host 172.16.26.20 snmp-server host 172.16.26.22 snmp-server host 172.17.26.19 snmp-server host 172.17.26.20 snmp-server host 172.17.26.21 snmp-server host 172.17.26.22 tftp-server flash:BOOT69xx.0-0-0-14.zz.sgn tftp-server flash:DSP69xx.0-0-0-8.zz.sgn tftp-server flash:SCCP69xx.9-2-1-0.loads tftp-server flash:SCCP69xx.9-2-1-0.zz.sgn tftp-ail at in slot 1 *Nov 21 16:03:59.995: EHWIC ESWGE I2C read error *Nov 21 16:04:00.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:00.075: EHWIC ESWGE I2C read error *Nov 21 16:04:00.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in sloserver flash:apps42.9-2-1TH1-13.sbn tftp-server flash:cnu42.9-2-1TH1-13.sbn tftp-server flash:cvm42sccp.9-2-1TH1-13.sbn tftp-server flash:dsp42.9-2-1TH1-13.sbn tftp-server flash:jar42sccp.9-2-1TH1-13.sbn tftp-server flash:SCCP42.9-2-1S.loads tftp-server flash:term42.default.loads tftp-server flash:term62.default.loads tacacs-server host 172.16.26.8 tacacs-server directed-request access-list 1 permit 172.16.3.145 log access-list 1 permit 172.16.238.2 log access-list 1 permit 172.16.238.3 log act 1 *Nov 21 16:04:00.755: EHWIC ESWGE I2C read error *Nov 21 16:04:00.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:00.835: EHWIC ESWGE I2C read error *Nov 21 16:04:01.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:01.515: EHWIC ESWGE I2C read error *Nov 21 16:04:01.59cess-list 1 permit 172.16.238.1 log access-list 1 permit 172.16.3.48 log access-list 1 permit 192.168.241.60 log access-list 1 permit 172.16.3.20 log access-list 1 permit 172.17.26.22 access-list 1 permit 172.16.26.20 log access-list 1 permit 172.17.26.21 access-list 1 permit 172.17.26.20 access-list 1 permit 172.17.26.19 access-list 1 permit 172.16.3.5 log access-list 1 permit 192.168.241.36 log access-list 1 permit 172.16.3.84 access-list 1 permit 172.16.3.81 log access-list 1 permit 192.1685: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:01.595: EHWIC ESWGE I2C read error *Nov 21 16:04:02.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:02.275: EHWIC ESWGE I2C read error *Nov 21 16:04:02.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in sl.242.100 log ! control-plane ! ! voice-port 0/2/0 trunk-group fxo cptone PK timeouts call-disconnect 3 timeouts wait-release 3 connection plar opx 4859 caller-id enable ! voice-port 0/2/1 trunk-group fxo cptone PK timeouts call-disconnect 3 timeouts wait-release 3 connection plar opx 4859 caller-id enable ! voice-port 0/2/2 trunk-group fxo cptone PK timeouts call-disconnect 3 timeouts wait-release 3 connection plar opx 4859 caller-id enable ! ot 1e-port 0/2/3 *Nov 21 16:04:02.355: EHWIC ESWGE I2C read error *Nov 21 16:04:03.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:03.035: EHWIC ESWGE I2C read error *Nov 21 16:04:03.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 2 trunk-group fxo cptone PK timeouts call-disconnect 3 timeouts wait-release 3 connection plar opx 4859 caller-id enable ! voice-port 0/3/0 ! voice-port 0/3/1 timeouts ringing infinity connection plar 4859 description **** **** station-id name FC caller-id enable ! voice-port 0/3/2 timeouts ringing infinity connection plar 4859 description **** FC **** station-id name FC caller-id enable ! voice-port 0/3/3 description **** Kitchen **** station-id name Kitchen cal1 16:04:03.115: EHWIC ESWGE I2C read error *Nov 21 16:04:03.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:03.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:03.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:03.955: EHWIC ESWler-id enable ! ! ! ! ! mgcp fax t38 ecm mgcp behavior rsip-range tgcp-only mgcp behavior comedia-role none mgcp behavior comedia-check-media-src disable mgcp behavior comedia-sdp-force disable ! mgcp profile default ! sccp local Vlan3 sccp ccm 192.168.57.129 identifier 1 priority 1 version 7.0 sccp ! sccp ccm group 1 bind interface Vlan3 associate ccm 1 priority 1 associate profile 1 register dibpl8party ! ! ! dspfarm profile 1 conference codec g711ulaw codec g711alaGE I2C read error *Nov 21 16:04:04.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:04.035: EHWIC ESWGE I2C read error *Nov 21 16:04:04.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:04.715: EHWIC ESWGE I2C read error *Nov 21 16:04:04.795: %ESWGE_ERR-3-CMDQ_FULL: Command qw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 2 associate application SCCP shutdown ! dial-peer cor custom name Mobile name Local name NWD name Int name UAN name Toll name Local-BR name Inter-BR name HO-BR name GOV ! ! dial-peer cor list Mobile member Mobile ! dial-peer cor list Local member Local ! dial-peer cor list NWD member NWD ! dial-peer cor list Int member Int ! dial-peer cor list UAN member UAN ! dial-peer cor ueue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:04.795: EHWIC ESWGE I2C read error *Nov 21 16:04:05.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:05.475: EHWIC ESWGE I2C read error *Nov 21 16:04:05.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Fulllist Toll member Toll ! dial-peer cor list Local-BR member Local-BR ! dial-peer cor list Inter-BR member Inter-BR ! dial-peer cor list HO-BR member HO-BR ! dial-peer cor list UAN-Local member Mobile member Local member NWD member UAN member Toll member GOV ! dial-peer cor list Teller member Local member NWD ! dial-peer cor list Master member Mobile member Local member NWD member Int member UAN member Toll ! dial-peer cor list Operator member Local membe, I2C cmd Read fail at in slot 1 *Nov 21 16:04:05.555: EHWIC ESWGE I2C read error *Nov 21 16:04:06.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:06.235: EHWIC ESWGE I2C read error *Nov 21 16:04:06.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:06.315: EHWIC ESWGE I2C readr NWD member UAN member Toll ! dial-peer cor list GOV member GOV ! ! dial-peer voice 100 pots trunkgroup fxo corlist outgoing Mobile destination-pattern 0[0][3]T ! dial-peer voice 101 pots trunkgroup fxo corlist outgoing Local destination-pattern 0[2-8]T ! dial-peer voice 102 pots trunkgroup fxo corlist outgoing NWD destination-pattern 0[0][24-9]T ! dial-peer voice 103 pots trunkgroup fxo corlist outgoing Int destination-pattern 0[00]T ! dial-peer voice 104 pots error *Nov 21 16:04:06.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:06.995: EHWIC ESWGE I2C read error *Nov 21 16:04:07.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:07.075: EHWIC ESWGE I2C read error *Nov 21 16:04:07.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Ful trunkgroup fxo corlist outgoing UAN destination-pattern 0[1]T ! dial-peer voice 105 pots trunkgroup fxo corlist outgoing Toll destination-pattern 0[0][8-9][00]T ! dial-peer voice 106 pots ! dial-peer voice 107 pots trunkgroup fxo corlist outgoing GOV destination-pattern 0[9]T ! dial-peer voice 202 pots corlist incoming UAN-Local service stcapp port 0/3/2 ! dial-peer voice 203 pots corlist incoming Local-BR destination-pattern 1113 port 0/3/3 no register e164 ! dial, I2C cmd Write fail at in slot 1 *Nov 21 16:04:07.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:07.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:07.915: EHWIC ESWGE I2C read error *Nov 21 16:04:07.995: %ESWGEl-peer voice 3600 voip destination-pattern [1-9]... session target ras no vad ! dial-peer voice 201 pots corlist incoming UAN-Local service stcapp port 0/3/1 ! dial-peer voice 4859 voip destination-pattern 485[8-9] session protocol sipv2 session target ipv4:192.168.57.66 dtmf-relay sip-notify codec g711ulaw no vad ! ! gateway timer receive-rtp 1200 ! ! ! gatekeeper shutdown ! ! telephony-service sdspfarm units 1 sdspfarm tag 1 dibpl8party max-ephones 12 ma_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:07.995: EHWIC ESWGE I2C read error *Nov 21 16:04:08.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:08.675: EHWIC ESWGE I2C read error *Nov 21 16:04:08.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov x-dn 48 ip source-address 192.168.57.129 port 2000 auto assign 1 to 8 timeouts ringing 30 timeouts night-service-bell 4 url services http://192.168.57.129/voiceview/common/login.do url authentication http://192.168.57.129/CCMCIP/authenticate.asp load 7910 P00405000700 load 7942 SCCP42.9-2-1S load 6921 SCCP69xx.9-2-1-0 time-zone 37 time-format 24 date-format dd-mm-yy voicemail 4858 mwi reg-e164 max-conferences 8 gain -6 moh enable-g711 "moh.wav" multicast moh 239.0.0.0 p21 16:04:08.755: EHWIC ESWGE I2C read error *Nov 21 16:04:09.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:09.435: EHWIC ESWGE I2C read error *Nov 21 16:04:09.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:09.515ort 2000 web admin system name admin password admin dn-webedit transfer-system full-consult secondary-dialtone 0 login timeout 5 night-service code *1234 night-service day Sun 12:00 08:00 night-service day Mon 17:00 08:00 night-service day Tue 17:00 08:00 night-service day Wed 17:00 08:00 night-service day Thu 17:00 08:00 night-service day Fri 17:00 08:00 night-service day Sat 13:00 12:00 create cnf-files version-stamp Jan 01 2002 00:00:00 ! ! ephone-dn 1 dual-line numbe: EHWIC ESWGE I2C read error *Nov 21 16:04:10.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:10.195: EHWIC ESWGE I2C read error *Nov 21 16:04:10.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:10.275: EHWIC ESWGE I2C read error *Nov 21 16:04:10.955: %ESWGE_ERR-3-CMDQ_FULL: r 4860 no-reg primary pickup-group 11 label 4860 description **** BM **** name **** BM **** call-forward busy 4858 call-forward noan 4858 timeout 20 corlist incoming UAN-Local night-service bell ! ! ephone-dn 2 dual-line number 4861 no-reg primary pickup-group 11 label 4861 description ** ** name **** call-forward busy 4858 call-forward noan 4858 timeout 20 corlist incoming UAN-Local night-service bell ! ! ephone-dn 3 dual-line number 4862 no-reg primary pickCommand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:10.955: EHWIC ESWGE I2C read error *Nov 21 16:04:11.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:11.035: EHWIC ESWGE I2C read error *Nov 21 16:04:11.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:11.195up-group 11 label 4862 description **** name *** call-forward busy 4858 call-forward noan 4858 timeout 20 corlist incoming UAN-Local night-service bell ! ! ephone-dn 4 dual-line number 4863 no-reg primary pickup-group 11 label 4863 description * OM * name * OM * call-forward busy 4858 call-forward noan 4858 timeout 20 corlist incoming UAN-Local night-service bell ! ! ephone-dn 5 dual-line number 4864 no-reg primary pickup-group 11 label 4864 description **U: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:11.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:11.875: EHWIC ESWGE I2C read error *Nov 21 16:04:11.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read T** name **-UT** call-forward busy 4858 call-forward noan 4858 timeout 20 corlist incoming UAN-Local night-service bell ! ! ephone-dn 6 dual-line number 4865 no-reg primary pickup-group 11 label 4865 description **-UT** name **-UT** call-forward busy 4858 call-forward noan 4858 timeout 20 corlist incoming UAN-Local night-service bell ! ! ephone-dn 8 number 8000.... mwi on ! ! ephone-dn 9 number 8001.... mwi off ! ! ephone-dn 42 dual-line number A101 fail at in slot 1 *Nov 21 16:04:11.955: EHWIC ESWGE I2C read error *Nov 21 16:04:12.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:12.635: EHWIC ESWGE I2C read error *Nov 21 16:04:12.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:12.715: EHWIC ESWGE I2C read error *Nov name Conference conference ad-hoc preference 3 no huntstop ! ! ephone-dn 43 dual-line number A101 name Conference conference ad-hoc preference 2 no huntstop ! ! ephone-dn 44 dual-line number A101 name Conference conference ad-hoc preference 1 no huntstop ! ! ephone 1 device-security-mode none mac-address C414.3C8B.374F type 6921 button 1:1 ! ! ! ephone 2 device-security-mode none mac-address C414.3C8B.3734 type 6921 button 1:2 ! ! ! ephone21 16:04:13.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:13.395: EHWIC ESWGE I2C read error *Nov 21 16:04:13.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:13.475: EHWIC ESWGE I2C read error *Nov 21 16:04:14.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Rea 3 device-security-mode none mac-address C414.3C8B.31E0 type 6921 button 1:3 ! ! ! ephone 4 device-security-mode none mac-address C414.3C8B.374B type 6921 button 1:4 ! ! ! ephone 5 device-security-mode none mac-address 501C.BFFD.B9F7 type 7942 button 1:5 ! ! ! ephone 6 device-security-mode none mac-address C414.3C8B.375E type 6921 button 1:6 ! ! ! banner motd ^CCWarning!!! You are accessing a private network. The network is monitored and we reserve thd fail at in slot 1 *Nov 21 16:04:14.155: EHWIC ESWGE I2C read error *Nov 21 16:04:14.171: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-6:SEPC4143C8B375E IP:192.168.57.133 Socket:2 DeviceType:Phone has unregistered abnormally. *Nov 21 16:04:14.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in sloe right to take legitimate action against any unauthorized access attempt^C ! line con 0 logging synchronous line aux 0 line 2 no activation-character no exec transport preferred none transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 67 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 privilege level 15 password logging st 1 *Nov 21 16:04:14.235: EHWIC ESWGE I2C read error *Nov 21 16:04:14.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:14.915: EHWIC ESWGE I2C read error *Nov 21 16:04:14.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:14.995: EHWIC ESWGE I2C read error *Nov 21 16:04:15.075ynchronous login transport input all line vty 5 15 privilege level 15 logging synchronous login transport input ssh ! scheduler allocate 20000 1000 ntp authentication-key 1 md5 0718206D5A293D2C35 7 ntp authenticate ntp trusted-key 1 ntp update-calendar ntp server 10.11.0.1 ! end ------------------ show redundancy history ------------------ 00:00:13 client added: Redundancy Mode RF(29) seq=60 00:00:13 client added: CHKPT RF(25) seq=68 00:00:13 client added: SNMP RF Client(34): %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:15.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:15.671: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-5:SEP501CBFFDB9F7 IP:192.168.57.134 Socket:4 DeviceType:Phone has unregiste seq=235 00:00:13 client added: History RF Client(35) seq=245 00:00:13 client added: IKE RF Client(135) seq=359 00:00:13 client added: IPSEC RF Client(136) seq=360 00:00:13 client added: CRYPTO RSA(130) seq=361 00:00:13 client added: PKI RF Client(131) seq=362 00:00:13 client added: IOS FW RF Client(140) seq=365 00:00:14 *my state = INITIALIZATION(2) peer state = DISABLED(1) 00:00:14 RF_PROG_INITIALIZATION(100) First Slave(0) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) Slave(3) op=0 rc=23 00:red abnormally. *Nov 21 16:04:15.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:15.835: EHWIC ESWGE I2C read error *Nov 21 16:04:15.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:15.915: EHWIC ESWGE I2C read error *Nov 21 16:04:16.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue 00:14 RF_PROG_INITIALIZATION(100) Redundancy Mode RF(29) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) CHKPT RF(25) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) SNMP RF Client(34) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) History RF Client(35) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) IKE RF Client(135) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) IPSEC RF Client(136) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) CRYPTO RSA(130) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) Pis Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:16.595: EHWIC ESWGE I2C read error *Nov 21 16:04:16.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:16.675: EHWIC ESWGE I2C read error *Nov 21 16:04:17.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:17.355: EHWIC ESWGE KI RF Client(131) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(10I2C read error 0) IOS FW RF Client(140) op=0 rc=11 00:00:14 RF_EVENT_SLAVE_PROG_DONE(522) Slave(3) op=0 rc=11 00:00:14 RF_PROG_INITIALIZATION(100) Last Slave(65000) op=0 rc=11 00:00:14 *my state = NEGOTIATION(3) peer state = DISABLED(1) 00:00:44 client added: LLDP(208) seq=209 00:00:44 client added: TPM RF client(402) seq=157 00:00:44 client added: VOIP RF CLIENT(1345) seq=129 00:00:44 client added: EEM Server RF CLIENT(250) seq=269 00:00:44 client a *Nov 21 16:04:17.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:17.435: EHWIC ESWGE I2C read error *Nov 21 16:04:18.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:18.115: EHWIC ESWGE I2C read error *Nov 21 16dded: EEM POLICY-DIR RF CLIENT(252) seq=271 00:00:44 client added: mDNS(24115) seq=479 00:00:44 client added: FH_RF_Event_Detector_stub(50) seq=282 00:00:59 System initialization complete 00:00:59 RF_STATUS_PEER_COMM(401) op=0 rc=0 00:00:59 RF_STATUS_PEER_PRESENCE(400) op=0 rc=0 00:00:59 RF_EVENT_GO_ACTIVE(512) op=0 rc=0 00:00:59 *my state = ACTIVE-FAST(9) peer state = DISABLED(1) 00:00:59 RF_PROG_ACTIVE_FAST(200) First Slave(0) op=0 rc=11 00:00:59 RF_PROG_ACTIVE_FAST(200) Slave(3) op=0 rc=23 00::04:18.171: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-2:SEPC4143C8B3734 IP:192.168.57.135 Socket:1 DeviceType:Phone has unregistered abnormally. *Nov 21 16:04:18.171: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-4:SEPC4143C8B374B IP:192.168.57.136 Socket:3 DeviceType:Phone has unregistered abnormally. *Nov 21 16:04:18.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at01:00 RF_PROG_ACTIVE_FAST(200) Redundancy Mode RF(29) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) CHKPT RF(25) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) VOIP RF CLIENT(1345) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) TPM RF client(402) op=0 rc=11 0 in slot 10:01:00 RF_PROG_ACTIVE_FAST(200) LLDP(208) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) SNMP RF Client(34) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) History RF Client(35) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) EEM Server RF CLIENT(250) op=0 *Nov 21 16:04:18.195: EHWIC ESWGE I2C read error *Nov 21 16:04:18.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:18.875: EHWIC ESWGE I2C read error *Nov 21 16:04:18.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) EEM POLICY-DIR RF CLIENT(252) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) FH_RF_Event_Detector_stub(50) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200)4:18.955: EHWIC ESWGE I2C read error IKE RF Client(135) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) IPSEC RF Client(136) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) CRYPTO RSA(130) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) PKI RF Client(131) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) IOS FW RF Client(140) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_F *Nov 21 16:04:19.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:19.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:19.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16AST(200) mDNS(24115) op=0 rc=11 00:01:00 RF_EVENT_SLAVE_PROG_DO:04:19.795: EHWIC ESWGE I2C read error NE(522) Slave(3) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_FAST(200) Last Slave(65000) op=0 rc=11 00:01:00 *my state = ACTIVE-DRAIN(1 *Nov 21 16:04:19.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10) peer state = DISABLED(1) 00:01:00 RF_PROG_ACTIVE_DRAIN(201) First Slave(0) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) Slave(3) op=0 rc=23 00:01:00 RF_PROG_ACTIVE_DRAIN(201) Redundancy Mode RF(29) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) CHKPT RF(25) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) VOIP RF *Nov 21 16:04:19.875: EHWIC ESWGE I2C read error *Nov 21 16:04:20.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:20.555: EHWIC ESWGE I2C read error *Nov 21 16:04:20.635: %ESWGE_ERR-3-CMDQ_FULL: Co CLIENT(1345) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) TPM RF client(402) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) LLDP(208) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) SNMP RF Client(34) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) History RF Client(35) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) EEM Server RF CLIENT(250) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) EEM POLICY-DIR RF CLIENT(252) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) FH_RF_Event_Detector_stub(50) op=0 rc=11 mmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:20.635: EHWIC ESWGE I2C read error *Nov 21 16:04:21.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:21.315: EHWIC ESWGE I2C read error *Nov 21 16:04:21.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:21.395: E00:01:00 RF_PROG_ACTIVE_DRAIN(201) IKE RF Client(135) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) IPSEC RF Client(136) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) CRYPTO RSA(130) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) PKI RF Client(131) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) IOS FW RF Client(140) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) mDNS(24115) op=0 rc=11 00:01:00 RF_EVENT_SLAVE_PROG_DONE(522) Slave(3) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_DRAIN(201) Last Slave(65000) op=0 rcHWIC ESWGE I2C read error *Nov 21 16:04:22.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:22.075: EHWIC ESWGE I2C read error *Nov 21 16:04:22.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:22.155: EHWIC ESWGE I2C read error *Nov 21 16:04:22.835: %ESWGE_ERR-3-CMDQ_FULL: Co=11 00:01:00 *my state = ACTIVE_PRECONFIG(11) peer state = DISABLED(1) 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) First Slave(0) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) Slave(3) op=0 rc=23 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) Redundancy Mode RF(29) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) CHKPT RF(25) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) VOIP RF CLIENT(1345) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) TPM RF client(402) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFImmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:22.835: EHWIC ESWGE I2C read error *Nov 21 16:04:22.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:22.915: EHWIC ESWGE I2C read error *Nov 21 16:04:22.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue iG(202) LLDP(208) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) SNMP RF Client(34) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) History RF Client(35) op=0 rc=11 00:01:00 RF_PROG_ACTs Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:23.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:23.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1IVE_PRECONFIG(202) EEM Server RF CLIENT(250) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) EEM POLICY-DIR RF CLIENT(252) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) FH_RF_Event_DetC read error ector_stub(50) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) IKE RF Client(135) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECON *Nov 21 16:04:23.755: EHWIC ESWGE I2C read error *Nov 21 16:04:23.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:23.835: EHWIC ESWGE I2FIG(202) IPSEC RF Client(136) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) CRYPTO RSA(130) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) PKI RF Client(131) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) IOS FW RF Client(140) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_PRECONFIG(202) mDNS(24115) op=0 rc=11 00:01:00 RF_EVENT_SLAVE_PROG_DONE(522) Slave(3) op=0 rc=11 00:01:00 RF_ *Nov 21 16:04:24.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1PROG_ACTIVE_PRECONFIG(202) Last Slave(65000) op=0 rc=11 00:01:00 *my state = ACTIVE_POSTCONFIG(12) peer state = DISABLED(1) *Nov 21 16:04:24.515: EHWIC ESWGE I2C read error *Nov 21 16:04:24.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:24.595: EHWIC ESWGE I2C read error *Nov 21 16:04:25.275: EHWIC ESWGE I2C read error *Nov 21 16:04:25.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:25.355: EHW 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) First Slave(0) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) Slave(3) op=0 rc=23 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) Redundancy Mode RF(29) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) CHKPT RF(25) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) VOIP RF CLIENT(1345) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) TPM RF client(402) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) LLDP(208) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(IC ESWGE I2C read error *Nov 21 16:04:26.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:26.035: EHWIC ESWGE I2C read error *Nov 21 16:04:26.115: EHWIC ESWGE I2C read error *Nov 21 16:04:26.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 203) SNMP RF Client(34) op=0 rc=11I2C read error 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) History RF Client(35) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) EEM Server RF CLIENT(250) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) EEM POLICY-DIR RF CLIENT(252) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) FH_RF_Event_Detector_stub(50) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) IKE RF Client(135) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) IPSEC RF Client(136) op=0 rc=11 00:01:00 RF_PRO *Nov 21 16:04:26.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:26.875: EHWIC ESWGE I2C read error *Nov 21 16:04:26.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:27.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:27.739: %G_ACTIVE_POSTCONFIG(203) CRYPTO RSA(130) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) PKI RF Client(131) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) IOS FW RF Client(140) op=0 rc=11 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) mDNS(24115) op=0 rc=11 ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 00:01:00 RF_PROG_ACTIVE_POSTCONFIG(203) Last Slave(65000) op=0 rc=11 00:01:00 *my state = ACTIVE(13) peer state = DISABLED(1) 00:01:00 RF_PROG_ACTIVE(204) First Slave(0) op=0 rc=11 00:01 *Nov 21 16:04:27.739: EHWIC ESWGE I2C read error *Nov 21 16:004:28.499: EHWIC ESWGE I2C read error 4:27.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:27.819: EHWIC ESWGE I2C read error *Nov 21 16:04:28.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16::00 RF_PROG_ACTIVE(204) Slave(3) op=0 rc=23 00:01:00 RF_PROG_ACTIVE(204) Redundancy Mode RF(29) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) CHKPT RF(25) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) VOIP RF CLIENT(1345) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) TPM RF client(402) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) LLDP(208) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) SNMP RF Client(34) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) History RF Client(35) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) EEM Server RF CLIENT(25 *Nov 21 16:04:28.579: EHWIC ESWGE I2C read error *Nov 21 16:04:29.271: EHWIC ESWGE I2C read error *Nov 21 16:04:29.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:29.351: EHWIC ESWGE I2C read error *Nov 21 16:04:30.031: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:30.031: 0) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) EEM POLICY-DIR RF CLIENT(252) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) FH_RF_Event_Detector_stub(50) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) IKE RF Client(135) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) IPSEC RF Client(136) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) CRYPTO RSA(130) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) PKI RF Client(131) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) IOS FW RF Client(140) op=0 rc=11 EHWIC ESWGE I2C read error4) mDNS(24115) op=0 rc=11 *Nov 21 16:04:30.195: EHWIC ESWGE I2C read error *Nov 21 16:04:30.875: EHWIC ESWGE I2C read error *Nov 21 16:04:31.047: EHWIC ESWGE I2C read error *Nov 21 16:04:31.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:31.391: %ESWGE_ERR-3- 00:01:00 RF_EVENT_SLAVE_PROG_DONE(522) Slave(3) op=0 rc=11 00:01:00 RF_PROG_ACTIVE(204) Last Slave(65000) op=0 rc=11 ------------------ show redundancy states ------------------ my state = 13 -ACTIVE peer state = 1 -DISABLED Mode = Simplex Unit ID = 0 Maintenance Mode = Disabled Manual Swact = disabled (system is simplex (no peer unit)) Communications = Down Reason: Simplex mode client count = 16 client_notification_TMR = 60000 miCMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:32.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:32.071: EHWIC ESWGE I2C read error *Nov 21 16:04:32.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:32.151: EHWIC ESWGE I2C read error *Nov 21 16lliseconds keep_alive TMR = 4000 milliseconds keep_alive count = 0 keep_alive threshold = 7 RF debug mask = 0x0 ------------------ show redundancy switchover history ------------------ ------------------ show stacks ------------------ Minimum process stacks: Free/Size Name 5260/6000 CDP BLOB 8240/9000 EM ED GOLD 10980/12000 MRIB IPv4 Init Process 11244/12000 MRIB IPv6 Init Process 3704/6000 EEM Shell Director 1616/6000 Call :0%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 14:32.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:32.831: EHWIC ESWGE I2C *Nov 21 16:04:33.591: EHWIC ESWGE I2C read error read error *Nov 21 16:04:32.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:32.911: EHWIC ESWGE I2C read error *Nov 21 16:04:33.591: Home DSFileUp 92940/100000 stile_activate_process 5260/6000 Inspect Init Msg 5232/6000 SPAN Subsystem 58996/60000 script background loader 5012/6000 FLEX DSPRM boot download main 15228/24000 Init 58708/60000 EEM Auto Registration Proc 5116/6000 Auto Upgrade Startup Process 4676/6000 DIB error message 5260/6000 SASL MAIN 2260/3000 allegro libretto init 5024/6000 LICENSE AGENT DEFAULT 10776/12000 PnP Agent Discovery 10988/12000 Router Init 8264/9000 cdp init pr *Nov 21 16:04:33.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:33.671: EHWIC ESWGE I2C read error ocess21 16:04:34.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 5032/6000 RADIUS INITCONFIG 11260/12000 HTTP SSL PKI CERTIFICATE CREATE PROC 3036/6000 sp2600_dnld_fmw_record 5260/6000 platform_reclaim_mem 9044/12000 TFTP Server 1604/3000 Rom Random Update Process 5168/6000 URPF stats 22124/24000 Exec 52480/60000 AFW_application_process Interrupt level stacks: Level Called Unused/Size Name 1 110514 16528/18000 Network Interrupt 3 572 17392/18000 Mgmt Interrupt 4 2547 17552/18000 Console UART *Nov 21 16:04:34.351: EHWIC ESWGE I2C read error *Nov 21 16:04:34.431: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:34.431: EHWIC ESWGE I2C read error *Nov 21 16:04:35.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:35.111: EHWIC ESWGE I2C read error *Nov 21 16:04:35.475: % 7 108456 17544/18000 NMI Interrupt Handler ------------------ show interfaces ------------------ Embedded-Service-Engine0/0 is administratively down, line protocol is down Hardware is Embedded Service Engine, address is 0000.0000.0000 (bia 0000.0000.0000) MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) ARP type: ARPA, ARP Timeout 04:00:00 Last input never,ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:35.475: EHWIC ESWGE I2C read error *Nov 21 16:04:35.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:35.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:36.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 output never, output hang never Last clearing of "show interface" counters never Input queue: 0/64/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 *Nov 21 16:04:36.391: EHWIC ESWGE I2C read error *Nov 21 16:04:36.639: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:36.639: EHWIC ESWGE I2C read error *Nov 21 16:04:37.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 input packets with dribble condition detected 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, *Nov 21 16:04:37.319: EHWIC ESWGE I2C read error 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/0 is down, line protocol is down Hardware is CN Gigabit Ethernet, address is 1005.ca2d.9b98 (bia 1005.ca2d.9b98) Description: ***Primary WAN Connection*** Interne *Nov 21 16:04:37.399: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:37.399: EHWIC ESWGE I2C read error *Nov 21 16:04:38.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1t address is 192.168.245.158/30 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full Duplex, 100Mbps, media type is RJ45 output flow-control is unsupported, input flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/fl *Nov 21 16:04:38.079: EHWIC ESWGE I2C read error *Nov 21 16:04:38.159: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:38.159: EHWIC ESWGE I2C read error *Nov 21 16:04:38.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:38.839: EHWIC ESWGE I2C read error *Nov 21 16:04:38.919: %ushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 2 interfESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:38.919: EHWIC ESWGE I2C read error *Nov 21 16:04:39.735: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:39.735: EHWIC ESWGE I2C read error *Nov 21 16:04:39.815: %ESWGE_ERR-3-ace resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out ISM0/0 is up, line protocol is up Hardware is PSE2, address is 1005.ca2d.9bc8 (bia 1005.ca2d.9bc8) Interface is uCMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1nnumbered. Using address of Vlan3 (192.168.57.129) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback *Nov 21 16:04:39.815: EHWIC ESWGE I2C read error *Nov 21 16:04:39.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:40.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:40.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:40.751: E not set Keepalive set (10 sec) Full Duplex, 1Gbps, media type is internal output flow-control is XON, input flow-contrHWIC ESWGE I2C read error ol is XON ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:06, output 00:00:06, output hang never Last clearing of *Nov 21 16:04:40.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 pa *Nov 21 16:04:40.831: EHWIC ESWGE I2C read error *Nov 21 16:04:41.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:41.511: EHWIC ESWGE I2C read error *Nov 21 16:04:41.591: EHWIC ESWGE I2C read errorckets/sec 151 packets input, 12056 bytes, 0 no buffer Received 91 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 12 packets output, 3653 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failure *Nov 21 16:04:42.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:42.271: EHWIC ESWGE I2C read error *Nov 21 16:04:42.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:42.351: EHWIC ESWGE I2C read error *Nov 21 16:04:43.031: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2Cs, 0 output buffers swapped out GigabitEthernet0/1 is administratively down, line protocol is down Hardware is CN Gigabit Ethernet, address is 1005.ca2d.9b99 (bia 1005.ca2d.9b99) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto Duplex, Auto Speed, media type is RJ45 output flow-control is unsupported, input flow-control is unsupported ARP type: ARPA, ARP Timeout 04 cmd Read fail at in slot 1 *Nov 21 16:04:43.031: EHWIC ESWGE I2C read error *Nov 21 16:04:43.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:43.111: EHWIC ESWGE I2C read error *Nov 21 16:04:43.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:43.791: EHWIC ESWGE I2C read err:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0or *Nov 21 16:04:43.871: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:43.871: EHWIC ESWGE I2C read error *Nov 21 16:04:44.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:44.259: %ESWGE_ERR-3-CMDQ_FULL: Command queu overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost e is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:44.939: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out ISM0/1 is up, line protocol is up Hardware is Service Module, address is 0000.0000.0001 (bia 0000.0000.0001) Description: Internal switch interface *Nov 21 16:04:44.939: EHWIC ESWGE I2C read error *Nov 21 16:04:45.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:45.019: EHWIC ESWGE I2C read error *Nov 21 16:04:45.699: EHWIC ESWGE I2C read errorconnected to Internal Service Module MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 1000Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/ma *Nov 21 16:04:45.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:45.779: EHWIC ESWGE I2C read error *Nov 21 16:04:46.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:46.459: EHWIC ESWGE I2C read error *Nov 21 16:04:46.539: EHWIC ESWGE I2C read error *Nov 21 16:04:47.219: %ESx) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 7 packets input, 586 bytes, 0 no buffer Received 0 broadcasts (7 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 193 packets output, 15474 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 unknown pWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:47.219: EHWIC ESWGE I2C read error *Nov 21 16:04:47.467: EHWIC ESWGE I2C read error *Nov 21 16:04:48.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:48.147: EHWIC ESWGE I2C read error rotocol drops:48.227: EHWIC ESWGE I2C read error 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/1/0 is up, line protocol is up Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c0 (bia d072.dc10.e9c0) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 1000Mb/s *Nov 21 16:04:48.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:48.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:49.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/16:04:49.291: EHWIC ESWGE I2C read error sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 inp *Nov 21 16:04:49.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is F04:50.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ull, I2C cmd Read fail at in slot 1 *Nov 21 16:04:49.371: EHWIC ESWGE I2C read error *Nov 21 16:04:50.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:50.051: EHWIC ESWGE I2C read error *Nov 21 16:ut errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 509 packets output, 55489 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/1/1 is up, line protocol is up Hardware is EHW *Nov 21 16:04:50.131: EHWIC ESWGE I2C read error *Nov 21 16:04:50.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:50.811: EHWIC ESWGE I2C read error *Nov 21 16:04:50.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04IC-8 Gigabit Ethernet, address is d072.dc10.e9c1 (bia d072.dc10.e9c1) MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex:50.891: EHWIC ESWGE I2C read error , 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:02:46, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: *Nov 21 16:04:51.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:51.571: EHWIC ESWGE I2C read error *Nov 21 16:04:51.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:51.767: EHWIC ESWGE I2C read error *Nov 21 16:0fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 119 packets input, 18781 bytes, 0 no buffer Received 9 broadcasts (26 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 623 packets output, 66401 bytes, 0 underruns 0 output errors, 0 collisio4:52.455: EHWIC ESWGE I2C read error *Nov 21 16:04:52.603: EHWIC ESWGE I2C read error *Nov 21 16:04:52.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:52.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:53.627: ns, 1 interface resets 3 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/1/2 is up, line protocol is up Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c2 (bia d072.dc10.e9c2) MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive *Nov 21 16:04:53.627: EHWIC ESWGE I2C read error *Nov 21 16:04:53.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:53.707: EHWIC ESWGE I2C :04:54.387: EHWIC ESWGE I2C read error read error *Nov 21 16:04:54.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 *Nov 21 16:04:54.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:02:41, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 98 packets input, 11633 bytes, 0 no buffer Received 14 broadcasts (21 multicasts) *Nov 21 16:04:54.467: EHWIC ESWGE I2C read error *Nov 21 16:04:55.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:55.147: EHWIC ESWGE I2 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 573 packets output, 62331 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 3 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 2 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/1C read error *Nov 21 16:04:55.227: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:55.227: EHWIC ESWGE I2C read error *Nov 21 16:04:55.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:55.907: EHWIC ESWGE I2C read error *Nov 21 16:04:55.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue /3 is down, line protocol is down Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c3 (bia d072.dc10.e9c3) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 1000Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/fluis Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:55.987: EHWIC ESWGE I2C read error *Nov 21 16:04:56.667: EHWIC ESWGE I2C read error *Nov 21 16:04:56.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:56.915: EHWIC ESWGE I2C read error *Nov 21 16:04:56.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write shes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 0 packets output, 0 bytes, 0 underfail at in slot 1 *Nov 21 16:04:57.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:04:57.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:57.755: EHWIC ESWGE I2C read error *Nov 21 16:04:57.871: EHWIC ESWGE I2C read error runs 0 output errors, 0 collisions, 1 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 *Nov 21 16:04:58.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out Gigab *Nov 21 16:04:58.551: EHWIC ESWGE I2C read error itEthernet0/1/4 is up, line protocol is up Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c4 (bia d072.dc10.e9c4) MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulatio *Nov 21 16:04:58.631: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:58.631: EHWIC ESWGE I2C read error *Nov 21 16:04:59.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1n ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:03:04, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 489 packets input, 51656 bytes, 0 no buffer *Nov 21 16:04:59.311: EHWIC ESWGE I2C read error *Nov 21 16:04:59.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04:59.391: EHWIC ESWGE I2C read error *Nov 21 16:05:00.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:00.071: EHWIC ESWGE I2C read error *Nov 21 16:05:00.151: %EReceived 117 broadcasts (116 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 821 packets output, 80552 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 3 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 2 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 outpuSWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:00.151: EHWIC ESWGE I2C read error *Nov 21 16:05:00.923: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:00.927: EHWIC ESWGE I2C read error *Nov 21 16:05:01.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *t buffers swapped out GigabitEthernet0/1/5 is up, line protocol is up Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c5 (bia d072.dc10.e9c5) MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:03:08, output never, output hang never Last clearing of "show interface" counters never InNov 21 16:05:01.007: EHWIC ESWGE I2C read error *Nov 21 16:05:01.087: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:01.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:01.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is put queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Full, I2C cmd Read fail at in slot 1 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 104 packets input, 11367 *Nov 21 16:05:01.999: EHWIC ESWGE I2C read error bytes, 0 no buffer Received 9 broadcasts (32 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition det *Nov 21 16:05:02.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:02.079: EHWIC ESWGE I2C read error *Nov 21 16:05:02.759: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:02.759: EHWIC ESWGE I2C read error *Nov 21 16:ected 566 packets output, 62321 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 3 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 2 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/1/6 is up, line protocol is up Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c6 (bia d072.dc10.e9c6) MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability05:02.907: EHWIC ESWGE I2C read error *Nov 21 16:05:03.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:03.587: EHWIC ESWGE I2C read error *Nov 21 16:05:03.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:03.667: E 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:03:10, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec HWIC ESWGE I2C read error *Nov 21 16:05:04.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:04.347: EHWIC ESWGE I2C read error *Nov 21 16:05:04.535: EHWIC ESWGE I2C read error *Nov 21 16:05:05.215: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:05.215: EHWIC ESWGE I2C read error 105 packets input, 11435 bytes, 0 no buffer Received 10 broadcasts (32 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 566 packets output, 62321 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 3 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 2 lost carrier, 0 no carrier, 0 pa *Nov 21 16:05:05.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:05.295: EHWIC ESWGE I2C read error *Nov 21 16:05:05.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:05.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue isuse output 0 output buffer failures, 0 output buffers swapped out GigabitEthernet0/1/7 is down, line protocol is down Hardware is EHWIC-8 Gigabit Ethernet, address is d072.dc10.e9c7 (bia d072.dc10.e9c7) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:06.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 1000Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never La 05:07.163: EHWIC ESWGE I2C read error *Nov 21 16:05:06.403: EHWIC ESWGE I2C read error *Nov 21 16:05:06.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:06.483: EHWIC ESWGE I2C read error *Nov 21 16:05:07.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:st clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input *Nov 21 16:05:07.243: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:07.243: EHWIC ESWGE I2C read error *Nov 21 16:05:07.923: EHWIC ESWGE I2C read error *Nov 21 16:05:08.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0 0 input packets with dribble condition detected 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 unknown protocol drops 0 b5:08.003: EHWIC ESWGE I2C read error abbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out Tunnel1 is up, line protocol is down Hardware is Tunnel Description: ******Connection To Karim Chamber's Primary 3845 Router****** Internet address is 10.11.0. *Nov 21 16:05:08.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:08.683: EHWIC ESWGE I2C read error *Nov 21 16:05:08.763: EHWIC ESWGE I2C read error *Nov 21 16:05:09.443: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16238/16 MTU 17912 bytes, BW 5000 Kbit/sec, DLY 10000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation TUNNEL, loopback not set Keepalive not set Tunnel source 192.168.245.158 (GigabitEthernet0/0), destination 192.168.241.36 Tunnel Subblocks: src-track: Tunnel1 source tracking subblock associated with GigabitEthernet0/0 Set of tunnels with source GigabitEthernet0/0, 1 member (includes iterators), on interface Tunnel protocol/transp:05:09.443: EHWIC ESWGE I2C read error *Nov 21 16:05:09.535: EHWIC ESWGE I2C read error *Nov 21 16:05:09.799: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 * %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1Nov 21 16:05:10.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:10.687:ort GRE/IP Key 0x186A0, sequencing disabled Checksumming of packets disabled Tunnel TTL 255, Fast tunneling enabled Tunnel transport MTU 1472 bytes Tunnel transmit bandwidth 8000 (kbps) Tunnel receive bandwidth 8000 (kbps) Tunnel protection via IPSec (profile "DMVPNPROFILE") Last input never, output never, output hang never Last clearing of "show interface" counters 00:07:02 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo (Q *Nov 21 16:05:10.687: EHWIC ESWGE I2C read error *Nov 21 16:05:10.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd R05:11.447: EHWIC ESWGE I2C read error ead fail at in slot 1 *Nov 21 16:05:10.767: EHWIC ESWGE I2C read error *Nov 21 16:05:11.447: %ESWGE_ERR-3-CMDQ_FULL: Command *Nov 21 16:05:11.527: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:OS pre-classification) Output queue: 0/0 (size/max) 30 second input rate 0 bits/sec, 0 packets/sec 30 second output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 output buffer failu *Nov 21 16:05:11.527: EHWIC ESWGE I2C read error *Nov 21 16:05:12.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:12.207: EHWIC ESWGE I2res, 0 output buffers swapped out Vlan1 is up, line protocol is up Hardware is EtherSVI, address is 1005.ca2d.9b9b (bia 1005.ca2d.9b9b) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:05:35, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushC read error *Nov 21 16:05:12.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:12.287: EHWIC ESWGE I2C read error *Nov 21 16:05:12.967: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:12.967: EHWIC ESWGE I2C read error *Nov 21 16:05:13.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue ies); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 1 packets output, 77 bytes, 0 underruns 0 output errors, 4 interface resets 6 unknown protocol drops 0 output buffs Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:13.047: EHWIC ESWGE I2C read error *Nov 21 16:05:13.791: EHWIC ESWGE I2C read error *Nov 21 16:05:13.999: EHWIC ESWGE I2C read error *Nov 21 16:05:14.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:14.159er failures, 0 output buffers swapped out Vlan2 is up, line protocol is up Hardware is EtherSVI, address is 1005.ca2d.9b9b (bia 1005.ca2d.9b9b) Internet address is 172.16.238.1/24 MTU: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:14.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:02:31, output never, output hang never Last clearing of "show interface" counters never *Nov 21 16:05:14.839: EHWIC ESWGE I2C read error *Nov 21 16:05:14.919: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:14.919: EHWIC ESWGE I2C read error *Nov 21 16:05:15.599: %ESWGE_ERR-3-CMDQ_FULL: Comm Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2 Queueing strategy: fifo Output queue: 0/40 (sizeand queue is Full, I2C cmd Read fail at in slot 1/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 210 packets input *Nov 21 16:05:15.599: EHWIC ESWGE I2C read error , 23570 bytes, 0 no buffer Received 61 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 199 packets output, 19851 bytes, 0 underruns 0 output errors, 4 interfac *Nov 21 16:05:15.679: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:15.679: EHWIC ESWGE I2C read error *Nov 21 16:05:16.359: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1e resets 28 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out Vlan3 is up, line protocol is up Hardware is EtherSVI, address is 1005.ca2d.9b9b (bia 1005.ca2d.9b9b) Description: voice LAN Internet address is 192.168.57.129/27 MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:02 *Nov 21 16:05:16.359: EHWIC ESWGE I2C read error *Nov 21 16:05:16.439: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:16.439: EHWIC ESWGE I2C read error *Nov 21 16:05:17.119: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:17.119: EHWIC ESWGE I2C read error *Nov 21 16:05:17.199: %:39, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 414 packets input, 36262 bytes, 0 no buffer Received 33 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignoESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:17.199: EHWIC ESWGE I2C read error *Nov 21 16:05:18.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:18.047: EHWIC ESWGE I2C read error *Nov 21 16:05:18.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot red 892 packets output, 95473 bytes, 0 underruns 0 output errors, 4 interface resets 30 unknown protocol drops 0 output buffer failures, 0 output buffers swapped out ------------------ show interfaces history ------------------ ------------------ show controllers ------------------ Embedded engine is not enabled Interface GigabitEthernet0/0 = Hardware = Hardware is PLATFORM SGMII INTERFACE HWIDB: 21B40DF8, INSTANCE: 21B41B00, FASTSEND: 3001FA5C, MCI_INDEX: 0 Rou1 *Nov 21 16:05:18.127: EHWIC ESWGE I2C read error *Nov 21 16:05:18.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:18.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:19.067: %ESWGE_ERR-3-CMDQ_FULL: Command queuete Cache Flag: 11 = Media Media Change Count: 0 PORT IPD Registers: BP_PAGE_CNT: 0x0000000000000001, BP_CNTS_PRX: 0x0000000000000000 GMX Registers: RXX_INT_REG: 0x00000000000000 is Full, I2C cmd Read fail at in slot 100, RXX_INT_EN : 0x0000000000000000 PRTX_CFG : 0x000000000000300E, RXX_FRM_CTL: 0x0000000000000077 RXX_FRM_CHK: 0x00000000 *Nov 21 16:05:19.067: EHWIC ESWGE I2C read error 000003BA, RXX_FRM_MIN: 0x0000000000000000 RXX_FRM_MAX: 0x0000000000000000, RXX_JABBER : 0x0000000000002580 RXX_DECISIO: 0x0000000000000018, RXX_FRM_CTL: 0x0000000000000077 RXX_FRM_CHK *Nov 21 16:05:19.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:19.147: EHWIC ESWGE I2C read error *Nov 21 16:05:19.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:19.827: EHWIC ESWGE I2C read error *Nov 21 16:0: 0x00000000000003BA, RXX_JABBER : 0x0000000000002580 RXX_DECISIO: 0x0000000000000018, RXX_UDD_SKI: 0x0000000000000000 RXX_STATS_C: 0x0000000000000000, RXX_IFG : 0x0000000000000008 RXX_PAU_DRP: 0x0000000000000000, RXX_STATS_P: 0x0000000000000000 RXX_STAT_CT: 0x0000000000000000, RXX_STATS_D: 0x0000000000000000 RXX_STAT_DR: 0x0000000000000000, RXX_STATS_B: 0x0000000000000000 SMACX : 0x00001005CA2D9B98 TXX_SGMII_C: 0x0000000000000001, TXX_CTL : 0x0000000000000003 RX_PRTS : 0x00005:19.971: EHWIC ESWGE I2C read error *Nov 21 16:05:20.651: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:20.651: EHWIC ESWGE I2C read error *Nov 21 16:05:20.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:20.731: EHWIC ESWGE I2C read error *Nov 21 16:05:21.411: %ESWGE_ERR-3-CMD000000000004, RX_BP_DROP : 0x0000000000000002 RX_BP_ON : 0x0000000000000040, RX_BP_OFF : 0x0000000000000010 TXX_PAU_PKT: 0x0000000000000060, TXX_MIN_PKT: 0x000000000000003B TXX_PAU_PKI: 0x0000000000000010, TXX_SOFTPAU: 0x0000000000000000 TXX_PAU_TGO: 0x0000000000000000, TXX_PAU_ZRO: 0x0000000000000001 INF_MODE : 0x0000000000000022, TX_PRTS : 0x0000000000000004 TX_IFG : 0x0000000000000048, TX_JAM : 0x00000000000000EE TX_COL_ATMP: 0x0000000000000010, TX_PAU_DMAC: 0x00000180C2000Q_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:21.411: EHWIC ESWGE I2C read error *Nov 21 16:05:21.603: EHWIC ESWGE I2C read error *Nov 21 16:05:22.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:22.283: EHWIC ESWGE I2C read error *Nov 21 16:05:22.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is F001 TX_PAU_TYPE: 0x0000000000008808, TX_OVR_BP : 0x0000000000000B0B TX_BP : 0x0000000000000000, TX_CORRUPT : 0x000000000000000F RX_PRT_INFO: 0x0000000000000000, GMX_STAT_BP: 0x0000000000000000 TX_INT_REG : 0x0000000000000000, TX_INT_EN : 0x0000000000000000 ADR_CAM0 : 0x0000000000000010 ADR_CAM1 : 0x0000000000000005 ADR_CAM2 : 0x00000000000000CA ADR_CAM3 : 0x000000000000002D ADR_CAM4 : 0x000000000000009B ADR_CAM5 : 0x0000000000000098 ADR_CTL : 0x000000000000000D, ull, I2C cmd Read fail at in slot 1 *Nov 21 16:05:22.363: EHWIC ESWGE I2C read error *Nov 21 16:05:22.527: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:22.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:23.471: %ESWCAM_EN : 0x00000000000000FF TXX_STAT0 : 0x0000000000000000, TXX_STAT1 : 0x0000000000000000 TXX_STAT2 : 0x0000000000000000, TXX_STAT3 : 0x0000000000000000 TXX_STAT4 : 0x0000000000000000, TXX_STAT5 : 0x0000000000000000 TXX_STAT6 : 0x000000GE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10000000000, TXX_STAT7 : 0x0000000000000000 TXX_STAT8 : 0x0000000000000000, TXX_STAT9 : 0x0000000000000000 PCS Registers: MRX_CTL_REG: 0x0000000000001140, MRX_STS_REG: 0x0000000000000178 RXX_STA_REG: 0x00000000000008C7, RXX_SYN_REG: 0x00000000000 *Nov 21 16:05:23.471: EHWIC ESWGE I2C read error *Nov 21 16:05:23.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:23.551: EHWIC ESWGE I2C read error *Nov 21 16:05:24.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1600003 TXX_STA_REG: 0x0000000000000064, SGMX_AN_ADV: 0x0000000000001801 SGMX_AN_ADV: 0x0000000000005801, MISC_CTL : 0x0000000000000000 ANX_ADV_REG: 0x0000000000000060, ANX_LP_ABIL: 0x0000000000005000 ANX_RESULTS: 0x0000000000000017, ANX_EXT_ST : 0x000000000000C000 LNX_TMR_CNT: 0x000000000000034A, TX_RXX_PLRT: :05:24.231: EHWIC ESWGE I2C read error 0x0000000000000000 INT_REG : 0x0000000000000000, INT_EN_REG : 0x0000000000000000 LOG_ANL_REG: 0x0000000000000000, ANX_ADV_REG: 0x0000000000000060 ANX_LP_ABIL: 0x0000000000005000, A *Nov 21 16:05:24.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:24.311: EHWIC ESWGE I2C read error *Nov 21 16:05:24.991: EHWIC ESWGE I2C read error *Nov 21 16:05:25.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0NX_RSL_REG: 0x0000000000000017 ANX_EXT_ST : 0x000000000000C000, LNX_TMR_CNT: 0x000000000000034A MISCX_CTL: 0x0000000000001801 ==============PIP Statistics================ PIP_RX_NO_ERR = 0, PIP_PARTIAL_ERR = 0 PIP_JABBER_ERR = 0, PIP_OVER_FCS_ERR = 0 PIP_OVER_ERR = 0, PIP_ALIGN_ERR = 0 PIP_UNDER_FCS_ERR = 0, PIP_GMX_FCS_ERR = 0 PIP_UNDER_ERR = 0, PIP_EXTEND_ERR = 0 PIP_LENGTH_ERR = 0, PIP_DAT_ERR = 0 PIP_SKIP_ERR = 0, PIP_NIBBLE_ERR = 0 5:25.071: EHWIC ESWGE I2C read errorUNKNOWN_ERR_15 = 0 *Nov 21 16:05:25.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:25.751: EHWIC ESWGE I2C read error *Nov 21 16:05:26.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:26.075: EHWIC ESWGE I2C read error *Nov 21 16:05:26.755: %ESWGE_ERR-3-CMD PIP_PIP_FCS = 0, PIP_PIP_SKIP_ERR = 0 PIP_PIP_L2_MAL_HDR = 0 pip_rx_no_particle = 0, pip_undef_err = 0 pip_rx_no_buf_start = 0 PHY REGISTERS: Display for CRC check for page:6 PACKET_GENERATION reg_addr: 16: 0x0010 CRC COUNTERS reg_addr: 17: 0x0000 page number:0 Copper Contrl @ reg_addr: 0: 0x2100 Copper Status @ reg_addr: 1: 0x7949 PHY Idf1 @ reg_addr: 2: 0x0141 PHY Idf2 @ reg_addr: 3: 0x0C97 Autoneg Adv @ reg_addr: 4: 0x0D41 Autoneg Lnk Ptr abty @ reg_addr: 5: 0x0000 Q_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:26.755: EHWIC ESWGE I2C read error *Nov 21 16:05:26.939: EHWIC ESWGE I2C read error *Nov 21 16:05:27.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:27.227: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:0 Autoneg Exp @ reg_addr: 6: 0x0004 Autoneg Nx Pg Tx @ reg_addr: 7: 0x2801 Autoneg Lk Prt Nx Pg @ reg_addr: 8: 0x0000 1000B-T Ctr @ reg_addr: 9: 0x0E00 1000B-T St @ reg_addr: 10: 0x0000 Copper Ext St @ reg_addr: 15: 0x3000 Copper Specific Ctl1 @ reg_addr: 16: 0x6060 Copper Specific St1 @ reg_addr: 17: 0x68405:27.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Copper Interrupt En @ reg_addr: 18: 0x0000 Copper Specific St2 @ reg_addr: 19: 0x0040 Copper Rcv Er Ctr @ reg_addr: 21: 0x0000 Copper Specific Ctl2 @ reg_addr: 26: 0x8040 pag *Nov 21 16:05:27.907: EHWIC ESWGE I2C read error *Nov 21 16:05:25:28.667: EHWIC ESWGE I2C read error 7.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:27.987: EHWIC ESWGE I2C read error *Nov 21 16:05:28.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0e number:1 Fiber Contrl @ reg_addr: 0: 0x1140 Fiber Status @ reg_addr: 1: 0x7949 PHY Idf1 @ reg_addr: 2: 0x0141 PHY Idf2 @ reg_addr: 3: 0x0C97 Autoneg Adv @ reg_addr: 4: 0x0060 Autoneg Lnk Ptr abty @ reg_addr: 5: 0x0000 Autoneg Exp @ reg_addr: 6: 0x0004 Autoneg Nx Pg Tx @ reg_addr: 7: 0x2001 Autoneg Lk Prt Nx Pg @ reg_addr: 8: 0x0000 Fiber Ext St @ reg_addr: 15: 0x3000 Fiber Specific Ctl1 @ reg_addr: 16: 0x0000 Fiber Specific St1 @ reg_addr: 17: 0x0010 Fiber Interrupt En @ reg_a *Nov 21 16:05:28.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:28.747: EHWIC ESWGE I2C read error *Nov 21 16:05:29.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:29.427: EHWIC ESWGE I2C read error *Nov 21 16:05:29.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd ddr: 18: 0x0000 Fiber Specific St2 @ reg_addr: 19: 0x0000 Fiber Rcv Er Ctr @ reg_addr: 21: 0x0000 Fiber Specific Ctl2 @ reg_addr: 26: 0x8085 page number:2 MAC Contrl @ reg_addr Read fail at in slot 1: 0: 0x1040 PHY Idf1 @ reg_addr: 2: 0x0141 PHY Idf2 @ reg_addr: 3: 0x0C97 MAC Specific Ctl1 @ reg_addr: 16: 0x0288 MAC Specific St1 @ reg_addr: 17: 0x0440 MAC Interrupt En @ reg_addr: 18: 0x0000 MAC Specific St2 @ reg_addr: 19: 0x0000 MAC Specific Ctl2 @ reg_addr: 26: 0x0005 TX_COUNT: 0, TX_LIMITED: *Nov 21 16:05:29.507: EHWIC ESWGE I2C read error *Nov 21 16:05:30.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:30.187: EHWIC ESWGE I2C read error *Nov 21 16:05:30.267: EHWIC ESWGE I2C read error *Nov 21 16:05:31.003: EHWIC ESWGE I2C read error *Nov 21 0, TX_HEAD: 0, TX_TAIL: 0 TX_MIN_SIZE: 32, TX_MAX_SIZE: 512, TX_CURRENT_SIZE: 128 RX STARVES: 0 Software MAC Address Filter (hash:length/addr/mask/hits) -------------------------------------------------------- 0x000: 0 ffff.ffff.ffff 0000.0000.0000 0 0x052: 0 1005.ca2d.9b98 0000.0000.0000 0 0x0A5: 0 0100.5e00.00fb 0000.0000.0000 0 0x0C0: 0 0180.c200.0002 0000.0000.0000 0 0x0C0: 1 0100.0ccc.cccc 0000.0000.0000 0 0x0C5: 0 0180.16:05:31.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:31.211: EHWIC ESWGE I2C read error *Nov 21 16:05:31.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:31.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2Cc200.0007 0000.0000.0000 0 0x0CC: 0 0180.c200.000e 0000.0000.0000 0 Software filtered frames: 0 Unicast overflow mode: 0 Multicast overflow mode: 1 Promiscuous mode: 0 Total Number of CAM entries: 1 Port Stopped: Y Internal Loopback Set: N Interface ISM0/0 Hardware is PSE2 HWIDB: 0x21C2EA7C INSTANCE: 0x3D4A6200, FASTSEND: 0x3029C4E0 Init flags: 0x23 FPGA registers ---------------- Base address: 0x18000000 Revision: 0x09063016 FPGA type: cmd Write fail at in slot 1 *Nov 21 16:05:32.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1or *Nov 21 16:05:32.051: EHWIC ESWGE I2C read error *Nov 21 16:05:32.131: EHWIC ESWGE I2C read error *Nov 21 16:05:32.811: *Nov 21 16:05:32.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:32.811: EHWIC ESWGE I2C read err 0x72676D69 FPGA_error_val: 0x00000000 Cfg MSI mask: 0x00000008 Rx_buffer_size: 0x00000600 Frame statistics: (polling enabled) ----------------------------------- tx_frame_cnt: 214 rx_frame_cnt: 172 tx_byte_cnt: 23139 rx_byte_cnt: 14414 tx_pause_frame_cnt: 0 rx_pause_frame_cnt: 0 rx_unicast_filtered_cnt: 0 rx_multicast_filtered_cnt: 6 rx_undersize_pkts: 0 *Nov 21 16:05:32.891: EHWIC ESWGE I2C read error *Nov 21 16:05:33.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:33.571: EHWIC ESWGE I2C read error *Nov 21 16:05:33.651: %ESWGE_ERR-3-CMDQ_FULL: Com rx_oversize_pkts: 0 tx_64_byte_pkts: 103 rx_64_byte_pkts: 66 tx_65_to_127_byte_pkts: 1 rx_65_to_127_byte_pkts: 73 tx_128_to_255_byte_pkts: 99 rx_128_to_255_byte_pkts: 33 tx_256_to_511_byte_pkts: 11 rx_256_to_511_byte_pkts: 0 tx_512_to_1023_byte_pkts: 0 rx_512_to_1023_byte_pkts: 0 tx_1024_to_1518_byte_pkts: 0 rx_1024_to_1518_byte_pkts: 0 rx_congestion_drop_cnt: 0 rx_mtusize_drop_cnt:mand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:33.651: EHWIC ESWGE I2C read error *Nov 21 16:05:34.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:34.331: EHWIC ESWGE I2C read error *Nov 21 16:05:34.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:34.411: EHW 0 rx_bad_cnt: 0 Interrupt statistics -------------------- ge_tx_interrupt: 153 ge_rx_interrupt: 140 txbd_seq_err: 0 txbd_done_err: 0 rxbd_done_err: 0 isIC ESWGE I2C read error l_inner_crc_err: 0 pcie_busmstr_dsbld_err: 0 pcie_tgt_abort_err: 0 pcie_mst_abort_err: 0 spi_done_event: 0 rx_empty_pak: 0 rx_sw_usage_err: 0 ing_buf_adrs_err: 0 pcie_null_pt *Nov 21 16:05:35.183: EHWIC ESWGE I2C read error *Nov 21 16:05:35.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:35.263: EHWIC ESWGE I2C read error *Nov 21 16:05:35.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:r_err: 0 uart_tx_intr: 0 uart_rx_intr: 0 uart_break_detected: 0 uart_framing_err: 0 uart_bad_egr_adrs: 0 uart_egr_overflow: 0 i2c_errs: misc/nack/tmo: 0/0/0 txbd_seq_err: 0 TX ring ------- Tx Ring txr_head/txr_tail: 220/220 Tx Shadow txs_head/txs_tail/txs_free: 220/220/256 Tx Ring(txr): 0x0D790800 Tx Shadow (malloc): 0x21C2F98C Tx Limited: 0 Tx Count: 0 hold_pak: 0x0 Con05:35.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:36.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:36.103: EHWIC ESWGE I2C read error *Nov 21 16:05:36.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd R read error ead fail at in slot 1 *Nov 21 16:05:36.259: EHWIC ESWGE I2Cgested: 0 mci_count 256 RX rings -------- size: 256 *Nov 21 16:05:36.939: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1max_spin_size 32 head: 171 Rx Ring(rxr): 0xD790000 rxr_malloc: 0xD790000 Rx Shadow(rxs): 0x3D4A64DC rxs_malloc: 0x3D4A64DC Software MAC Address Filter (hash:length/addr/mask/hits) -------------------------------------------------------- 000: 0 ffff.ffff.ffff 0000.0000.0000 103 002: 0 1005.ca2d.9bc8 0000.0000.0000 0 091: 0 0100.5e00.0005 0000.0000.0000 0 165: 0 0100.5e00.00fb *Nov 21 16:05:36.939: EHWIC ESWGE I2C read error *Nov 21 16:05:37.019: EHWIC ESWGE I2C read error *Nov 21 16:05:37.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai 0000.0000.0000 0 192: 0 0180.c200.0002 0000.0000.0000 0 192: 1 0100.0ccc.cccc 0000.0000.0000 0 197: 0 0180.c200.0007 0000.0000.0000 0 204: 0 0180.c200.000e 0000.0000.0000 0 Software filtered frames: 0 Unicast overflow mode: 0 Multicast overflow mode: 1 Promiscuous mode: 0 HW MAC Address Filter --------------------- Unicast Addr0: 1005.CA2D.9BC8 Unicast Addr1: 0000.0000.0100 Unicast Addr2: 00l at in slot 1 *Nov 21 16:05:37.699: EHWIC ESWGE I2C read error *Nov 21 16:05:37.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:37.779: EHWIC ESWGE I2C read error *Nov 21 16:05:38.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:38.459: EHWIC ESWGE I2C read error *Nov 21 1600.0000.0100 Unicast Addr3: 0000.0000.0100 Unicast Addr4: 0000.0000.0100 Unicast HW Filter Count : 1 Multicast Hash b63_32: 0x2000301 Multicast Hash b32_00: 0x00 HW unicast filter enabled: Yes HW multicast filter enabled: Yes FPGA upgrade info ----------------- Golden area fpga version: 09063016 Upgrade area fpga version: 09063016 IOS bundled fpga version: 09063016 Interface GigabitEthernet0/1 = Hardware = Hardware is PLATFORM SGMII INTERFACE HWIDB: 21B:05:38.539: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:38.539: EHWIC ESWGE I2C read error *Nov 21 16:05:39.367: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:39.367: EHWIC ESWGE I2C read error *Nov 21 16:05:39.447: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai5055C, INSTANCE: 21B51280, FASTSEND: 3001FA5C, MCI_INDEX: 0 Route Cache Flag: 11 = Media Media Change Count: 0 PORT IPD Registers: BP_PAGE_CNT: 0x0000000000000001, BP_CNTS_PRX: 0x0000000000000000 GMX Registers: RXX_INT_REG: 0x0000000000000l at in slot 1000, RXX_INT_EN : 0x0000000000000000 PRTX_CFG : 0x000000000000300E, RXX_FRM_CTL: 0x0000000000000077 RXX_FRM_CHK: 0x00000000000003BA, RXX_FRM_MIN: 0x0000000000000000 RXX_FRM_MAX: 0x0000000000000000, RXX_JABBER : 0x0000000000002580 RXX_DECISIO: 0 *Nov 21 16:05:39.447: EHWIC ESWGE I2C read error *Nov 21 16:05:39.527: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:39.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:40.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue ix0000000000000018, RXX_FRM_CTL: 0x0000000000000077 RXX_FRM_CHK: 0x00000000000003BA, RXX_JABBER : 0x0000000000002580 RXX_DECISs Full, I2C cmd Read fail at in slot 1IO: 0x0000000000000018, RXX_UDD_SKI: 0x0000000000000000 RXX_STATS_C: 0x0000000000000000, RXX_IFG : 0x0000000000000008 RXX *Nov 21 16:05:40.387: EHWIC ESWGE I2C read error _PAU_DRP: 0x0000000000000000, RXX_STATS_P: 0x0000000000000000 RXX_STAT_CT: 0x0000000000000000, RXX_STATS_D: 0x0000000000000000 RXX_STAT_DR: 0x0000000000000000, RXX_STATS_B: 0x0000000000000000 SMACX : 0x00001005CA2D9B99 TXX_SGMII_C: 0x0000000 *Nov 21 16:05:40.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:40.467: EHWIC ESWGE I2C read error 000000001, TXX_CTL : 0x0000000000000003LL: Command queue is Full, I2C cmd Read fail at in slot 1 RX_PRTS : 0x0000000000000004, RX_BP_DROP : 0x0000000000000002 RX_BP_ON : 0x0000000000000040, RX_BP_OFF : 0x0000000000000010 TXX_PAU_PKT: 0x0000000000000060, TXX_MIN_PKT: 0x000000000000003B TXX_PAU_PKI: 0x0000000000000010, TXX_SOFTPAU: 0x0000000000000000 TXX_PAU_TGO: 0x0000000000000000, TXX_PAU_ZRO: 0x0000000000000001 INF_MODE : 0x0000000000000022, TX_PRTS : 0x0000000000000004 TX_IFG : 0x0000000000000048, TX_JAM : 0x00000000000000EE *Nov 21 16:05:41.147: EHWIC ESWGE I2C read error *Nov 21 16:05:41.275: EHWIC ESWGE I2C read error *Nov 21 16:05:41.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:41.955: EHWIC ESWGE I2C read error *Nov 21 16:05:42.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:42.035: EH TX_COL_ATMP: 0x0000000000000010, TX_PAU_DMAC: 0x00000180C2000001 TX_PAU_TYPE: 0x0000000000008808, TX_OVR_BP : 0x0000000000000B0B TX_BP : 0x0000000000000000, TX_CORRUPT : 0x000000000000000F RX_PRT_INFO: 0x0000000000000000, GMX_STAT_BP: 0x0000000000000000 TX_INT_REG : 0x0000000000000000, TX_INT_EN : 0x0000000000000000 ADR_CAM0 : 0x0000000000000010 ADR_CAM1 : 0x0000000000000005 ADR_CAM2 : 0x00000000000000CA ADR_CAM3 : 0x000000000000002D ADR_CAM4 : 0x000000000000009B ADRWIC ESWGE I2C read error *Nov 21 16:05:42.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:42.715: EHWIC ESWGE I2C read error *Nov 21 16:05:42.795: EHWIC ESWGE I2C read error *Nov 21 16:05:43.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 _CAM5 : 0x0000000000000099ESWGE I2C read error ADR_CTL : 0x000000000000000D, CAM_EN : 0x00000000000000FF TXX_STAT0 : 0x0000000000000000, TXX_STAT1 : 0x0000000000000000 TXX_STAT2 : 0x0000000000000000, TXX_STAT3 : 0x0000000000000000 TXX_STAT4 : 0x0000000000000000, TXX_STAT5 : 0x0000000000000000 TXX_STAT6 : 0x0000000000000000, TXX_STAT7 : 0x0000000000000000 TXX_STAT8 : 0x0000000000000000, TXX_STAT9 : 0x0000000000000000 PCS Registers: MRX_CTL_REG: 0x0000000000001140, MRX_STS_REG: 0x00000000000001 *Nov 21 16:05:43.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:43.555: EHWIC ESWGE I2C read error *Nov 21 16:05:43.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:43.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is68 RXX_STA_REG: 0x0000000000001CC7, RXX_SYN_REG: 0x0000000000000003 TXX_STA_REG: 0x0000000000000064, SGMX_AN_ADV: 0x0000000000001801 SGMX_AN_ADV: 0x0000000000004801, MISC_CTL : 0x0000000000000000 ANX_ADV_REG: 0x0000000000000060, ANX_LP_ABIL: 0x0000000000004000 ANX_RESULTS: 0x0000000000000015, ANX_EXT_ST : 0x0 Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:44.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100000000000C000 LNX_TMR_CNT: 0x000000000000034A, TX_RXX_PLRT: 0x0000000000000000 INT_REG : 0x0000000000000000, INT_EN_REG : 0x0000000000000000 LOG_ANL_REG: 0x0000000000000000, ANX_ *Nov 21 16:05:44.643: EHWIC ESWGE I2C read error *Nov 21 16:05:44.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:44.723: EHWIC ESWGE I2C read error *Nov 21 16:05:45.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0ADV_REG: 0x0000000000000060 ANX_LP_ABIL: 0x0000000000004000, ANX_RSL_REG: 0x0000000000000015 ANX_EXT_ST : 0x000000000000C000, LNX_TMR_CNT: 0x000000000000034A MISCX_CTL: 0x0000000000001801 ==============PIP Statistics================ PIP_RX_NO_ERR = 0, PIP_PARTIAL_ERR = 0 PIP_JABBER_ERR = 0, PIP_OVER_FCS_ERR = 0 PIP_OVER_ERR = 0, PIP_ALIGN_ERR = 0 PIP_UNDER_FCS_ERR = 0, PIP_GMX_FCS_ERR = 0 PIP_UNDER_ERR = 0, PIP_EXTEND_ERR = 0 PIP_LENGTH_ERR = 0, PIP_DAT_ERR = 0 PIP_SKIP_ERR = 0, PIP_5:45.403: EHWIC ESWGE I2C read error *Nov 21 16:05:45.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:45.483: EHWIC ESWGE I2C read error *Nov 21 16:05:46.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:46.163: EHWIC ESWGE I2C read error *Nov 21 16:05:46.339: EHWIC ESWGE I2C rNIBBLE_ERR = 0 PIP_UNKNOWN_ERR_14 = 0, PIP_UNKNOWN_ERR_15 = 0 PIP_PIP_FCS = 0, PIP_PIP_SKIP_ERR = 0 PIP_PIP_L2_MAL_HDR = 0 pip_rx_no_particle = 0, pip_undef_err = 0 pip_rx_no_buf_start = 0 PHY REGISTERS: Display for CRC check for page:6 PACKET_GENERATION reg_addr: 16: 0x0010 CRC COUNTERS reg_addr: 17: 0x0000 page number:0 Copper Contrl @ reg_addr: 0: 0x1940 Copper Status @ reg_addr: 1: 0x7949 PHY Idf1 @ reg_addr: 2: 0x0141 PHY Idf2 @ reg_addr: 3: 0x0C97 Autoneg Adv @ reead error *Nov 21 16:05:47.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:47.019: EHWIC ESWGE I2C read error *Nov 21 16:05:47.099: EHWIC ESWGE I2C read error *Nov 21 16:05:47.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:47.779: EHWIC ESWGE I2C read error *Nov 21 16:05g_addr: 4: 0x0DE1 Autoneg Lnk Ptr abty @ reg_addr: 5: 0x0000 Autoneg Exp @ reg_addr: 6: 0x0004 Autoneg Nx Pg Tx @ reg_addr: 7: 0x2801 Autoneg Lk Prt Nx Pg @ reg_addr: 8: 0x0000 1000B-T Ctr @ reg_addr: 9: 0x0E00 1000B-T St @ reg_addr: 10: 0x4000 Copper Ext St @ reg_addr: 15: 0x3000 Copper Specific Ctl1 @ reg_addr: 16: 0x6060 Copper Specific St1 @ reg_addr: 17: 0x8040 Copper Interrupt En @ reg_addr: 18: 0x0000 Copper Specific St2 @ reg_addr: 19: 0x0040 Copper Rcv Er Ctr @ reg_addr: 21:47.859: EHWIC ESWGE I2C read error *Nov 21 16:05:47.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:48.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:48.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd: 0x0000 Copper Specific Ctl2 @ reg_addr: 26: 0x8040 page number:1 Fiber Contrl @ reg_addr: 0: 0x1940 Fiber Status @ reg_addr: 1: 0x7949 PHY Idf1 @ reg_addr: 2: 0x0141 PHY Idf2 @ reg_addr: 3: 0x0C97 Autoneg Adv @ reg_addr: 4: 0x0060 Au Read fail at in slot 1toneg Lnk Ptr abty @ reg_addr: 5: 0x0000 Autoneg Exp @ reg_addr: 6: 0x0004 Autoneg Nx Pg Tx @ reg_addr: 7: 0x2001 Autoneg L *Nov 21 16:05:48.911: EHWIC ESWGE I2C read error k Prt Nx Pg @ reg_addr: 8: 0x0000 Fiber Ext St @ reg_addr: 15: 0x3000 Fiber Specific Ctl1 @ reg_addr: 16: 0x0000 Fiber *Nov 21 16:05:48.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:48.991: EHWIC ESWGE I2C read error *Nov 21 16:05:49.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:49.671: EHWIC ESWGE I2C read error *Nov 21 16:05:49.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmdSpecific St1 @ reg_addr: 17: 0x0010 Fiber Interrupt En @ reg_addr: 18: 0x0000 Fiber Specific St2 @ reg_addr: 19: 0x0000 Fiber Rcv Er Ctr @ reg_addr: 21: 0x0000 Fiber Specific Ctl2 @ reg_addr: 26: 0x8085 page number:2 MAC Contrl @ reg_addr: 0: 0x1840 PHY Idf1 @ reg_addr: 2: 0x0141 PHY Idf2 @ reg_addr: 3: 0x0C97 MAC Specific Ctl1 @ reg_addr: 16: 0x0288 MAC Specific St1 @ reg_addr: 17: 0x0440 MAC Interrupt En @ reg_addr: 18: 0x0000 MAC Specific St2 @ reg_addr: 19: 0x0000 MAC Sp Read fail at in slot 1 *Nov 21 16:05:49.751: EHWIC ESWGE I2C read error *Nov 21 16:05:50.431: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:50.431: EHWIC ESWGE I2C read error *Nov 21 16:05:50.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:50.511: EHWIC ESWGE I2C read error *ecific Ctl2 @ reg_addr: 26: 0x0005 TX_COUNT: 0, TX_LIMITED: 0, TX_HEAD: 0, TX_TAIL: 0 TX_MIN_SIZE: 32, TX_MAX_SIZE: 512, TX_CURRENT_SIZE: 128 RX STARVES: 0 Software MAC Address Filter (hash:length/addr/mask/hits) -------------------------------------------------------- 0x000: 0 ffff.ffff.ffff 0000.0000.0000 0 0x053: 0 1005.ca2d.9b99 0000.0000.0000 0 0x0C0: 0 0180.c200.0002 0000.0000.0000 0 0x0C0: 1 0100.0ccc.cccc 0000.0000.0000 0 0x0C5: Nov 21 16:05:51.191: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:51.191: EHWIC ESWGE I2C read error *Nov 21 16:05:51.327: EHWIC ESWGE I2C read error *Nov 21 16:05:52.007: EHWIC ESWGE I2C read error *Nov 21 16:05:52.175: EHWIC ESWGE I2C read error *Nov 21 16:05:52.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd 0 0180.c200.0007 0000.0000.0000 0 0x0CC: 0 0180.c200.000e 0000.0000.0000 0 Software filtered frames: 0 Unicast overflow mode: 0 Multicast overflow mode: 1 Promiscuous mode: 0 Total Number of CAM entries: 1 Port Stopped: Y Internal Loopback Set: N Controller GigabitEthernet0/1/0 EHWIC registers: id : 0x00000002, rev : 0x00000000 status : 0x00000080, control : 0x0000CA00 Interrupt Event : 0x0000 Write fail at in slot 1 *Nov 21 16:05:52.463: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:53.143: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:53.143: EHWIC ESWGE I2C read error *Nov 21 16:05:53.223: %ESWGE_ERR-3-CM0000, scratch : 0x00000000 Fatal Error : 0x00000000 Low level status : 0x00000808, Core reset control: 0x00000000 NIOS reset control: 0x00000000, NIOS PC : 0x0000402C FPGA registers: Hardware/Version : 0x08030600, NIOS II Interrupt status: 0x00002410 NIOS II InteDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1rrupt enable: 0x00000000, NIOS II Interrupt test : 0x00000000 Host interrupt status : 0x00020400, Host interrupt enable : 0x00000000 Host interrupt test : 0x00000000, Reset *Nov 21 16:05:53.223: EHWIC ESWGE I2C read error *Nov 21 16:05:53.903: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:53.903: EHWIC ESWGE I2C read error *Nov 21 16:05:53.983: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16control : 0x0000070F SRAM parity error addr : 0x0F000000, SRAM parity error data : 0xFFFFFFFF CMD Queue: Read Index: 62, Write Index: 61 IRQ count: Host to NIOS IRQs: 0, PHY IRQ: 61, Switch IRQ: 32 POE IRQ: 0, Other NIOS IRQs: 0 NIOS: SMI read count: 3915, SMI read errors: 0 SMI write count: 5212, SMI write errors: 0 DMA Q count: 0, DMA Q Max count: 3, DMA IRQ: 816 PHY read errors: 0, Link Event errors: 0 I2C read count: 589729, I2C read errors: 0 I2C write cou:05:53.983: EHWIC ESWGE I2C read error *Nov 21 16:05:54.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:54.675: EHWIC ESWGE I2C read error *Nov 21 16:05:54.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:54.771: EHWIC ESWGE I2C read error *Nov 21 16:05:55.451: %ESWGE_ERR-3-Cnt: 179,I2C write errors: 0 I2C reset count: 0,I2C reset fail: 0 Stats IOS busy: 0, Stats data err: 0 POE Registers DevicMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1e 0 *Nov 21 16:05:55.451: EHWIC ESWGE I2C read error *Nov 21 16:05:55.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:55.531: EHWIC ESWGE I2C read error *Nov 21 16:05:56.211: EHWIC ESWGE I2C read error *Nov 21 16:05:56.507: %ESWGE_ERR-3-CMDQ_FULL: CoCommand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:05:57.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1mmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 *Nov 21 16:05:57.347: EHWIC ESWGE I2C read error :05:56.507: EHWIC ESWGE I2C read error *Nov 21 16:05:56.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fa *Nov 21 16:05:57.427: EHWIC ESWGE I2C read error il at in slot 1 *Nov 21 16:05:56.667: %ESWGE_ERR-3-CMDQ_FULL: *Nov 21 16:05:58.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:58.107: EHWIC ESWGE I2C read error *Nov 21 16:05:58.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:58.187: EHWIC ESWGE I2C read error *Nov 21 16:05:58.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16r :05:58.867: EHWIC ESWGE I2C read error *Nov 21 16:05:58.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai *Nov 21 16:05:59.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1l at in slot 1 *Nov 21 16:05:58.947: EHWIC ESWGE I2C read erro *Nov 21 16:05:59.627: EHWIC ESWGE I2C read error *Nov 21 16:05:59.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:05:59.707: EHWIC ESWGE I2C read error *Nov 21 16:06:00.427: EHWIC ESWGE I2C read error *Nov 21 16:06:00.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C ct 1md Read fail at in slot 1 *Nov 21 16:06:00.635: EHWIC ESWGE I2C read error *Nov 21 16:06:00.715: %ESWGE_ERR-3-CMDQ_FULL: Co *Nov 21 16:06:01.475: EHWIC ESWGE I2C read error mmand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:00.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C *Nov 21 16:06:01.555: EHWIC ESWGE I2C read error cmd Write fail at in slot 1 *Nov 21 16:06:01.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slo *Nov 21 16:06:02.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:02.235: EHWIC ESWGE I2C read error *Nov 21 16:06:02.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:02.315: EHWIC ESWGE I2C read error *Nov 21 16:06:02.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:02.995: EHWIC ESWGE I2r C read error *Nov 21 16:06:03.075: %ESWGE_ERR-3-CMDQ_FULL: Co *Nov 21 16:06:03.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1mmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 *Nov 21 16:06:03.835: EHWIC ESWGE I2C read error :06:03.075: EHWIC ESWGE I2C read error *Nov 21 16:06:03.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai *Nov 21 16:06:04.515: EHWIC ESWGE I2C read error l at in slot 1 *Nov 21 16:06:03.755: EHWIC ESWGE I2C read erro *Nov 21 16:06:04.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:04.667: EHWIC ESWGE I2C read error *Nov 21 16:06:04.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c Command queue is Full, I2C cmd Read fail at in slot 1md Write fail at in slot 1 *Nov 21 16:06:04.827: %ESWGE_ERR-3- *Nov 21 16:06:06.267: EHWIC ESWGE I2C read error CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:05.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue *Nov 21 16:06:06.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:05.507: EHWIC ESWGE I2C read error *Nov 21 16:06:05.587: EHWIC ESWGE *Nov 21 16:06:06.291: EHWIC ESWGE I2C read error I2C read error *Nov 21 16:06:06.267: %ESWGE_ERR-3-CMDQ_FULL: *Nov 21 16:06:06.347: EHWIC ESWGE I2C read error *Nov 21 16:06:06.499: EHWIC ESWGE I2C read error *Nov 21 16:06:06.635: EHWIC ESWGE I2C read error *Nov 21 16:06:06.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fairor l at in slot 1 *Nov 21 16:06:06.715: EHWIC ESWGE I2C read error *Nov 21 16:06:06.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue *Nov 21 16:06:07.271: EHWIC ESWGE I2C read error is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:06.795: EHWIC ESWGE I2C read error *Nov 21 16:06:06.875: EHWIC ESWGE *Nov 21 16:06:07.475: EHWIC ESWGE I2C read error I2C read error *Nov 21 16:06:07.135: EHWIC ESWGE I2C read er POE Registers Device 1 *Nov 21 16:06:07.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:07.667: EHWIC ESWGE I2C read error *Nov 21 16:06:07.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:07.747: EHWIC ESWGE I2C read error *Nov 21 16:06:07.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:07.827: EHWIC ESWGE I2C read error *Nov 21 16:06:07.907: EHWIC ESWGE I2C read error *Nov 21 16:06:08.039: EHWIC ESWGE I2C read error *Nov 21 L: Command queue is Full, I2C cmd Read fail at in slot 116:06:08.303: EHWIC ESWGE I2C read error *Nov 21 16:06:08.435: EHWIC ESWGE I2C read error *Nov 21 16:06:08.587: EHWIC ESWG *Nov 21 16:06:08.683: EHWIC ESWGE I2C read error E I2C read error *Nov 21 16:06:08.683: %ESWGE_ERR-3-CMDQ_FUL *Nov 21 16:06:08.719: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:08.719: EHWIC ESWGE I2C read error *Nov 21 16:06:08.831: EHWIC ESWGE I2C read error *Nov 21 16:06:09.039: EHWIC ESWGE I2C read error *Nov 21 16:06:09.247: EHWIC ESWGE I2C read error *Nov 21 16:06:09.507: EHWIC ESWGE I2C read error *Nov 21 16:06:09.595: EHWIC ESWGE ror I2C read error *Nov 21 16:06:09.747: %ESWGE_ERR-3-CMDQ_FULL: *Nov 21 16:06:09.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:09.747: EHWIC ESWGE I2C read error *Nov 21 16:06:09.791 *Nov 21 16:06:09.827: EHWIC ESWGE I2C read error : %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:09.791: EHWIC ESWGE I2C read er *Nov 21 16:06:09.871: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:09.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:09.971: EHWIC ESWGE I2C read error *Nov 21 16:06:10.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:10.295: %ESWGE_ERR-3-ot 1CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:10.295: EHWIC ESWGE I2C read error *Nov 21 1 *Nov 21 16:06:10.771: EHWIC ESWGE I2C read error 6:06:10.499: EHWIC ESWGE I2C read error *Nov 21 16:06:10.691: EHWIC ESWGE I2C read error *Nov 21 16:06:10.771: %ESWGE_ERR- *Nov 21 16:06:10.843: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 13-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in sl *Nov 21 16:06:10.843: EHWIC ESWGE I2C read error *Nov 21 16:06:10.955: EHWIC ESWGE I2C read error *Nov 21 16:06:11.091: EHWIC ESWGE I2C read error *Nov 21 16:06:11.355: EHWIC ESWGE I2C read error *Nov 21 16:06:11.559: EHWIC ESWGE I2C read error *Nov 21 16:06:11.695: EHWIC ESWGE I2C read error *Nov 21 16:06:11.775: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot Command queue is Full, I2C cmd Read fail at in slot 1 1 *Nov 21 16:06:11.775: EHWIC ESWGE I2C read error *Nov 21 16:06:11.775: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C *Nov 21 16:06:11.855: EHWIC ESWGE I2C read error cmd Read fail at in slot 1 *Nov 21 16:06:11.775: EHWIC ESWGE I2C read error *Nov 21 16:06:11.855: %ESWGE_ERR-3-CMDQ_FULL: *Nov 21 16:06:11.855: EHWIC ESWGE I2C read error *Nov 21 16:06:11.971: EHWIC ESWGE I2C read error *Nov 21 16:06:12.179: EHWIC ESWGE I2C read error *Nov 21 16:06:12.387: EHWIC ESWGE I2C read error *Nov 21 16:06:12.607: EHWIC ESWGE I2C read error *Nov 21 16:06:12.727: EHWIC ESWGE I2C read error *Nov 21 16:06:12.847: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot Command queue is Full, I2C cmd Read fail at in slot 1 1 *Nov 21 16:06:12.847: EHWIC ESWGE I2C read error *Nov 21 16:06:12.923: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C *Nov 21 16:06:12.927: EHWIC ESWGE I2C read error cmd Read fail at in slot 1 *Nov 21 16:06:12.923: EHWIC ESWGE I2C read error *Nov 21 16:06:12.927: %ESWGE_ERR-3-CMDQ_FULL: *Nov 21 16:06:13.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:13.007: EHWIC ESWGE I2C read error *Nov 21 16:06:13.087: EHWIC ESWGE I2C read error *Nov 21 16:06:13.279: EHWIC ESWGE I2C read error *Nov 21 16:06:13.487: EHWIC ESWGE I2C read error *Nov 21 16:06:13.679: EHWIC ESWGE I2C read error *Nov 21 16:06:13.771: EHWIC ESWGE I2C read error *Nov 21 16:06:13.867: %ESWGE_ERR-3-CMDQ_FULL: ror Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:13.867: EHWIC ESWGE I2C read error *Nov 21 16:06:13.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:13.907: EHWIC ESWGE I2C read er *Nov 21 16:06:13.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:13.947: EHWIC ESWGE I2C read error *Nov 21 16:06:13.987: %ESWGE_ERR-3-Ct 1 *Nov 21 16:06:14.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1MDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:14.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is *Nov 21 16:06:14.283: EHWIC ESWGE I2C read error Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:14.027: EHWIC ESWGE I2C read error *Nov 21 16:06:14.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slo FPGA upgrade spi operation not done on hwic_slot 1 status reg *Nov 21 16:06:14.487: EHWIC ESWGE I2C read error 0xA ESWGE FPGA VERSIONS in hwic slot 1 --------------------------------------- Golden area fpga version: 00000000 Upgrade area fpga version: 00FFFFFF IOS bundled fpga version: 00030600 Running fpga version is : 00030600 CPU port: Statistics for slot:1, switch port:9 ----------------------------------------------------- 30 second input rate 7 packets/sec 30 second output rate 0 packets/sec 2719 packets input, 257552 bytesWIC ESWGE I2C read error , 0 overruns Received 28 broadcasts, 1823 multicast, 868 unica *Nov 21 16:06:14.871: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:14.871: EHst 0 runts, 0 giants, 0 jabbers 0 input errors, 0 CRC, 0 fragm *Nov 21 16:06:14.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ents, 0 pause input 914 packets output, 110325 bytes, 0 underruns 152 broadcast, 233 multicast, 529 unicast 0 late collisions, 0 collisions, 0 deferred 0 bad bytes received, 0 multiple, 0 pause output Switch egress queues drop count register(READ CLEAR): 0x0 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 *Nov 21 16:06:14.951: EHWIC ESWGE I2C read error *Nov 21 16:06:14.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:14.951: EHWIC ESWGE I2C read error *Nov 21 16:06:15.095: EHWIC ESWGE I2C read error *Nov 21 16:06:15.299: EHWIC ESWGE I2C read error *Nov 21 16:06:15.563: EHWIC ESWGE I2C read error *Nov 21 16:06 Copper status reg (reg 1 ) is : 0x0 :15.699: EHWIC ESWGE I2C read error Copper ctrl reg1 (reg 16) is : 0x0 Copper status reg1 (reg 17) is : 0x0 Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 Controller GigabitEthernet0/1/1 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 *Nov 21 16:06:15.835: EHWIC ESWGE I2C read error *Nov 21 16:06:15.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:15.895: EHWIC ESWGE I2C read error *Nov 21 16:06:15.967: %ESWGE_ERR-3-CMDQ Copper status reg (reg 1 ) is : 0x0 Copper ctrl reg1 (reg 16) is : 0x0 Copper status reg1 (reg 17) is : 0x0 I_FULL: Command queue is Full, I2C cmd Read fail at in slot 1nterrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg *Nov 21 16:06:15.967: EHWIC ESWGE I2C read error 26) is : 0x0 Controller GigabitEthernet0/1/2 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 Copper status reg (reg 1 ) is : 0x0 Copper ctrl reg1 (reg 16) is : 0x0 Copper status reg1 (reg 17) is : 0x0 *Nov 21 16:06:15.975: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:15.975: EHWIC ESWGE I2C read error *Nov 21 16:06:16.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:16.047: EHWIC ESWGE I2C read error *Nov 21 16:06:16.251: EHWI Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 Controller GigabitEthernet0/1/3 PHY registers : C ESWGE I2C read error Copper ctrl reg (reg 0 ) is : 0x0 Copper status reg (reg 1 ) is : 0x0 Copper ctrl reg1 (reg 16) is : 0x0 *Nov 21 16:06:16.455: EHWIC ESWGE I2C read error *Nov 21 16:06:16.663: EHWIC ESWGE I2C read error *Nov 21 16:06:16.799: EHWIC ESWGE I2C read error *Nov 21 16:06:16.935: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:16.935: EHWIC ESWGE I2C read error *Nov 21 16:06:16.935: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C Copper status reg1 (reg 17) is : 0x0 Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 Controller GigabitEthernet0/1/4 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 Copper status reg (reg 1 ) is : 0x0 Copper ctrl reg1 (reg 16) is : 0x0 Copper statuscmd Read fail at in slot 1 reg1 (reg 17) is : 0x0 Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 Controller GigabitEthernet0/1/5 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 Copper status reg (reg 1 ) is : 0x0 Copper ctrl reg1 (reg 16) is : 0x0 *Nov 21 16:06:16.935: EHWIC ESWGE I2C read error *Nov 21 16:06:17.015: %ESWGE_ERR-3-CMDQ Read fail at in slot 1_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:17.015: EHWIC ESWGE I2C read error *Nov 21 16:06:17.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Copper status reg1 (reg 17) is : 0x0 Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 Controller GigabitEthernet0/1/6 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 Copper status reg (reg 1 ) is *Nov 21 16:06:17.095: EHWIC ESWGE I2C read error : 0x0 Copper ctrl reg1 (reg 16) is : 0x0 Copper status reg1 (reg 17) is : 0x0 Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 Controller GigabitEthernet0/1/7 PHY registers : Copper ctrl reg (reg 0 ) is : 0x0 *Nov 21 16:06:17.291: EHWIC ESWGE I2C read error *Nov 21 16:06:17.499: EHWIC ESWGE I2C read error *Nov 21 16:06:17.759: EHWIC ESWGE I2C read error *Nov 21 16:06:17.851: EHWIC ESWGE I2C read error *Nov 21 16:06:17.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in Copper status reg (reg 1 ) is : 0x0 slot 1 *Nov 21 16:06:17.947: EHWIC ESWGE I2C read error *Nov 21 16:06:17.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Copper ctrl reg1 (reg 16) is : 0x0 Copper status reg1 (reg 17) is : 0x0 Interrupt ena reg (reg 18) is : 0x0 Copper status reg3 (reg 26) is : 0x0 ------------------ show user ------------------ ------------------ show file systems ------------------ File Systems: Size(b) Free(b) Type Flags Prefixes - - opaque rw archive: - - opaque rw system: - - op *:06:18.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1Nov 21 16:06:17.987: EHWIC ESWGE I2C read error *Nov 21 16aque rw tmpsys: - - opaque *Nov 21 16:06:18.027: EHWIC ESWGE I2C read error rw null: - - network rw tftp: * 256483328 144334848 disk rw flash0: flash:# - - disk rw flash1: 262136 240055 nvram rw nvram: - - opaque wo syslog: - - opaque rw xmodem: - - opaque rw ymodem: - - *Nov 21 16:06:18.067: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:18.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 network rw rcp: - - network rw pram: - - network rw *Nov 21 16:06:18.107: EHWIC ESWGE I2C read error http: - - network rw ftp: - - network rw scp: *Nov 21 16:06:18.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1- - opaque ro tar: - - network rw https: - - opaque ro cns: ------------------ show file descriptors ------------------ File Descriptors: FD Positio *Nov 21 16:06:18.247: EHWIC ESWGE I2C read error *Nov 21 16:06:20.191: %SYS-3-CPUHOG: Task is running for (2004)msecs, more than (2000)msecs (1/1),process = Exec. -Traceback= 0x30DAD308z 0x30951128z 0x309515A8z 0x30951614z 0x30946198z 0x3094624Cz 0x3n Open PID Path No open file descriptors ------------------ show flash0: all ------------------ -#- --length-- -----date/time------ path 1 97114876 Apr 11 2014 13:30:08 +05:1A8E514z 0x31A126DCz 0x31A19370z 0x319E86F4z 0x319E8878z 0x31A126DCz 0x31A19370z 0x31A2A07Cz 0x332E4090z 0x332E4074z *Nov 21 16:06:22.195: %SYS-3-CPUHOG: Task is running for (4004)msecs, more than (2000)msecs (2/1),process = Exec. -Traceback= 0x30DAD304z 0x30951128z 0x309515A8z 0x30951614z 0x30946198z 0x3094624Cz 0x31A8E514z 0x31A126DCz 0x31A19370z 0x319E86F4z 0x319E8878z 0x31A126DCz 0x31A19370z 0x31A2A07Cz 0x332E4090z 0x332E4074z 00 c2900-universalk9-mz.SPA.154-1.T1.bin 2 3064 Apr 11 2014 13:42:44 +05:00 cpconfig-29xx.cfg 3 720 Nov 17 2014 18:55:46 +05:00 vlan.dat 4 0 Apr 11 2014 13:43:00 +05:00 ccpexp 5 0 Apr 11 2014 13:43:00 +05:00 ccpexp/external 6 0 Apr 11 2014 13:43:00 +05:00 ccpexp/e *Nov 21 16:06:23.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:23.355: EHWIC ESWGE I2C read error *Nov 21 16:06:23.607: EHWIC ESWGE I2C read error *Nov 21 16:06:23.815: %ESWGE_ERR-3-CMDQ_FULL: Coxternal/development-bundle 7 0 Apr 11 2014 13:43:00 +05:00 ccpexp/external/development-bundle/themes 8 0mmand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:24.167: %ESWGE_ERR-3-SPI_OPER_ERR: SPI PROM Read or Write Operation failed in hwic slot 0/1/0 *Nov 21 16:06:24.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Apr 11 2014 13:43:00 +05:00 ccpexp/external/development-bundle/themes/flick 9 0 Apr 11 2014 13:43:00 +05:00 ccpexp/external/development-bundle/themes/flick/images 10 180 Apr 11 2014 13:43:04 +05:00 ccpexp/external/development-bundle/themes/flick/images/ui-bg_flat_0_aaaaaa_40x100.png 11 180 Apr 11 2014 13:43:04 +05:00 ccpexp/external/development-bundl *Nov 21 16:06:24.495: EHWIC ESWGE I2C read error *Nov 21 16:06:24.575: EHWIC ESWGE I2C read error *Nov 21 16:06:24.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fae/themes/flick/images/ui-bg_flat_0_eeeeee_40x100.png 12 178 Apr 11 2014 13:43:04 +05:00 ccpexp/external/development-bundlil at in slot 1 *Nov 21 16:06:25.119: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, SMI cmd Read fail at in slot 1 *Nov 21 16:06:25.119: %ESWGE_ERR-3-SMI_ERR: SMI error, SMI_READ timeout in slot 1 register 0x1B40154 *Nov 21 16:06:25.199: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:25.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:25.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1e/themes/flick/images/ui-bg_flat_55_ffffff_40x100.png 13 178 Apr 11 2014 13:43:06 +05:00 ccpexp/external/development-bun Read fail at in slot 1dle/themes/flick/images/ui-bg_flat_75_ffffff_40x100.png 14 105 Apr 11 2014 13:43:06 +05:00 ccpexp/external/development-bundle/themes/flick/images/ui-bg_glass_65_ffffff_1x400.png 15 90 Apr 11 2014 13:43:06 +05:00 ccpexp/external/devel *Nov 21 16:06:25.387: EHWIC ESWGE I2C read error *Nov 21 16:06:25.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmdopment-bundle/themes/flick/images/ui-bg_highlight-soft_100_f6f6f6_1x100.png 16 118 Apr 11 2014 13:43:06 +05:00 ccpexp/external/development-bundle/themes/flick/images/ui-bg_highlight-soft_25_0073ea_1x100.png 17 136 Apr 11 2014 13:43:06 +05: *Nov 21 16:06:25.467: EHWIC ESWGE I2C read error 00 ccpexp/external/development-bundle/themes/flick/images/ui-bg_highlight-soft_50_dddddd_1x100.png 18 4369 Apr 11 2014 1:26.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 13:43:08 +05:00 ccpexp/external/development-bundle/themes/flick/images/ui-icons_0073ea_256x240.png 19 4369 Apr 11 2014 *Nov 21 16:06:26.147: EHWIC ESWGE I2C read error *Nov 21 16:06:25.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.011: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:0613:43:08 +05:00 ccpexp/external/development-bundle/themes/flick/images/ui-icons_454545_256x240.png 20 4369 Apr 11 2014 13:43:08 +05:00 ccpexp/external/development-bundle/themes/flick/images/ui-icons_666666_256x240.png 21 4369 Apr 11 2014 13:43:08 +05:00 ccpexp/external/development-bundle/themes/flick/imat in slot 1ages/ui-icons_ff0084_256x240.png 22 4369 Apr 11 2014 13:43:10 +05:00 ccpexp/external/development-bundle/themes/flick/ima *Nov 21 16:06:26.227: EHWIC ESWGE I2C read error ges/ui-icons_ffffff_256x240.png 23 26635 Apr 11 2014 13: *Nov 21 16:06:26.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.227: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 43:10 +05:00 ccpexp/external/development-bundle/themes/flick/jquery-ui-1.8.17.custom.css1 24 1066 Apr 11 2014 13:43:10 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.accordion.css 25 291 Apr 11 2014 13:43:10 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.all.css 26 262 Apr 11 2014 13:43:10 +05:00 ccpexp/external/development-.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1bundle/themes/flick/jquery.ui.base.css 27 2471 Apr 11 2014 13:43:12 +05:00 ccpexp/external/development-bundle/theme *No *Nov 21 16:06:26.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1v 21 16:06:26.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:26 *Nov 21 16:06:26.907: EHWIC ESWGE I2C read error *Nov 21 16:06:26.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:27.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1s/flick/jquery.ui.button.css 28 1317 Apr 11 2014 13:43:12 +05:00 ccpexp/external/development-bundle/themes/flick/jquery. *Nov 21 16:06:27.091: EHWIC ESWGE I2C read error ui.core.css 29 1358 Apr 11 2014 13:43:12 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.dialog.css 30 *Nov 21 16:06:27.227: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:27.307: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:27.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:27.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 375 Apr 11 2014 13:43:12 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.progressbar.css 31 1140 Apr 11 2014 13:43:12 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.slider.css 32 1383 Apr 11 2014 *Nov 21 16:06:27.771: EHWIC ESWGE I2C read error *Nov 21 16:06:27.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:27.851: EHWIC ESWGE I2C read error *Nov 21 16:06:27.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16: 13:43:14 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.tabs.css 33 17524 Apr 11 2014 13:43:14 +05:00 ccpexp/external/development-bundle/themes/flick/jquery.ui.theme.06:28.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1css 34 0 Apr 11 2014 13:43:00 +05:00 ccpexp/external/js 35 93868 Apr 11 2014 13:43:16 +05:00 ccpexp/external/js/jquery-1.7.1.min.js 36 288183 Apr 11 2014 13:43:14 +05:00 ccpexp/external/jQueryFramework.js 37 17769 Apr 11 2014 13:43:14 +05:00 ccpexp/external/jquery.i18n.properties-1.0.9.j *Nov 21 16:06:28.471: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.611: %ESWGE_ERR-3-CMDQ_FULL: Comms 38 21601 Apr 11 2014 13:43:16 +05:00 ccpexp/external/jqand queue is Full, I2C cmd Read fail at in slot 1uery.validate.min.js 39 929 Apr 11 2014 13:43:16 +05:00 ccpexp/external/readme.txt 40 0 Apr 11 2014 13:43:00 *Nov 21 16:06:28.611: EHWIC ESWGE I2C read error +05:00 ccpexp/html 41 0 Apr 11 2014 13:43:02 +05:00 ccpexp/html/bundles 42 10782 Apr 11 2014 13:43:16 +05:00 ccpexp/html/bundles/CCPExpNG_en.properties 43 11395 Apr 11 2014 13:43:18 +05:00 ccpexp/html/bundles/CCPExpNG_fr.properties 44 1871 Apr 11 2014 13:43:18 +05:00 ccpexp/html/bundl *Nov 21 16:06:28.631: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:28.691: EHWIC ESWGE I2C read error es/ValidationMessages_en.properties 45 1932 Apr 11 2014 13:43:18 +05:00 ccpexp/html/bundles/ValidationMessages_fr.proper *Nov 21 16:06:28.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:28.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.871: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:28.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.031: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1ties 46 0 Apr 11 2014 13:43:02 +05:00 ccpexp/html/images 47 3406 Apr 11 2014 13:43:22 +05:00 ccpexp/html/imagat in slot 1 *Nov 21 16:06:29.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.431: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1es/Activate.png 48 3419 Apr 11 2014 13:43:22 +05:00 ccpexp/html/images/Help_uishell_16.png 49 3040 Apr 11 2014 13:43:22 +05:00 ccpexp/html/images/NoSIM.png 50 3233 Apr 11 2014 13:43:24 +05:00 ccpexp/html/images/NoSignal.png 51 *Nov 21 16:06:29.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail 371 Apr 11 2014 13:43:24 +05:00 ccpexp/html/images/NotActivate.png 52 3219 Apr 11 2014 13:43:24 +05:00 ccpexp/html/images/SIM.png 53 3421 Apr 11 2014 13:43:24 +05:00 ccpex *Nov 21 16:06:29.451: EHWIC ESWGE I2C read error p/html/images/Sent-Mail.png 54 261 Apr 11 2014 13:43:24 +05:00 ccpexp/html/images/Signal1.png 55 294 Apr 11 201 *Nov 21 16:06:29.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 14 13:43:26 +05:00 ccpexp/html/images/Signal2.png 56 319 Apr 11 2014 13:43:26 +05:00 ccpexp/html/images/Signal3.png 57 *Nov 21 16:06:29.531: EHWIC ESWGE I2C read error 324 Apr 11 2014 13:43:26 +05:00 ccpexp/html/images/Signal4.png 58 324 Apr 11 2014 13:43:26 +05:00 ccpexp/html/images/Signal5.png 59 33259 Apr 11 2014 13:43:26 +05:00 ccpexp/html/images/allImagesby40.png 60 22196 Apr 11 2014 13:43:28 +05:00 ccpexp/html/images/allimagesby80.jpg 61 4816 Apr 11 2014 13:43:28 +05:00 ccpexp/html/images/banner.jpg 62 33012 Apr 11 2014 13:43:28 +05:00 ccpexp/html/images/bars.jpg 63 2816 Apr 11 2014 13:43:28 +05:00 ccpexp/html/images/blankSpace.png 64 83587 Apr 11 2014 13:43:30 +05: *Nov 21 16:06:29.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.899: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:29.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:30.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 100 ccpexp/html/images/caaDeviceList.png 65 1315 Apr 11 2014 13:43:30 +05:00 ccpexp/html/images/ccpeQR.png 66 1678 Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:30.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 16 Apr 11 2014 13:43:30 +05:00 ccpexp/html/images/ceserver.png 67 775 Apr 11 2014 13:43:30 +05:00 ccpexp/html/images/close.png 68 3406 Apr 11 2014 13:43:30 +05:00 ccpexp/html/images/disable.png 69 3073 Apr 11 2014 13:43:32 +05:00 ccpexp/html/images/down.png 70 3479 Apr 11 2014 13:43:32 +05:00 ccpexp/html/images/enable.png 71 1816 Apr 11 2014 *Nov 21 16:06:30.139: %ESWGE_ERR-3-CMDQ_FULL: Command queue is 13:43:32 +05:00 ccpexp/html/images/information.png 72 4213 Apr 11 2014 13:43:32 +05:00 ccpexp/html/images/logo.png 73 10130 Apr 11 2014 13:43:32 +05:00 ccpexp/html/images/paper *Nov 21 16:06:30.311: EHWIC ESWGE I2C read error grid.jpg 74 44291 Apr 11 2014 13:43:18 +05:00 ccpexp/html/ccpExpress.css1 75 4639 Apr 11 2014 13:43:18 +05:00 ccpat in slot 1exp/html/ccpExpress.html 76 4297 Apr 11 2014 13:43:20 +05:00 ccpexp/html/ceServer.html 77 8821 Apr 11 2014 13:43 *Nov 21 16:06:30.391: EHWIC ESWGE I2C read error :20 +05:00 ccpexp/html/configureDHCP.html 78 10196 Apr 1 *Nov 21 16:06:30.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:30.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 1 2014 13:43:20 +05:00 ccpexp/html/dhcpDns.html 79 4024 Apr 11 2014 13:43:20 +05:00 ccpexp/html/frames.html 80 1542 Apr 11 2014 13:43:22 +05:00 ccpexp/html/framesEndUser.html 81 20971 Apr 11 2014 13:43:22 +05:00 ccpexp/html/iAndC.html 82 703 Apr 11 2014 13:43:34 +05:00 ccpexp/html/jsNotEnabled.html 83 3670 Apr 11 2014 13:43:34 +05:00 ccpexp/html/navigationTemplate.html 84 3233 Apr 11 2014 13:43:34 :31.071: EHWIC ESWGE I2C read error +05:00 ccpexp/html/overview.html 85 4516 Apr 11 2014 1 *Nov 21 16:06:30.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:31.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:31.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:063:43:34 +05:00 ccpexp/html/phonehome.html 86 1878 Apr 11 2014 13:43:34 +05:00 ccpexp/html/pingAndTrace.html 87 8863 Apr 11 2014 13:43:36 +05:00 ccpexp/html/staticRouting.html 88 1322 Apr 11 2014 13:43:36 +05:00 ccpexp/html/transport *Nov 21 16:06:31.143: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:31.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1CLI.html 89 8130 Apr 11 2014 13:43:36 +05:00 ccpexp/html/user.html 90 1909 Apr 11 2014 13:43:36 +05:00 ccpexp/html/wireless.html 91 0 Apr 11 2014 13:43:02 +05:00 ccpe *Nov 21 16:06:31.887: EHWIC ESWGE I2C read error xp/js 92 0 Apr 11 2014 13:43:02 +05:00 ccpexp/js/l1 *Nov 21 16:06:31.207: EHWIC ESWGE I2C read error *Nov 21 16:06:31.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, PHY cmd Read fail at in slot 1 *Nov 21 16:06:31.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10n 93 0 Apr 11 2014 13:43:02 +05:00 ccpexp/js/unittest 94 87629 Apr 11 2014 13:43:36 +05:00 ccpexp/js/HWDictionary.xml 95 312913 Apr 11 2014 13:43:38 +05:00 ccpexp/js/ccpExpressFeatures.js 96 12962 Apr 11 2014 13:43:38 +05:00 ccpexp/js/ccpExpressValidation.js 97 20355 Apr 11 2014 1 *Nov 21 16:06:32.087: EHWIC ESWGE I2C read error 3:43:38 +05:00 ccpexp/js/deviceCommunicator.js 98 13219 Apr 11 2014 13:43:40 +05:00 ccpexp/js/frames.js 99 17619 Apr 11 2014 13:43:40 +05:00 ccpexp/js/jquery.blockUI.js 100 *Nov 21 16:06:32.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:33.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:33.035: EHWIC ESWGE I2C read error *Nov 21 16:06:33.243: EHWIC ESWGE I2C read error *Nov 21 1 11711 Apr 11 2014 13:43:40 +05:00 ccpexp/js/performChecks.js 101 0 Apr 11 2014 13:43:02 +05:00 ccpexp/odm 102 506 Apr 11 2014 13:43:40 +05:00 ccpexp/odm/overviewshCpuUtil.odm 103 630 Apr 11 2014 13:43:40 +05:00 ccpexp/odm/overview6:06:33.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:34.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1shFileSystem.odm 104 813 Apr 11 2014 13:43:42 +05:00 ccpexp/odm/overviewshProcMemory.odm 105 744 Apr 11 2014 13:43:42 +05:00 ccpexp/odm/overviewshVer.odm 106 614 Apr 11 2014 13:43:42 +05:00 ccpexp/odm/wirelessshCdpNeighborDetail. *Nov 21 16:06:34.187: EHWIC ESWGE I2C read error *Nov 21 16:06:34.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:34.827: EHWIC ESWGE I2C read error *Nov 21 16:06:35.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0odm 107 0 Apr 11 2014 13:43:02 +05:00 ccpexp/templates 108 85 Apr 11 2014 13:43:42 +05:00 ccpexp/templates/ATMDescription.txt 109 73 Apr 11 2014 13:43:42 +05:00 ccpexp/templates/ChatScript_EVDO.txt 110 72 Apr 11 2014 13:43:44 +05:00 ccpexp/templates/ChatScript_HSPA.txt 111 78 Apr 11 2014 13:43:44 +05:00 ccpexp/templates/ChatScript_HSPA7.txt 112 66 Apr 11 2014 13:43:44 +05:00 ccpexp/templates/ChatScript_LTE.txt 113 1466 Apr 11 2014 13:43:44 +05:06:35.507: EHWIC ESWGE I2C read error *Nov 21 16:06:35.935: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:35.935: EHWIC ESWGE I2C read error *Nov 21 16:06:36.615: EHWIC ESWGE I2C read error *Nov 21 16:06:37.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c0 ccpexp/templates/CreateBackUpCellular_DiPer_EVDO.txt 114 1437 Apr 11 2014 13:43:44 +05:00 ccpexp/templates/CreateBackUpCellular_DiPer_HSPA.txt 115 1471 Apr 11 2014 13:43:46 +05:00 ccpexp/templates/CreateBackUpCellular_DiPer_HSPA7.txt 116 1322 Apr 11 2014 13:43:46 +05:00 ccpexp/templates/CreateBackUpCellular_NonDiPer_EVDO.txt 117 1292 Apr 11 2014 13:43:46 +05:00 ccpexp/templates/CreateBackUpCellular_NonDiPer_HSPA.txt 118 1292 Apr 11 2014 13:43:46 +05:00 ccpexp/templates/md Read fail at in slot 1 *Nov 21 16:06:37.347: EHWIC ESWGE I2C read error *Nov 21 16:06:37.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:38.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmdr Read fail at in slot 1 *Nov 21 16:06:38.311: EHWIC ESWGE I2C read error *Nov 21 16:06:38.559: EHWIC ESWGE I2C read erroCreateBackUpCellular_NonDiPer_HSPA7.txt 119 698 Apr 11 2014 13:43:48 +05:00 ccpexp/templates/CreatePrimaryCellular_DiPer_EVDO.txt 120 669 Apr 11 2014 13:43:48 +05:00 ccpexp/templates/CreatePrimaryCellular_DiPer_HSPA.txt 121 706 Apr 11 2014 13:43:48 +05:00 ccpexp/templates/CreatePrimaryCellular_DiPer_HSPA7.txt 122 560 Apr 11 2014 13:43:48 +05:00 ccpexp/templates/CreatePrimaryCellular_NonDiPer_EVDO.txt 123 525 Apr 11 2014 13:43:48 +05:00 ccpexp/templates/CreatePrimaryC *Nov 21 16:06:38.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:39.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:39.511: EHWIC ESWGE I2C read error *Nov 21 16:06:39.715: EHWIC ESWGE I2C read error *Nov 21 16:ellular_NonDiPer_HSPA.txt 124 525 Apr 11 2014 13:43:50 +05:00 ccpexp/templates/CreatePrimaryCellular_NonDiPer_HSPA7.txt 125 28 Apr 11 2014 13:43:50 +05:00 ccpexp/templates/DefaultInterface.txt 126 110 Apr 11 2014 13:43:50 +05:00 ccpexp/templates/EncapsulationPPP.txt 127 65 Apr 11 2014 13:06:40.783: EHWIC ESWGE I2C read error 43:50 +05:00 ccpexp/templates/MMDsl.txt 128 19 Apr 11 2014 13:43:50 +05:00 ccpexp/templates/NofilePrivilege.txt 129 1638 Apr 11 2014 13:43:52 +05:00 ccpexp/templates/Scanne *Nov 21 16:06:41.279: EHWIC ESWGE I2C read error *Nov 21 16:06:41.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:41.963: EHWIC ESWGE I2C read error *Nov 21 16:06:42.147: EHWIC ESWGE I2C read error *Nov 21 16:06:42.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is rPayloadTemplate.txt 130 45 Apr 11 2014 13:43:52 +05:00 ccpexp/templates/addDNS.txt 131 66 Apr 11 2014 13:43:52 +05:00 ccpexp/templates/addNewDHCP.txt 132 74 Apr 11 2014 13:43:52 +05:00 ccpexp/templates/addNewDHCP_DNS.txt 133 Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:43.443: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 94 Apr 11 2014 13:43:52 +05:00 ccpexp/templates/associateVlan.txt 134 10 Apr 11 2014 13:43:54 +05:00 ccpexp/templates/cdpRun.txt 135 148 Apr 11 2014 13:43:54 +05:00 ccpexp/templates/chap.txt 136 364 Apr 11 2014 13:43:54 +05: *Nov 21 16:06:43.443: EHWIC ESWGE I2C read error *Nov 21 16:06:43.523: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:43.523: EHWIC ESWGE I2C read error *Nov 21 16:06:44.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 100 ccpexp/templates/cnsFormCreate.txt 137 461 Apr 11 2014 13:43:54 +05:00 ccpexp/templates/cnsFormCreateWithIp.txt 138 255 Apr 11 2014 13:43:54 +05:00 ccpexp/templates/cnsFormCr6:06:44.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1eateWithoutIp.txt 139 478 Apr 11 2014 13:43:56 +05:00 ccpexp/templates/cnsFormDelete.txt 140 361 Apr 11 2014 13:43:56 +05:00 ccpexp/templates/cnsFormImage.txt 141 590 Apr 11 2014 13:43:56 +05:00 ccpexp/templates/cnsFormImageDelete.txt 142 478 Apr 11 2014 13:43:56 +05:00 ccpexp/template *Nov 21 16:06:44.999: EHWIC ESWGE I2C read error *Nov 21 16:06:45.207: EHWIC ESWGE I2C read error *Nov 21 16:06:45.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:45.887: EHWIC ESWGE I2C read error s/cnsFormIpDelete.txt 143 412 Apr 11 2014 13:43:56 +05:00 ccpexp/templates/cnsFormWithoutIpDelete.txt 144 113 Apr 11 2014 13:43:58 +05:00 ccpexp/templates/createATMInterface.txt *Nov 21 16:06:46.715: EHWIC ESWGE I2C read error 145 148 Apr 11 2014 13:43:58 +05:00 ccpexp/templates/createATMInterfacePppoe.txt 146 135 Apr 11 2014 13:43:58 +05:00 ccpexp/templates/createATMInterfaceWithDHCP.txt 147 158 Apr 11 2014 13:43:58 +05:00 ccpexp/templates/createATMInterfaceWithDHCPHostname.txt 148 137 Apr 11 2014 13:44:00 *Nov 21 16:06:47.227: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:48.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:48.019: EHWIC ESWGE I2C read error *Nov 21 16:06:48.399: EHWIC ESWGE I2C read error *Nov 21 16: +05:00 ccpexp/templates/createATMInterfaceWithIpv6Autoconfig.txt 149 102 Apr 11 2014 13:44:00 +05:00 ccpexp/templates/createATMInterfaceWithIpv6DhcpClient.txt 150 203 Apr 11 2014 13:44:00 +05:00 ccpexp/templates/createATMInterfaceWithIpv6PrefixFPro.txt 151 165 Apr 11 2014 13:44:00 +05:00 ccpexp/templates/createATMInterfaceWithIpv6StaticIP.txt 152 137 Apr 11 2014 13:44:02 +05:00 ccpexp/templates/createATMInterfaceWithStaticIP.txt 153 336 Apr 11 2014 13:44:02 +05:00 c06:48.603: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:49.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:49.963: EHWIC ESWGE I2C read error *Nov 21 16:EHWIC ESWGE I2C read error 06:50.271: EHWIC ESWGE I2C read error *Nov 21 16:06:51.063: cpexp/templates/createDialer.txt 154 80 Apr 11 2014 13:44:02 +05:00 ccpexp/templates/createInterface.txt 155 137 Apr 11 2014 13:44:02 +05:00 ccpexp/templates/createLoopback.txt 156 198 Apr 11 2014 13:44:02 +05:00 ccpexp/templates/createNat.txt 157 131 Apr 11 2014 13:44:04 +05:00 ccpexp/templates/createVLAN.txt 158 537 Apr 11 2014 13:44:04 +05:00 ccpexp/templates/deleteBackupInterfaceConfigs.txt 159 25 Apr 11 2014 13:44:04 +05:00 ccpexp/templates/deleteDNS.t *Nov 21 16:06:51.223: EHWIC ESWGE I2C read error *Nov 21 16:06:51.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:52.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:52.107: EHWIC ESWGE I2C read error *Nov 21 16:06xt 160 49 Apr 11 2014 13:44:04 +05:00 ccpexp/templates/deleteDialerList.txt 161 100 Apr 11 2014 13:44:06 +05:00 ccpexp/templates/deleteInterface.txt 162 163 Apr 11 2014 13:44:06 +05:00 ccpexp/templates/deleteNat.txt 163 159 Apr 11 2014 13:44:06 +05:00 ccpexp/templates/deletePrimaryIfRoutesAndAcl.txt 164 164 Apr 11 2014 13:44:06 +05:00 ccpexp/templates/deletePrimaryRoutes.txt 165 60 Apr 11 2014 13:44:06 +05:00 ccpexp/templates/deleteScriptFromLine.txt 166 :52.279: EHWIC ESWGE I2C read error *Nov 21 16:06:53.243: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:53.243: EHWIC ESWGE I2C read error *Nov 21 16:06:53.323: EHWIC ESWGE I2C read error *Nov 21 16:06:53.523: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:54.315: %ESWGE_ERR-3-CMD 85 Apr 11 2014 13:44:08 +05:00 ccpexp/templates/deleteVlan.txt 167 44 Apr 11 2014 13:44:08 +05:00 ccpexp/templatQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1es/dest-net-ipv6Interface.txt 168 47 Apr 11 2014 13:44:08 +05:00 ccpexp/templates/dest-net-ipv6InterfaceDelete.txt 169 *Nov 21 16:06:54.315: EHWIC ESWGE I2C read error 44 Apr 11 2014 13:44:08 +05:00 ccpexp/templates/dest-net-ipv6Ip.txt 170 37 Apr 11 2014 13:44:10 +05:00 ccpexp/templates/dest-net-ipv6IpDelete.txt 171 33 Apr 11 2014 13:44:10 +05:00 ccpexp/templates/dest-netInterfaceCreate.txt 1 *Nov 21 16:06:54.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:54.395: EHWIC ESWGE I2C read error *Nov 21 16:06:55.075: EHWIC ESWGE I2C read error *Nov 21 16:06:55.419: %ESWGE_ERR-3-CMDQ_FULL: Com72 36 Apr 11 2014 13:44:10 +05:00 ccpexp/templates/dest-netInterfaceDelete.txt 173 29 Apr 11 2014 13:44:10 +05:00 ccpexp/templates/dest-netIpCreate.txt 174 29 Apr 11 2014 13:44:12 +05:00 ccpexp/templates/dest-netIpDelete.txt 175 mand queue is Full, I2C cmd Read fail at in slot 1 27 Apr 11 2014 13:44:12 +05:00 ccpexp/templates/dest-netIpDhcpCreate.txt 176 30 Apr 11 2014 13:44:12 +05:00 ccpexp/templates/dest-netIpDhcpDelete.txt 177 93 Apr 11 2014 13:44:12 +05:00 ccpexp/templates/deteteATMInterface.txt 178 *Nov 21 16:06:55.419: EHWIC ESWGE I2C read error *Nov 21 16:06:55.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:06:56.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:56.179: EHWIC ESWGE I2C read error *Nov 21 16 134 Apr 11 2014 13:44:12 +05:00 ccpexp/templates/deteteDialer.txt 179 119 Apr 11 2014 13:44:14 +05:00 ccpexp/templates/dialerDHCP.txt 180 130 Apr 11 2014 13:44:14 +05:0:06:56.259: EHWIC ESWGE I2C read error 0 ccpexp/templates/dialerDHCPHostname.txt 181 103 Apr 11 2014 13:44:14 +05:00 ccpexp/templates/dialerIPNego.txt 182 117 Apr 11 2014 13:44:14 +05:00 ccpexp/templates/dialerIpv6Autoconfig.txt 183 82 Apr 11 2014 13:44:16 +05:00 ccpexp/templates/dialerIpv6DhcpClient.txt 184 156 Apr 11 2014 *Nov 21 16:06:56.939: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:56.939: EHWIC ESWGE I2C read error *Nov 21 16:06:57.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:57.019: EHWIC ESWGE I2C read error *Nov 21 16 13:44:16 +05:00 ccpexp/templates/dialerIpv6PrefixFromProvider.txt 185 135 Apr 11 2014 13:44:16 +05:00 ccpexp/templates/dialerIpv6StaticIP.txt 186 109 Apr 11 2014 13:44:16 +05:00 ccpexp/templates/dialerStaticIP.txt 187 72 Apr 11 2014 13:44:16 +05:00 ccpexp/templates/disableNativeVlanOnInterface.txt 188 59 Apr 11 2014 13:44:18 +05:00 ccpexp/templates/disableTrunkOnInterface.txt 189 75 Apr 11 2014 13:44:18 +05:00 ccpexp/templates/disassociateVlan.txt 190 23:06:57.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:57.699: EHWIC ESWGE I2C read error *Nov 21 16:06:57.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:57.779: EHWIC ESWGE I2C read error *Nov 21 16:06:57.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fa Apr 11 2014 13:44:18 +05:00 ccpexp/templates/enableIpv6UnicastRouting.txt 191 84 Apr 11 2014 13:44:18 +05:00 ccpexp/templates/enableNativeVlanOnInterface.txt 192 68 Apr 11 2014 13:44:20 +05:00 ccpexp/templates/enableTrunkOnInterface.txt 193 19 Apr 11 2014 13:44:20 +05:00 ccpexp/templates/filePrivilege.txt 194 69 Apr 11 2014 13:44:20 +05:00 ccpexp/templates/hostnameDomainname.txt 195 39 Apr 11 2014 13:44:20 +05:00 ccpexp/templates/import.txt 196 63 Apr il at in slot 1 *Nov 21 16:06:58.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:58.595: EHWIC ESWGE I2C read error *Nov 21 16:06:58.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:58.675: EHWIC ESWGE I2C read error *Nov 21 16:06:59.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue i11 2014 13:44:20 +05:00 ccpexp/templates/interfaceDescription.txt 197 61 Apr 11 2014 13:44:22 +05:00 ccpexp/templates/interfaceMediaType.txt 198 51 Apr 11 2014 13:44:22 +05:00 ccpexp/templates/interfaceNoShut.txt 199 114 Apr 11 20s Full, I2C cmd Read fail at in slot 114 13:44:22 +05:00 ccpexp/templates/interfacePppoe.txt 200 45 Apr 11 2014 13:44:22 +05:00 ccpexp/templates/interfaceShut.txt 201 86 Apr 11 2014 13:44:24 +05:00 ccpexp/templates/interfaceWithDHCP.txt 202 109 Apr 11 2014 13:44:24 + *Nov 21 16:06:59.427: EHWIC ESWGE I2C read error *Nov 21 16:06:59.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:06:59.507: EHWIC ESWGE I2C read error *Nov 21 16:06:59.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 105:00 ccpexp/templates/interfaceWithDHCPHostname.txt 203 92 Apr 11 2014 13:44:24 +05:00 ccpexp/templates/interfaceWithIPNego.txt 204 114 Apr 11 2014 13:44:24 +05:00 ccpexp/tem6:07:00.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1plates/interfaceWithIpv6Autoconfig.txt 205 123 Apr 11 2014 13:44:24 +05:00 ccpexp/templates/interfaceWithIpv6DhcpClient.txt 206 153 Apr 11 2014 13:44:26 +05:00 ccpexp/templates/interfaceWithIpv6PrefixFromProvider.txt 207 132 Apr 11 2014 13:44:26 +05:00 ccpexp/templates/interfaceWithIpv6StaticIP *Nov 21 16:07:00.467: EHWIC ESWGE I2C read error *Nov 21 16:07:00.547: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:00.547: EHWIC ESWGE I2C read error *Nov 21 16:07:01.227: EHWIC ESWGE I2C read error.txt 208 88 Apr 11 2014 13:44:26 +05:00 ccpexp/templates/interfaceWithStaticIP.txt 209 29 Apr 11 2014 13:44:26 +05:00 ccpexp/templates/ipv4DHCPDelete.txt 210 42 Apr 11 2014 13:44:28 +05:00 ccpexp/templates/ipv4DHCPDelete_DNS.txt 211 132 Apr 11 2014 13:44:28 +05:00 ccpexp/templates/loopbackIpv6StaticIP.txt 212 90 Apr 11 2014 13:44:28 +05:00 ccpexp/templates/loopbackStaticIP.txt 213 106537 Apr 11 2014 13:44:28 +05:00 ccpexp/templates/masking_rule.xml 214 *Nov 21 16:07:01.451: EHWIC ESWGE I2C read error *Nov 21 16:07:02.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:02.131: EHWIC ESWGE I2C read error *Nov 21 16:07:02.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:02.211: EHWIC ESWGE I2C read error *Nov 21 16:07:02.391: 48 Apr 11 2014 13:44:30 +05:00 ccpexp/templates/natInside.txt 215 13 Apr 11 2014 13:44:30 +05:00 ccpexp/templates/noCdpRun.txt 216 50 Apr 11 2014 13:44:30 +05:00 ccpexp/templates/noDslGroup0.txt 217 11 Apr 11 2014 13:44:30 +05:00 ccpexp/templates/noIpSla.txt 218 51 Apr 11 2014 13:44:30 +05:00 ccpexp/templates/noNatInside.txt 219 42 Apr 11 2014 13:44:32 +05:00 ccpexp/templates/noimport.txt 220 139 Apr 11 2014 13:44:32 +05:00 ccpexp/templates/pap.txt %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:03.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:il at in slot 107:03.071: EHWIC ESWGE I2C read error *Nov 21 16:07:03.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fa221 222 Apr 11 2014 13:44:32 +05:00 ccpexp/templates/papchap.txt 222 276 Apr 11 2014 13:44:32 +05:00 ccpexp/templates/parserCLIAaaCommands.txt 223 305 Apr 11 2014 13:44:34 +05:00 ccpexp/templates/parserCLICellularCommands.txt 224 201 Apr 11 2014 13:44:34 +05:00 ccpexp/templates/parserCLIDeleteAaaCommand.txt 225 29 Apr 11 2014 13:44:34 +05:00 ccpexp/templates/parserCLIDeleteView.txt 226 55 Apr 11 2014 13:44:34 +05:00 ccpexp/templates/parserCLIInterface.txt 2 *Nov 21 16:07:03.151: EHWIC ESWGE I2C read error *Nov 21 16:07:03.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:03.831: EHWIC ESWGE I2C read error *Nov 21 16:07:03.911: EHWIC ESWGE I2C read error *Nov 21 16:07:04.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:04.715: %E27 667 Apr 11 2014 13:44:36 +05:00 ccpexp/templates/parserCLIView.txt 228 242 Apr 11 2014 13:44:36 +05:00 ccpexp/templates/parserCLIWlanCommand.txt 229 26 Apr 11 2014 13:44:36 +05:00 ccpexp/templates/parserUserDeleteCmd.txt 230 96 Apr 11 2014 13:44:36 +05:00 ccpexp/templates/removeAccessList23.txt 231 1160 Apr 11 2014 13:44:36 +05:00 ccpexp/templates/sampleSwitchConfiguration.txt 232 102 Apr 11 2014 13:44:38 +05:00 ccpexp/templates/setDefaultRoute.txt 233 SWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:04.715: EHWIC ESWGE I2C read error *Nov 21 16:07:04.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:04.795: EHWIC ESWGE I2C read error *Nov 21 16:07:05.475: %ESWGE_ERR-3-CMD 59 Apr 11 2014 13:44:38 +05:00 ccpexp/templates/setMTUSize.txt 234 52 Apr 11 2014 13:44:38 +05:00 ccpexp/templates/shdslATM.txt 235 50 Apr 11 2014 13:44:38 +05:00 ccpexp/templates/shdslAUTO.txt 236 64 Apr 11 2014 13:44:40 +Q_FULL: Command queue is Full, I2C cmd Read fail at in slot 105:00 ccpexp/templates/shdslEFM.txt 237 50 Apr 11 2014 13:44:40 +05:00 ccpexp/templates/shdslEFMATM.txt 238 93 Apr 11 2014 13:44:40 +05:00 ccpexp/templates/shdslMMEFMATM.txt 239 21 Apr 11 2014 13:44:40 +05:00 ccpexp/templates/us *Nov 21 16:07:05.475: EHWIC ESWGE I2C read error *Nov 21 16:07:05.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:05.555: EHWIC ESWGE I2C read error *Nov 21 16:07:06.311: EHWIC ESWGE I2C read error *Nov 21 16:07:06.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue erFormDelete.txt 240 61 Apr 11 2014 13:44:40 +05:00 ccpexp/templates/userPasswordCreate.txt 241 59 Apr 11 2014 13:44:42 +05:00 ccpexp/templates/userSecretCreate.txt 242 20 Apr 11 2014 13:44:42 +05:00 ccpexp/templates/wanMode.txt 243 88897 Apr 11 2014 13:43:04 +05:00 ccpexp/CCPE_2.8_Open_Source_Documentation.html 244 73 Apr 11 2014 13:44:42 +05:00 ccpexp/version.txt 245 2464 Apr 11 2014 13:44:42 +05:00 home.shtml 246 4639974 Nov 18 2014 15:03:32 +05:00 apis Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:06.519: EHWIC ESWGE I2C read error *Nov 21 16:07:06.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:07.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:07.279: EHWIC ESWGE I2C read error ps42.9-2-1TH1-13.sbn 247 45308 Nov 18 2014 15:02:32 +05:00 BOOT69xx.0-0-0-14.zz.sgn 248 224952 Nov 18 2014 15:02:32 +05:00 DSP69xx.0-0-0-8.zz.sgn 249 481 Nov 18 2014 15:02:34 +05:00 SCCP69xx.9-2-1-0.loads 250 2725992 Nov 18 2014 15:02:38 +05:00 SCCP69xx.9-2-1-0.zz.sgn 251 575495 Nov 18 2014 15:03:34 +05:00 cnu42.9-2-1TH1-13.sbn 252 2208583 Nov 18 2014 15:03:36 +05:00 cvm42sccp.9-2-1TH1-13.sbn 253 356907 Nov 18 2014 15:03:38 +05:00 dsp42.9-2-1TH1-13.sbn 254 1759967 N *Nov 21 16:07:07.455: EHWIC ESWGE I2C read error *Nov 21 16:07:08.135: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:08.135: EHWIC ESWGE I2C read error *Nov 21 16:07:08.215: EHWIC ESWGE I2C read error *Nov 21 16:07:08.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:09.071: %Eov 18 2014 15:03:42 +05:00 jar42sccp.9-2-1TH1-13.sbn 255 676 Nov 18 2014 15:03:42 +05:00 SCCP42.9-2-1S.loads 256 680 Nov 18 2014 15:03:42 +05:00 term42.default.loads 257 680 Nov 18 2014 15:03:42 +05:00 term62.default.loads 144334848 bytes available (112148480 bytes used) ******** ATA Flash Card Geometry/Format Info ******** ATA CARD GEOMETRY Manufacturer Name Model Number SMART CF Serial Number STP18070M3D Firmware RevisiSWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:09.071: EHWIC ESWGE I2C read error *Nov 21 16:07:09.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:09.151: EHWIC ESWGE I2C read error *Nov 21 16:07:09.831: %ESWGE_ERR-3-Con 20101222 Number of Heads 16 Number of Cylinders 980 Sectors per Cylinder 32 Sector Size 512 Total Sectors 501760 ATA PARTITION 1 INFO Start Sector 32 Number ofMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Sectors 501728 Size in Bytes 256884736 File System Type FAT16 Number of FAT Sectors 245 Sectors Per Cluster 8 Number of Clusters 62618 Number of Data Sectors 500944 Base FAT Sector *Nov 21 16:07:09.831: EHWIC ESWGE I2C read error *Nov 21 16:07:09.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:09.911: EHWIC ESWGE I2C read error *Nov 21 16:07:10.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07 257 Base Root Sector 747 Base Data Sector 779 ATA MONLIB INFO Image Monlib size 127472 Disk Monlib Size 127472 Disk Space Available 13:10.591: EHWIC ESWGE I2C read error 1072 Name piptom-atafslib-m Start sector 2 End sector 250 Updated By C2900-UNIVERSALK9-M15.4(1)T1 Version 2 ------------------ dir nvram: ------------------ Directory of nvram:/ 240 -rw- 14837 *Nov 21 16:07:10.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:10.671: EHWIC ESWGE I2C read error *Nov 21 16:07:10.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:11.503: %ESWGE_ERR-3-CMDQ_FULL: Command queue is startup-config 241 ---- 24 private-config 242 -rw- 14837 underlying-config 1 -rw- 2945 cwmp_inventory Full, I2C cmd Read fail at in slot 1 4 ---- 297 persistent-data 5 -rw- 17 ecfm_ieee_mib 6 -rw- 559 IOS-Self-Sig#1.cer 7 -rw- 0 ifIndex-table 262136 bytes total (240055 bytes free) ------------------ show data-corruption ----------------- *Nov 21 16:07:11.503: EHWIC ESWGE I2C read error *Nov 21 16:07:11.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:11.611: EHWIC ESWGE I2C read error - No data inconsistency errors have been recorded. ------------------ show memory statistics ------------------ Head Total(b) Used(b) Free(b) Lowest(b) Largest(b) Processor 3C784460 273165108 94069388 179095720 57969488 145734676 I/O C800000 58720256 18153668 40566588 40517152 40515580 ------------------ show process memory ------------------ Processor Pool Total: 273165108 Used: 94068816 Free: 179096292 *Nov 21 16:07:12.291: EHWIC ESWGE I2C read error *Nov 21 16:07:12.487: EHWIC ESWGE I2C read error I/O Pool Total: 58720256 Used: 18153584 Free: 40566672 PID TTY Allocated Freed Holding Getbufs Retbufs *Nov 21 16:07:12.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:13.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Process 0 0 271592644 181331432 81791556 1065 2089 *Init* 0 0 12708 981040 12708 0 0 *Sched* 0 0 14762800 13573064 4859484 47 47 *Dead* 0 0 0 0 394968 0 0 *MallocLite* 1 0 977744 0 985008 *Nov 21 16:07:13.247: EHWIC ESWGE I2C read error *Nov 21 16:07:13.327: EHWIC ESWGE I2C read error *Nov 21 16:07:14.007: 0 0 Chunk Manager 2 0 240 240 4264 0 0 Load Meter 3 0 29700 772 54828 0 0 LICENSE AGENT 4 0 65588 720 90852 0 0 EDDRI_MAIN 5 0 0 0 7264 0 0 RO Notify Timers 6 0 3340 240 10364 0 0 Check heaps 7 0 602964 602964 74260 49 0 %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:14.007: EHWIC ESWGE I2C read error *Nov 21 16:07:14.087: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:14.087: EHWIC ESWGE I2C read error *Nov 21 16:07:14.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slotPool Manager 8 0 0 0 7264 0 0 DiscardQ Backgro 9 0 240 240 7264 0 0 Timers 10 0 0 0 4264 0 0 WATCH_AFS 11 0 0 0 7264 0 0 License Client N 12 0 0 0 7264 0 0 Image License br 13 0 93685540 93686316 7280 0 0 Licensing Auto U 1 *Nov 21 16:07:14.767: EHWIC ESWGE I2C read error *Nov 21 16:07:14.847: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:14.847: EHWIC ESWGE I2C cmd Read fail at in slot 1read error *Nov 21 16:07:14.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:15.679: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C 14 0 240 240 7264 0 0 Environmental mo 15 0 0 0 7264 0 0 IPC Event Notifi 16 0 0 0 7264 0 0 IPC Dynamic Cach 17 0 0 0 7264 0 0 IPC Session Serv 18 0 0 0 7264 0 0 IPC Zone Manager 19 0 0 0 7264 0 0 IPC Periodic Tim 20 0 0 *Nov 21 16:07:15.679: EHWIC ESWGE I2C read error *Nov 21 16:07:15.759: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:15.759: EHWIC ESWGE I2C read error *Nov 21 16:07:16.439: EHWIC ESWGE I2C read error *Nov 21 16:07:16.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue i 0 7264 0 0 IPC Deferred Por 21 0 0 0 7264 0 0 IPC Process leve 22 0 2104 0 9368 0 0 IPC Seat Manager 23 0 0 0 7264 0 0 IPC Check Queue 24 0 s Full, I2C cmd Read fail at in slot 1 0 0 7264 0 0 IPC Seat RX Cont 25 0 0 0 7264 0 0 IPC Seat TX Cont 26 0 0 0 72 *Nov 21 16:07:16.519: EHWIC ESWGE I2C read error *Nov 21 16:07:16.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:17.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:17.279: EHWIC ESWGE I2C read error *Nov 21 164 0 0 IPC Keep Alive M 27 0 0 0 7264 0 0 IPC Loadometer 28 0 0 0 25264 0 0 Crash writer 29 0 380 0 7644 6:07:17.491: EHWIC ESWGE I2C read error 0 0 Exception contro 30 0 147656 103172 83116 834 834 Skinny Msg Serve 31 0 0 0 7264 0 0 IFS Agent Manage 32 0 18848 2044 24068 39 *Nov 21 16:07:18.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:18.171: EHWIC ESWGE I2C read error *Nov 21 16:07:18.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:18.251: EHWIC ESWGE I2C read error *Nov 21 16:0 39 ARP Input 33 0 13008 8100 12172 9 9 ARP Background 34 0 240 240 7264 0 0 ATM Idle Timer 35 0 0 0 7264 0 0 ATM ASYNC PROC 36 0 0 0 7264 0 0 CEF MIB API 37 0 0 0 7264 0 0 AAA_SERVER_DEADT 38 0 0 0 13264 0 0 Policy Manage7:18.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:18.931: EHWIC ESWGE I2C read error *Nov 21 16:07:19.011: EHWIC ESWGE I2C read error *Nov 21 16:07:19.135: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:19.815: %ESWt in slot 1GE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail ar 39 0 240 240 7264 0 0 DDR Timers 40 0 29260 352 36444 71 71 Entity MIB API 41 0 240 240 7264 0 0 PrstVbl 42 0 240 240 7264 0 0 Serial Backgroun 43 0 0 0 4264 0 0 RMI RM Notify Wa 44 0 0 0 13264 0 0 License IPC stat 45 0 *Nov 21 16:07:19.815: EHWIC ESWGE I2C read error *Nov 21 16:07:19.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:19.895: EHWIC ESWGE I2C read error *Nov 21 16:07:20.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:20.575: EHWIC ESWGE I2C read error *Nov 21 16:07:20.655: % 0 0 13264 0 0 License IPC serv 46 0 8460 8536 7264 2 2 SMART 47 0 272704 1664 278096 0 0 RF SCTPthread 48 0 1688 0 8952 0 0 CHKPT RG SCTPthr 49 0 0 0 7264 39 39 ARP Snoop 50 0 240 240 7264 0 0 GraphIt 51 0 240 240 ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at i in slot 1n slot 1 *Nov 21 16:07:20.655: EHWIC ESWGE I2C read error *Nov 21 16:07:20.735: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:21.487: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at 13264 0 0 Dialer event 52 0 0 0 7264 0 0 SERIAL A'detect 53 0 240 240 13264 0 0 XML Proxy Client 54 0 0 4096 7264 0 0 crypto sw pk pro 55 0 240 240 7264 0 0 ISM-VPN backgrou 56 0 0 0 7264 0 0 ISM-VPN Cleanup 57 0 0 0 7264 0 *Nov 21 16:07:21.487: EHWIC ESWGE I2C read error *Nov 21 16:07:21.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:21.567: EHWIC ESWGE I2C read error *Nov 21 16:07:22.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:22.247: EHWIC ESWGE I2C read error *Nov 21 16:07:22.407: 0 Critical Bkgnd 58 0 211556 1840 123556 156 156 Net Background EHWIC ESWGE I2C read error4004 13264 0 0 IDB Work 60 0 240 240 13264 2387 2337 Logger 61 0 51500 240 7772 0 0 TTY Background 62 0 0 0 7128 0 0 CRYPTO IKMP IPC 63 0 1044 0 14308 0 0 CTS COR *Nov 21 16:07:23.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:23.287: EHWIC ESWGE I2C read error *Nov 21 16:07:23.479: EHWIC ESWGE I2C read error *Nov 21 16:07:23.559: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16E 64 0 1044 760 14068 0 0 SXP CORE 65 0 23372 16164 :07:24.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 22884 0 0 RF Slave Main Th 66 0 136740 0 144004 0 0 IF-MGR control p 67 0 0 0 7264 0 0 IF-MGR event pro 68 0 0 0 4264 0 0 Inode Table Dest 69 0 0 0 7264 0 0 cpf_msg_holdq_pr 70 0 *Nov 21 16:07:24.271: EHWIC ESWGE I2C read error *Nov 21 16:07:24.379: EHWIC ESWGE I2C read error *Nov 21 16:07:25.059: EHWIC ESWGE I2C read error *Nov 21 16:07:25.199: EHWIC ESWGE I2C read error *Nov 21 16:07:25.583: %ESWGE_ERR-3-CMDQ_FULL: 0 0 7264 0 0 cpf_msg_rcvq_pro 71 0 0 0 7264 0 0 cpf_process_tpQ 72 0 0 0 7264 0 0 CHKPT Test clien 73 0 0 0 7264 0 0 CHKPT Test clien 74 0 0 0 7264 0 0 CHKPT Test clien 75 0 0 0 7264 0 0 CHKPT Test clien 76 0 0 Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:26.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:26.263: EHWIC ESWGE I2C read error *Nov 21 16:07:26.343: EHWIC ESWGE I2C read error *Nov 21 16:07:27.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:27.02 0 7264 0 0 CHKPT Test clien 77 0 0 0 7264 0 0 CHKPT Test clien 78 0 0 0 7264 0 0 CHKPT Test clien 79 0 0 0 7264 0 0 CHKPT Test clien 80 0 0 0 7264 0 0 CHKPT Test clien 81 0 0 0 7264 0 0 CHKPT Test clien 82 0 0 0 7264 3: EHWIC ESWGE I2C read error *Nov 21 16:07:27.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:27.103: EHWIC ESWGE I2C read error *Nov 21 16:07:27.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:27.783: EHWIC ESWG 0 0 CHKPT Test clien 83 0 0 0 13264 0 0 Crypto PKI-HA 84 0 0 0 7264 0 0 IKE HA Mgr 85 0 0 0 7264 0 0 IPSEC HA Mgr 86 0 240 240 7264 0 0 TDM Management 87 0 18044 10516 11028 0 0 RF Master Main T 88 0 1688 0 8952 0 0 RE I2C read error *Nov 21 16:07:27.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:27.863: EHWIC ESWGE I2C read error *Nov 21 16:07:28.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:28.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21F Master Status 89 0 0 0 7264 79 79 Net Input 90 0 240 24 16:07:28.715: EHWIC ESWGE I2C read error 0 7264 0 0 Compute load avg 91 0 3208 3208 7264 0 0 Per-minute *Nov 21 16:07:28.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1Jobs 92 0 140 0 10404 0 0 Per-Second Jobs 93 0 0 0 7264 0 0 AggMgr Process 94 0 0 0 7264 0 0 Token Daemon *Nov 21 16:07:28.795: EHWIC ESWGE I2C read error *Nov 21 16:07:29.475: EHWIC ESWGE I2C read error *Nov 21 16:07:29.615: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:29.615: EHWIC ESWGE I2C read error *Nov 21 16:07:29.695: %ESWGE_ERR-3-CMDQ_FULL: Command queue 95 0 0 0 7264 0 0 Transport Port A 96 0 0 0 7264 0 0 HC Counter Timer 97 0 10292 240 17316 877 877 SM Monitor 98 0 240 240 7264 0 0 Bryce I2C CMD Qu 99 0 240 240 13264 0 0 SM Installer 100 0 0 0 4264 0 0 dev_device_inser 101 0 0 is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:30.375: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:30.375: EHWIC ESWGE I2C read error *Nov 21 16:07:30.543: EHWIC ESWGE I2C read error *Nov 21 16:07:31.223: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 4264 0 0 dev_device_remov 102 0 0 0 13264 0 0 sal_dpc_process 103 0 0 0 7264 0 0 ARL Table Manage 104 0 240 240 7264 0 0 ESWPPM 105 0 240 240 7264 0 0 Eswilp Storm Con 106 0 240 240 7264 0 0 ESWILPPM 107 0 240 240 426 *Nov 21 16:07:31.223: EHWIC ESWGE I2C read error *Nov 21 16:07:31.303: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:31.303: EHWIC ESWGE I2C read error *Nov 21 16:07:31.983: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:04 0 0 Eswilp Storm Con 108 0 256136 27556 16544 9 9 DXMRVL 109 0 0 0 7264 0 0 esw_mrvl mat que 110 0 240 240 7264 0 0 ehwic_eswge Proc 111 0 0 0 7264 0 0 RF_INTERDEV_DELA 112 0 0 0 25264 0 0 RF_INTERDEV_SCTP 113 0 11644 5020 16888 0 7:31.983: EHWIC ESWGE I2C read error *Nov 21 16:07:32.063: EHWIC ESWGE I2C read error *Nov 21 16:07:32.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:33.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:33.003: EHWIC ESWGE I2C read error *Nov 21 16:07:33.083: %ESWGE_ERR-3- 0 EEM ED Identity 114 0 48588 121572 53448 0 0 EEM ED ND 115 0 0 0 7264 0 0 VIDEO DSPRM MAIN 116 0 160460 240 167484 0 0 VNM DSPRM MAIN 117 0 7852 240 7264 2 CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 2 FLEX DNLD MAIN 118 0 10292 240 17316 0 0 UCSE Monitor 119 0 240 240 7264 0 0 Ether-Switch R *Nov 21 16:07:33.083: EHWIC ESWGE I2C read error *Nov 21 16:07:33.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:33.763: EHWIC ESWGE I2C read error *Nov 21 16:07:33.843: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:33.843: EHWIC ESWGE I2C read error *Nov 21 16:07:33.947: %ESWBC 120 0 6650484 6644332 31136 402 402 Exec 121 0 0 384 7264 0 0 dx_flush_dynamic 122 0 0 0 7264 334 334 IGMP Snooping Pr 123 0 0 0 7264 250 250 IGMP Snooping Re 124 0 240 240 7264 0 0 Call Management 125 0 202592 316 184276 0 0 USB Startup 126 0 GE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:34.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:34.627: EHWIC ESWGE I2C read error *Nov 21 16:07:34.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 0 25264 0 0 CF_INTERDEV_SCTP 127 0 240 240 7264 0 *Nov 21 16:07:34.707: EHWIC ESWGE I2C read error 0 BPSM stat Proces 128 0 240 0 4504 0 0 Async write proc 129 0 240 0 4504 0 0 Async write proc 130 0 240 0 4504 0 0 Async write proc 131 0 240 0 4504 0 0 Async write proc 132 0 0 0 *Nov 21 16:07:35.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:35.387: EHWIC ESWGE I2C read error *Nov 21 16:07:35.515: EHWIC ESWGE I2C read error *Nov 21 16:07:36.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 4264 0 0 DFS flush period 133 0 240 240 7264 2958 2957 ILPM 134 0 0 0 10264 0 0 PSE2 UART period 135 0 240 240 13264 4 4 SM Installer 136 0 386796 208008 158640 0 0 mDNS 137 0 1832 0 9096 0 0 FHRP Main thread 138 0 1908 0 9172 0 :07:36.195: EHWIC ESWGE I2C read error *Nov 21 16:07:36.275: EHWIC ESWGE I2C read error *Nov 21 16:07:36.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:37.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:37.179: 0 VRRP Main thread 139 0 54520 416 61368 0 0 VRRS Main thread 140 0 240 240 7264 0 0 IP NAT HA BGND P 141 0 240 240 13264 0 0 Auth Manager 142 0 0 0 7264 0 0 AUTH POLICY Fram 143 0 240 240 7264 0 0 Dot1x Mgr Proces 144 0 0 0 7264 0 0 802.1x W EHWIC ESWGE I2C read error *Nov 21 16:07:37.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:37.259: EHWIC ESWGE I2C read error *Nov 21 16:07:37.939: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:37.939: EHWIC ESWGE I2C read error *Nov 21 16:07:38.019: %ESWGE_ERR-3-CMDQ_FULL: Cebauth F 145 0 0 0 7264 0 0 EAP Framework 146 0 240 240 7264 0 0 CMD HANDLER 147 0 1176 240 8200 0 0 DTP Protocol 1ommand queue is Full, I2C cmd Read fail at in slot 148 0 0 0 7264 0 0 SFF8472 149 0 240 240 7264 0 0 PI MATM Aging Pr 150 0 240 240 7264 0 0 EtherChnl 151 0 *Nov 21 16:07:38.019: EHWIC ESWGE I2C read error *Nov 21 16:07:38.099: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:38.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:38.779: EHWIC ESWGE I2C read error *Nov 21 16: 3208 240 10232 0 0 call_home_les_oi 152 0 3168 0 28432 0 0 SMI Director DB 153 0 4728 0 119907:38.859: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 12 0 0 SMI CDP Update H 154 0 704 0 25968 0 0 SMI Backup Proce 155 0 240 240 13264 0 0 RG Faults Timer 156 0 240 240 13264 0 0 RG Protocol Time 157 0 240 2 *Nov 21 16:07:38.859: EHWIC ESWGE I2C read error *Nov 21 16:07:39.539: EHWIC ESWGE I2C read error *Nov 21 16:07:39.619: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:39.619: EHWIC ESWGE I2C read error 40 13264 0 0 RG Transport Tim 158 0 0 0 7264 0 0 RG VP 159 0 240 240 7264 0 0 RG AR 160 0 0 0 7264 0 0 DHCP Snooping 161 0 240 240 10264 0 0 IP Host Track Pr 162 0 240 240 7264 0 0 AAA Server 163 0 0 0 7264 *Nov 21 16:07:40.299: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:40.299: EHWIC ESWGE I2C read error *Nov 21 16:07:40.435: EHWIC ESWGE I2C read error *Nov 21 16:07:40.695: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:41.379: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C 0 0 AAA ACCT Proc 164 0 49388 0 56652 0 0 ACCT Periodic Pr 165 0 0 0 7264 0 0 AAA System Acct 166 0 499300 225464 235336 140 140 CDP Protocol 168 0 35752 0 9024 0 0 Call Home Timer 169 0 240 240 7264 0 0 AAA Dictionary R 170 0 240 240 13264 0 0 Etcmd Read fail at in slot 1 *Nov 21 16:07:41.379: EHWIC ESWGE I2C read error *Nov 21 16:07:41.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0l at in slot 17:41.459: EHWIC ESWGE I2C read error *Nov 21 16:07:42.139: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read faihernet LMI 171 0 240 240 10264 0 0 Ethernet OAM Pro 172 0 240 0 13504 0 0 CEF switching ba 173 0 224 0 4488 0 0 ADJ NSF process 174 0 1928 0 9192 0 0 TRACK Main threa 175 0 1868 0 9132 0 0 TRACK Client thr 176 0 240 240 13264 0 0 ATM OAM Input 17 *Nov 21 16:07:42.139: EHWIC ESWGE I2C read error *Nov 21 16:07:42.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:42.219: EHWIC ESWGE I2C read error *Nov 21 16:07:42.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:43.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd7 0 240 240 13264 0 0 ATM OAM TIMER 178 0 240 240 7264 0 0 IPAM/ODAP Events 179 0 49420 0 62684 0 0 IPAM Manager 180 0 Read fail at in slot 1 240 240 13264 0 0 IPAM Events 181 0 34272 10576 36960 0 0 IP ARP Adjacency 182 0 49384 0 56648 0 0 IP ARP Retry Age 183 0 535288 *Nov 21 16:07:43.023: EHWIC ESWGE I2C read error *Nov 21 16:07:43.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:43.103: EHWIC ESWGE I2C read error *Nov 21 16:07:43.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0 0 13264 711 711 IP Input 184 0 0 0 7264 0 0 ICMP event handl 185 0 240 240 7264 0 0 PIM register asy 186 0 6684 240 7:43.783: EHWIC ESWGE I2C read error 13708 6 6 MOP Protocols 187 0 240 240 7264 0 0 PPP SIP 188 0 240 240 7264 0 0 PPP Bind 189 0 240 240 13264 *Nov 21 16:07:43.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:43.863: EHWIC ESWGE I2C read error *Nov 21 16:07:44.543: EHWIC ESWGE I2C read error *Nov 21 16:07:44.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 0 0 PPP IP Route 190 0 0 0 10264 0 0 HQF TARGET DYNAM 192 0 0 0 7264 0 0 RIB LM VALIDATE 193 0 0 0 13264 0 0 SSS Manager 194 0 0 0 13264 0 0 SSS Policy Manag 195 0 0 0 7264 0 0 SSS Feature Mana 196 0 0 0 7264 0 :07:44.767: EHWIC ESWGE I2C read error *Nov 21 16:07:44.847: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:45.527: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:45.527: EHWIC ESWGE I2C read error *Nov 21 16:07:45.607: %El at in slot 1SWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai 0 SSS Feature Time 197 0 480 240 13504 3380 3380 Spanning Tree 198 0 240 240 13264 0 0 SSM connection m 199 0 0 0 13264 0 0 WAAS Process 200 0 0 0 7264 0 0 X.25 Encaps Mana 201 0 0 0 7264 0 0 IPv6 ping proces 202 0 240 240 25264 0 0 Ethernet CFM *Nov 21 16:07:45.607: EHWIC ESWGE I2C read error *Nov 21 16:07:46.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:46.287: EHWIC ESWGE I2C read error *Nov 21 16:07:46.391: EHWIC ESWGE I2C read error *Nov 21 16:07:46.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is 203 0 240 240 13264 0 0 Ethernet Timer C 204 0 240 240 13264 0 0 Ethernet Msec Ti 205 0 240 240 25264 0 0 Ethernet CFM PAL 206 0 0 0 7264 0 0 Auth-proxy AAA B 207 0 944 0 8208 0 0 Auth-proxy HTTP 208 0 0 0 7264 0 0 IP Admin SM Proc 209 0 Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:47.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:47.275: EHWIC ESWGE I2C read error *Nov 21 16:07:47.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:47.355: EHWIC ESWGE I2C read error *Nov 21 16:07:48.035: %ESWGE_ERR-3-CM240 240 10264 0 0 EAPoUDP Process 210 0 240 240 13264 0 0 KRB5 AAA 211 0 0 0 7264 0 0 FRR Background P 212 0 13668 DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 11520 23668 0 0 CEF background p 213 0 224 0 13512 0 0 fib_fib_bfd_sb e 214 0 224 0 10488 0 0 Tunnel FIB 215 0 0 0 *Nov 21 16:07:48.035: EHWIC ESWGE I2C read error *Nov 21 16:07:48.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:48.115: EHWIC ESWGE I2C read error *Nov 21 16:07:48.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 7264 0 0 HQF Output Shape 216 0 0 0 7264 0 0 HQF Input Shaper 217 0 240 240 7264 0 0 I:07:48.795: EHWIC ESWGE I2C read error PMUXv4 218 0 240 240 7264 0 0 IPMUXv6 219 0 0 0 7264 0 0 IPC UDP Input 220 0 11644 6516 18468 0 0 CEF: IPv4 proces 221 0 224 0 13488 0 *Nov 21 16:07:48.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:48.875: EHWIC ESWGE I2C read error 0 ADJ background GE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 222 0 224 0 13488 0 0 Collection proce 223 0 0 *Nov 21 16:07:49.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 7264 0 0 Socket Timers 224 0 0 0 7264 0 0 Cr *Nov 21 16:07:49.739: EHWIC ESWGE I2C read error itical Auth 225 0 480 240 7504 0 0 Dot1x Supplicant 226 0 480 240 7504 0 0 Dot1x Supplicant 227 0 480 240 7504 0 0 Dot1x Sup *Nov 21 16:07:49.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:49.819: EHWIC ESWGE I2C read error *Nov 21 16:07:50.499: EHWIC ESWGE I2C read error *Nov 21 16:07:50.723: EHWIC ESWGE I2C read error plicant 228 0 2060 496 9324 0 0 L2MM 229 0 0 0 7264 64 64 MRD 230 0 0 0 7264 10 10 IGMPSN 231 0 240 240 4264 0 0 L2X Switching Ev 232 0 0 0 7264 0 0 MAB Framework 233 0 4968 240 17992 0 0 RG Media Timer 234 0 *Nov 21 16:07:50.803: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:51.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:51.483: EHWIC ESWGE I2C read error *Nov 21 16:07:51.563: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:51.563: EHWIC ESWGE I2C read error 0 0 13264 0 0 RG If-Mgr Timer 235 0 0 0 13264 0 0 Routing Topology 236 0 4032 0 17296 0 0 IP RIB Update 237 0 7008 10624 10796 0 0 IP Background 238 0 66280 640 75904 1 1 IP Connected Rou 239 0 0 0 7264 0 0 IP Traceroute 240 0 372 *Nov 21 16:07:52.243: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:52.243: EHWIC ESWGE I2C read error *Nov 21 16:07:52.323: EHWIC ESWGE I2C read error *Nov 21 16:07:53.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:00 7636 0 0 Service Routing 241 0 35068 5196 37136 0 0 SR CapMan Proces 242 0 0 0 7264 0 0 SNMP Timers 243 0 85324 240 26520 0 0 SCTP Main Proces 244 0 0 0 13264 55 55 TCP Timer 245 0 0 50960 13264 0 0 TCP Protocols 246 0 16312 312 41264 7:53.003: EHWIC ESWGE I2C read error *Nov 21 16:07:53.083: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:53.083: EHWIC ESWGE I2C read error *Nov 21 16:07:53.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:53.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 0 0 HTTP CORE 247 0 0 0 7264 0 0 IUA Main Process 248 0 240 240 7264 0 0 RUDPV1 Main P at in slot 1roc 249 0 0 0 7264 0 0 bsm_timers 250 0 0 0 7264 *Nov 21 16:07:53.911: EHWIC ESWGE I2C read error 0 0 bsm_xmt_proc 251 0 240 372 7264 0 0 Flow Exporter Ti 252 0 240 240 7264 0 0 PPP *Nov 21 16:07:53.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:53.991: EHWIC ESWGE I2C read error *Nov 21 16:07:54.727: EHWIC ESWGE I2C read error *Nov 21 16:07:54.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: Compress Inp 253 0 240 240 7264 0 0 PPP Compress Res 254 0 944 0 62208 0 0 COPS 255 0 240 240 7264 0 0 Dialer Forwarder 256 0 17204 220 30248 1 1 ADJ resolve proc 258 0 232 0 13496 0 0 MFIB Master back 259 0 996 240 11020 0 0 MVPN Mgr Process 26007:54.807: EHWIC ESWGE I2C read error *Nov 21 16:07:54.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:55.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:55.567: EHWIC ESWGE I2C read error *Nov 21 16:07:55.723: EHWIC ESWGE I2C read error *Nov 21 16:07:56.403: %ESWGE_ERR-3 0 480 240 10504 0 0 Mult-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1icast Offloa 261 0 0 0 7264 0 0 RARP Input 262 0 240 240 10264 0 0 static 263 0 240 240 10264 0 0 App Route Proces 264 0 0 0 10264 0 0 IPv6 RIB Cleanup 265 0 0 0 10264 0 0 IPv6 RIB Event H 266 0 0 *Nov 21 16:07:56.403: EHWIC ESWGE I2C read error *Nov 21 16:07:56.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:56.483: EHWIC ESWGE I2C read error *Nov 21 16:07:57.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 0 10264 0 0 IP IRDP 267 0 0 0 7264 0 0 LAPB Process 268 0 0 0 7264 0 0 PAD InCall 269 0 240 240 13264 0 0 X.25 Background 270 0 5040 5040 10264 0 0 QoS stats proces 271 0 0 0 13264 0 0 VPDN call manage 272 0 175488 112784 61712 :07:57.175: EHWIC ESWGE I2C read error *Nov 21 16:07:57.255: EHWIC ESWGE I2C read error *Nov 21 16:07:57.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:58.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:58.035: 33 33 DHCPD Receive 273 0 0 0 10264 0 0 IPv6 Static Hand 274 0 0 0 10264 0 0 Ethernet Datapla 275 0 4728 0 14992 0 0 Ethernet PM Proc 276 0 240 240 EHWIC ESWGE I2C read error 10264 0 0 Ethernet PM Soft 277 0 0 0 13264 0 0 Ethernet PM Moni 278 0 240 240 7264 0 *Nov 21 16:07:58.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:58.115: EHWIC ESWGE I2C read error *Nov 21 16:07:58.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:58.795: EHWIC ESWGE I2C read error *Nov 21 16:07:58.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm 0 RLM groups Proce 279 0 240 240 7264 0 0 PPP NBF 280 0 1044 240 26068 0 0 Border Element p 281 0 1196 240 26220 0 0 gk procd Read fail at in slot 1ess 282 0 376 240 7400 0 0 SDEE Management 283 0 240 240 7264 0 0 Inspect process 285 0 240 240 7264 0 0 FW DP Inspect pr *Nov 21 16:07:58.875: EHWIC ESWGE I2C read error *Nov 21 16:07:58.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:07:59.775: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:07:59.775: EHWIC ESWGE I2C read error *Nov 21 1 286 0 240 240 7264 0 0 CCE DP URLF cach 287 0 1184 240 8208 0 0 URL filter proc 288 0 0 6:07:59.855: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 13264 0 0 IPS Process 289 0 16824 240 29848 0 0 IPS Auto Update 290 0 0 0 7264 0 0 Select Timers 291 0 66408 240 73432 0 0 HTTP Process 292 0 20 *Nov 21 16:07:59.855: EHWIC ESWGE I2C read error *Nov 21 16:08:00.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:00.535: EHWIC ESWGE I2C read error 72 240 9096 0 0 CIFS API Process 293 0 12580 240 19604 0 0 CIFS Proxy Proce 294 0 228620 556 226064 2 2 Crypto HW Proc 295 0 0 0 7264 0 0 IPv6 Inspect Tim 296 0 0 0 7264 0 0 IPSECv6 PS Proc 297 0 1048 240 8072 0 0 CRM_CALL_UPDATE_ 299 0 240 240 *Nov 21 16:08:01.379: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:01.379: EHWIC ESWGE I2C read error *Nov 21 16:08:01.623: EHWIC ESWGE I2C read error *Nov 21 16:08:01.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:02.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C 7264 0 0 AAA Cached Serve 300 0 240 240 7264 0 0 ENABLE AAA 301 0 0 0 7264 0 0 EM Background Pr 302 0 0 0 7264 0 0 IDMGR CORE 303 0 0 0 7264 0 0 Key chain liveke 304 0 240 240 7264 0 0 LINE AAA 305 0 240 240 7264 0 cmd Read fail at in slot 1 *Nov 21 16:08:02.511: EHWIC ESWGE I2C read error *Nov 21 16:08:02.591: %ESWGE_ERR-3-CMDQ_FULL: Commail at in slot 1nd queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:02.591: EHWIC ESWGE I2C read error *Nov 21 16:08:03.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fa 0 LOCAL AAA 306 0 1044 240 8068 0 0 TPLUS 307 0 32168 30624 8808 12 12 NIST rng proc 308 0 1004 240 14028 0 0 LDAP process 309 0 3312 240 12336 0 0 Crypto WUI 310 0 51488 104 58584 0 0 MMA DB TIMER 311 0 30400 240 55424 0 0 STUN_APP *Nov 21 16:08:03.271: EHWIC ESWGE I2C read error *Nov 21 16:08:03.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:03.351: EHWIC ESWGE I2C read error *Nov 21 16:08:03.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:04.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c 312 0 944 0 26208 0 0 STUN_TEST 313 0 240 240 7264 0 0 VSP_MGR 314 0 0 md Read fail at in slot 1 0 7264 0 0 EAP Process 315 0 944 0 26208 0 0 FW *Nov 21 16:08:04.155: EHWIC ESWGE I2C read error _TEST_TRP 316 0 50804 1432 56788 0 0 Timer Library 317 0 240 240 7264 0 0 Crypto Support 318 0 *Nov 21 16:08:04.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:04.235: EHWIC ESWGE I2C read error *Nov 21 16:08:04.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:04.915: EHWIC ESWGE I2C read error *Nov 21 16 0 0 7264 0 0 EPM MAIN PROCESS 319 0 240 240 4264 0 0 RSCMSM VOLUME MO 320 0 240 240 7264 0 0 CSDB Timer proce 321 0 0 0 7264 0 0 crypto engine pr 322 0 0 0 13264 0 0 RSA background p 323 0 284824 237896 60268 1 1 Crypto CA 324 0 0 0:08:04.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:04.995: EHWIC ESWGE I2C read error *Nov 21 16:08:05.691: EHWIC ESWGE I2C read error *Nov 21 16:08:05.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:05.895: EHWIC ESWGE I2C read error *Nov 21 16:08:05.975: %ESWGE_ERR-3-C 13264 0 0 Crypto PKI-CRL 325 0 0 0 13264 0 0 encrypt proc 326 0 5564 104 12828 0 0 MMA DP TIMER 327 0 5916872 2856 5507860 56 56 FLEX DSPRM MAIN 328 0 0 0 7264 0 0 FLEX DSP KEEPALI 329 0 98928 4000 98472 477 477 CCVPM_HTSP 330 0 240 240 7264 MDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:06.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:06.655: EHWIC ESWGE I2C read error *Nov 21 16:08:06.735: EHWIC ESWGE I2C read error *Nov 21 16:08:07.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 0 0 VPM_MWI_BACKGROU 331 0 584 240 7608 0 0 VPM_CABLE_STAT_P 332 0 932 0 8196 0 0 VPM_CONN_CHK_BAC 333 0 436 0 7700 0 0 CCVPM_R2 334 0 872 0 8136 0 0 IP TRUST Registe 335 0 0 0 7264 0 0 EPHONE MWI Refre 336 0 0 0 7264 0 0 FB/K:08:07.415: EHWIC ESWGE I2C read error *Nov 21 16:08:07.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:07.495: EHWIC ESWGE I2C read error *Nov 21 16:08:07.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:08.335:S Log HouseK 337 0 240 240 7264 0 0 EPHONE MWI BG Pr 338 0 8244 0 15508 0 0 Skinny HW confer 339 0 868 240 25892 0 0 CTI Front End Pr 340 0 240 240 7264 0 %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10 CTI Call Control 341 0 240 240 7264 0 0 CTI Line Monitor 342 0 0 0 7264 0 0 CME CTI Device M 343 *Nov 21 16:08:08.335: EHWIC ESWGE I2C read error *Nov 21 16:08:08.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:08.415: EHWIC ESWGE I2C read error *Nov 21 16:08:09.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0 0 240 240 13264 0 0 VOICE REG BG Pro 344 0 240 240 13264 0 0 CME Extension Mo 345 0 0 0 7264 0 0 Presence Process 346 0 08:09.095: EHWIC ESWGE I2C read error 0 7264 0 0 DS0 PCM Capture 347 0 9048 240 22072 0 0 Sip MPA 349 0 944 0 62208 0 0 http client proc 351 0 271152 *Nov 21 16:08:09.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:09.175: EHWIC ESWGE I2C read error *Nov 21 16:08:09.887: EHWIC ESWGE I2C read error *Nov 21 16:08:09.967: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08: 0 281416 0 0 QOS_MODULE_MAIN 352 0 284 0 25548 0 0 RPMS_PROC_MAIN 353 0 0 0 25264 0 09.967: EHWIC ESWGE I2C read error 0 VoIP AAA 354 0 25604 240 32628 0 0 Dialog Manager 355 0 201748 0 215012 0 0 VOIP_FMD_MAIN 356 0 124396 388 137272 376 376 Crypto IKEv2 357 0 0 0 7264 *Nov 21 16:08:10.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:10.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:10.727: EHWIC ESWGE I2C read error *Nov 21 16:08:10.867: EHWIC ESWGE I2C read error *Nov 21 16:08:11.547: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd 0 0 IKEv2 AAA handle 358 0 240 Read fail at in slot 1 584 7264 0 0 CRYPTO MAP FREE 359 0 0 0 13264 0 0 Crypto INT 360 0 8084 1328 21108 10 10 Crypto IKE Dispa 361 0 298932 176788 128920 74 74 Crypto IKMP 362 0 0 0 10264 0 0 IPSEC manual key 363 0 99932 4536 40616 5 *Nov 21 16:08:11.547: EHWIC ESWGE I2C read error *Nov 21 16:08:11.627: EHWIC ESWGE I2C read error *Nov 21 16:08:11.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:12.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:5 IPSEC key engine 364 0 0 0 7264 0 0 CRYPTO QoS proce 365 0 73836 0 99100 0 0 Crypto ACL 366 0 0 0 7264 0 0 Crypto PAS Proc 367 0 2040 2316 14192 0 0 IPSec background 368 0 240 240 7264 0 0 GKM GM Process 08:12.531: EHWIC ESWGE I2C read error7492 0 0 GKM KS PROCESS *Nov 21 16:08:12.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail atHWIC ESWGE I2C read error in slot 1 *Nov 21 16:08:12.611: EHWIC ESWGE I2C read error *Nov 21 16:08:13.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:13.291: E 370 0 0 0 10264 0 0 Crypto Device Up 371 0 0 0 7264 1 1 Multi-ISA Event 372 0 0 0 7264 0 0 Multi-ISA Cleanu 373 0 0 0 7292 0 0 crypto raw delet 374 0 0 0 10264 0 0 Licensing MIB pr 375 0 240 240 7264 0 0 Control-plane ho 376 0 *Nov 21 16:08:13.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:13.371: EHWIC ESWGE I2C read error *Nov 21 16:08:14.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:14.051: EHWIC ESWGE I2C read error *Nov 21 16:08:14.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm0 21432 7264 0 0 PM Callback 377 0 240 240 7264 0 0 dhcp snooping sw 379 0 240 612 7264 0 0 AAA SEND STOP EV 380 0 0 d Read fail at in slot 10 13264 0 0 Test AAA Client 381 0 2532 0 9796 0 0 dcm_cli_engine 382 0 5592 264 12668 0 0 dcm_cli_provider 383 0 20292 5748 2 *Nov 21 16:08:14.131: EHWIC ESWGE I2C read error *Nov 21 16:08:14.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:14.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:14.971: EHWIC ESWGE I2C read error *Nov 21 161972 0 0 DCM Core Thread 384 0 11972 5156 17248 0 0 EEM ED Routing 385 0 286004 4988 291280 2101 2069 E:08:15.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1EM ED Syslog 386 0 211196 4988 216472 0 0 EEM ED Generic 387 0 11620 4988 16896 0 0 EEM ED NHRP 388 0 11628 4988 16904 0 0 EEM ED Track 389 0 13532 5040 18756 0 *Nov 21 16:08:15.051: EHWIC ESWGE I2C read error *Nov 21 16:08:15.783: EHWIC ESWGE I2C read error *Nov 21 16:08:15.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:15.991: EHWIC ESWGE I2C read error 0 EEM ED Resource 390 0 240 240 7264 0 0 RMON Recycle Pro 391 0 240 240 7264 0 0 RMON Deferred Se 392 0 0 0 7264 0 0 Syslog Traps 393 0 0 0 7264 0 0 WAN Optimization 394 0 944 0 8208 0 0 IKEv2 Cluster Lo 395 0 0 0 13264 0 0 IKEv2 FlexV *Nov 21 16:08:16.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:16.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:16.771: EHWIC ESWGE I2C read error *Nov 21 16:08:16.851: EHWIC ESWGE I2C read error *Nov 21 16:08cmd Read fail at in slot 1:17.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C PN Pr 396 0 0 0 7264 0 0 Crypto cTCP proc 398 0 11268 4436 13936 6 6 VLAN Manager 399 0 0 0 7128 8 8 DHCPD Timer 400 0 2460 480 15244 0 0 RBM CORE 401 0 3064 480 9848 0 0 CTS credentials 402 0 1384652 20524 1371392 0 0 EEM Server 403 0 *Nov 21 16:08:17.531: EHWIC ESWGE I2C read error *Nov 21 16:08:17.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:17.611: EHWIC ESWGE I2C read error *Nov 21 16:08:18.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: 131372 88780 119340 0 0 Call Home proces 404 0 9752 76 9012 0 0 Call Home DS 405 0 1976 168 8952 0 0 Call Home DSfile 406 0 9848 1868 15000 0 0 DCM snmp dp Thre 407 0 3536 264 10484 0 0 snmp dcm ma shim 408 0 14860 14748 18848 0 0 Bulkstat-Client 409 0 3780 264 08:18.291: EHWIC ESWGE I2C read error *Nov 21 16:08:18.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:18.371: EHWIC ESWGE I2C read error *Nov 21 16:08:18.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:19.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 10696 0 0 dcm_expression_p 410 0 13052 1208 22108 0 0 EEM Policy Direc 411 0 240 240 7264 0 at in slot 1 0 TGRM Preempt 412 0 11516 4988 16792 0 0 EEM ED CLI 413 0 11516 *Nov 21 16:08:19.131: EHWIC ESWGE I2C read error 4988 16792 0 0 EEM ED Counter 414 0 11984 4988 17260 0 0 EEM ED Interface 415 0 11516 4988 16792 *Nov 21 16:08:19.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:19.211: EHWIC ESWGE I2C read error *Nov 21 16:08:20.043: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:20.043: EHWIC ESWGE I2C read error *Nov 21 16 0 0 EEM ED IOSWD 416 0 11516 4988 16792 0 0 EEM ED None 417 0 11516 4988 16792 0 0 EEM ED OIR 418 0 32444 5044 37208 0 0 EEM ED RF 419 0 11516 4988 16792 0 0 EEM ED SNMP 420 0 11516 4988 16792 0 0 EEM ED SNMP Obje 421 0 11620 4988 16896 0 0 EEM E:08:20.123: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:20.123: EHWIC ESWGE I2C read error *Nov 21 16:08:20.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:20.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:20.971: EHWIC ESWGE I2D SNMP Noti 422 0 11684 4988 16960 C read error 0 0 EEM ED Timer 423 0 11516 4988 16792 0 0 EEM ED Test 424 0 11516 4988 16792 0 0 EEM ED Config 425 0 11516 4988 16792 0 0 EEM ED Env 426 0 16816 4988 22092 0 0 EEM ED DS 427 0 16816 4988 22092 0 0 EEM ED CRASH 428 *Nov 21 16:08:21.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:21.051: EHWIC ESWGE I2C read error *Nov 21 16:08:21.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:21.731: EHWIC ESWGE I2C read error *Nov 21 16:08:21.891: EHWIC ESWGE I2C read error *Nov 21 16:08:22.571: % 0 0 0 13264 0 0 CFT Timer Proces 429 0 16672 4988 21948 0 0 EEM ED Nf 430 0 279456 278008 14712 2315 2315 Syslog 432 0 11560 4988 16836 0 0 EEM ED RPC 433 0 11516 4988 16792 0 0 EEM ED Ipsla 434 0 0 0 7264 0 0 IP SLAs Ethernet 435 0 0 ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:22.571: EHWIC ESWGE I2C read error *Nov 21 16:08:22.651: EHWIC ESWGE I2C read error *Nov 21 16:08:22.799: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:23.479: %ESWGE_ERR-3-CMD 0 7264 0 0 trunk conditioni 436 0 4660 0 11924 0 0 trunk conditioni 437 0 0 0 7264 0 0 VDC process 438 0 240 0 25504 0 0 tHUB Q_FULL: Command queue is Full, I2C cmd Read fail at in slot 14 MLD 440 0 316476 316384 13356 0 0 mdns Timer Proce 441 0 1728 240 14752 *Nov 21 16:08:23.479: EHWIC ESWGE I2C read error *Nov 21 16:08:23.559: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:23.559: EHWIC ESWGE I2C read error *Nov 21 16:08:24.239: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:24.239: EHWIC ESWGE I2C read error *Nov 21 16:08:24.319: 0 0 MRIB Process 442 0 0 0 9264 0 0 Key Proc 443 0 240 240 7264 0 0 TRP_PSEUDOTIMER 444 0 544 240 7568 0 0 Resource Monitor 445 0 240 240 7264 0 0 Resource Availab 446 0 3644 240 16668 0 0 TRPAPP 447 0 213244 1432 210852 0 0%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:24.319: EHWIC ESWGE I2C read error *Nov 21 16:08:24.447: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:25.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 CC-API_VCM 127: EHWIC ESWGE I2C read error 448 0 14808 240 75832 8 8 VOIP_RTCP 449 0 240 240 13264 0 0 confmsp 450 0 255488 608 36032 0 0 Session Applicat 451 0 204972 50800 185316 118 118 DSMP 452 0 605244 101848 516428 0 0 VTSP 453 0 41192 0 66456 0 0 TSP *Nov 21 16:08:25.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:25.207: EHWIC ESWGE I2C read error *Nov 21 16:08:25.887: EHWIC ESWGE I2C read error *Nov 21 16:08:26.015: EHWIC ESWGE I2C read error *Nov 21 16:08:26.695: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:26.695: E 454 0 412644 240 437668 0 0 swmtp_msp 455 0 2628 240 15652 0 0 RECMSPAPP 456 0 828 0 14092 0 0 lib_off_app 457 0 0 0 7264 0 0 Media Record 458 0 240 240 7264 0 0 Voice Player 459 0 0 0 7264 0 0 Resource Measure 460 0 240HWIC ESWGE I2C read error *Nov 21 16:08:26.775: EHWIC ESWGE I2C read error *Nov 21 16:08:26.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:27.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:27.675: EHWIC ESWGE I2 240 13264 0 0 vxcmsp 461 0 240 240 7264 0 0 Synthetic Video 462 0 229772 240 242796 0 0 VOICE_HA_ACTIVE 463 0 240 240 13264 0 0 VOICE_HA_STANDBY 464 0 39412 240 52436 0 0 Voip HA SessC read error ion 465 0 7088 456 13896 0 0 EEM Helper Threa 466 0 6984 240 20 *Nov 21 16:08:27.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:27.755: EHWIC ESWGE I2C read error *Nov 21 16:08:28.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:28.435: EHWIC ESWGE I2C read error *Nov 21 16:08:28.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm096 0 0 NHRP 467 0 1612068 206916 1468816 39 39 CCH323_CT 468 0 0 0 7264 0 0 CCH323_DNS 469 0 2671508 240 2732532 0 0 CCSIP_SPI_CONTRO 470 0 0 0 13264 0 0 CCSIP_DNS 471 0 154092 240 179116 0 0 CCSIP_UDP_SOCKET 472 0 295924 240 320948 0 d Read fail at in slot 1 *Nov 21 16:08:28.515: EHWIC ESWGE I2C read error *Nov 21 16:08:28.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:29.323: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:29.323: EHWIC ESWGE I2C read error *Nov 21 16:08:29.403: %ESWGE_ERR-3-CMDQ_FULL: Com 0 CCSIP_TCP_SOCKET 473 0 298084 240 3231mand queue is Full, I2C cmd Read fail at in slot 108 0 0 CCSIP_TLS_SOCKET 474 0 507180 0 532444 0 0 RTPSPI 475 0 480 240 7548 0 0 Multicast Replic 476 0 0 2784 13264 0 0 Tunnel Security 477 0 53032 2832 62088 0 0 Crypto SS Proces 480 0 1260 240 14284 0 0 IP SNMP *Nov 21 16:08:29.403: EHWIC ESWGE I2C read error *Nov 21 16:08:30.083: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:30.083: EHWIC ESWGE I2C read error *Nov 21 16:08:30.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: 481 0 0 0 13264 0 0 PDU DISPATCHER 482 0 1056 1056 13264 0 0 SNMP ENGINE 483 0 1260 240 14324 0 0 IP SNMPV6 484 0 0 0 13264 0 0 SNMP ConfCopyPro 485 0 240 240 13264 0 0 SNMP Traps 486 0 239348 240 186544 0 0 SCCP Application 487 0 08:30.163: EHWIC ESWGE I2C read error *Nov 21 16:08:30.927: EHWIC ESWGE I2C read error *Nov 21 16:08:31.135: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:31.135: EHWIC ESWGE I2C read error *Nov 21 16:08:31.215: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:31.895: %ESWGE_ERR-3- 5080 240 12104 0 0 Skinny MOH Event 488 0 7546748 7301976 246776 0 0 Skinny Socket Se 489 0 240 240 13264 0 0 Web Write Housek 490 0 240 240 13264 10 10 NTP 491 0 240 0 7368 0 0 DHCPD Database 492 0 381832 8976 372828 1 1 OSPF-100 Router 493 0 0 0 CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:31.895: EHWIC ESWGE I2C read error *Nov 21 16:08:31.975: EHWIC ESWGE I2C read error *Nov 21 16:08:32.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:32.655: EHWIC ESWGE I2C read error 7196 127 127 OSPF-100 Hello 112204516 Total ------------------ show process cpu ------------------ CPU utilization for five seconds: 3%/0%; one minute: 11%; five minutes: 10% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 1 0 58 0 0.00% 0.00% 0.00% 0 Chunk Manager 2 16 124 129 0.00% 0.01% 0.00% 0 Load Meter 3 0 1 *Nov 21 16:08:32.735: EHWIC ESWGE I2C read error *Nov 21 16:08:32.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:33.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:33.515: EHWIC ESWGE I2C read error *Nov 21 16:08:33.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm 0 0.00% 0.00% 0.00% 0 LICENSE AGENT 4 0 36 0 0.00% 0.00% 0.00% 0 EDDRI_MAINd Read fail at in slot 1 5 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers 6 800 102 7843 0.00% 0.11% 0.11% 0 Check heaps 7 0 12 0 0.00% 0.00% 0.00% 0 Pool Manager 8 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro 9 0 2 *Nov 21 16:08:33.595: EHWIC ESWGE I2C read error *Nov 21 16:08:34.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:34.275: EHWIC ESWGE I2C read error *Nov 21 16:08:34.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: 0 0.00% 0.00% 0.00% 0 Timers 10 4 120 33 0.00% 0.00% 0.00% 0 WATCH_AFS 11 0 4 0 0.00% 0.00% 0.00% 0 License Client N 12 0 1 0 0.00% 0.00% 0.00% 0 Image License br 13 1828 13 140615 0.00% 0.41% 0.26% 0 Licensing Auto U 14 488 603 809 0.00% 0.06% 0.05% 0 Environmental mo 15 0 127 0 0.008:34.355: EHWIC ESWGE I2C read error *Nov 21 16:08:35.035: EHWIC ESWGE I2C read error *Nov 21 16:08:35.255: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:35.255: EHWIC ESWGE I2C read error *Nov 21 16:08:35.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:36.015: %ESWGE_ERR-3-C0% 0.00% 0.00% 0 IPC Event Notifi 16 0 12 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach 17 0 1 0 0.00% 0.00% 0.00% 0 IPC Session Serv 18 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 19 4 608 6 0.00% 0.00% 0.00% 0 IPC Periodic Tim 20 0 608 0 0.07% 0.00% 0.00% 0 IPC Deferred Por 21 0 1 0 0.00% 0.0MDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:36.015: EHWIC ESWGE I2C read error *Nov 21 16:08:36.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:36.095: EHWIC ESWGE I2C read error *Nov 21 16:08:36.775: %ESWGE_ERR-3-CMDQ_FULL: Com0% 0.00% 0 IPC Process leve 22 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 23 0 37 0 0.00% 0.00% 0.00% 0 IPC Check Queue 24 0 1 0 0.00% 0.00% 0mand queue is Full, I2C cmd Read fail at in slot 1.00% 0 IPC Seat RX Cont 25 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat TX Cont 26 0 67 0 0.00% 0.00% 0.00% 0 IPC Keep Alive M 27 0 127 0 0.00% 0.00% 0.0 *Nov 21 16:08:36.775: EHWIC ESWGE I2C read error *Nov 21 16:08:36.855: EHWIC ESWGE I2C read error *Nov 21 16:08:36.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:37.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 160% 0 IPC Loadometer 28 0 1 0 0.00% 0.00% 0.00% 0 Crash writer 29 0 1 0 0.00% 0.00% 0.00% 0 Exception contro :08:37.627: EHWIC ESWGE I2C read error 30 128 2379 53 0.15% 0.15% 0.15% 0 Skinny Msg Serve 31 0 1 0 0 *Nov 21 16:08:37.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1.00% 0.00% 0.00% 0 IFS Agent Manage 32 16 40 400 0.00% 0.00% 0.00% 0 ARP Input 33 0 677 0 0.00% 0.00% 0.00% 0 *Nov 21 16:08:37.707: EHWIC ESWGE I2C read error *Nov 21 16:08:38.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:38.387: EHWIC ESWGE I2C read error *Nov 21 16:08:38.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:38.467: EHWIC ESWGE I2C read error *Nov 21 16:08:39.147: ARP Background 34 0 2 0 0.00% 0.00% 0.00% 0 ATM Idle Timer 35 0 1 0 0.00% 0.00% 0.00% 0 ATM ASYNC PROC 36 0 1 0 0.00% 0.00% 0.00% 0 CEF MIB API 37 0 1 0 0.00% 0.00% 0.00% 0 AAA_SERVER_DEADT 38 0 1 0 0.00% 0.00% 0.00% 0 Policy Manager 39 0 2 0 0.00% 0.00% 0.00% 0 DDR TimEHWIC ESWGE I2C read error *Nov 21 16:08:39.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:39.311: EHWIC ESWGE I2C read error *Nov 21 16:08:39.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:40.071: %ESWGE_ERR-ers 40 4 4 1000 0.00% 0.00% 0.00% 0 Entity MIB API 41 0 2 0 0.00% 0.00% 0.00% 0 PrstVbl 42 0 2 0 0.00% 0.00% 0.00% 0 Serial Backgroun 43 0 1 0 0.00% 0.00% 0.00% 0 RMI RM Notify Wa 44 0 1 0 0.00% 0.00% 0.00% 0 License IPC stat 45 0 1 0 0.00% 0.00% 0.00% 0 License IPC se3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:40.071: EHWIC ESWGE I2C read error *Nov 21 16:08:40.151: EHWIC ESWGE I2C read error *Nov 21 16:08:40.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:40.831: EHWIC ESWGE I2C read error *Nov 21 16:08:40.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue rv 46 3468 1385 2503 0.00% 0.00% 0.13% 0 SMART 47 4 1 4000 0.00% 0.00% 0.00% 0 RF SCTPthread 48 0 1 0 0.00% 0.00% 0.00% 0 CHKPT RG SCTPthr 49 0 40 0 0.00% 0.00% 0.00% 0 ARP Snoop 50 0 609 0 0.00% 0.00% 0.00% 0 GraphIt 51 0 2 0 0.00% 0.00% 0.00% 0 Dialer event is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:40.911: EHWIC ESWGE I2C read error *Nov 21 16:08:41.055: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:41.735: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:41.735:52 0 1 0 0.00% 0.00% 0.00% 0 SERIAL A'detect 53 0 2 0 0.00% 0.00% 0.00% 0 XML Proxy Client 54 0 8 0 0.00% 0.00% 0.00% 0 crypto sw pk pro 55 EHWIC ESWGE I2C read error 0 2 0 0.00% 0.00% 0.00% 0 ISM-VPN backgrou 56 0 1 0 0.00% 0.00% 0 *Nov 21 16:08:41.815: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1.00% 0 ISM-VPN Cleanup 57 0 1 0 0.00% 0.00% 0.00% 0 Critical Bkgnd 58 *Nov 21 16:08:41.815: EHWIC ESWGE I2C read error *Nov 21 16:08:42.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:42.495: EHWIC ESWGE I2C read error *Nov 21 16:08:42.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:42.575: EHWIC ESWGE I2C read error *Nov 21 16:08:43.255: EHWIC 12 407 29 0.00% 0.00% 0.00% 0 Net Background 59 0 3 0 0.00% 0.00% 0.00% 0 IDB Work 60 12 1022 11 0.00% 0.01% 0.00% 0 Logger 61 4 599 6 0.00% 0.01% 0.00% 0 TTY Background 62 0 10 0 0.00% 0.00% 0.00% 0 CRYPTO IKMP IPC 63 0 2 0 0.00% 0.00% 0.00% 0 CTS CORE 64 4ESWGE I2C read error *Nov 21 16:08:43.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:43.335: EHWIC ESWGE I2C read error *Nov 21 16:08:43.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:44.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 5 800 0.00% 0.00% 0.00% 0 SXP CORE 65 8 12 666 0.00% 0.00% 0.00% 0 RF Slave Main Th 66 0 30 0 0.00% 0.00% 0.00% 0 IF-MGR control p 67 0 64 0 0.00% 0.00% 0.00% 0 IF-MGR event pro 68 0 1 0 0.00% 0.00% 0.00% 0 Inode Table Dest 69 0 2 0 0.00% 0.00% 0.00% 0 cpf_msg_holdq_pr 70 0 21 16:08:44.095: EHWIC ESWGE I2C read error *Nov 21 16:08:44.211: EHWIC ESWGE I2C read error *Nov 21 16:08:44.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:44.891: EHWIC ESWGE I2C read error *Nov 21 16:08:44.971: EHWIC ESWGE I2C read error *Nov 21 16:08:45.119: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd W 1 0 0.00% 0.00% 0.00% 0 cpf_msg_rcvq_pro 71 0 1 0 0.00% 0.00% 0.00% 0 cpf_process_tpQ 72 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 73 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 74 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 75 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 76 0 1 rite fail at in slot 1 *Nov 21 16:08:45.799: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:45.799: EHWIC ESWGE I2C read error *Nov 21 16:08:45.879: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:45.879: EHWIC ESWGE I2C read 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 77 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 78 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 79 0 1 error 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 80 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test cl *Nov 21 16:08:46.559: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ien 81 0 1 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 82 0 1 *Nov 21 16:08:46.559: EHWIC ESWGE I2C read error *Nov 21 16:08:46.639: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:46.639: EHWIC ESWGE I2C read error *Nov 21 16:08:47.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:47.319: EHWIC ESWGE I2C read error *Nov 21 16:08:47.399: 0 0.00% 0.00% 0.00% 0 CHKPT Test clien 83 0 1 0 0.00% 0.00% 0.00% 0 Crypto PKI-HA 84 0 1 0 0.00% 0.00% 0.00% 0 IKE HA Mgr 85 0 1 0 0.00% 0.00% 0.00% 0 IPSEC HA Mgr 86 0 7 0 0.00% 0.00% 0.00% 0 TDM Management 87 0 12 0 0.00% 0.00% 0.00% 0 RF Master Main T 88 0 7 0 0.0%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:47.399: EHWIC ESWGE I2C read error *Nov 21 16:08:47.479: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:48.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:48.259: EHWIC ESWGE I2C read error0% 0.00% 0.00% 0 RF Master Status 89 0 80 0 0.00% 0.00% 0.00% 0 Net Input 90 4 125 32 0.00% 0.00% 0.00% 0 Compute load avg 91 132 23 5739 0.00% 0.01% 0.00% 0 Per-minute Jobs 92 92 650 141 0.31% 0.08% 0.06% 0 Per-Second Jobs 93 0 1 0 0.00% 0.00% 0.00% 0 AggMgr Process 94 0 1 0 0.00% 0.0 *Nov 21 16:08:48.367: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:48.367: EHWIC ESWGE I2C read error *Nov 21 16:08:49.047: EHWIC ESWGE I2C read error *Nov 21 16:08:49.183: EHWIC ESWGE I2C read error *Nov 21 16:08:49.447: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:50.127: 0% 0.00% 0 Token Daemon 95 0 31 0 0.00% 0.00% 0.00% 0 Transport Port A 96 8 127 62 0.00% 0.00% 0.00% 0 HC Counter Timer 97 12 222 54 0.00% 0.00% 0.00% 0 SM Monitor 98 0 2 0 0.00% 0.00% 0.00% 0 Bryce I2C CMD Qu 99 0 2 0 0.00% 0.00% 0.00% 0 SM Installer 100 0 1 0 0.00% 0.00% 0.0%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:50.127: EHWIC ESWGE I2C read error *Nov 21 16:08:50.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:50.207: EHWIC ESWGE I2C read error *Nov 21 16:08:50.887: %ESWGE_ERR-30% 0 dev_device_inser 101 0 1 0 0.00% 0.00% 0.00% 0 dev_device_remov 102 0 1 0 0.00% 0.00% 0.00% 0 sal_dpc_process 103 0 1 0 0.00% 0.00% 0.00% -CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 ARL Table Manage 104 0 2 0 0.00% 0.00% 0.00% 0 ESWPPM 105 0 2 0 0.00% 0.00% 0.00% 0 Eswilp Storm Con 106 0 2 0 0.00% 0.00% 0.00% 0 *Nov 21 16:08:50.887: EHWIC ESWGE I2C read error *Nov 21 16:08:50.967: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:50.967: EHWIC ESWGE I2C read error *Nov 21 16:08:51.647: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16ESWILPPM 107 0 2 0 0.00% 0.00% 0.00% 0 Eswilp Storm Con 108 1368 28 48857 0.00% 0.00% 0.03% 0 DXMRVL 109 0 1 0 0.00% 0.00% 0.00% 0 esw_mrvl mat que 110 84 287 292 0.00% 0.00% 0.00% 0 ehwic_eswge Proc 111 0 1 0 0.00% 0.00% 0.00% 0 RF_INTERDEV_DELA 112 0 1 0 0.00% 0.00% 0.00% 0 RF_INTE:08:51.647: EHWIC ESWGE I2C read error *Nov 21 16:08:51.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:51.727: EHWIC ESWGE I2C read error *Nov 21 16:08:51.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:52.487: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at RDEV_SCTP 113 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Identity 114 4 77 51 0.00% 0.00% 0.00% 0 EEM ED ND 115 0 1 0 0.00% 0.00% 0.00% 0 VIDEO DSPRM MAIN 116 0 2 0 0.00% 0.00% 0.00% 0 VNM DSPRM MAIN 117 0 7 0 0.00% 0.00% 0.00% 0 FLEX DNLD MAIN 118 0 2 0 0.00% 0.00% 0.00% 0 UCSE Monitor in slot 1 *Nov 21 16:08:52.487: EHWIC ESWGE I2C read error *Nov 21 16:08:52.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:52.567: EHWIC ESWGE I2C read error *Nov 21 16:08:53.247: EHWIC ESWGE I2C read error *Nov 21 16:08:53.371: EHWIC ESWGE I2C read error *N 119 0 2 0 0.00% 0.00% 0.00% 0 Ether-Switch RBC 120 12472 1777 7018 0.07% 1.71% 2.20% 0 Exec 121 0 5 0 0.00% 0.00% 0.00% 0 dx_flush_dynamic 122 4 65 61 0.00% 0.00% 0.00% 0 IGMP Snooping Pr 123 8 116 68 0.00% 0.00% 0.00% 0 IGMP Snooping Re 124 0 23 0 0.00% 0.00% 0.00% 0 Call Management 1ov 21 16:08:53.639: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:54.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:54.319: EHWIC ESWGE I2C read error *Nov 21 16:08:54.399: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:54.399: EHWIC25 4 2 2000 0.00% 0.00% 0.00% 0 USB Startup 126 0 1 0 0.00% 0.00% 0.00% 0 CF_INTERDEV_SCTP 127 24 1276 18 0.00% 0.02% 0.00% 0 BPSM stat Proces 128 ESWGE I2C read error 0 1 0 0.00% 0.00% 0.00% 0 Async write proc 129 0 1 0 0.00% 0.00% 0.00% 0 Async write proc 130 0 1 0 0.00% 0.00% 0.00% 0 Async write proc 131 *Nov 21 16:08:55.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:55.079: EHWIC ESWGE I2C read error *Nov 21 16:08:55.159: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:55.159: EHWIC ESWGE I2C read error *Nov 21 16:08:5 0 3 0 0.00% 0.00% 0.00% 0 Async write proc 132 4 11 363 0.00% 0.00% 0.00% 0 DFS flush period 133 32404 10616 3052 1.75% 6.36% 5.94% 0 ILPM 134 20 117839 0 0.31% 0.29% 0.26% 0 PSE2 UART period 135 0 3 0 0.00% 0.00% 0.00% 0 SM Installer 136 16 2 8000 0.00% 0.00% 0.00% 0 mDNS 137 245.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:55.839: EHWIC ESWGE I2C read error *Nov 21 16:08:55.919: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:55.919: EHWIC ESWGE I2C read error *Nov 21 16:08:55.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at 639 37 0.00% 0.00% 0.00% 0 FHRP Main thread 138 0 1 0 0.00% 0.00% 0.00% 0 VRRP Main thread 139 16 9582 1 0.00% 0.04% 0.02% 0 VRRS Main thread 140 0 2 0 0.00% 0.00% 0.00% 0 IP NAT HA BGND P 141 0 12 0 0.00% 0.00% 0.00% 0 Auth Manager 142 0 1 0 0.00% 0.00% 0.00% 0 AUTH POLICY Fram 143 0 in slot 1 *Nov 21 16:08:56.679: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:56.679: EHWIC ESWGE I2C read error *Nov 21 16:08:56.759: %ESWGE_ov 21 16:08:57.439: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:56.759: EHWIC ESWGE I2C read error *N 2 0 0.00% 0.00% 0.00% 0 Dot1x Mgr Proces 144 0 1 0 0.00% 0.00% 0.00% 0 802.1x Webauth F 145 0 1 0 0.00% 0.00% 0.00% 0 EAP Framework 146 0 2 0 0.00% 0.00% 0.00% 0 CMD HANDLER 147 0 2 0 0.00% 0.00% 0.00% 0 DTP Protocol 148 0 1 0 0.00% 0.00% 0.00% 0 SFF8472 149 0 627 *Nov 21 16:08:57.439: EHWIC ESWGE I2C read error *Nov 21 16:08:57.535: EHWIC ESWGE I2C read error *Nov 21 16:08:57.799: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:08:58.479: %ESWGE_ERR-3-CMDQ_FULL: Co 0 0.00% 0.00% 0.00% 0 PI MATM Aging Pr 150 0 65 0 0.00% 0.00% 0.00% 0 EtherChnl 151 0 2 0 0.00% 0.00% 0.00% 0 call_home_les_oi 152 0 1 0 0.00% 0.00% 0.00% 0 SMI Director DB 153 0 1 0 0.00% 0.00% 0.00% 0 SMI CDP Update H 154 0 1 0 0.00% 0.00% 0.00% 0 SMI Backup Proce 155 0 2 mmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:58.479: EHWIC ESWGE I2C read error *Nov 21 16:08:58.559: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:58.559: EHWIC ESWGE I2C read error *Nov 21 16:08:59.239: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:59.239: E 0 0.00% 0.00% 0.00% 0 RG Faults Timer 156 0 2 0 0.00% 0.00% 0.00% 0 RG Protocol Time 157 0 2 0 0.00% 0.00% 0.00% 0 RG Transport Tim 158 0 1 0 HWIC ESWGE I2C read error 0.00% 0.00% 0.00% 0 RG VP 159 0 2 0 0.00% 0.00% 0.00% 0 RG AR 160 0 6 0 0.00% 0.00% 0.00% 0 DHCP Snooping 161 0 2 0 0.0 *Nov 21 16:08:59.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:59.319: EHWIC ESWGE I2C read error *Nov 21 16:08:59.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:08:59.999: EHWIC ESWGE I2C read error *Nov 21 160% 0.00% 0.00% 0 IP Host Track Pr 162 0 2 0 0.00% 0.00% 0.00% 0 AAA Server 163 0 1 0 0.00% 0.00% 0.00% 0 AAA :09:00.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ACCT Proc 164 4 1 4000 0.00% 0.00% 0.00% 0 ACCT Periodic Pr 165 0 1 0 0.00% 0.00% 0.00% 0 AAA System Acct 166 88 177 497 0.00% 0.00% 0.00% 0 CDP Protocol 168 0 21 0 0.00% 0.0 *Nov 21 16:09:00.079: EHWIC ESWGE I2C read error *Nov 21 16:09:00.159: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:00.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10% 0.00% 0 Call Home Timer 169 0 2 0 0.00% 0.00% 0.00% 0 AAA Dictionary R 170 *Nov 21 16:09:00.839: EHWIC ESWGE I2C read error 0 2 0 0.00% 0.00% 0.00% 0 Ethernet LMI 171 4 2 2000 0.00% 0.00% *Nov 21 16:09:00.919: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10.00% 0 Ethernet OAM Pro 172 0 2 0 0.00% 0.00% 0.00% 0 CEF switching ba 173 0 1 0 0.00% 0.00% 0.00% 0 ADJ NSF process 174 0 1 0 0.00% 0.00% 0.0 *Nov 21 16:09:00.919: EHWIC ESWGE I2C read error *Nov 21 16:09:01.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:01.599: EHWIC ESWGE I2C read error *Nov 21 16:09:01.759: EHWIC ESWGE I2C read error *Nov 21 16:09:01.843: %ESWGE_ERR-3-CMDQ_FULL: Command queue 0% 0 TRACK Main threa 175 0 1 0 0.00% 0.00% 0.00% 0 TRACK Client thr 176 0 2 0 0.00% 0.00% 0.00% 0 ATM OAM Input 177 0 2 0 0.00% 0.00% 0.00% 0 ATM OAM TIMER 178 0 2 0 0.00% 0.00% 0.00% 0 IPAM/ODAP Events 179 16 18917 0 0.07% 0.05% 0.04% 0 IPAM Manager 180 0 2 0 0.00% 0.00% 0.00% 0 is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:02.523: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:02.523: EHWIC ESWGE I2C read error *Nov 21 16:09:02.603: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:02.603: EHWIC ESWGE I2C read error IPAM Events 181 12 13 923 0.00% 0.00% 0.00% 0 IP ARP Adjacency 182 0 1 0 0.00% 0.00% 0.00% 0 IP ARP Retry Age 183 96 561 171 0.00% 0.00% 0.00% 0 IP Input 184 0 17 0 0.00% 0.00% 0.00% 0 ICMP event handl 185 0 3 0 0.00% 0.00% 0.00% 0 PIM register asy 186 0 4 0 0.00% 0.00% 0.00% 0 MOP Pro *Nov 21 16:09:03.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:03.283: EHWIC ESWGE I2C read error *Nov 21 16:09:03.363: EHWIC ESWGE I2C read error *Nov 21 16:09:04.043: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16tocols 187 0 2 0 0.00% 0.00% 0.00% 0 PPP SIP 188 0 2 0 0.00% 0.00% 0.00% 0 PPP Bind 189 0 2 0 0.00% 0.00% 0.00% 0 PPP IP Route 190 0 1 0 0.00% 0.00% 0.00% 0 HQF TARGET DYNAM 192 0 2 0 0.00% 0.00% 0.00% 0 RIB LM VALIDATE 193 0 1 0 0.00% 0.00% 0.00% 0 SSS Manager :09:04.043: EHWIC ESWGE I2C read error *Nov 21 16:09:04.123: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:04.123: EHWIC ESWGE I2C read error *Nov 21 16:09:04.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:04.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 194 0 1 0 0.00% 0.00% 0.00% 0 SSS Policy Manag 195 0 1 0 0.00% 0.00% 0.00% 0 SSS Feature Mana 196 4 at in slot 1 2543 1 0.00% 0.00% 0.00% 0 SSS Feature Time 197 580 838 692 0.00% 0.01% 0.04% 0 *Nov 21 16:09:04.883: EHWIC ESWGE I2C read error Spanning Tree 198 0 2 0 0.00% 0.00% 0.00% 0 SSM connection m 199 0 1 0 0.00% 0.00% 0.00% 0 WAAS Process 2 *Nov 21 16:09:04.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:04.963: EHWIC ESWGE I2C read error *Nov 21 16:09:05.643: EHWIC ESWGE I2C read error *Nov 21 16:09:05.759: EHWIC ESWGE I2C read error *Nov 21 16:09:05.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is00 0 1 0 0.00% 0.00% 0.00% 0 X.25 Encaps Mana 201 0 1 0 0.00% 0.00% 0.00% 0 IPv6 ping proces 202 0 2 0 0.00% 0.00% 0.00% 0 Ethernet CFM 203 8 3983 2 0.00% 0.00% 0.00% 0 Ethernet Timer C 204 32 76491 0 0.16% 0.21% 0.19% 0 Ethernet Msec Ti 205 0 2 0 0.00% 0.00% 0.00% 0 Ethernet CFM PAL 206 Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:06.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:06.519: EHWIC ESWGE I2C read error *Nov 21 16:09:06.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:06.599: EHWIC ESWGE I2C read error *Nov 21 16:09:07.279: %ESWGE_ERR-3- 0 1 0 0.00% 0.00% 0.00% 0 Auth-proxy AAA B 207 0 220 0 0.00% 0.00% CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0.00% 0 Auth-proxy HTTP 208 0 1 0 0.00% 0.00% 0.00% 0 IP Admin SM Proc 209 0 2 0 0.00% 0.00% 0.00% 0 EAPoUDP Process 210 0 2 0 0.00% 0.00% 0.00% 0 KRB5 AAA 211 0 12 0 0.00% 0.00% 0.00% 0 FRR Background P 212 4 *Nov 21 16:09:07.279: EHWIC ESWGE I2C read error *Nov 21 16:09:07.359: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:07.359: EHWIC ESWGE I2C read error *Nov 21 16:09:08.039: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: 59 67 0.00% 0.00% 0.00% 0 CEF background p 213 0 1 0 0.00% 0.00% 0.00% 0 fib_fib_bfd_sb e 214 0 1 0 0.00% 0.00% 0.00% 0 Tunnel FIB 215 0 2 0 0.00% 0.00% 0.00% 0 HQF Output Shape 216 0 2 0 0.00% 0.00% 0.00% 0 HQF Input Shaper 217 0 2 0 0.00% 0.00% 0.00% 0 IPMUXv4 218 0 09:08.039: EHWIC ESWGE I2C read error *Nov 21 16:09:08.119: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:08.119: EHWIC ESWGE I2C read error *Nov 21 16:09:08.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:09.043: % 2 0 0.00% 0.00% 0.00% 0 IPMUXv6 219 0 1 0 0.00% 0.00% 0.00% 0 IPC UDP Input 220 8 329 24 0.00% 0.00% 0.00% 0 CEF: IPv4 proces 221 20 648 30 0.00% 0.00% 0.00% 0 ADJ background 222 0 3 0 0.00% 0.00% 0.00% 0 Collection proce 223 0 1 0 0.00% 0.00% 0.00% 0 Socket Timers 224 0 1 ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:09.043: EHWIC ESWGE I2C read error *Nov 21 16:09:09.123: EHWIC ESWGE I2C read error *Nov 21 16:09:09.803: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:09.803: EHWIC ESWGE I2C read error *Nov 21 16:09:09.883: %ESWGE_ERR-3-CMDQ_FULL: C 0 0.00% 0.00% 0.00% 0 Critical Auth 225 0 2 0 0.00% 0.00% 0.00% 0 Dot1x Supplicant 226 0 2 0 0.00% 0.00% 0.00% 0 Dot1x Supplicant 227 0 2 ommand queue is Full, I2C cmd Read fail at in slot 1 0 0.00% 0.00% 0.00% 0 Dot1x Supplicant 228 28 16 1750 0.00% 0.00% 0.00% 0 L2MM 229 4 65 61 0.00% 0.00% 0.00% 0 MRD 230 0 6 *Nov 21 16:09:09.883: EHWIC ESWGE I2C read error *Nov 21 16:09:09.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:10.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:10.739: EHWIC ESWGE I2C read error *Nov 21 16 0 0.00% 0.00% 0.00% 0 IGMPSN 231 0 2 0 0.00% 0.00% 0.00% 0 L2X Switching Ev 232 0 1 0 0.00% 0.00% 0.00% :09:10.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10 MAB Framework 233 0 2 0 0.00% 0.00% 0.00% 0 RG Media Timer 234 0 1 0 0.00% 0.00% 0.00% 0 RG If-Mgr Timer 235 0 2 0 0.00% 0.00% 0.00% 0 Routing Topology 236 0 8 0 0.0 *Nov 21 16:09:10.819: EHWIC ESWGE I2C read error *Nov 21 16:09:11.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:11.499: EHWIC ESWGE I2C read error *Nov 21 16:09:11.723: EHWIC ESWGE I2C read error 0% 0.00% 0.00% 0 IP RIB Update 237 4 26 153 0.00% 0.00% 0.00% 0 IP Background 238 0 38 0 0.00% 0.00% 0.00% 0 IP Connected Rou 239 0 1 0 0.00% 0.00% 0.00% 0 IP Traceroute 240 0 3 0 0.00% 0.00% 0.00% 0 Service Routing 241 8 14 571 0.00% 0.00% 0.00% 0 SR CapMan Proces 242 0 9 0 0.00% 0.0 *Nov 21 16:09:12.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:12.403: EHWIC ESWGE I2C read error *Nov 21 16:09:12.587: EHWIC ESWGE I2C read error *Nov 21 16:09:12.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:13.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm0% 0.00% 0 SNMP Timers 243 4 2 2000 0.00% 0.00% 0.00% 0 SCTP Main Proces 244 4 226 17 0.00% 0.00% 0.00% 0 TCP Timer 245 0 29 0 0.00% 0.00% 0.00% 0 TCP Protocols 246 0 5 0 0.00% 0.00% 0.00% 0 HTTP CORE 247 0 1 0 0.00% 0.00% 0.00% 0 IUA Main Process 248 0 643 0 0.00% 0.00% 0.0d Read fail at in slot 1 *Nov 21 16:09:13.531: EHWIC ESWGE I2C read error *Nov 21 16:09:13.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:1at in slot 13.611: EHWIC ESWGE I2C read error *Nov 21 16:09:14.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 0% 0 RUDPV1 Main Proc 249 0 1 0 0.00% 0.00% 0.00% 0 bsm_timers 250 0 658 0 0.00% 0.00% 0.00% 0 bsm_xmt_proc 251 0 7 0 0.00% 0.00% 0.00% 0 Flow Exporter Ti 252 0 2 0 0.00% 0.00% 0.00% 0 PPP Compress Inp 253 0 2 0 0.00% 0.00% 0.00% 0 PPP Compress Res 254 0 1 0 0.00% 0.00% 0.00% 0 *Nov 21 16:09:14.291: EHWIC ESWGE I2C read error *Nov 21 16:09:14.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:14.371: EHWIC ESWGE I2C read error *Nov 21 16:09:14.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:15.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmCOPS 255 0 2 0 0.00% 0.00% 0.00% 0 Dialer Forwarder 256 0 3 0 0.00% 0.00% 0.00% 0 ADJ resolve proc 258 0 3 0 0.00% 0.00% 0.00% 0 MFIBd Read fail at in slot 1 Master back 259 0 11 0 0.00% 0.00% 0.00% 0 MVPN Mgr Process 260 0 2 0 0.00% 0.00% 0.00% 0 Multicast Offloa 261 0 1 0 0.00% 0.00% 0.00% 0 RARP In *Nov 21 16:09:15.175: EHWIC ESWGE I2C read error *Nov 21 16:09:15.255: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:15.255: EHWIC ESWGE I2C read error *Nov 21 16:09:15.935: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16put 262 0 4 0 0.00% 0.00% 0.00% 0 static 263 0 2 0 0.00% 0.00% 0.00% 0 App Route Proces 264 0 1 0 0.00% 0.00% 0.00% 0 IPv6 RIB Clea:09:15.935: EHWIC ESWGE I2C read error nup 265 0 3 0 0.00% 0.00% 0.00% 0 IPv6 RIB Event H 266 0 1 0 0.00% 0.00% 0.00% 0 IP IRDP 267 0 1 0 0.00% 0.00% 0.00% 0 LAPB Process *Nov 21 16:09:16.015: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:16.015: EHWIC ESWGE I2C read error *Nov 21 16:09:16.711: EHWIC ESWGE I2C read error *Nov 21 16:09:16.919: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0 268 0 1 0 0.00% 0.00% 0.00% 0 PAD InCall 269 0 2 0 0.00% 0.00% 0.00% 0 X.25 Background 270 0 63 0 0.00% 0.00% 0.00% 0 QoS stats proces 271 0 1 0 0.00% 0.00% 0.00% 0 VPDN call manage 272 4 70 57 0.00% 0.00% 0.00% 0 DHCPD Receive 273 0 1 0 0.00% 0.00% 0.00% 0 IPv6 Static Hand 29:16.919: EHWIC ESWGE I2C read error *Nov 21 16:09:17.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:17.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:17.699: EHWIC ESWGE I2C read error *Nov 21 16:09:17.779: EHWIDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1C ESWGE I2C read error *Nov 21 16:09:18.459: %ESWGE_ERR-3-CM74 0 1 0 0.00% 0.00% 0.00% 0 Ethernet Datapla 275 0 1 0 0.00% 0.00% 0.00% 0 Ethernet PM Proc 276 0 2 0 0.00% 0.00% 0.00% 0 Ethernet PM Soft 277 0 201 0 0.07% 0.00% 0.00% 0 Ethernet PM Moni 278 0 2 0 0.00% 0.00% 0.00% 0 RLM groups Proce 279 0 2 0 0.00% 0.00% 0.00% 0 PPP NBF 280 *Nov 21 16:09:18.459: EHWIC ESWGE I2C read error *Nov 21 16:09:18.539: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:18.539: EHWIC ESWGE I2C read error *Nov 21 16:09:18.755: %ESWGE_ERR-3-CMDQ_FULL: Comman 4 2 2000 0.00% 0.00% 0.00% 0 Border Element p 281 0 3 0 0.00% 0.00% 0.00% 0 gk process 282 0 2 0 0.00% 0.00% 0.00% 0 SDEE Management 283 0 1262 0 0.00% 0.00% 0.00% 0 Inspect process 285 0 45 0 0.00% 0.00% 0.00% 0 FW DP Inspect pr 286 4 1262 3 0.00% 0.00% 0.00% 0 CCE DP URLF cach 287 0d queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:1WGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 19.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:19.435: EHWIC ESWGE I2C read error *Nov 21 16:09:19.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:19.515: EHWIC ESWGE I2C read error *Nov 21 16:09:20.195: %ES 2 0 0.00% 0.00% 0.00% 0 URL filter proc 288 0 1 0 0.00% 0.00% 0.00% 0 IPS Process 289 0 2 0 0.00% 0.00% 0.00% 0 IPS Auto Update 290 0 1 0 0.00% 0.00% 0.00% 0 Select Timers 291 28 2 14000 0.00% 0.00% 0.00% 0 HTTP Process 292 0 2 0 0.00% 0.00% 0.00% 0 CIFS API Process 293 0 *Nov 21 16:09:20.195: EHWIC ESWGE I2C read error *Nov 21 16:09:20.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:20.275: EHWIC ESWGE I2C read error *Nov 21 16:09:20.955: %ESWGE_ERR-3-CMDQ_FULL: Co 2 0 0.00% 0.00% 0.00% 0 CIFS Proxy Proce 294 0 3 0 0.00% 0.00% 0.00% 0 Crypto HW Proc 295 0 1 0 0.00% mmand queue is Full, I2C cmd Read fail at in slot 1 0.00% 0.00% 0 IPv6 Inspect Tim 296 0 1 0 0.00% 0.00% 0.00% 0 IPSECv6 PS Proc 297 *Nov 21 16:09:20.955: EHWIC ESWGE I2C read error 0 29 0 0.00% 0.00% 0.00% 0 CRM_CALL_UPDATE_ 299 0 2 0 0.00% 0.00% 0.00% 0 AAA Cached Serve 300 0 2 *Nov 21 16:09:21.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:21.035: EHWIC ESWGE I2C read error *Nov 21 16:09:21.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:21.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is 0 0.00% 0.00% 0.00% 0 ENABLE AAA 301 0 1 0 0.00% 0.00% 0.00% 0 EM Background Pr 302 0 1 0 0.00% 0.00% Full, I2C cmd Read fail at in slot 1 0.00% 0 IDMGR CORE 303 0 1 0 0.00% 0.00% 0.00% 0 Key chain liveke 304 *Nov 21 16:09:21.891: EHWIC ESWGE I2C read error 0 2 0 0.00% 0.00% 0.00% 0 LINE AAA 305 0 3 0 0.00% 0.00% 0.00% 0 LOCAL AAA 306 0 2 *Nov 21 16:09:21.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:21.971: EHWIC ESWGE I2C read error *Nov 21 16:09:22.651: EHWIC ESWGE I2C read error *Nov 21 16:09:22.875: EHWIC ESWGE I2C read error *Nov 21 16:09:22.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue 0 0.00% 0.00% 0.00% 0 TPLUS 307 260 5 52000 0.00% 0.00% 0.00% 0 NIST rng proc 308 0 3 0 0.00% 0.00% 0.00% 0 LDAP process 309 0 3 0 0.00% 0.00% 0.00% 0 Crypto WUI 310 28 9987 2 0.00% 0.04% 0.02% 0 MMA DB TIMER 311 0 2 0 0.00% 0.00% 0.00% 0 STUN_APP 312 0 1 0 0.0is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:23.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:23.635: EHWIC ESWGE I2C read error *Nov 21 16:09:23.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:23.715: EHWIC ESWGE I2C read error *Nov 21 16:09:24.395: %ESWGE_ERR-0% 0.00% 0.00% 0 STUN_TEST 313 0 2 0 0.00% 0.00% 0.00% 0 VSP_MGR 314 0 1 0 0.00% 0.00% 0.00% 0 EAP Process 315 0 1 0 0.00% 0.00% 0.00% 0 FW_TEST_TRP 316 0 1272 0 0.00% 0.00% 0.00% 0 Timer Library 317 0 2 0 0.00% 0.00% 0.00% 0 Crypto Support 318 0 1 0 0.00% 0.03-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:24.395: EHWIC ESWGE I2C read error *Nov 21 16:09:24.475: EHWIC ESWGE I2C read error *Nov 21 16:09:25.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:25.155: EHWIC ESWGE I2C read error *Nov 21 16:09:25.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue0% 0.00% 0 EPM MAIN PROCESS 319 0 662 0 0.00% 0.00% 0.00% 0 RSCMSM VOLUME MO 320 0 2 0 0.00% 0.00% 0.00% 0 CSDB Timer proce 321 0 3 0 0.00% 0.00% 0.00% 0 crypto engine pr 322 0 1 0 0.00% 0.00% 0.00% 0 RSA background p 323 56 4 14000 0.00% 0.00% 0.00% 0 Crypto CA 324 0 1 0 0.00% 0.00% 0.0 is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:25.235: EHWIC ESWGE I2C read error *Nov 21 16:09:25.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:26.067: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:26.067:0% 0 Crypto PKI-CRL 325 0 1 0 0.00% 0.00% 0.00% 0 encrypt proc 326 8 10033 0 0.07% 0.04% 0.03% 0 MMA DP TIMER 327 32 567 56 0.00% 0.00% 0.00% EHWIC ESWGE I2C read error 0 FLEX DSPRM MAIN 328 0 248 0 0.07% 0.00% 0.00% 0 FLEX DSP KEEPALI 329 20 408 49 0.00% 0.00% 0.00% 0 CCVPM_HTSP 330 0 2 0 0.00% 0.00% 0.00% 0 *Nov 21 16:09:26.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:26.147: EHWIC ESWGE I2C read error *Nov 21 16:09:26.879: EHWIC ESWGE I2C read error *Nov 21 16:09:26.959: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:26.959: EHWIC ESWGE I2C read error *Nov 21 16:09:27.039: VPM_MWI_BACKGROU 331 0 3 0 0.00% 0.00% 0.00% 0 VPM_CABLE_STAT_P 332 0 1 0 0.00% 0.00% 0.00% 0 VPM_CONN_CHK_BAC 333 0 1 0 0.00% 0.00% 0.00% 0 CCVPM_R2 334 0 8 0 0.00% 0.00% 0.00% 0 IP TRUST Registe 335 0 1 0 0.00% 0.00% 0.00% 0 EPHONE MWI Refre 336 0 1 0 0.00% 0.00% 0.00% 0 FB/KS L%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:27.719: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:27.719: EHWIC ESWGE I2C read error *Nov 21 16:09:27.879: EHWIC ESWGE I2C read error *Nov 21 16:09:28.559: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1og HouseK 337 0 2 0 0.00% 0.00% 0.00% 0 EPHONE MWI BG Pr 338 0 1 0 0.00% 0.00% 0.00% 0 Skinny HW confer 339 0 2 0 0.00% 0.00% 0.00% 0 CTI Front End Pr 340 0 2 0 0.00% 0.00% 0.00% 0 CTI Call Control 341 0 2 0 0.00% 0.00% 0.00% 0 CTI Line Monitor 342 0 1 0 0.00% 0.00% 0.00% 0 CME CTI Device *Nov 21 16:09:28.559: EHWIC ESWGE I2C read error *Nov 21 16:09:28.639: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:28.639: EHWIC ESWGE I2C read error *Nov 21 16:09:29.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 M 343 0 24 0 0.00% 0.00% 0.00% 0 VOICE REG BG Pro 344 0 668 0 0.00% 0.00% 0.00% 0 CME Extension Mo 345 0 1 0 0.00% 0.00% 0.00% 0 Presence Process 346 0 1 0 0.00% 0.00% 0.00% 0 DS0 PCM Capture 347 0 2 0 0.00% 0.00% 0.00% 0 Sip MPA 349 0 1 0 0.00% 0.00% 0.00% 0 http client proc 3:09:29.319: EHWIC ESWGE I2C read error *Nov 21 16:09:29.399: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:29.399: EHWIC ESWGE I2C read error *Nov 21 16:09:29.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:30.247: 51 0 1 0 0.00% 0.00% 0.00% 0 QOS_MODULE_MAIN 352 0 1 0 0.00% 0.00% 0.00% 0 RPMS_PROC_MAIN 353 0 1 0 0.00% 0.00% 0.00% 0 VoIP AAA 354 %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 2 0 0.00% 0.00% 0.00% 0 Dialog Manager 355 0 1 0 0.00% 0.00% 0.00% 0 VOIP_FMD_MAIN 356 12 679 17 0.00% 0.00% 0.00% 0 Crypto IKEv2 357 *Nov 21 16:09:30.247: EHWIC ESWGE I2C read error *Nov 21 16:09:30.327: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:30.327: EHWIC ESWGE I2C read error *Nov 21 16:09:31.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 0 1 0 0.00% 0.00% 0.00% 0 IKEv2 AAA handle 358 0 3 0 0.00% 0.00% 0.00% 0 CRYPTO MAP FREE 359 0 1 0 0.00% 0.00% 0.00% 0 Crypto INT 360 :09:31.007: EHWIC ESWGE I2C read error 0 4 0 0.00% 0.00% 0.00% 0 Crypto IKE Dispa 361 16 111 144 0.00% 0.00% 0.00% 0 Crypto IKMP 362 0 1 0 0.00% 0.00% 0.00% 0 IPSEC manual key 363 8 *Nov 21 16:09:31.087: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:31.087: EHWIC ESWGE I2C read error *Nov 21 16:09:31.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:31.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is 66 121 0.00% 0.00% 0.00% 0 IPSEC key engine 364 0 2 0 0.00% 0.00% 0.00%Full, I2C cmd Read fail at in slot 1 0 CRYPTO QoS proce 365 4 3 1333 0.00% 0.00% 0.00% 0 Crypto ACL 366 0 *Nov 21 16:09:31.951: EHWIC ESWGE I2C read error 1 0 0.00% 0.00% 0.00% 0 Crypto PAS Proc 367 0 3 0 0.00% 0.00% 0.00% 0 IPSec background 368 0 2 0 0.00% 0.00% 0.00% 0 GKM GM Process 369 0 *Nov 21 16:09:32.031: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:32.031: EHWIC ESWGE I2C read error *Nov 21 16:09:32.791: EHWIC ESWGE I2C read error *Nov 21 16:09:32.999: %ESWGE_ERR-3-CMDQ_FULL: Co 1 0 0.00% 0.00% 0.00% 0 GKM KS PROCESS 370 0 685 0 0.00% 0.00% 0.00% 0 Crypto Device Up 371 4 2 2000 0.00% 0.00% 0.00% 0 Multi-ISA Event 372 0 1 0 0.00% 0.00% 0.00% 0 Multi-ISA Cleanu 373 0 1 0 0.00% 0.00% 0.00% 0 crypto raw delet 374 0 1 0 0.00% 0.00% 0.00% 0 Licensing MIB pr 375 0 2 mmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:32.999: EHWIC ESWGE I2C read error *Nov 21 16:09:33.679: EHWIC ESWGE I2C read error *Nov 21 16:09:33.847: EHWIC ESWGE I2C read error *Nov 21 16:09:34.055: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:34.735: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2 0 0.00% 0.00% 0.00% 0 Control-plane ho 376 8 827 9 0.00% 0.00% 0.00% 0 PM Callback 377 0 55 0 0.00% 0.00% 0.00% 0 dhcp snooping sw 379 0 3 0 0.00% 0.00% 0.00% 0 AAA SEND STOP EV 380 0 1 0 0.00% 0.00% 0.00% 0 Test AAA Client 381 0 1 0 0.00% 0.00% 0.00% 0 dcm_cli_engine 382 0 3 C cmd Read fail at in slot 1 *Nov 21 16:09:34.735: EHWIC ESWGE I2C read error *Nov 21 16:09:34.815: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:34.815: EHWIC ESWGE I2C read error *Nov 21 16:09:35.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:35.495: EHWIC ESWGE I2C read err 0 0.00% 0.00% 0.00% 0 dcm_cli_provider 383 4 5 800 0.00% 0.00% 0.00% 0 DCM Core Thread 384 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Routing 385 0 1332 0 0.00% 0.00% 0.00% 0 EEM ED Syslog 386 4 4 1000 0.00% 0.00% 0.00% 0 EEM ED Generic 387 0 4 0 0.00% 0.00% 0.00% 0 EEM ED NHRP 388 4 4 1000 0.0or *Nov 21 16:09:35.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:35.575: EHWIC ESWGE I2C read error *Nov 21 16:09:35.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:36.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue0% 0.00% 0.00% 0 EEM ED Track 389 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Resource 390 0 69 0 0.00% 0.00% 0.00% 0 RMO is Full, I2C cmd Read fail at in slot 1N Recycle Pro 391 0 2 0 0.00% 0.00% 0.00% 0 RMON Deferred Se 392 0 1 *Nov 21 16:09:36.335: EHWIC ESWGE I2C read error 0 0.00% 0.00% 0.00% 0 Syslog Traps 393 0 1 0 0.00% 0.00% 0.00% 0 WAN Optimization 394 0 1 0 0.00% 0.0 *Nov 21 16:09:36.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:36.415: EHWIC ESWGE I2C read error *Nov 21 16:09:37.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:37.095: EHWIC ESWGE I2C read error *Nov 21 160% 0.00% 0 IKEv2 Cluster Lo 395 0 1 0 0.00% 0.00% 0.00% 0 IKEv2 FlexVPN Pr 396 0 22 0 0.00% 0.00% 0.00% 0 Crypto cTCP proc 398 40 2 20000 0.00% 0.00% 0.00% 0 VLAN Manager 399 0 14 0 0.00% 0.00% 0.00% 0 DHCPD Timer 400 0 4 0 0.00% 0.00% 0.00% 0 RBM CORE 401 0 3 0 0.00% 0.00% 0.0:09:37.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:37.175: EHWIC ESWGE I2C read error *Nov 21 16:09:37.855: EHWIC ESWGE I2C read error *Nov 21 16:09:37.975: EHWIC ESWGE I2C read error *Nov 21 16:09:38.055: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:38.735: %ESWGE_ERR-3-0% 0 CTS credentials 402 8 159 50 0.00% 0.00% 0.00% 0 EEM Server 403 12 25 480 0.00% 0.00% 0.00% 0 Call Home proces 404 0 1 0 0.00% 0.00% 0.00% 0 Call Home DS 405 0 1 0 0.00% 0.00% 0.00% 0 Call Home DSfile 406 0 6 0 0.00% 0.00% 0.00% 0 DCM snmp dp Thre 407 0 3 0 0.00% 0.00% 0.00% 0 CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:38.735: EHWIC ESWGE I2C read error *Nov 21 16:09:38.815: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:38.815: EHWIC ESWGE I2C read error *Nov 21 16:09:39.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16snmp dcm ma shim 408 24 71 338 0.00% 0.00% 0.00% 0 Bulkstat-Client 409 4 3 1333 0.00% 0.00% 0.00% 0 dcm_expression_p 410 0 3 0 0.00% 0.00% 0.00% 0 EEM Policy Direc 411 0 2 0 0.00% 0.00% 0.00% 0 TGRM Preempt 412 0 4 0 0.00% 0.00% 0.00% 0 EEM ED CLI 413 0 4 0 0.00% 0.00% 0.00% 0 EEM ED :09:39.495: EHWIC ESWGE I2C read error *Nov 21 16:09:39.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:39.575: EHWIC ESWGE I2C read error *Nov 21 16:09:39.735: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:40.415: Counter 414 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Interface 415 0 4 0 0.00% 0.00% 0.00% 0 EEM ED IOSWD 416 0 4 0 0.00% 0.00% 0.00% 0 EEM ED None%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 417 0 4 0 0.00% 0.00% 0.00% 0 EEM ED OIR 418 0 9 0 0.00% 0.00% 0.00% 0 EEM ED RF 419 0 4 0 0.00% 0.00% 0.00% 0 EEM ED SNMP *Nov 21 16:09:40.415: EHWIC ESWGE I2C read error *Nov 21 16:09:40.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:40.495: EHWIC ESWGE I2C read error *Nov 21 16:09:41.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 420 0 4 0 0.00% 0.00% 0.00% 0 EEM ED SNMP Obje 421 0 4 0 0.00% 0.00% 0.00% 0 EEM ED SNMP Noti :09:41.175: EHWIC ESWGE I2C read error0 0.00% 0.00% 0.00% 0 EEM ED Timer 423 4 4 1000 0.00% 0.00% 0.00% 0 EEM ED Test 424 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Config 425 4 4 1000 0.00% 0.00% 0.00% 0 EEM ED Env 4 *Nov 21 16:09:41.255: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:41.255: EHWIC ESWGE I2C read error *Nov 21 16:09:42.023: EHWIC ESWGE I2C read error *Nov 21 16:09:42.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1626 0 4 0 0.00% 0.00% 0.00% 0 EEM ED DS 427 0 4 0 0.00% 0.00% 0.00% 0 EEM ED CRASH 428 0 669 0 0.00% 0.00% 0.00% 0 CFT Timer Proces 429 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Nf 430 40 1039 38 0.00% 0.03% 0.02% 0 Syslog 432 0 4 0 0.00% 0.00% 0.00% 0 EEM ED RPC 433 :09:42.103: EHWIC ESWGE I2C read error *Nov 21 16:09:42.183: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:42.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:42.863: EHWIC ESWGE I2C read error *Nov 21 16:09:43.023: EH-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1WIC ESWGE I2C read error *Nov 21 16:09:43.703: %ESWGE_ERR-3 0 4 0 0.00% 0.00% 0.00% 0 EEM ED Ipsla 434 0 1 0 0.00% 0.00% 0.00% 0 IP SLAs Ethernet 435 4 669 5 0.00% 0.00% 0.00% 0 trunk conditioni 436 0 1 0 0.00% 0.00% 0.00% 0 trunk conditioni 437 0 140 0 0.00% 0.00% 0.00% 0 VDC process 438 0 1 0 0.00% 0.00% 0.00% 0 tHUB 439 12 *Nov 21 16:09:43.703: EHWIC ESWGE I2C read error *Nov 21 16:09:43.871: EHWIC ESWGE I2C read error *Nov 21 16:09:44.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:44.759: %ESWGE_ERR-3-CMDQ_FULL: Comma 2723 4 0.00% 0.00% 0.00% 0 MLD 440 0 43 0 0.00% 0.00% 0.00% 0 mdns Timer Proce 441 0 2 0 0.00% 0.00% 0.00% 0 MRIB Process 442 0 2 0 0.00% 0.00% 0.00% 0 Key Proc 443 4 692 5 0.00% 0.00% 0.00% 0 TRP_PSEUDOTIMER 444 0 4 0 0.00% 0.00% 0.00% 0 Resource Monitor 445 0 nd queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:44.759: EHWIC ESWGE I2C read error *Nov 21 16:09:44.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:44.839: EHWIC ESWGE I2C read error *Nov 21 16:09:45.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:45.519: EHWIC E 2 0 0.00% 0.00% 0.00% 0 Resource Availab 446 0 3 0 0.00% 0.00% 0.00% 0 TRPAPP 447 4 13 307 0.00% 0.00% 0.00% 0 CC-API_VCM 448 4 2SWGE I2C read error 2000 0.00% 0.00% 0.00% 0 VOIP_RTCP 449 0 2 0 0.00% 0.00% 0.00% 0 confmsp 450 4 4 1000 0.00% 0.00% 0.00% 0 Session Applicat 451 32 62 *Nov 21 16:09:45.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:45.599: EHWIC ESWGE I2C read error *Nov 21 16:09:46.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:46.279: EHWIC ESWGE I2C read error *Nov 21 16:0 516 0.00% 0.00% 0.00% 0 DSMP 452 4 70 57 0.00% 0.00% 0.00% 0 VTSP 453 0 1 0 0.00% 0.00% 09:46.359: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1.00% 0 TSP 454 0 2 0 0.00% 0.00% 0.00% 0 swmtp_msp 455 0 2 0 0.00% 0.00% 0.00% 0 RECMSPAPP 456 0 1 0 0.00% 0.00% 0.00% 0 lib_off_app 457 0 1 *Nov 21 16:09:46.359: EHWIC ESWGE I2C read error *Nov 21 16:09:46.439: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 0 0.00% 0.00% 0.00% 0 Media Record Command queue is Full, I2C cmd Read fail at in slot 1 458 0 2 0 0.00% 0.00% 0.00% 0 Voice Player *Nov 21 16:09:47.119: EHWIC ESWGE I2C read error 459 0 1 0 0.00% 0.00% 0.00% 0 Resource Measure 460 0 2 0 *Nov 21 16:09:47.199: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10.00% 0.00% 0.00% 0 vxcmsp 461 0 2 0 0.00% 0.00% 0.00% 0 Synthetic Video 462 0 2 0 0.00% 0.00% 0.00% 0 VOICE_HA_ACTIVE 463 0 2 0 0.0 *Nov 21 16:09:47.199: EHWIC ESWGE I2C read error *Nov 21 16:09:47.935: EHWIC ESWGE I2C read error *Nov 21 16:09:48.143: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:48.143: EHWIC ESWGE I2C read error0% 0.00% 0.00% 0 VOICE_HA_STANDBY 464 0 2 0 0.00% 0.00% 0.00% 0 Voip HA Session 465 0 11 0 0.00% 0.00% 0.00% 0 EEM Helper Threa 466 0 71 0 0.00% 0.00% 0.00% 0 NHRP 467 8 73 109 0.00% 0.00% 0.00% 0 CCH323_CT 468 0 1 0 0.00% 0.00% 0.00% 0 CCH323_DNS 469 4 2 2000 0.00% 0.0 *Nov 21 16:09:48.223: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:48.903: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:48.903: EHWIC ESWGE I2C read error *Nov 21 16:09:48.983: EHWIC ESWGE I2C read error *Nov 21 16:09:49.663: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10% 0.00% 0 CCSIP_SPI_CONTRO 470 0 1 0 0.00% 0.00% 0.00% 0 CCSIP_DNS 471 0 2 0 0.00% 0.00% 0.00% 0 CCSIP_UDP_SOCKET 472 4 2 2000 0.00% 0.00% 0.00% 0 CCSIP_TCP_SOCKET 473 0 11 0 0.00% 0.00% 0.00% 0 CCSIP_TLS_SOCKET 474 0 12 0 0.00% 0.00% 0.00% 0 RTPSPI 475 0 2 0 0.00% 0.00% 0.0 *Nov 21 16:09:49.663: EHWIC ESWGE I2C read error *Nov 21 16:09:49.743: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:49.743: EHWIC ESWGE I2C read error *Nov 21 16:09:50.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0% 0 Multicast Replic 476 0 12 0 0.00% 0.00% 0.00% 0 Tunnel Security 477 0 4 0 0.00% 0.00% 0.00% 0 Crypto SS Proces 480 0 2 0 0.00% 0.00% 0.00% 0 IP SNMP 481 0 1 0 0.00% 0.00% 0.00% 0 PDU DISPATCHER 482 40 2 20000 0.00% 0.00% 0.00% 0 SNMP ENGINE 483 0 2 0 0.00% 0.00% 0.00% 0 09:50.423: EHWIC ESWGE I2C read error *Nov 21 16:09:50.503: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:50.503: EHWIC ESWGE I2C read error *Nov 21 16:09:50.583: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:51.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read failIP SNMPV6 484 0 1 0 0.00% 0.00% 0.00% 0 SNMP ConfCopyPro 485 0 2 0 0.00% 0.00% 0.00% 0 SNMP Traps 486 at in slot 1 0 3 0 0.00% 0.00% 0.00% 0 SCCP Application 487 0 2 0 0.00% 0. *Nov 21 16:09:51.263: EHWIC ESWGE I2C read error 00% 0.00% 0 Skinny MOH Event 488 660 103 6407 0.00% 0.00% 0.00% 0 Skinny Socket Se 489 0 4 0 0.00% 0.00% 0.00% 0 Web Wri *Nov 21 16:09:51.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:51.343: EHWIC ESWGE I2C read error *Nov 21 16:09:52.119: EHWIC ESWGE I2C read error *Nov 21 16:09:52.199: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:52.199: EHWIC ESWGE I2C read error *Nov 21 16:09:52.279: %te Housek 490 8 691 11 0.00% 0.00% 0.00% 0 NTP 491 0 12 0 0.00% 0.00% 0.00% 0 DHCPD Database 492 12 683 17 0.00% 0.00% 0.00% 0 OSPF-100 Router 493 0 315 0 0.00% 0.00% 0.00% 0 OSPF-100 Hello ------------------ show process cpu history ------------------ South-Silk-Gallery-RTR1 09:10:03 PM Friday Nov 21 2014 PST ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:52.959: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:52.959: EHWIC ESWGE I2C read error *Nov 21 16:09:53.115: EHWIC ESWGE I2C read error *Nov 21 16:09:53.795: %ESWGE_ERR-3 -CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 111 11111 11111 11111 000888885555500000444446666666666777777777722222777773333355 100 90 80 *Nov 21 16:09:53.795: EHWIC ESWGE I2C read error *Nov 21 16:09:53.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:53.875: EHWIC ESWGE I2C read error *Nov 21 16:09:54.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 70 60 50 40 30 20 ***** 10 ****************** ****************************** ** 0....5....1....1....2....:09:54.555: EHWIC ESWGE I2C read error *Nov 21 16:09:54.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:54.635: EHWIC ESWGE I2C read error *Nov 21 16:09:54.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:55.487:2....3....3....4....4....5....5....6 0 5 0 5 0 5 0 5 0 5 0 CPU% per second (last 60 seconds) %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 1 581 2 14 29328807850 100 *Nov 21 16:09:55.487: EHWIC ESWGE I2C read error *Nov 21 16:09:55.567: EHWIC ESWGE I2C read error *Nov 21 16:09:56.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:56.247: EHWIC ESWGE I2C read error *Nov 21 16:09:56.327: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:56.327: 90 80 * 70 * EHWIC ESWGE I2C read error 60 * 50 ** 40 ** * 30 ** * *Nov 21 16:09:56.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:57.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:57.111: EHWIC ESWGE I2C read error *Nov 21 16:09:57.191: %ESWGE_ERR-3-CMDQ_FULL: Command queue is 20 ##* * ** 10 #####*#***# Full, I2C cmd Read fail at in slot 1 0....5....1....1....2....2....3....3....4....4....5....5....6 0 5 0 5 *Nov 21 16:09:57.191: EHWIC ESWGE I2C read error 0 5 0 5 0 5 0 CPU% per minute (last 60 minutes) * = maximum CPU% # = average CPU% *Nov 21 16:09:57.871: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:57.871: EHWIC ESWGE I2C read error *Nov 21 16:09:58.091: EHWIC ESWGE I2C read error *Nov 21 16:09:58.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: 100 90 80 09:58.771: EHWIC ESWGE I2C read error *Nov 21 16:09:58.959: EHWIC ESWGE I2C read error *Nov 21 16:09:59.223: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:09:59.903: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:59.903: E 70 60 50 40 30 20 10 HWIC ESWGE I2C read error *Nov 21 16:09:59.983: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:09:59.983: EHWIC ESWGE I2C read error *Nov 21 16:10:00.663: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:00.663: EHWIC ESWGE I2C read error *Nov 21 16:10:00.743: %ESWGE_ERR-3-CMDQ_FULL: C 0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.. 0 5 0 5 0 5 0 5 0 5 0 5 0 CPU% per hour (last 72 hours) * = maximum CPU% # = average CPU% ------------------ show diag ------------------ Slot 0: C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 18 ports Port adapter is analyzed Port adapter insommand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:00.743: EHWIC ESWGE I2C read error *Nov 21 16:10:00.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:01.547: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 ertion time 00:12:06 ago EEPROM contents at hardware discovery: PCB Serial Number : FOC18131PZ9 Hardware Revision : 1.0 Part Number : 73-11834-12 Top Assy. 16:10:01.547: EHWIC ESWGE I2C read error Part Number : 800-30795-06 Board Revision : A0 Deviation Number : 0 Fab Version : 03 P *Nov 21 16:10:01.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1roduct (FRU) Number : CISCO2901/K9 Version Identifier : V06 CLEI Code : CMMJA00ARA Processor type : C1 Chassis Serial Number : FGL181525SE C *Nov 21 16:10:01.627: EHWIC ESWGE I2C read error *Nov 21 16:10:02.307: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:02.307: EHWIC ESWGE I2C read error *Nov 21 16:10:02.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:hassis MAC Address : 1005.ca2d.9b98 MAC Address block size : 72 Manufacturing Test Data : 00 00 00 00 00 00 00 00 EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF C1 8B 46 4F 43 31 38 31 33 31 50 5A 39 40 0x10: 06 17 41 01 00 82 49 2E 3A 0C C0 46 03 20 00 78 0x20: 4B 06 42 41 30 88 00 00 00 00 02 03 CB 8C 43 49 0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 36 20 D9 0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 41 30 30 41 52 0x50: 41 09 C1 C2 8B 46 47 4C 31 38 31 10:02.387: EHWIC ESWGE I2C read error *Nov 21 16:10:03.083: EHWIC ESWGE I2C read error *Nov 21 16:10:03.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:03.287: EHWIC ESWGE I2C read error *Nov 21 16:10:03.367: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:04.047: %ESWGE_ERR-3-35 32 35 53 45 0x60: C3 06 10 05 CA 2D 9B 98 43 00 48 C4 08 00 00 00 0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00 0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93 0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0 0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42 0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20 0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21 0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF 0xE0: FF FF FF FF FF FF FF FCMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:04.047: EHWIC ESWGE I2C read error *Nov 21 16:10:04.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:04.127: EHWIC ESWGE I2C read error *Nov 21 16:10:04.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:F FF FF FF FF FF FF FF FF 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF PVDM Slot 0: 32-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card Hardware Revision : 1.0 Part Number : 73-11577-03 Board Revision : D0 Deviation Number : 0 Fab Version : 03 PCB Serial Number : FOC1813422C RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Processor type : 00 10:04.807: EHWIC ESWGE I2C read error *Nov 21 16:10:04.887: EHWIC ESWGE I2C read error *Nov 21 16:10:05.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:05.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:05.727: Product (FRU) Number : PVDM3-32 Version Identifier : V01 EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 05 D9 41 01 00 82 49 2D 39 03 42 44 30 0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 38 31 33 0x20: 34 32 32 43 03 00 81 00 00 00 00 04 00 09 00 CB 0x30: 8F 50 56 4EHWIC ESWGE I2C read error 4 4D 33 2D 33 32 20 20 20 20 20 20 20 0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF *Nov 21 16:10:05.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:05.807: EHWIC ESWGE I2C read error *Nov 21 16:10:06.487: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:06.487: EHWIC ESWGE I2C read error *Nov 21 16:10:06.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF WIC Slot 1: 8 Port GE Switch with POE PCB Serial Number : FOC18075TMC Hardware Revision : 1.0 Part Number : 74-7195-01 Board Revision Read fail at in slot 1 : D0 Deviation Number : 0 Product (FRU) Number : EHWIC-D-8ESG-P Version Identifier : V01 CLEI Code : COUIA48CAA Base MAC Address : d072.dc10.e9c0 MAC Address block size : 8 EEPROM format *Nov 21 16:10:06.567: EHWIC ESWGE I2C read error *Nov 21 16:10:07.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:07.335: EHWIC ESWGE I2C read error *Nov 21 16:10:07.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1 version 4 EEPROM contents (hex): 0x00: 04 FF 40 06 B7 C1 8B 46 4F 43 31 38 30 37 35 54 0x10: 4D 43 41 01 00 82 4A 1C 1B 01 42 44 30 88 00 00 0x20: 00 00 CB 8E 45 48 57 49 43 2D 44 2D 38 45 53 47 0x30: 2D 50 89 56 30 31 20 D9 03 40 C1 CB C6 8A 43 4F 0x40: 55 49 41 34 38 43 41 41 CF 06 D0 72 DC 10 E9 C0 0x50: 43 00 08 FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF WIC Slo0:07.415: EHWIC ESWGE I2C read error *Nov 21 16:10:07.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:08.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:08.175: EHWIC ESWGE I2C read error *Nov 21 16:10:08.323: EHWIC ESWGE I2C read error t 2: 2nd generation - FXO Voice daughter card (4 port) Hardware Revision : 5.0 Top Assy. Part Number : 800-33585-01 Board Revision : E0 Deviation Number : 0-0 Fab Version : 04 PCB Serial Number : FOC18122S2U RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Product (FRU) Number : VIC2-4FXO Version Identifier : V04 CLEI Code : CNUIAXJAAC EEPROM format version 4 *Nov 21 16:10:09.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:09.003: EHWIC ESWGE I2C read error *Nov 21 16:10:09.171: EHWIC ESWGE I2C read error *Nov 21 16:10:09.379: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:10.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c EEPROM contents (hex): 0x00: 04 FF 40 00 4C 41 05 00 C0 46 03 20 00 83 31 01 0x10: 42 45 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 31 0x20: 38 31 32 32 53 32 55 03 00 81 00 00 00 00 04 00 0x30: CB 89 56 49 43 32 2D 34 46 58 4F 89 56 30 34 20 0x40: C6 8A 43 4E 55 49 41 58 4A 41 41 43 FF FF FF FF 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF WIC Slot 3: 3rd gmd at in slot 1 Read fail at in slot 1 *Nov 21 16:10:10.059: EHWIC ESWGE I2C read error *Nov 21 16:10:10.139: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:10.139: EHWIC ESWGE I2C read error *Nov 21 16:10:10.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail eneration - FXS DID Voice daughter card (4 port) Hardware Revision : 1.0 Top Assy. Part Number : 800-33583-01 Board Revision : E0 Deviation Number : 0 Fab Version : 07 PCB Serial Number : FOC18129GZ6 RMA Test History : 00 RMA Number : *Nov 21 16:10:10.819: EHWIC ESWGE I2C read error 0-0-0-0 RMA History : 00 Product (FRU) Number : VIC3-4FXS/DID Version Identifier : V03 CLEI Code : IPUIA6JRAC Longitudinal Calibration : 01 1 *Nov 21 16:10:10.899: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:10.899: EHWIC ESWGE I2C read error *Nov 21 16:10:11.579: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:11.579: EHWIC ESWGE I2C read error *Nov 21 160 10 9D 75 10 10 89 62 10 10 7F AB 10 10 87 75 EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 05 1B 41 01 00 C0 46 03 20 00 83 2F 01 0x10: 42 45 30 88 00 00 00 00 02 07:10:11.659: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 C1 8B 46 4F 43 31 0x20: 38 31 32 39 47 5A 36 03 00 81 00 00 00 00 04 00 0x30: CB 8D 56 49 43 33 2D 34 46 58 53 2F 44 49 44 89 0x40: 56 30 33 20 D9 02 40 C1 C6 8A 49 50 55 49 41 36 0x50: 4A 52 41 43 D3 11 01 10 10 9D 75 10 10 89 62 10 *Nov 21 16:10:11.659: EHWIC ESWGE I2C read error *Nov 21 16:10:11.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:12.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:12.419: EHWIC ESWGE I2C read error *Nov 21 10x60: 10 7F AB 10 10 87 75 FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Internal Services Module (ISM) Slot 0 Internal Services Module with Service6:10:12.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1s Ready Engine Internal Services Module is analyzed Internal Services Module insertion time 00:12:05 ago EEPROM contents at hardware discovery: PCB Serial Number : FOC18092ZJB Hardware Revision : 1.0 Part Number : 73-13417-01 Top Assy. Part Number : 800-34577-01 Deviatio *Nov 21 16:10:12.499: EHWIC ESWGE I2C read error *Nov 21 16:10:13.271: EHWIC ESWGE I2C read error *Nov 21 16:10:13.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:13.535: EHWIC ESWGE I2C read errorn Number : 0 Fab Version : 04 Board Revision : A0 RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 CLEI Code : IPUCAXHBAB Product (FRU) Number : ISM-SRE-300-K9 Version Identifier : V02 EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF C1 8B 46 4F 43 31 38 30 39 32 5A 4A 42 40 0x10: 06 31 41 01 00 82 49 34 69 01 C0 46 03 20 00 87 0x20: 11 01 88 00 00 00 00 02 04 42 *Nov 21 16:10:13.635: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:14.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:14.315: EHWIC ESWGE I2C read error *Nov 21 16:10:14.395: EHWIC ESWGE I2C read error *Nov 21 16 cmd Read fail at in slot 1:10:15.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C41 30 03 00 81 00 0x30: 00 00 00 04 00 C6 8A 49 50 55 43 41 58 48 42 41 0x40: 42 CB 8E 49 53 4D 2D 53 52 45 2D 33 30 30 2D 4B 0x50: 39 89 56 30 32 20 D9 03 40 C1 CB F3 00 06 40 05 0x60: F3 43 00 16 FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Embedded Service Engine 0/0 : Total platform memory : 524288K bytes Total 2nd core memory : 0K bytes Start of physical address for 2nd core : 0x80000000 Virtual address start of 2nd *Nov 21 16:10:15.075: EHWIC ESWGE I2C read error *Nov 21 16:10:15.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:15.155: EHWIC ESWGE I2C read error *Nov 21 16:10:15.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10core memory : 0x0 - 0x0 2nd core configured disabled L2 cache ways for 2nd core : 0 ------------------ show platform ------------------ CIU Interrupt info: =================== CIU Int Handler Count Context Level Name 0 0x3001F8B0 1737 0x0 IP2 Pow Interrupt 18 0x30027D28 742 0x2 IP3 fpga interrupt 30 0x30028F94 0 0xE IP2 USB 0 Over Current i 31 0x30028F94 0 0xF IP2 USB 1 Over Current i:15.835: EHWIC ESWGE I2C read error *Nov 21 16:10:15.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:15.915: EHWIC ESWGE I2C read error *Nov 21 16:10:15.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:16.675: %E 32 0x302F1F90 0 0x0 IP2 MBOX0 interrupt 33 0x302F1F90 0 0x0 IP2 MBOX1 interrupt 34 0x30317FC4 1 0x1 IP4 Aux Port interruSWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1pt 35 0x30317FC4 6810 0x0 IP4 Console interrupt 40 0x3002833C 0 0x0 IP2 MSI 0 interr *Nov 21 16:10:16.675: EHWIC ESWGE I2C read error upt 41 0x3002833C 539 0x1 IP2 MSI 1 interrupt 42 0x30028138 266 0x2 IP2 IO-Controller Networ 43 0x30027F34 18 0x3 IP2 IO-C *Nov 21 16:10:16.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:16.755: EHWIC ESWGE I2C read error *Nov 21 16:10:17.531: EHWIC ESWGE I2C read error *Nov 21 16:10:17.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1ontroller Mgmt/E 46 0x30029008 1 0x0 IP2 NPEI RML interrupt 52 0x30331FA0 339 0x3C8BFB64 IP3 CIU Timer 0 ISR 53 0x30331FA0 200307 0x21294634 IP2 CIU Timer 1 ISR 54 0x30331FA0 77 0x3C8BFBD8 IP2 CIU Timer 2 ISR 56 0x3037AC40 1 0x0 IP2 USB 0 interrupt IP2 Int En: 0x01604F03 C0000001 IP3 Int En: 0x00100000 00040000 IP4 Int En: 0x0000000C 00000000 Interrupt Counters: =================== Int Level Counter: L1 (ne0:17.611: EHWIC ESWGE I2C read error *Nov 21 16:10:17.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:18.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:18.371: EHWIC ESWGE I2C read error *Nov 21 16:10:18.511: EHWIC ESWGE I2C read error *Nov 21 16:10:19.191: %ESWGE_ERR-3-CMtio) 204696, L2 0, L3 (mgmt) 1081, L4 (console) 6811, L5 0, L6 0DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1, l7 (4ms timer) 193921 CIU IP level int counter: IP2 204738, IP3 1081, IP4 6811 Debug counters/Info: ciu_int2_count 204738, ciu_int3_count 1081, ciu_int4_count 6811 unknown_ip4_int_cnt 0, unreg_int_cnt 0, wdog_int_cnt 0 unreg_int_sum1 0x0, unreg_int_sum2 0x0 spur_timer_int 0, unreg_msi_int_cnt 0 rml_int 1, npei_int 0, usb1_int 1 npei_pcie0_err 0, npei_pcie1_err 0, npei_pcie_timeout 0 fpa_err 0, pip_err 0, ipd_err 0, mio_err *Nov 21 16:10:19.191: EHWIC ESWGE I2C read error *Nov 21 16:10:19.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:19.271: EHWIC ESWGE I2C read error *Nov 21 16:10:19.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 161 l2c_err 0, l2c_int_sum 0x00000000, lmc_err 0 l2d_faddr 0x00000000, l2t_fddr 0x00000000, lmc_faddr 0x00000000 usb 0/1 over current 0/0 pcie0_cfg030 0x0000583F, pcie1_cfg030 0x00000000 pcie0_cfg065 0x00000000, pcie1_cfg065 0x00000000 pcie0_cfg068 0x00000000, pcie1_cfg068 0x00000000 pcie0_cfg071 0x00000000, pcie1_cfg071 0x00000000 pcie0_cfg072 0x00000000, pcie1_cfg072 0x00000000 pcie0_cfg073 0x00000000, pcie1_cfg073 0x00000000 pcie0_cfg074 0x00000000, pcie1_cfg074 0x00000000 pcie0_cfg0:10:19.951: EHWIC ESWGE I2C read error *Nov 21 16:10:20.031: EHWIC ESWGE I2C read error *Nov 21 16:10:20.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:20.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:20.835: 76 0x00000000, pcie1_cfg076 0x00000000 pcie0_dbg_info 0x00000000, pcie1_dbg_info 0x00000000 fpa_int_sum 0x00000000, pip_err_reg 0x00000000, ipd_int_sum 0x00000000 MSI Interrupt info: =================== EHWIC ESWGE I2C read error Update, hdlr 0x3029F298, cnt 260, ctx 0x21C2EA7C, slot 1, ISM, NETIO, number 0 MSI 76, name: PSE2 GE TxBD Update, hdlr 0x3029EA88, cnt 279, ctx 0x21C2EA7C, slot 1, ISM, NETIO, number 4 MSI 77, name: PSE2 UART Interrupt, hdlr 0x3029F250, cnt 0, ctx 0x21C2EA7C, slot 1, *Nov 21 16:10:20.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:20.915: EHWIC ESWGE I2C read error *Nov 21 16:10:21.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:21.595: EHWIC ESWGE I2C read error *Nov 21 16:10:21.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cISM, NETIO, number 5 MSI 78, name: PSE2 Misc Event Int, hdlr 0x3029EEB0, cnt 0, ctx 0x21C2EA7C, slot 1, ISM, NETIO, number 6 MSI 79, name: PSE2 FPGA Err Inter, hdlr 0x3029EFE8, cnt 0, ctx 0x21C2EA7C, slot 1, ISM, NETIO, number 7 MSI 128, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx 0x0, slot 0, IO_Controllermd Read fail at in slot 1, NETIO, number 0 MSI 129, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx 0x1, slot 0, IO_Controller, NETIO, number 1 MSI 130, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx *Nov 21 16:10:21.675: EHWIC ESWGE I2C read error *Nov 21 16:10:21.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:22.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:22.575: EHWIC ESWGE I2C read error *Nov 21 16:10:22.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c0x2, slot 0, IO_Controller, NETIO, number 2 MSI 131, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx 0x3, slot 0, IO_Contrmd Read fail at in slot 1oller, NETIO, number 3 MSI 132, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx 0x4, slot 0, IO_Controller, NETIO, number *Nov 21 16:10:22.655: EHWIC ESWGE I2C read error 4 MSI 133, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx 0x5, slot 0, IO_Controller, NETIO, number 5 MSI 134, name: wic_mbrd_hdlc_intr, hdlr 0x305D888C, cnt 0, ctx 0x6, slot 0, IO_Controller, NETIO, number 6 MSI 135, name: wic_mbrd_hdlc_intr, *Nov 21 16:10:23.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:23.335: EHWIC ESWGE I2C read error *Nov 21 16:10:23.555: EHWIC ESWGE I2C read error *Nov 21 16:10:24.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: hdlr 0x305D888C, cnt 0, ctx 0x7, slot 0, IO_Controller, NETIO, number 7 MSI 137, name: net_int_wrapper, hdlr 0x305B8C04, cnt 266, ctx 0x21BD1E5C, slot 0, IO_Controller, NETIO, number 9 MSI 155, name: i2c intr handler, hdlr 0x3085D6C4, cnt 0, ctx 0x0, slot 0, IO_Controller, NETIO, number 27 MSI 156, name: wic_mbrd_scc_netio_, hdlr 0x305D8468, cnt 0, ctx 0x0, slot 0, IO_Controller, NETIO, number 28 10:24.235: EHWIC ESWGE I2C read errordlr 0x305D8510, cnt 1, ctx 0x0, slot 0, IO_Controller, ERR, number 0 *Nov 21 16:10:24.315: EHWIC ESWGE I2C read error *Nov 21 16:10:24.539: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:25.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:25.219: MSI 193, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 1, ctx 0x1, slot 0, IO_Controller, ERR, number 1 MSI 194, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 1, ctx 0x2, slot 0, IO_Controller, ERR, number 2 MSI 195, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 1, ctx 0x3, slot 0, IO_Controller, ERR, number 3 MSI 196, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 1, ctx 0x4, slot 0, IO_Controller, ERR, number 4 MSI 197, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 1, ctx 0x5, slot 0, IO_CoEHWIC ESWGE I2C read error *Nov 21 16:10:25.299: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:25.299: EHWIC ESWGE I2C read error *Nov 21 16:10:25.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:25.979: EHWIC ESWGE I2C read error *Nov 21 16:10:26.059: %ESWGE_ERR-3-CMDQ_FULL: ntroller, ERR, number 5 MSI 198, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 0, ctx 0x6, slot 0, IO_Controller, ERR, number 6 MSI 199, name: wic_mbrd_hdlc_error, hdlr 0x305D8510, cnt 1, ctx 0x7, slot 0, IO_Controller, ERR, number 7 MSI 201, name: error_int_wrapper, hdlr 0x305B8B80, cnt 1, ctx 0x21BD1E5C, slot 0, IO_Controller, ERR, number 9 MSI 209, name: mgmt_int_wrapper, hdlr 0x305B9F4C, cnt 16, ctx 0x21BD1E5C, slot 0, IO_Controller, MGMT, number 17 MSI 212, name: Hsib Error Monitor , hdlr 0x308Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:26.059: EHWIC ESWGE I2C read error *Nov 21 16:10:26.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:26.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 163EB0, cnt 0, ctx 0x0, slot 0, IO_Controller, ERR, number 20 MSI 220, name: wic_mbrd_scc_mgmt_i, hdlr 0x305D7D68, cnt 0, ctx 0x0, slot 0, IO_Controller, MGMT, number 28 MSI 221, name: tdm_exc6:10:26.867: EHWIC ESWGE I2C read error eption_handl, hdlr 0x30C66CF4, cnt 0, ctx 0x108A0000, slot 0, IO_Controller, ERR, number 29 MSI 222, name: GPIO interrupt hand, h *Nov 21 16:10:26.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1dlr 0x308547A4, cnt 0, ctx 0x10900200, slot 0, IO_Controller, ERR, number 30 MSI Enable Reg 0: 0x00000000 00000000 MSI Enable Reg 1: 0x00000000 0000F100 MSI Enable Reg 2: 0x0000000 *Nov 21 16:10:26.947: EHWIC ESWGE I2C read error *Nov 21 16:10:27.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:27.627: EHWIC ESWGE I2C read error *Nov 21 16:10:27.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:100 180002FF MSI Enable Reg 3: 0x00000000 701202FF NPEI_INT_ENB2: 0x201FFFFE 14280007 Platform DMA brief information: =============================== DMA Channel 1: is free. DMA Channel 2: is free. DMA Channel 3: is free. CISCO2901/K9 Network IO Interrupt Throttling: throttle count=1800, timer count=339 throttle counts= 1800 0 0 0 0 active=0, configured=1 netint usec=20000, netint mask usec=1000 real netint usec=3999, real netint mask usec=200 CPU Registers: Processor Revis:27.707: EHWIC ESWGE I2C read error *Nov 21 16:10:28.471: EHWIC ESWGE I2C read error *Nov 21 16:10:28.679: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:28.679: EHWIC ESWGE I2C read error *Nov 21 16:10:28.759: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:29.439: %ESWGE_ERR-3-Cion ID : 0xD0708 Configuration : 0x8000C48B Status : 0x50009FE1 Cause : 0x0 Count : 0x86BF4CC8 Compare : 0x86D902A8 WatchLo (0) : 0x0 WatchLo (1) : 0x4ECBACDFE72D7DE0 WatchHo (0) : 0x80000000 WatchHo (1) : 0x80000000 CacheErr (D) : 0x2668 TagLo (I) : 0xCFF15EFF5F5B5003 TagLo (D) : 0x0 DataLo (I) : 0x88F9E3FF00FFFFFC DataLo (D) : 0x201FFFFE14280007 TagHi MDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:29.439: EHWIC ESWGE I2C read error *Nov 21 16:10:29.519: EHWIC ESWGE I2C read error *Nov 21 16:10:30.199: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:30.199: EHWIC ESWGE I2C read error *Nov 21 16:10:30.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue (D) : 0x0 DataHi (I) : 0x1 DataHi (D) : 0xD1 CVM Control : 0xB00003F0 CVM Mem Ctrl : 0x46102 CVM Count : 0x6F61997313 MultiCore Dbg : 0x0 CIU PP RST : 0xE CIU MBOX CLRX0 : 0x0 CIU MBOX SETX0 : 0x0 CIU MBOX CLRX1 : 0x0 CIU MBOX SETX1 : 0x0 BOOT_CFG_REG 0 : 0x200B13F1EC0 BOOT_TIM_REG 0 : 0x1000080C0869044 BOOT_CFG_REG 1 : 0x0 BOOT_TIM_REG 1 : 0xFFFFFFFFFFFFFFF BOOT_CFG_REG 2 : 0xB00F1010 BOOT_TIM_REG 2 : 0x1800is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:30.279: EHWIC ESWGE I2C read error *Nov 21 16:10:30.439: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:31.119: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:31.119: 05249560043 BOOT_CFG_REG 3 : 0xB00F1020 BOOT_TIM_REG 3 : 0x180005249560043 BOOT_CFG_REG 4 : 0xB00F1030 BOOT_TIM_REG 4 : 0x13FFE8208A28186 BOOT_CFG_REG 5 : 0xB00F1040 BOOT_TIM_REG 5 : 0x13FFE8208A28186 BOOT_CFG_REGEHWIC ESWGE I2C read error 6 : 0xB00F1050 BOOT_TIM_REG 6 : 0xBFFC4000722000 BOOT_CFG_REG 7 : 0xB00F1060 BOOT_TIM_REG 7 : 0xBFFC40 *Nov 21 16:10:31.199: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100722000 On-board SPD data : Size of dimm = 512 Megabytes Memory Type = 0x8 Row Add *Nov 21 16:10:31.199: EHWIC ESWGE I2C read error *Nov 21 16:10:31.879: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:31.879: EHWIC ESWGE I2C read error *Nov 21 16:10:31.959: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:31.959: EHWIC ESWGE I2C read error *Nov 21 16:10:32.671: EHresses = 0xD Column Address = 0xA Module Rows = 0x60 Data Width = 0x48 Voltage Interface = 0x5 Cycle Time = 0x30 Access Time = 0x45 Configuration Type = 0x2 Refresh Rate/Type = 0x82 Primary Width = 0x10 Error Width = 0x10 Burst Lengths = 0xC Number of Banks = 0x8 Cas Latency = 0x30 WIC ESWGE I2C read error *Nov 21 16:10:32.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:32.751: EHWIC ESWGE I2C read error *Nov 21 16:10:32.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:33.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1DIMM Mechanical = 0x1 DIMM Type = 0x2 Module Attributes = 0x0 General Attributes = 0x3 Min Cycle Time, CAS of 2 = 0x3D Access Clock Cycle, CAS of 2 = 0x45 Min Cycle Time, CAS of 1 = 0x0 Access Clock Cycle, CAS of 2 = 0x0 Row Precharge = 0x3C Row Active to Row Active = 0x28 RAS CAS Delay = 0x3C Ras Pulse Width = 0x2D Rank Density = 0x80 COM Setup Time = *Nov 21 16:10:33.555: EHWIC ESWGE I2C read error *Nov 21 16:10:33.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:33.727: EHWIC ESWGE I2C read error *Nov 21 16:10:34.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:34.407: EHWIC ESWGE I2C read error *Nov 21 16:10:34.563: EH 0x20 COM Hold Time = 0x27 Data Setup Time = 0x10 Data Hold Time = 0x17 COM Setup Time = 0x20 COM Setup Time = 0x20 COM Setup Time = 0x20 COM Setup Time = 0x20 Write Recovery Time = 0x3C Write to Read Cmd Delay = 0x1E Read to Precharge Delay = 0x1E Probe Characteristics = 0x0 Byte Ext to tRC and tRFC = 0x6 Min Act to Act Refresh = 0x3C Min Refresh to Act RefrWIC ESWGE I2C read error *Nov 21 16:10:34.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:35.447: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:35.447: EHWIC ESWGE I2C read error *Nov 21 16:10:35.527: %ESWGE_ERR-3-esh = 0x7F Max Device Cycle Time = 0x80 Device DQS-DQ Skew for DQS = 0x18 Read Data Hold Skew Factor = 0x22 PLL Relock Time = 0x0 Vendor Id = 0000000000000000 Module Part Number = Module RevisCMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ion Code = 0000 SPD contents (hex): 0x00: 80 08 08 0D 0A 60 48 00 05 30 45 02 82 10 10 00 0x10: 0C 08 30 01 02 00 03 3D 45 00 00 3C 28 3C 2D 80 0x20: 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 00 00 0x30: 00 00 00 00 00 00 00 00 00 00 *Nov 21 16:10:35.527: EHWIC ESWGE I2C read error *Nov 21 16:10:36.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:36.207: EHWIC ESWGE I2C read error *Nov 21 16:10:36.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 00 00 00 00 12 F9 0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DIMM0 :10:36.287: EHWIC ESWGE I2C read error SPD data : Memory Slot Empty FPA Buffer pools information: FPA INT SUM: 0x0000000000000000, ENB: 0x000000000FFFFFFF FPA CTL STATUS: 0x0000000000004000 FPA QUE(n) AVAILABLE: QUE(0): 0x00000000000002E7, QUE(1): 0x0000000000000FF7 QUE(2): 0x00000 *Nov 21 16:10:36.967: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:36.967: EHWIC ESWGE I2C read error *Nov 21 16:10:37.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:37.047: EHWIC ESWGE I2C read error *Nov 21 160000000001D, QUE(3): 0x0000000000000600 QUE(4): 0x0000000000000000, QUE(5): 0x0000000000000000 QUE(6): 0x0000000000000000, QUE(7): 0x0000000000000000 FPA WART CTL: 0x0000000000000000, STATUS: 0x0000000000000000 FPA QUE(n) PAGE INDEX: QUE(0): 0x0000000000000016, QUE(1): 0x000000000000007F QUE(2): 0x0000000000000000, QUE(3): 0x000000000000002F QUE(4): 0x0000000000000000, QUE(5): 0x0000000000000000 QUE(6): 0x0000000000000000, QUE(7): 0x0000000000000000 FPA QUE EXE: 0x0000000000000000, ACT: 0:10:37.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:37.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:37.807: EHWIC ESWGE I2C read error *Nov 21 16:10:37.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmC read error d Read fail at in slot 1 *Nov 21 16:10:37.887: EHWIC ESWGE I2x0000000000000000 Cavium IPD Registers: IPD_1ST_MBUF_SKP:0x0000000000000000, IPD_NOT_1ST_MBUF:0x0000000000000000 IPD_PKT_MBUF_SZE:0x00000000000000C0, IPD_CTL_STATUS :0x0000000000000209 IPD_WQE_FPA_QUE :0x0000000000000001, IPD_SUB_BP_CNT :0x0000000007FFFFFF IPD_BP_PRT_REDE :0x000000000000000B, IPD_RED_PT_EN2 :0x0000000000000000 IPD_RED_QUE(0)_PARAM :0x0001FF0100000000 IPD_RED_QUE(1)_PARAM :0x0001FF0100000000 IPD_RED_QUE(2)_PARAM :0x0001FF0100000000 IPD_RED_QUE(3)_PARAM :0x0001FF0100000 *Nov 21 16:10:38.627: EHWIC ESWGE I2C read error *Nov 21 16:10:38.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:38.895: EHWIC ESWGE I2C read error *Nov 21 16:10:38.975: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16000 IPD_RED_QUE(4)_PARAM :0x0001FF0100000000 IPD_RED_QUE(5)_PARAM :0x0001FF0100000000 IPD_RED_QUE(6)_PARAM :0x0001FF0100000000 IPD_RED_QUE(7)_PARAM :0x0001FF0100000000 IPD_QOS(0)_RED_MARKS :0x0000010000000000 IPD_QOS(1)_RED_MARKS :0x0000010000000000 IPD_QOS(2)_RED_MARKS :0x0000010000000000 IPD_QOS(3)_RED_MARKS :0x0000010000000000 IPD_QOS(4)_RED_MARKS :0x0000010000000000 IPD_QOS(5)_RED_MARKS :0x0000010000000000 IPD_QOS(6)_RED_MARKS :0x0000010000000000 IPD_QOS(7)_RED_MARKS :0x00000100:10:39.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:39.655: EHWIC ESWGE I2C read error *Nov 21 16:10:39.735: EHWIC ESWGE I2C read error *Nov 21 16:10:40.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:40.415: EHWIC ESWGE I2C read error *Nov 21 16:10:40.495: %ESWGE_ERR-300000000 Cavium PKO Registers: PKO_MEM_COUNT(0):0x0000000000000000, PKO_MEM_COUNT(1):0x0000000000000000 PKO_MEM_DEBUG(0):0x0000000000000000, PKO_MEM_DEBUG(1):0x0000000000000000 PKO_MEM_DEBUG(10):0x0000000000000000, PKO_MEM_DEBUG(11): 0x00000000000-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100000 PKO_MEM_DEBUG12: 0x0000000000000000, PKO_MEM_DEBUG13: 0x0000000000000000 PKO_MEM_DEBUG14: 0x0000000000000000, PKO_MEM_DEBUG2: 0x0000000000000000 PKO_MEM_DEBUG3: 0x0000000000000000, PKO_MEM_DEBUG4: 0x0000000000000000 PKO_MEM_DEBUG5: 0x0000000 *Nov 21 16:10:40.495: EHWIC ESWGE I2C read error *Nov 21 16:10:41.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:41.175: EHWIC ESWGE I2C read error *Nov 21 16:10:41.255: %ESWGE_ERR-3-CMDQ_FULL: Co000000000, PKO_MEM_DEBUG6: 0x0000000001000000 PKO_MEM_DEBUG7: 0xF80FE01923DA0000, PKO_MEM_DEBUG8: 0x000000000000003F PKO_MEM_DEBUG9: 0x0000000000000000, PKO_MEM_PORT_PTRS: 0x1FE0000000000000 PKO_MEM_PORT_QOS: 0x1FE0000000000000, PKO_MEM_PORT_RATE0: 0mmand queue is Full, I2C cmd Read fail at in slot 1x0000000000000000 PKO_MEM_PORT_RATE1: 0x0000000000000000, PKO_MEM_QUEUE_PTRS: 0xFFE01923DA000000 PKO_MEM_QUEUE_QOS: 0x1FE0000000000000, PKO_REG_BIST_RESULT: 0x0000000000000000 PKO_REG_CMD_BUF: 0x00000000 0x0020007F, PKO_REG_CRC_ENABLE: 0x00000000000 *Nov 21 16:10:41.255: EHWIC ESWGE I2C read error *Nov 21 16:10:41.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:42.015: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:42.015: EHWIC ESWGE I2C read error *Nov 21 100000 PKO_REG_DEBUG0: 0x0000000000000000, PKO_REG_DEBUG1: 0x0000000000000000 PKO_REG_DEBUG2: 0x0000000000000000, PKO_REG_DEBUG3: 0x0000000000000000 PKO_REG_ENGINE_INFLIGHT: 0x00000044000046:10:42.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1444, PKO_REG_ENGINE_THRESH: 0x0000000000000000 PKO_REG_ERROR: 0x0000000000000000, PKO_REG_FLAGS: 0x0000000000000007 PKO_REG_GMX_PORT_MODE: 0x0000000000000002, PKO_REG_INT_MASK: 0x0000000000000000 PKO_REG_QUEUE_MODE: 0x0000000000000000, PKO_REG_QUEUE_PTRS1: 0x0000000000000000 PKO_REG_READ_IDX: 0x0000000000000 *Nov 21 16:10:42.095: EHWIC ESWGE I2C read error *Nov 21 16:10:42.811: EHWIC ESWGE I2C read error *Nov 21 16:10:43.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:43.075: EHWIC ESWGE I2C read error *Nov 21 16:10:43.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is000 Watchodg information : ==================== L1 watchdog is ON Address = 0x8001070000000500; Value = 0x4034FE40402 Mode = 2 Length = 16448 (1999 millisec) L2 watchdog is ON - watchdog 0 is used wdog_timer_limit address 0x10900494, value 0x1312D00 UART Information: ============== AUX (Uart 0) Port Registers: ----------------------- SR: 0x6 IER: 0xD IIR: 0xC1 LCR: 0x7 MCR: 0x3 LSR: 0x60 MSR: 0x0 FCR: 0xC1 TFL: 0x0 RFL: 0x0 Parity Error = 0, Framing Error = 0, Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:43.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:43.835: EHWIC ESWGE I2C read error *Nov 21 16:10:43.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is FuWIC ESWGE I2C read error ll, I2C cmd Read fail at in slot 1 *Nov 21 16:10:43.915: EH Receive Error = 0 Outcount = 0, TotalOut = 39, Incount = 0, Total In = 0 Overrun = 0, Overflow = 0 Brk Character: Received 0, Brk Processed 0 Console (Uart 1) Port Registers: ------------------- SR: 0x2 IER: 0xF IIR: 0xC1 LCR: 0x7 MCR: 0x3 LSR: 0x0 MSR: 0x10 FCR: 0xC1 TFL: 0x3D RFL: 0x0 Parity Error = 0, Framing Error = 0, Receive Error = 0 Outcount = 369, TotalOut = 405598, Incount = 20, Total In = 431 Overrun = 0, Overflow = 0 Brk Character: Received 0, Brk Processed 0 TL *Nov 21 16:10:44.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:44.595: EHWIC ESWGE I2C read error *Nov 21 16:10:44.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:44.675: EHWIC ESWGE I2C read error *Nov 21 16:B entries : =========== Entries used: 34 SN Size paddr vaddr perm 0 16MB 0x00000004_10000000:0x00000004_11FFFFFF 0x30000000:0x31FFFFFF 3,O,V 1 16MB 0x00000004_12000000:0x00000004_13FFFFFF 0x32000000:0x33FFFFFF 3,O,V 2 16MB 0x00000004_14000000:0x00000004_15FFFFFF 0x34000000:0x35FFFFFF 3,O,V 3 4MB 0x00000004_16000000:0x00000004_167FFFFF 0x36000000:0x367FFFFF 3,O,V 4 1MB 0x00000004_16800000:0x00000004_169FFFFF 0x36800000:0x369FFFFF 310:45.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:45.355: EHWIC ESWGE I2C read error *Nov 21 16:10:45.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:45.435: EHWIC ESWGE I2C read error *Nov 21 16:10:45.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fai,O,V 5 256KB 0x00000004_16A00000:0x00000004_16A7FFFF 0x36A00000:0x36A7FFFF 3,O,V 6 256KB 0x00000004_16A80000:0x00000004_16AFFFFF 0x36A80000:0x36AFFFFF 3,O,V 7 64KB 0x00000004_16B00000:0x00000004_16B1FFFF 0x36B00000:0x36B1FFFF 3,O,V 8 64KB 0x000l at in slot 1 *Nov 21 16:10:46.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100004_16B20000:0x00000004_16B3FFFF 0x36B20000:0x36B3FFFF 3,W,V 9 64KB 0x00000004_16B40000:0x00000004_16B5FFFF 0x36B40000:0x36B5FFFF 3,W,V 10 64KB 0x00000004_16B60000:0x00000004_16B7FFFF 0x36B60000:0x36B7FFFF 3,W,V 11 256KB 0x00000004_16B80000:0 *Nov 21 16:10:46.195: EHWIC ESWGE I2C read error *Nov 21 16:10:46.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:46.275: EHWIC ESWGE I2C read error *Nov 21 16:10:47.035: EHWIC ESWGE I2C read error x00000004_16BFFFFF 0x36B80000:0x36BFFFFF 3,W,V 12 1MB 0x00000004_16C00000:0x00000004_16DFFFFF 0x36C00000:0x36DFFFFF 3,W,V 13 1MB 0x00000004_16E00000:0x00000004_16FFFFFF 0x36E00000:0x36FFFFFF 3,W,V 14 4MB 0x00000004_17000000:0x00000004_177FFFFF 0x37000000:0x377FFFFF 3,W,V 15 4MB 0x00000004_17800000:0x00000004_17FFFFFF 0x37800000:0x37FFFFFF 3,W,V 16 64MB 0x00000004_18000000:0x00000004_1FFFFFFF 0x38000000:0x3FFFFFFF 3,W,V 17 16MB 0x00011B00_10000000:0x00011B00_11FFFFFF 0x10000000:0x11FFF *Nov 21 16:10:47.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:47.115: EHWIC ESWGE I2C read error *Nov 21 16:10:47.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:47.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:47.875: EFFF 0,W,V 18 16MB 0x00011E00_12000000:0x00011E00_13FFFFFF 0x1HWIC ESWGE I2C read error 2000000:0x13FFFFFF 0,W,V 19 16MB 0x00011C00_18000000:0x00011C00_19FFFFFF 0x18000000:0x19FFFFFF 0,W,V 20 4MB 0x00000000_00000000:0x00000000_007FFFFF 0x20000000:0x207FFFFF 0,O,V 21 4MB 0x00000000_00800000:0x00000000_00FFFFFF 0x20800000:0x20FFFFFF 0,O,V 22 4MB 0x00000000_01000000:0x00000000_017FFFFF 0x21000000:0x217FFFFF 0,W,V 23 4MB 0x00000000_01800000:0x00000000_01FFFFFF 0x21800000:0x21FFFFFF 0,W,V 24 16MB 0x00000000_02000 *Nov 21 16:10:48.031: EHWIC ESWGE I2C read error *Nov 21 16:10:48.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:48.711: EHWIC ESWGE I2C read error *Nov 21 16:10:48.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1000:0x00000000_03FFFFFF 0x22000000:0x23FFFFFF 0,W,V 25 16MB 0x00000000_04000000:0x00000000_05FFFFFF 0x24000000:0x25FFFFFF 0,W,V 26 16MB 0x00000000_06000000:0x00000000_07FFFFFF 0x26000000:0x27FFFFFF 0,W,V 27 16MB 0x00000000_08000000:0x00000000_09FFFFFF 0x28000000:0x29FFFFFF 0,W,V 28 16MB 0x00000000_0A000000:0x00000000_0BFFFFFF 0x2A000000:0x2BFFFFFF 0,W,V 29 4MB 0x00000000_0C000000:0x00000000_0C7FFFFF 0x2C000000:0x2C7FFFFF 0,W,V 30 4MB 0x00000000_0C800000:0x00000000_0CFFFFFF 0x0C800000:0x0:48.791: EHWIC ESWGE I2C read error *Nov 21 16:10:49.471: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:49.471: EHWIC ESWGE I2C read error *Nov 21 16:10:49.551: EHWIC ESWGE I2C read error *Nov 21 16:10:49.663: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:50.343: %ESWGE_ERR-3-CM0CFFFFFF 0,W,V 31 4MB 0x00000000_0D000000:0x00000000_0D7FFFFF 0x0D000000:0x0D7FFFFF 0,W,V 32 4MB 0x00000000_0D800000:0x00000000_0DFFFFFF 0x0D800000:0x0DFFFFFF 0,W,V 33 16MB 0x00000000_0E000000:0x00000000_0FFFFFFF 0x0E000000:0x0FFFFFFF 0,W,V 0 = write-thru(wt) 1 = wt, write-allocate, 2 = uncached 3 = non-coherent 4 = coherent, excl, 5 = coh excDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1l on write 6 = coh update on write W = ReadWrite, O = ReadOnly, V = Valid, I = Invalid Platform Support status o *Nov 21 16:10:50.343: EHWIC ESWGE I2C read error *Nov 21 16:10:50.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:50.423: EHWIC ESWGE I2C read error *Nov 21 16:10:51.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:51.103: EHWIC ESWGE I2C read error *Nov 21 16:10:51.199: f Compact Flash: =========================================== CF flash0: Compact Flash plugged in is Supported. CF flash1: Compact Flash not plugged in. LED STATUS: ========== FRONT PANEL LED CONTROL REGISTER -------------------------------- SYSTEM : GREEN ACTIVITY : OFF POE : GREEN RPS : OFF PS : OFF ISM and CFLASH LED CONTROL REGISTER ----------------------------------- ISM : GREEN CF0 : OFF CF1 : OFF DSP LED CONTROL REGISTER ----------------%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:51.199: EHWIC ESWGE I2C read error *Nov 21 16:10:51.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:52.083: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 --------16:10:52.083: EHWIC ESWGE I2C read error PVDM0 : GREEN PVDM1 : OFF GE LINK LED, SPEED LED ---------------------- PORT 0 : OFF, 0 (OFF) PORT 1 : OFF, 0 (OFF) LED CONTROL REGISTER (Value is number of 1/8 seconds ---------------------------------------------------- ON Time : 3 OFF Time : 3 PAUSE Time : 7 USB CONSOLE LED, RJ45 CONSOLE LED --------------------------------- USB : OFF RJ45 : GREEN Platform Revisions/Versions : =========================== FPGA : 5.02 [Val = 0x502] Board Rev : 2 [Val = 0x203; Type = 3] Env Rev : 4.5 [Val = 0x405, Bit 15 = 0] PSEQ Rev : 3.05 [Val = 0x305] *Nov 21 16:10:52.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:52.163: EHWIC ESWGE I2C read error *Nov 21 16:10:52.843: EHWIC ESWGE I2C read error *Nov 21 16:10:53.019: EHWIC ESWGE I2C read errorI/O Ctl Nm : GA 1.1 [Val = 0x47410101] I/O Ctl Ver: 2 [Val = 0x20316447] CPU information : --------------- Company ID = 0xD Processor ID = 0x7 Revision = 0x8 Company OPTs = 0x0 USB Con BL : 1.01 (Boot Loader) USB Con FW : 2.02 (Application Firmware) USB Con FWU: 2.02 (Application Firmware Upgrade) IOS : Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(1)T1, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright ( *Nov 21 16:10:53.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:53.699: EHWIC ESWGE I2C read error *Nov 21 16:10:53.779: EHWIC ESWGE I2C read error *Nov 21 16:10:54.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 1c) 1986-2014 by Cisco Systems, Inc. Compiled Wed 12-Feb-14 04:57 by prod_rel_team ROMMON (Readonly) : System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2012 by cisco Systems, Inc. CPU GPIO Register information : ============================= Data Register 0x8001070000000880 = 0x32B Pin: Config Reg Addr Data TX RX_Xor Int_en Int_type fil_cnt fil_sel 0 : 0x8001070000000800 1 0 0 0 0 6:10:54.687: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:54.687: EHWIC ESWGE I2C l at in slot 1read error *Nov 21 16:10:54.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:54.767: EHWIC ESWGE I2C read error *Nov 21 16:10:55.447: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai 0 0 1 : 0x8001070000000808 1 0 0 0 0 0 0 2 : 0x8001070000000810 0 0 1 1 0 0 0 3 : 0x8001070000000818 1 0 0 0 0 0 0 4 : 0x8001070000000820 0 0 0 0 0 0 0 5 : 0x8001070000000828 1 0 0 0 0 0 0 6 : 0x8001070000000830 0 0 0 0 0 0 0 7 : 0x8001070000000838 0 0 0 0 0 0 0 *Nov 21 16:10:55.447: EHWIC ESWGE I2C read error *Nov 21 16:10:55.527: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:55.527: EHWIC ESWGE I2C read error *Nov 21 16:10:55.651: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 1 8 : 0x8001070000000840 1 0 0 0 0 0 0 9 : 0x8001070000000848 1 0 0 0 0 0 0 10 : 0x8001070000000850 0 0 0 0 6:10:56.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 0 0 11 : 0x8001070000000858 0 0 0 0 0 0 0 12 : 0x8001070000000860 0 1 *Nov 21 16:10:56.331: EHWIC ESWGE I2C read error 0 0 0 0 0 13 : 0x8001070000000868 0 1 0 0 0 0 0 14 : 0x8001070000000870 0 0 1 1 1 0 0 15 : 0x80010 *Nov 21 16:10:56.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:56.411: EHWIC ESWGE I2C read error *Nov 21 16:10:57.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:57.091: EHWIC ESWGE I2C read error *Nov 21 16:170000000878 0 0 1 1 1 0 0 io-controller global register (addr 0x10900400): jtag_id (addr 0x10900400): 0x20316447 revision_id (addr 0x10900404): 0x47410101 diag_echo (addr 0x10900408): 0xFFFFFFFF software_memory_bist (addr 0x1090040C): 0x00000004 five_mhz_prescale (addr 0x10900410): 0x00000072 reset_sampled_inputs 0:57.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:57.171: EHWIC ESWGE I2C read error *Nov 21 16:10:57.851: EHWIC ESWGE I2C read error *Nov 21 16:10:58.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:58.127: EHWIC ESWGE I2C read error *Nov 21 16:10:58.207: %ESWGE_ERR-3-CMDQ_ (addr 0x10900414): 0x00000000 slew_rate_control_gpio1 (addr 0x10900420): 0x0000FFFF slew_rate_control_gpio0 (addr 0x10900424): 0xFFFFFFFF slew_rate_control_pvdm (addr 0x10900428): 0x000FFFFF slew_rate_control_slowgpio (addr 0x1090042C): 0x0000003F slew_rate_control_wic0 (addr 0x10900430): 0x003FFFFF slew_rate_control_wic1 (addr 0x10900434): 0x003FFFFF slew_rate_control_wic2 (addr FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:10:58.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:10:58.887: EHWIC ESWGE I2C read error *Nov 21 16:10:58.967: EHWIC ESWGE I2C read error *Nov 21 16:10:59.647: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:100x10900438): 0x003FFFFF slew_rate_control_wic3 (addr 0x1090043C): 0x003FFFFF wic_spi_control0 (addr 0x10900440): 0x245DCFFF wic_spi_control1 (addr 0x10900444): 0x00000000 io-controller gpio (addr 0x10900200): in_out_config2 (addr 0x10900204): 0x40154415 in_out_config1 (addr 0x10900208): 0x44155105 in_out_config0 (addr 0x1090020C): 0x14504015 polarity_ct:59.647: EHWIC ESWGE I2C read error *Nov 21 16:10:59.727: EHWIC ESWGE I2C read error *Nov 21 16:10:59.843: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:00.523: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:00.523: EHrl1 (addr 0x10900210): 0x0000C0C0 polarity_ctrl0 (addr 0x10900214): 0xC0FFFFC0 debounce_ctrl1 (addr 0x10900218): 0x00000000 debounce_ctrl0 (addr 0x1090WIC ESWGE I2C read error 021C): 0x00249000 debounce_time5 (addr 0x10900220): 0x00000000 debounce_time4 *Nov 21 16:11:00.603: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10900224): 0x00000000 debounce_time3 (addr 0x10900228): 0x00000000 debounce_time2 *Nov 21 16:11:00.603: EHWIC ESWGE I2C read error *Nov 21 16:11:01.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:01.283: EHWIC ESWGE I2C read error *Nov 21 16:11:01.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:01.363: EHWIC ESWGE I2C read error *Nov 21 16:11:02.043: E (addr 0x1090022C): 0x0000C351 debounce_time1 (addr 0x10900230): 0x0000C351 debounce_time0 (addr 0x10900234): 0x00000000 reg_input_value1 (addr 0x10900238): 0x00003A1A reg_input_value0 (addr 0x1090023C): 0x1808022C reg_output_value1 (addr 0x10900240): 0x00000202 reg_output_value0 (addr 0x10900244): 0x00000004 intr_type2 HWIC ESWGE I2C read error *Nov 21 16:11:02.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:02.263: EHWIC ESWGE I2C read error *Nov 21 16:11:02.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:03.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot (addr 0x1090024C): 0xEFFFEFFF intr_type1 (addr 0x10900250): 0xEFFFFFFF intr_type0 (addr 0x10900254): 0xFFFEEFFF latch_unlatch_intr1 (addr 0x10900258): 0x00000000 latch_unlatch_intr0 (addr 0x1090025C): 0x00000000 err_intr_status1 (addr 0x10900260): 0x00000000 err_intr_status0 (addr 0x10900264): 0x00000000 mgmt_intr_status1 1 *Nov 21 16:11:03.023: EHWIC ESWGE I2C read error *Nov 21 16:11:03.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:03.103: EHWIC ESWGE I2C read error *Nov 21 16:11:03.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:03.783: EHWIC ESWGE I2C read error *Nov 21 16:11:04.055: (addr 0x10900268): 0x00000000 mgmt_intr_status0 (addr 0x1090026C): 0x00000000 ntwk_intr_status1 (addr 0x10900270): 0x00000000 ntwk_intr_status0 (addr 0x10900274): 0x00000000 err_intr_enable1 (addr 0x10900278): 0x00000000 err_intr_enable0 (addr 0x1090027C): 0x00000040 mgmt_intr_enable1 (addr 0x10900280): 0x00000000 mgmt_intr_enable0 EHWIC ESWGE I2C read error *Nov 21 16:11:04.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:04.855: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:04.855: EHWIC ESWGE I2C read error *Nov 21 16:11:04.935: %ESWGE_ERR-(addr 0x10900284): 0x00000000 ntwk_intr_enable1 (addr 0x10900288): 0x00000000 ntwk_intr_enable0 (addr 0x1090028C): 0x00000000 intr_test1 (addr 0x10900290): 0x00000000 intr_test0 (addr 0x10900294): 0x00000000 3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1slow_output1 (addr 0x109002A0): 0x00000000 slow_output0 (addr 0x109002A4): 0x40041000 slow_input1 (addr 0 *Nov 21 16:11:04.935: EHWIC ESWGE I2C read error *Nov 21 16:11:05.615: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:05.615: EHWIC ESWGE I2C read error *Nov 21 16:11:05.695: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:x109002A8): 0x00000000 slow_input0 (addr 0x109002AC): 0x00000707 slow_shift_reg_config (addr 0x109002B0): 0x0000813E slow_debounce_ctrl1 (addr 0x109002B8): 0x00000000 slow_debounce_ctrl0 (addr 0x109002BC): 0x00000000 slow_debounce_time5 (addr 0x109002C8): 0x00000000 slow_debounce_time4 (addr 0x109002CC): 0x00000000 slow_debounce_time3 (addr 0x10900211:05.695: EHWIC ESWGE I2C read error *Nov 21 16:11:06.375: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:06.375: EHWIC ESWGE I2C read error *Nov 21 16:11:06.455: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:06.455: EHWIC ESWGE I2C read error *Nov 21 16:11:06.611: %ESWGE_ERR-3-D0): 0x00000000 slow_debounce_time2 (addr 0x109002D4): 0x00000000 slow_debounce_time1 (addr 0x109002D8): 0x00000000 slow_debounce_time0 (addr 0x109002DC): 0x00000000 slow_func_type (addr 0x109002E0): 0x00000000 slow_intr_test1 (addr 0x109002E8): 0x00000000 slow_intr_test0 (addr 0x109002EC): 0x00000000 slow_fan_tach (addr 0x109002F0): 0xCMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:07.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:07.291: EHWIC ESWGE I2C read error *Nov 21 16:11:07.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:07.371: EHWIC ESWGE I2C read error *Nov 21 08080808 slow_ethernet_led_cfg (addr 0x109002F8): 0x00003307 slow_ethernet_led_en (addr 0x109002FC): 0x00000000 slow_intr_type3 (addr 0x10900300): 0xFFFFFFFF slow_intr_type2 (addr 0x10900304): 0xFFFFFFFF slow_intr_type1 (addr 0x10900308): 0xFFFFFFFF slow_intr_type0 (addr 0x1090030C): 0xFFFFFFFF slow_err_intr_event1 (addr 0x10900310): 0x000000016:11:08.183: EHWIC ESWGE I2C read error *Nov 21 16:11:08.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:08.387: EHWIC ESWGE I2C read error *Nov 21 16:11:08.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:09.1470 slow_err_intr_event0 (addr 0x10900314): 0x00000000 slow_mgmt_intr_event1 (addr 0x10900318): 0x00000000 slow_mgmt_intr_event0 (addr 0x1090031C): 0x00000000 slow_ntwk_intr_event1 : %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10900320): 0x00000000 slow_ntwk_intr_event0 (addr 0x10900324): 0x00000000 slow_err_intr_enable1 (addr 0x10900328): 0x00000000 slow_err_intr_enable0 (addr 0x1090032C): 0x00000000 sl *Nov 21 16:11:09.147: EHWIC ESWGE I2C read error *Nov 21 16:11:09.227: EHWIC ESWGE I2C read error *Nov 21 16:11:09.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:09.907: EHWIC ESWGE I2C read error *Nov 21 16:11:09.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue isow_mgmt_intr_enable1 (addr 0x10900330): 0x00000000 slow_mgmt_intr_enable0 (addr 0x10900334): 0x00000000 slow_ntwk_intr_enable1 (addr 0x10900338): 0x00000000 slow_ntwk_intr_enable0 (ad Full, I2C cmd Read fail at in slot 1dr 0x1090033C): 0x00000000 slow_output_polarity_ctrl1 (addr 0x10900340): 0x00000000 slow_output_polarity_ctrl0 (addr 0x10900344): 0x00000000 slow_input_polarity_ctrl1 (addr 0x10900348): 0x00000000 slow_inpu *Nov 21 16:11:09.987: EHWIC ESWGE I2C read error *Nov 21 16:11:10.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:10.667: EHWIC ESWGE I2C read error *Nov 21 16:11:10.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16t_polarity_ctrl0 (addr 0x1090034C): 0x00000000 io-controller hdlc 0 (addr 0x10800000): h_status (addr 0x10800000): 0x00000000 h_edtbar (addr 0x10800004): 0x0D757000 h_idtbar (addr 0x10800008): 0x0D759000 h_cer (addr 0x1080000C): 0x00000000 h_edavnr (addr 0x10800010): 0x00000000 h_ebrr (addr :11:10.747: EHWIC ESWGE I2C read error *Nov 21 16:11:10.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:11.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:11.507: EHWIC ESWGE I2C read error *Nov 21 16:11:11.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10x10800014): 0x00000000 h_ipqnr (addr 0x10800018): 0x00000000 h_eer (addr 0x1080001C): 0x00000000 h_ier (addr 0x10800020): 0x00000000 h_ilur (addr 0x10800024): 0x00000000 ca_cr (addr 0x10800028): 0x00000000 h_ccr (addr 0x1080002C): 0x00000000 h_ctrl (addr 0x10800 *Nov 21 16:11:11.587: EHWIC ESWGE I2C read error *Nov 21 16:11:12.303: EHWIC ESWGE I2C read error *Nov 21 16:11:12.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:12.567: EHWIC ESWGE I2C read error *Nov 21 16:11:12.647: %ESWGE_ERR-3-CMDQ_FULL: Command queue 030): 0x0000006F h_imfsr (addr 0x10800034): 0x0000FFFF h_ifser (addr 0x10800038): 0x00000000 h_tdmcr (addr 0x1080003C): 0x0000001B dbg_buf_addr (addr 0x10800100): 0x00000000 dbg_data_lower (addr 0x10800104): 0x00000000 dbg_data_upper (addr 0x10800108): 0x00000000 h_frm_cnt (addr 0x1080010C): 0is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:13.327: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:13.327: EHWIC ESWGE I2C read error *Nov 21 16:11:13.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:13.407: EHWIC ESWGE I2C read error *Nov 21 16:11:14.087: %ESWGE_ERR-x00000000 h_mem_pesr (addr 0x10800110): 0x00000000 h_mem_pecr (addr 0x10800114): 0x0000000F h_emem_buf_pear (addr 0x10800118): 0x00000007 h_imem_buf_pear (addr 0x1080011C): 0x000000C7 h_echn_am_pear 3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10800120): 0x00000018 h_ichn_am_pear (addr 0x10800124): 0x0000007C h_parerr_inject (addr 0x10800128): 0x000000 *Nov 21 16:11:14.087: EHWIC ESWGE I2C read error *Nov 21 16:11:14.167: EHWIC ESWGE I2C read error *Nov 21 16:11:14.847: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:14.847: EHWIC ESWGE I2C read error *Nov 21 16:11:14.927: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:14.927: E00 h_sti_buserr_sts (addr 0x10800200): 0x00000000 h_sti_buserr_ctl (addr 0x10800204): 0x0000007F hdlc_ca_lh (addr 0x10800400 - 0x108005FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ..........HWIC ESWGE I2C read error *Nov 21 16:11:15.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:15.687: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:15.687: EHWIC ESWGE I2C read error *Nov 21 16:11:15.767: %ESWGE_ERR-3-...... 80: 00000000 00000000 00000000 00000000 .........CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1....... 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 . *Nov 21 16:11:15.767: EHWIC ESWGE I2C read error *Nov 21 16:11:16.447: EHWIC ESWGE I2C read error *Nov 21 16:11:16.603: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:16.603: EHWIC ESWGE I2C read error *Nov 21 16:11:16.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue ............... 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:17.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read failC cmd Read fail at in slot 1 at in slot 1 *Nov 21 16:11:17.363: EHWIC ESWGE I2C read error *Nov 21 16:11:17.443: EHWIC ESWGE I2C read error *Nov 21 16:11:18.123: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00 *Nov 21 16:11:18.123: EHWIC ESWGE I2C read error *Nov 21 16:11:18.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:18.203: EHWIC ESWGE I2C read error *Nov 21 16:11:18.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:18.883: EHWIC ESWGE I2C read error *Nov 21 16:11:18.963: %E000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: SWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 hdlc_ca_uh (addr 0x10800600 - 0x108007FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 000 *Nov 21 16:11:18.963: EHWIC ESWGE I2C read error *Nov 21 16:11:19.043: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:19.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:19.723: EHWIC ESWGE I2C read error *Nov 21 1600000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 0:11:19.803: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 *Nov 21 16:11:19.803: EHWIC ESWGE I2C read error 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 000 *Nov 21 16:11:20.583: EHWIC ESWGE I2C read error *Nov 21 16:11:20.663: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:20.663: EHWIC ESWGE I2C read error *Nov 21 16:11:20.743: %ESWGE_ERR-3-CMDQ_FULL: Com00000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 000mand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:21.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:21.423: EHWIC ESWGE I2C read error *Nov 21 16:11:21.575: EHWIC ESWGE I2C read error *Nov 21 16:11:22.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:22.259: EHWIC ESWGE I2C read error 00000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 000 *Nov 21 16:11:22.339: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:22.339: EHWIC ESWGE I2C read error *Nov 21 16:11:23.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:23.019: EHWIC ESWGE I2C read error *Nov 21 1600000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: io-controller hdlc 1 (addr 0x10810000): h_status :11:23.099: EHWIC ESWGE I2C read error *Nov 21 16:11:23.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:23.959: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:23.959: EHWIC ESWGE I2C read error *Nov 21 16:11:24.039: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail (addr 0x10810000): 0x00000000 h_edtbar (addr 0x10810004): 0x0D75B000 h_idtbar (addr 0x10810008): 0x0D75D000 hat in slot 1_cer (addr 0x1081000C): 0x00000000 h_edavnr (addr 0x10810010): *Nov 21 16:11:24.039: EHWIC ESWGE I2C read error 0x00000000 h_ebrr (addr 0x10810014): 0x00000000 h_ipqnr (addr 0x10810018): 0x00000000 h_eer *Nov 21 16:11:24.719: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:24.719: EHWIC ESWGE I2C read error *Nov 21 16:11:24.799: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:24.799: EHWIC ESWGE I2C read error *Nov 21 16: (addr 0x1081001C): 0x00000000 h_ier (addr 0x10810020): 0x00000000 h_ilur (addr 0x10810024): 0x00000000 ca_cr (addr 0x10810028): 0x00000000 h_ccr (addr 0x1081002C): 0x00000000 h_ctrl (addr 0x10810030): 0x0000006F h_imfsr (addr 0x10810034): 0x0000FFFF h_ifser 11:24.879: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:25.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:25.699: EHWIC ESWGE I2C read error *Nov 21 16:11:25.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:25.779: EHWIC ESWGE I2 (addr 0x10810038): 0x00000000 h_tdmcr C read error (addr 0x1081003C): 0x0000001B dbg_buf_addr (addr 0x10810100): 0x00000000 dbg_data_lower (addr 0x10810104): 0x00000000 dbg_data_upper (addr 0x10810108): 0x00000000 h_frm_cnt (addr 0x1081010C): 0x00000000 h_mem_pesr (addr 0x10810110): 0x00000000 h_mem_pecr (addr *Nov 21 16:11:26.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:26.459: EHWIC ESWGE I2C read error *Nov 21 16:11:26.539: EHWIC ESWGE I2C read error *Nov 21 16:11:27.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:27.219: EHWIC ESWGE I2C read error *Nov 21 16:11:27.299: 0x10810114): 0x0000000F h_emem_buf_pear (addr 0x10810118): 0x00000007 h_imem_buf_pear (addr 0x1081011C): 0x000000E7 h_echn_am_pear (addr 0x10810120): 0x00000004 h_ichn_am_pear (addr 0x10810124): 0x0000007C h_parerr_inject (addr 0x10810128): 0x00000000 h_sti_buserr_sts (addr 0x10810200): 0x00000000 h_sti_buserr_ctl (addr 0x10810EHWIC ESWGE I2C read error *Nov 21 16:11:27.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:28.139: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:28.139: EHWIC ESWGE I2C read error *Nov 21 16:11:28.219: %ESWGE_ERR-204): 0x0000007F hdlc_ca_lh (addr 0x10810400 - 0x108105FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ...............3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1. 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 .......... *Nov 21 16:11:28.219: EHWIC ESWGE I2C read error *Nov 21 16:11:28.899: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:28.899: EHWIC ESWGE I2C read error *Nov 21 16:11:28.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:28.979: EHWIC ESWGE I2C read error *Nov 21 16:11:29.107: %E...... 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 .SWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:29.787: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:29.787: EHWIC ESWGE I2C read error *Nov 21 16:11:29.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 ...............9.867: EHWIC ESWGE I2C read error 240: 00000000 00000000 00000000 00000000 . ............... 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00 *Nov 21 16:11:30.547: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:30.547: EHWIC ESWGE I2C read error *Nov 21 16:11:30.735: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:30.735: EHWIC ESWGE I2C read error *Nov 21 16:11:31.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00 Read fail at in slot 1 *Nov 21 16:11:31.415: EHWIC ESWGE I2C read error *Nov 21 16:11:31.643: EHWIC ESWGE I2C read error *Nov 21 16:11:31.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:32.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: hdlc_ca_uh (addr 0x10810600 - 0x108107FF): 0: 00000000 00000000 00000000 00000000 at in slot 1 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 000000 *Nov 21 16:11:32.531: EHWIC ESWGE I2C read error 00 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 000 *Nov 21 16:11:32.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:32.611: EHWIC ESWGE I2C read error *Nov 21 16:11:33.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:33.291: EHWIC ESWGE I2C read error *Nov 21 16:11:33.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c00000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 000md Read fail at in slot 1 *Nov 21 16:11:33.371: EHWIC ESWGE I2C read error *Nov 21 16:11:33.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:34.175: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:34.175: EHWIC ESWGE I2C read error *Nov 21 16:11:34.255: %ESWGE_ERR-3-CMDQ_FULL: Com00000 00000000 ................ 208: 00000000 00000000 00mand queue is Full, I2C cmd Read fail at in slot 1000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 000 *Nov 21 16:11:34.255: EHWIC ESWGE I2C read error *Nov 21 16:11:34.935: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:34.935: EHWIC ESWGE I2C read error *Nov 21 16:11:35.015: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:00000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00011:35.015: EHWIC ESWGE I2C read error *Nov 21 16:11:35.711: EHWIC ESWGE I2C read error *Nov 21 16:11:35.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:35.915: EHWIC ESWGE I2C read error *Nov 21 16:11:35.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:36.675: %ESWGE_ERR-3-CM00000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: io-controller hdlc 2 (addr 0x10820000): h_status (addr 0x10820000): 0x00000000 h_edtbar (addr 0x10820004): 0x0D75F000 h_idtbar DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:36.675: EHWIC ESWGE I2C read error *Nov 21 16:11:36.755: EHWIC ESWGE I2C read error *Nov 21 16:11:37.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:37.435: EHWIC ESWGE I2C read error (addr 0x10820008): 0x0D761000 h_cer (addr 0x1082000C): 0x00000000 h_edavnr (addr 0x10820010): 0x00000000 h_ebrr (addr 0x10820014): 0x00000000 h_ipqnr (addr 0x10820018): 0x00000000 h_eer (addr 0x1082001C): 0x00000000 h_ier (addr 0x10820020): 0x00000000 h_ilur *Nov 21 16:11:37.515: EHWIC ESWGE I2C read error *Nov 21 16:11:37.615: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:38.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:38.295: EHWIC ESWGE I2C read error *Nov 21 16:11:38.375: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c (addr 0x10820024): 0x00000000 ca_cr md Read fail at in slot 1 (addr 0x10820028): 0x00000000 h_ccr (addr 0x1082002C): 0x00000000 h_ctrl (addr 0x10820030): 0x0000006F h_imfsr (addr 0x10820034): 0x0000FFFF h_ifser (addr 0x10820038): 0x00000000 h_tdmcr (addr 0x1082003C): 0x0000001B dbg_buf_addr *Nov 21 16:11:38.375: EHWIC ESWGE I2C read error *Nov 21 16:11:39.055: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:39.055: EHWIC ESWGE I2C read error *Nov 21 16:11:39.135: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: (addr 0x10820100): 0x00000000 dbg_data_lower (addr 0x10820104): 0x00000000 dbg_data_upper (addr 0x10820108): 0x00000000 h_frm_cnt (addr 0x1082010C): 0x00000000 h_mem_pesr (addr 0x10820110): 0x00000000 h_mem_pecr (addr 0x10820114): 0x0000000F h_emem_buf_pear (addr 0x10820118): 0x00000007 h_imem_buf_pear 11:39.135: EHWIC ESWGE I2C read error *Nov 21 16:11:39.815: EHWIC ESWGE I2C read error *Nov 21 16:11:40.039: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:40.039: EHWIC ESWGE I2C read error *Nov 21 16:11:40.119: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:40.799: %ESWGE_ERR-3-CM (addr 0x1082011C): 0x000000BF h_echn_am_pear (addr 0x10820120): 0x00000004 h_ichn_am_pear (addr 0x10820124): 0x0000007C h_parerr_inject (addr 0x10820128): 0x00000000 h_sti_buserr_sts (addr 0x10820200): 0x00000000 h_sti_buserr_ctl (addr 0x10820204): 0x0000007F hdlc_ca_lh (addr 0x10820400 - 0x108205FF): 0: 00000000 00000000 00000000 00000000 ................ DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:40.799: EHWIC ESWGE I2C read error *Nov 21 16:11:40.879: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:40.879: EHWIC ESWGE I2C read error *Nov 21 16:11:41.559: %ESWGE_ERR-3-CMDQ_FULL: Com 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................mand queue is Full, I2C cmd Read fail at in slot 1 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 .......... *Nov 21 16:11:41.559: EHWIC ESWGE I2C read error *Nov 21 16:11:41.639: EHWIC ESWGE I2C read error *Nov 21 16:11:41.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:42.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16...... 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 .......:11:42.407: EHWIC ESWGE I2C read error ......... 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 . *Nov 21 16:11:42.487: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:42.487: EHWIC ESWGE I2C read error *Nov 21 16:11:43.167: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:43.167: EHWIC ESWGE I2C read error *Nov 21 16............... 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00:11:43.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:43.247: EHWIC ESWGE I2C read error *Nov 21 16:11:43.939: EHWIC ESWGE I2C read error *Nov 21 16:11:44.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:44.147: EHWIC ESWGE I2C read error *Nov 21 16:11:44.227: %ESWGE_ERR-3-000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:44.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:44.907: EHWIC ESWGE I2C read error *Nov 21 16:11:44.987: EHWIC ESWGE I2C read error *Nov 21 16:11:45.667: %ESWGE_ERR-3-CMDQ_FULL: hdlc_ca_uh (addr 0x10820600 - 0x108207FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 Command queue is Full, I2C cmd Read fail at in slot 1 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 000 *Nov 21 16:11:45.667: EHWIC ESWGE I2C read error *Nov 21 16:11:45.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:45.747: EHWIC ESWGE I2C read error *Nov 21 16:11:45.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:00000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 0000000011:46.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 000 *Nov 21 16:11:46.571: EHWIC ESWGE I2C read error *Nov 21 16:11:46.651: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:46.651: EHWIC ESWGE I2C read error *Nov 21 16:11:47.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1600000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 000:11:47.331: EHWIC ESWGE I2C read error *Nov 21 16:11:47.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:47.411: EHWIC ESWGE I2C read error *Nov 21 16:11:48.091: EHWIC ESWGE I2C read error *Nov 21 16:11:48.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C 00000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 000cmd Read fail at in slot 1 *Nov 21 16:11:48.171: EHWIC ESWGE I2C read error *Nov 21 16:11:48.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:48.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmr d Read fail at in slot 1 *Nov 21 16:11:48.931: EHWIC ESWGE I2C read error *Nov 21 16:11:49.011: EHWIC ESWGE I2C read erro00000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: io-controller hdlc 3 (addr 0x10830000): h_status (addr 0x10830000): 0x00000000 h_edtbar (addr 0x10830004): 0x0D763000 h_idtbar (addr 0x10830008): 0x0D765000 h_cer (addr 0x1083000C): 0x00000000 *Nov 21 16:11:49.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:49.691: EHWIC ESWGE I2C read error *Nov 21 16:11:49.771: EHWIC ESWGE I2C read error *Nov 21 16:11:49.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:50.563: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd h_edavnr (addr 0x10830010): 0x00000000 h_ebrr (addr 0x10830014): 0x00000000 h_ipqnr (addr 0x10830018): 0x00000000 h_eer Read fail at in slot 1 (addr 0x1083001C): 0x00000000 h_ier (addr 0x10830020): 0x00000000 h_ilur (addr 0x10830024): 0x00000000 ca_cr (addr 0x10830028): 0x00000000 h_c *Nov 21 16:11:50.563: EHWIC ESWGE I2C read error *Nov 21 16:11:50.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:50.643: EHWIC ESWGE I2C read error *Nov 21 16:11:51.323: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16cr (addr 0x1083002C): 0x00000000 h_ctrl (addr 0x10830030): 0x0000006F h_imfsr (addr 0x10830034): 0x0000FFFF h_ifser (addr:11:51.323: EHWIC ESWGE I2C read error 0x10830038): 0x00000000 h_tdmcr (addr 0x1083003C): 0x0000001B dbg_buf_addr (addr 0x10830100): 0x00000000 dbg_data_lower (addr 0x10830104): 0x00000000 dbg_data_u *Nov 21 16:11:51.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:51.403: EHWIC ESWGE I2C read error *Nov 21 16:11:52.083: EHWIC ESWGE I2C read error *Nov 21 16:11:52.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:pper (addr 0x10830108): 0x00000000 h_frm_cnt (addr 0x1083010C): 0x00000000 h_mem_pesr (addr 0x10830110): 0x00000000 h_mem_pecr (addr 0x10830114): 0x0000000F h_emem_buf_pear (addr 0x10830118): 0x00000007 h_imem_buf_pear (addr 0x1083011C): 0x0000004F h_echn_am_pear (addr 0x10830120): 0x00000050 h_ichn_am_pear 11:52.163: EHWIC ESWGE I2C read error *Nov 21 16:11:52.243: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:52.923: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:52.923: EHWIC ESWGE I2C read error *Nov 21 16:11:53.099: EHWIC ESWGE I2C read error (addr 0x10830124): 0x0000007C h_parerr_inject (addr 0x10830128): 0x00000000 h_sti_buserr_sts (addr 0x10830200): 0x00000000 h_sti_buserr_ctl (addr 0x10830204): 0x0000007F hdlc_ca_lh (addr 0x10830400 - 0x108305FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ *Nov 21 16:11:53.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:53.779: EHWIC ESWGE I2C read error *Nov 21 16:11:53.859: EHWIC ESWGE I2C read error *Nov 21 16:11:54.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:54.703: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ..........cmd at in slot 1 Read fail at in slot 1 *Nov 21 16:11:54.703: EHWIC ESWGE I2C read error *Nov 21 16:11:54.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:54.783: EHWIC ESWGE I2C read error *Nov 21 16:11:55.463: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail ...... 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ....... *Nov 21 16:11:55.463: EHWIC ESWGE I2C read error ......... 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 . *Nov 21 16:11:55.543: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:55.543: EHWIC ESWGE I2C read error *Nov 21 16:11:56.223: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:56.223: EHWIC ESWGE I2C read error *Nov 21 16:1............... 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000001:56.303: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00 *Nov 21 16:11:56.303: EHWIC ESWGE I2C read error *Nov 21 16:11:56.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:11:57.163: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:57.163: EHWIC ESWGE I2C read error *Nov 21 1000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 06:11:57.243: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: hdlc_ca_uh (addr 0x10830600 - 0x108307FF): 0: 00000000 00000000 00000000 00000000 .. *Nov 21 16:11:57.243: EHWIC ESWGE I2C read error *Nov 21 16:11:57.923: EHWIC ESWGE I2C read error *Nov 21 16:11:58.147: EHWIC ESWGE I2C read error *Nov 21 16:11:58.227: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot .............. 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 0001 *Nov 21 16:11:58.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:58.907: EHWIC ESWGE I2C read error *Nov 21 16:11:58.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:58.987: EHWIC ESWGE I2C read error *Nov 21 16:11md Read fail at in slot 1:59.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c00000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 000 *Nov 21 16:11:59.667: EHWIC ESWGE I2C read error *Nov 21 16:11:59.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:11:59.747: EHWIC ESWGE I2C read error *Nov 21 16:12:00.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1600000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 000:12:00.427: EHWIC ESWGE I2C read error *Nov 21 16:12:00.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:00.507: EHWIC ESWGE I2C read error *Nov 21 16:12:00.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:01.323:00000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: *Nov 21 16:12:01.323: EHWIC ESWGE I2C read error *Nov 21 16:12:01.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:01.403: EHWIC ESWGE I2C read error *Nov 21 16:12:02.139: EHWIC ESWGE I2C read error *Nov 21 16:12:02.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue io-controller hdlc 4 (addr 0x10840000): h_status (addr 0x10840000): 0x00000000 h_edtbar (addr 0x10840004): 0x0D767000 h_idtbar is Full, I2C cmd Read fail at in slot 1 (addr 0x10840008): 0x0D769000 h_cer (addr 0x1084000C): 0x00000000 h_edavnr (addr 0x10840010): 0x00000000 h_ebrr (addr 0x1084001 *Nov 21 16:12:02.219: EHWIC ESWGE I2C read error *Nov 21 16:12:02.299: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:02.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:02.979: EHWIC ESWGE I2C read error *Nov 21 16:4): 0x00000000 h_ipqnr (addr 0x10840018): 0x00000000 h_eer (addr 0x1084001C): 0x00000000 h_ier 12:03.135: EHWIC ESWGE I2C read error (addr 0x10840020): 0x00000000 h_ilur (addr 0x10840024): 0x00000000 ca_cr (addr 0x10840028): 0x00000000 h_ccr (addr 0x1084002C): 0x00000000 h_ctrl (addr 0x10840030): 0x0 *Nov 21 16:12:03.815: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:03.815: EHWIC ESWGE I2C read error *Nov 21 16:12:03.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:03.895: EHWIC ESWGE I2C read error *Nov 21 16:000006F h_imfsr (addr 0x10840034): 0x0000FFFF h_ifser (addr 0x10840038): 0x00000000 h_tdmcr (addr 0x1084003C): 0x0000001B dbg_buf_addr (addr 0x10840100): 0x00000000 dbg_data_lower (addr 0x10840104): 0x00000000 dbg_data_upper (addr 0x10840108): 0x00000000 h_frm_cnt (addr 0x1084010C): 0x0000000012:04.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:04.575: EHWIC ESWGE I2C read error *Nov 21 16:12:04.655: EHWIC ESWGE I2C read error *Nov 21 16:12:04.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:05.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail h_mem_pesr (addr 0x10840110): 0x00000000 h_mem_pecr (addr 0x10840114): 0x0000000F h_emem_buf_pear (addr 0x10840118): 0x00000007 h_imem_buf_pear (addr 0x1084011C): 0x0000004F h_echn_am_pear (addr 0x10840120): 0x00000004 h_ichn_am_pear (addr 0x10840124): 0x0000007C h_parerr_inject (addr 0x10840128): 0x00000000 h_s at in slot 1 *Nov 21 16:12:05.459: EHWIC ESWGE I2C read error *Nov 21 16:12:05.539: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:05.539: EHWIC ESWGE I2C read error *Nov 21 16:12:06.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 ti_buserr_sts (addr 0x10840200): 0x00000000 h_sti_buserr_ctl (addr 0x10840204): 0x0000007F hdlc_ca_lh (addr 0x10840400 - 0x108405FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ *Nov 21 16:12:06.219: EHWIC ESWGE I2C read error 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ *Nov 21 16:12:06.299: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:06.299: EHWIC ESWGE I2C read error *Nov 21 16:12:06.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:07.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:07.203: EH 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ WIC ESWGE I2C read error000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ *Nov 21 16:12:07.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 .......... *Nov 21 16:12:07.283: EHWIC ESWGE I2C read error *Nov 21 16:12:07.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:07.963: EHWIC ESWGE I2C read error *Nov 21 16:12:08.183: EHWIC ESWGE I2C read error *Nov 21 16:12:08.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is...... 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 . Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:08.863: EHWIC ESWGE I2C read error *Nov 21 16:12:08.943: EHWIC ESWGE I2C read error *Nov 21 16:12:09.167: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:09.847: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:09.847: EHWIC ESWGE I2C re............... 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00ad error *Nov 21 16:12:09.927: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:09.927: EHWIC ESWGE I2C read error *Nov 21 16:12:10.607: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:10.607: EHWIC ESWGE I2C read error *Nov 21 16:12:10.687: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Fu000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: hdlc_ca_uh (addr 0x10840600 - 0x108407FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ..ll, I2C cmd Read fail at in slot 1 *Nov 21 16:12:10.687: EHWIC ESWGE I2C read error *Nov 21 16:12:10.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:11.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:11.491: EHWIC.............. 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ESWGE I2C read error ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 000000 *Nov 21 16:12:11.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 000 *Nov 21 16:12:11.571: EHWIC ESWGE I2C read error *Nov 21 16:12:12.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:12.251: EHWIC ESWGE I2C read error *Nov 21 16:12:12.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:12.331: EHWIC ESWGE I2C read error *Nov 21 16:12:13.171: 00000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 000EHWIC ESWGE I2C read error *Nov 21 16:12:13.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:13.251: EHWIC ESWGE I2C read error *Nov 21 16:12:13.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:14.011: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot00000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 000 1 *Nov 21 16:12:14.011: EHWIC ESWGE I2C read error *Nov 21 16:12:14.171: EHWIC ESWGE I2C read error *Nov 21 16:12:14.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:14.851: EHWIC ESWGE I2C read error *Nov 21 16:12:14.931: EHWIC ESWGE I2C read error *Nov 21 16:12:15.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I200000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: io-controller hdlc 5 (addr 0x10850000): h_status C cmd Write fail at in slot 1 *Nov 21 16:12:15.775: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:15.775: EHWIC ESWGE I2C read error *Nov 21 16:12:15.855: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:15.855: EHWIC ESWG (addr 0x10850000): 0x00000000 h_edtbar (addr 0x10850004): 0x0D76B000 h_idtbar (addr 0x10850008): 0x0D76D000 h_cer (addr 0x1085000C): 0x00000000 h_eE I2C read error davnr (addr 0x10850010): 0x00000000 *Nov 21 16:12:16.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 h_ebrr (addr 0x10850014): 0x00000000 h_ipqnr (addr 0x10850018): 0x00000000 h_eer ( *Nov 21 16:12:16.535: EHWIC ESWGE I2C read error *Nov 21 16:12:16.615: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:16.615: EHWIC ESWGE I2C read error *Nov 21 16:12:17.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:addr 0x1085001C): 0x00000000 h_ier (addr 0x10850020): 0x00000000 h_ilur (addr 0x10850024): 0x00000000 ca_cr (addr 0x10850028): 0x00000000 h_ccr (addr 0x1085002C): 0x00000000 h_ctrl (addr 0x10850030): 0x0000006F h_imfsr (addr 0x10850034): 0x0000FFFF h_ifser (addr 0x17.295: EHWIC ESWGE I2C read error *Nov 21 16:12:17.375: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:17.375: EHWIC ESWGE I2C read error *Nov 21 16:12:17.455: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:18.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail a10850038): 0x00000000 h_tdmcr (addr 0x1085003C): 0x0000001B dbg_buf_addr (addr 0x10850100): 0x00000000 dbg_data_lower (addr 0x10850104): 0x00000000 dbg_data_upper (addr 0x10850108): 0x00000000 h_frm_cnt (addr 0x1085010C): 0x00000000 h_mem_pesr (addr 0x10850110): 0x00000000 h_mem_pecr (addr 0x1085011t in slot 1 *Nov 21 16:12:18.235: EHWIC ESWGE I2C read error *Nov 21 16:12:18.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:18.315: EHWIC ESWGE I2C read error *Nov 21 16:12:18.995: EHWIC ESWGE I2C read error *Nov 21 16:12:19.147: EHWIC ESWGE I2C read error *Nov 21 16:12:19.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue i4): 0x0000000F h_emem_buf_pear (addr 0x10850118): 0x00000007 h_imem_buf_pear (addr 0x1085011C): 0x000000F7 h_echn_am_pear (addr 0x10850120): 0x0000002C h_ichn_am_pear (addr 0x10850124): 0x0000007C h_parerr_inject (addr 0x10850128): 0x00000000 h_sti_buserr_sts (addr 0x10850200): 0x00000000 h_sti_buserr_ctl (addr 0x10850204): 0x0s Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:20.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:20.091: EHWIC ESWGE I2C read error *Nov 21 16:12:20.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:20.171: 000007F hdlc_ca_lh (addr 0x10850400 - 0x108505FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 4EHWIC ESWGE I2C read error 8: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ *Nov 21 16:12:20.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ *Nov 21 16:12:20.851: EHWIC ESWGE I2C read error *Nov 21 16:12:20.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:20.931: EHWIC ESWGE I2C read error *Nov 21 16:12:21.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:21.611: EHWIC ESWGE I2C read error *Nov 21 16:12:21.691: % 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ..........ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:21.691: EHWIC ESWGE I2C read error *Nov 21 16:12:21.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:22.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:22.451: EHWIC ESWGE I2C read error...... 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 . *Nov 21 16:12:22.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:22.531: EHWIC ESWGE I2C read error *Nov 21 16:12:23.211: EHWIC ESWGE I2C read error *Nov 21 16:12:23.327: EHWIC ESWGE I2C read error *Nov 21 16:12:23.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:24.27............... 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 001: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:24.271: EHWIC ESWGE I2C read error *Nov 21 16:12:24.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:24.351: EHWIC ESWGE I2C read error *Nov 21 16:12:25.031: %ESWGE_ER000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: hdlc_ca_uh (addr 0x10850600 - 0x108507FF): 0: 00000000 00000000 00000000 00000000 ........R-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1........ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 .. *Nov 21 16:12:25.031: EHWIC ESWGE I2C read error *Nov 21 16:12:25.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:25.111: EHWIC ESWGE I2C read error *Nov 21 16:12:25.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:.............. 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00012:25.791: EHWIC ESWGE I2C read error *Nov 21 16:12:25.871: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:25.871: EHWIC ESWGE I2C read error *Nov 21 16:12:25.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:26.631: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai00000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 000l at in slot 1 *Nov 21 16:12:26.631: EHWIC ESWGE I2C read error *Nov 21 16:12:26.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:26.711: E 1HWIC ESWGE I2C read error *Nov 21 16:12:27.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot00000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 000 *Nov 21 16:12:27.391: EHWIC ESWGE I2C read error *Nov 21 16:12:27.495: EHWIC ESWGE I2C read error *Nov 21 16:12:27.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:28.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:28.371: EHWIC ESWGE I2C read error *Nov 21 16:12:28.451: 00000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: io-controller hd%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1lc 6 (addr 0x10860000): h_status (addr 0x10860000): 0x00000000 h_edtbar (addr 0x10860004): 0x0D76F000 h_idtbar *Nov 21 16:12:28.451: EHWIC ESWGE I2C read error *Nov 21 16:12:29.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:29.131: EHWIC ESWGE I2C read error *Nov 21 16:12:29.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: (addr 0x10860008): 0x0D771000 h_cer (addr 0x1086000C): 0x00000000 h_edavnr (addr 0x10860010): 0x00000000 h_ebrr (addr 0x10860014): 0x00000000 h_ipqnr (addr 0x10860018): 0x00000000 h_eer (addr 0x1086001C): 0x00000000 h_ier (addr 0x10860020): 0x00000000 h_ilur 12:29.211: EHWIC ESWGE I2C read error *Nov 21 16:12:29.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:29.891: EHWIC ESWGE I2C read error *Nov 21 16:12:29.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:29.971: EHWIC ESWGE I2C read error *Nov 21 16:12:30.051: %ESWGE_ERR-3-CMD (addr 0x10860024): 0x00000000 ca_cr (addr 0x10860028): 0x00000000 h_ccr (addr 0x1086002C): 0x00000000 h_ctrl (addr 0x10860030): 0x0000006F h_imfsr (addr 0x10860034): 0x0000FFFF h_ifser (addr 0x10860038): 0x00000000 h_tdmcr (addr 0x1086003C): 0x0000001B dbg_buf_addr Q_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:30.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:30.731: EHWIC ESWGE I2C read error *Nov 21 16:12:30.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:30.811: EHWIC ESWGE I2C read error *Nov 21 16:1 (addr 0x10860100): 0x00000000 dbg_data_lower (addr 0x10860104): 0x00000000 dbg_data_upper (addr 0x10860108): 0x00000000 h_frm_cnt (addr 0x1086010C): 0x00000000 h_mem_pesr (addr 0x10860110): 0x00000000 h_mem_pecr (addr 0x10860114): 0x0000000F h_emem_buf_pear (addr 0x10860118): 0x00000007 h_imem_buf_pear (2:31.491: EHWIC ESWGE I2C read error *Nov 21 16:12:31.603: EHWIC ESWGE I2C read error *Nov 21 16:12:31.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:32.547: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:32.547: Eaddr 0x1086011C): 0x00000037 h_echn_am_pear (addr 0x10860120): 0x00000034 h_ichn_am_pear (addr 0x10860124): 0x00000044 h_parerr_inject (addr 0x10860128): 0x00000000 h_sti_buseHWIC ESWGE I2C read error rr_sts (addr 0x10860200): 0x00000000 h_st *Nov 21 16:12:32.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1i_buserr_ctl (addr 0x10860204): 0x0000007F hdlc_ca_lh (addr 0x10860400 - 0x108605FF): 0: 00000000 00000000 00000000 00000000 ................ 16: *Nov 21 16:12:32.627: EHWIC ESWGE I2C read error *Nov 21 16:12:33.307: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:33.307: EHWIC ESWGE I2C read error *Nov 21 16:12:33.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 33.387: EHWIC ESWGE I2C read error *Nov 21 16:12:34.067: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:34.067: EHWIC ESWGE I2C read error *Nov 21 16:12:34.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:34.147: EHWIC ESWGE I2C read error *Nov 21 16:12:34.227: %ESWGE_ERR-3-CMD 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ..........Q_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:34.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:34.907: EHWIC ESWGE I2C read error *Nov 21 16:12:34.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:34.987: EHWIC ESWGE I2C read error *Nov 21 16:12...... 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 .:35.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:35.667: EHWIC ESWGE I2C read error *Nov 21 16:12:35.831: EHWIC ESWGE I2C read error *Nov 21 16:12:35.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:36.591: %E............... 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 0000000SWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: *Nov 21 16:12:36.591: EHWIC ESWGE I2C read error *Nov 21 16:12:36.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:36.671: EHWIC ESWGE I2C read error *Nov 21 16:12:37.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 hdlc_ca_uh (addr 0x10860600 - 0x108607FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ........:12:37.351: EHWIC ESWGE I2C read error ........ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 .. *Nov 21 16:12:37.431: EHWIC ESWGE I2C read error *Nov 21 16:12:38.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:38.111: EHWIC ESWGE I2C read error *Nov 21 16:12:38.191: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:.............. 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000 ................ 224: 00000000 00000000 00000000 00012:38.191: EHWIC ESWGE I2C read error *Nov 21 16:12:38.323: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:39.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:39.003: EHWIC ESWGE I2C read error *Nov 21 16:12:39.083: %ESWat in slot 1GE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 00000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 000 *Nov 21 16:12:39.083: EHWIC ESWGE I2C read error *Nov 21 16:12:39.763: EHWIC ESWGE I2C read error *Nov 21 16:12:39.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:39.951: EHWIC ESWGE I2C read error *Nov 21 16:12:40.031: %ESWGE_ERR-3-CMDQ_FULL: Command queue 00000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 000is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:40.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:40.711: EHWIC ESWGE I2C read error *Nov 21 16:12:40.791: EHWIC ESWGE I2C read error *Nov 21 16:12:41.471: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:41.471: EHWIC ESWGE00000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: io-controller hdlc 7 (addr 0x10870000): h_status I2C read error (addr 0x10870000): 0x00000000 h_edtbar (addr 0x10870004): 0x0D773000 h_idtbar (addr 0x10870008): 0x0D775000 h_cer (addr 0x1087000C): 0x00000000 h_eda *Nov 21 16:12:41.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:41.551: EHWIC ESWGE I2C read error *Nov 21 16:12:42.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:42.231: EHWIC ESWGE I2C read error *Nov 21 16vnr (addr 0x10870010): 0x00000000 h_ebrr (addr 0x10870014): 0x00000000 h_ipqnr (addr 0x108700:12:42.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 118): 0x00000000 h_eer (addr 0x1087001C): 0x00000000 h_ier (addr 0x10870020): 0x00000000 h_ilur (addr 0x10870024): 0x00000000 ca_cr (addr 0x10870028): 0x00000000 h_ccr *Nov 21 16:12:42.311: EHWIC ESWGE I2C read error *Nov 21 16:12:42.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:43.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot (addr 0x1087002C): 0x00000000 h_ctrl (addr 0x10870030): 0x0000006F1 h_imfsr (addr 0x10870034): 0x0000FFFF h_ifser (addr 0x108700 *Nov 21 16:12:43.071: EHWIC ESWGE I2C read error 38): 0x00000000 h_tdmcr (addr 0x1087003C): 0x0000001B dbg_buf_addr (addr 0x10870100): 0x00000000 dbg_data_lower (addr 0x10870104): 0x00000000 dbg_data_upper *Nov 21 16:12:43.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:43.151: EHWIC ESWGE I2C read error *Nov 21 16:12:43.871: EHWIC ESWGE I2C read error *Nov 21 16:12:44.067: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1 (addr 0x10870108): 0x00000000 h_frm_cnt (addr 0x1087010C): 0x00000000 h_mem_pesr (addr 0x10870110): 0x00000000 h_mem_pecr (addr 0x10870114): 0x0000000F h_emem_buf_pear (addr 0x10870118): 0x00000007 h_imem_buf_pear (addr 0x1087011C): 0x000000FF h_echn_am_pear (addr 0x10870120): 0x00000004 h_ichn_am_pear 2:44.067: EHWIC ESWGE I2C read error *Nov 21 16:12:44.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:44.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:44.827: EHWIC ESWGE I2C read error *Nov 21 16:12:44.907: EHWIC ESWGE I2C read error *Nov 21 16:12:45.587: %ESWGE_ERR-3- (addr 0x10870124): 0x00000070 h_parerr_inject (addr 0x10870128): 0x00000000 h_sti_buserr_sts (addr 0x10870200): 0x00000000 h_sti_buserr_ctl (addr 0x10870204): 0x0000007F hdlc_ca_lh (addr 0x10870400 - 0x108705FF): 0: 00000000 00000000 00000000 00000000 ................ 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:45.587: EHWIC ESWGE I2C read error *Nov 21 16:12:45.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:45.667: EHWIC ESWGE I2C read error *Nov 21 16:12:46.347: %ESWGE_ERR-3-CMDQ_FULL: Co00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ................ 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ mmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:46.347: EHWIC ESWGE I2C read error *Nov 21 16:12:46.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:46.427: EHWIC ESWGE I2C read error *Nov 21 16:12:46.507: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:47.187: 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 00000000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 .......... *Nov 21 16:12:47.187: EHWIC ESWGE I2C read error *Nov 21 16:12:47.267: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:47.267: EHWIC ESWGE I2C read error *Nov 21 16:12:48.035: EHWIC ESWGE I2C read error ...... 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00000000 00000000 ................ 400: 00000000 00000000 00000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 . *Nov 21 16:12:48.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:48.115: EHWIC ESWGE I2C read error *Nov 21 16:12:48.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:48.875: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:48.875: EHWIC ESWGE I2C read error ............... 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: hdlc_ca_uh (addr 0x10870600 - 0x108707FF): 0: 00000000 00000000 00000000 00000000 ........... *Nov 21 16:12:49.035: EHWIC ESWGE I2C read error *Nov 21 16:12:49.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:49.715: EHWIC ESWGE I2C read error *Nov 21 16:12:49.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:..... 16: 00000000 00000000 00000000 00000000 ................ 32: 00000000 00000000 00000000 00000000 ................ 48: 00000000 00000000 00000000 00000000 ................ 64: 00000000 00000000 00000000 00000000 ................ 80: 00000000 00000000 00000000 00000000 ................ 96: 00000000 00000000 00000000 00000000 ................ 112: 00000000 00000000 00000000 00000000 ................ 128: 00000000 00000000 00000000 00000000 ..12:49.795: EHWIC ESWGE I2C read error *Nov 21 16:12:50.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:50.475: EHWIC ESWGE I2C read error *Nov 21 16:12:50.555: EHWIC ESWGE I2C read error *Nov 21 16:12:50.663: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:51.343: %ESWGE_ERR-3-.............. 144: 00000000 00000000 00000000 00000000 ................ 160: 00000000 00000000 00000000 00000000 ................ 176: 00000000 00000000 00000000 00000000 ................ 192: 00000000 00000000 00000000 00000000 ................ 208: 00000000 00000000 00000000 00000000CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 ................ 224: 00000000 00000000 00000000 00000000 ................ 240: 00000000 00000000 00000000 00000000 ................ 256: 00000000 00000000 00000000 000 *Nov 21 16:12:51.343: EHWIC ESWGE I2C read error *Nov 21 16:12:51.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:51.423: EHWIC ESWGE I2C read error *Nov 21 16:12:52.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:00000 ................ 272: 00000000 00000000 00000000 00000000 ................ 288: 00000000 00000000 00000000 00000000 ................ 304: 00000000 00000000 00000000 00000000 ................ 320: 00000000 00000000 00000000 00000000 ................ 336: 00000000 00000000 00000000 00000000 ................ 352: 00000000 00000000 00000000 00000000 ................ 368: 00000000 00000000 00000000 00000000 ................ 384: 00000000 00000000 00012:52.103: EHWIC ESWGE I2C read error *Nov 21 16:12:52.183: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:52.183: EHWIC ESWGE I2C read error *Nov 21 16:12:52.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:53.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 00000 00000000 ................ 400: 00000000 00000000 00at in slot 1000000 00000000 ................ 416: 00000000 00000000 00000000 00000000 ................ 432: 00000000 00000000 00000000 00000000 ................ 448: 00000000 00000000 00000000 00000000 ................ 464: 00000000 00000000 00000000 00000000 ................ 480: 00000000 00000000 00000000 00000000 ................ 496: 00000000 00000000 00000000 00000000 ................ 512: *Nov 21 16:12:53.027: EHWIC ESWGE I2C read error *Nov 21 16:12:53.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:53.107: EHWIC ESWGE I2C read error *Nov 21 16:12:53.787: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:53.787: EHWIC ESWGE I2C read error *Nov 21 16:12:54.007: Device Node 0 io-controller hsib (addr 0x10FF0000): dn_ctrl (addr 0x10FF0000): 0x00000027 dn_initiator_thlv (addr 0x10FF0004): 0x00080808 dn_target_thlv (addr 0x10FF0008): 0x00080808 dn_status (addr 0x10FF000C): 0x00000002 dn_initiator_error (addr 0x10FF0010): 0x00000000 dn_target_error (addr 0xEHWIC ESWGE I2C read error *Nov 21 16:12:54.687: EHWIC ESWGE I2C read error *Nov 21 16:12:54.815: EHWIC ESWGE I2C read error *Nov 21 16:12:55.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:55.703: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read 10FF0014): 0x00000000 dn_initiator_error_mask (addr 0x10FF0018): 0x00000000 dn_target_error_mask (addr 0x10FF001C): 0x00000000 dn_node_id (addr 0x10FF0020): 0x00000000 dn_target_online (addr 0x10FF0024): 0x000000FF dn_first_error_hsib_hdr (addr 0x10FF0028): 0x00000000 fail at in slot 1 dn_first_error_address (addr 0x10FF002C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF003 *Nov 21 16:12:55.703: EHWIC ESWGE I2C read error *Nov 21 16:12:55.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:55.783: EHWIC ESWGE I2C read error *Nov 21 16:12:56.463: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:56.463: EHWIC ESWGE I2C read error *Nov 21 16:12:56.543: 0): 0x00000000 dn_first_error_address (addr 0x10FF0034): 0x00000000 dn_aux_ctrl (addr 0x10FF0050): 0x00000329 dn_timeout_ctrl (addr 0x10FF0054): 0x00000000 dn_timer (addr 0x10FF0058): 0x000BABAF hsib_no_lut_priority (addr 0x10FF005C): 0x00000000 LUT Entry 0 LUT (addr 0x10FF0060): lut_ctrl (addr 0x10FF0060): 0x80100040 base_limit %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:56.543: EHWIC ESWGE I2C read error *Nov 21 16:12:56.623: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:57.303: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10FF0064): 0x107F1000or LUT Entry 1 L UT (addr 0x10FF0068): lut_ctrl (addr 0x10FF0068): 0x80100080 base_limit (addr 0x10FF006C): 0x108F1080 LUT Entry 2 LUT (addr 0x10FF0070): lut_ctrl (addr 0x10FF0070): 0x80120020 base_limit (addr 0x10FF0074): 0x10951090 LUT Entry 3 LUT (addr 0x10FF0078): lut_ctrl (addr 0x10FF0078) *Nov 21 16:12:57.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:57.383: EHWIC ESWGE I2C read error *Nov 21 16:12:58.063: EHWIC ESWGE I2C read error *Nov 21 16:12:58.143: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:58.143: EHWIC ESWGE I2C read error *Nov 21 16:12:58.823: %: 0x80100040 base_limit (addr 0x10FF007C): 0x10FE10FE Device Node 1 io-controller hsib (addr 0x10FF1000): dn_ctrl (addr 0x10FF1000): 0x0000001B dn_initiator_thlv (addr 0x10FF1004): 0x00080404 dn_target_thlv (addr 0x10FF1008): 0x0004020E dn_status (addr 0x10FF100C): 0x00000000 dn_initiator_error (addr 0x10FF1010): 0x00000000 dn_targeESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:58.823: EHWIC ESWGE I2C read error *Nov 21 16:12:58.999: EHWIC ESWGE I2C read error *Nov 21 16:12:59.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:12:59.759: %ESWGE_ERR-3-CMt_error (addr 0x10FF1014): 0x00000000 dn_initiator_error_mask (addr 0x10FF1018): 0x00000000 dn_target_error_mask (addr 0x10FF101C): 0x00000000 dn_node_id (addr 0x10FF1020): 0x00000001 dn_target_online (addr 0x10FF1024): 0x000000FF dn_first_error_hsib_hdr DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10FF1028): 0x00000000 dn_first_error_address (addr 0x10FF102C): 0x00000000 dn_second_error *Nov 21 16:12:59.759: EHWIC ESWGE I2C read error *Nov 21 16:12:59.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:12:59.839: EHWIC ESWGE I2C read error *Nov 21 16:13:00.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:00.519: EHWIC ESWGE I2C read error *Nov 21 16:13:00.599: _hsib_hdr (addr 0x10FF1030): 0x00000000 dn_first_error_address (addr 0x10FF1034): 0x00000000 dn_aux_ctrl (addr 0x10FF1050): 0x0000032B dn_timeout_ctrl (addr 0x10FF1054): 0x00000000 dn_timer (addr 0x10FF1058): 0x00052681 hsib_no_lut_priority (addr 0x10FF105C): 0x00000000 LUT Entry 0 LUT (addr 0x10FF1060): lut_ctrl (addr 0x10FF1060EHWIC ESWGE I2C read error *Nov 21 16:13:00.715: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:01.395: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:01.395: EHWIC ESWGE I2C read error *Nov 21 16:13:01.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slo): 0x00000000 base_limit (addr 0x1t 10FF1064): 0x0000FFFF LUT Entry 1 LUT (addr 0x10FF1068): lut_ctrl (addr 0x10FF1068): 0x00000000 base_limit (addr 0x10FF106C): 0x0000FFFF LUT Entry 2 LUT (addr 0x10FF1070): lut_ctrl (addr 0x10FF1070): 0x00000000 base_limit (addr 0x10FF1074): 0x0000FFFF LUT Entry 3 LUT (addr 0x10FF1078): lut_ctrl *Nov 21 16:13:01.475: EHWIC ESWGE I2C read error *Nov 21 16:13:02.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:02.155: EHWIC ESWGE I2C read error *Nov 21 16:13:02.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:02.235: EHWIC ESWGE I2C read error *Nov 21 16:13:02.915: EHW (addr 0x10FF1078): 0x00000000 base_limit (addr 0x10FF107C): 0x0000FFFF Device Node 2 io-controller hsib (addr 0x10FF2000): dn_ctrl (addr 0x10FF2000): 0x0000001B dn_initiator_thlv (addr 0x10FF2004): 0x00080404 dn_target_thlv (addr 0x10FF2008): 0x0004020E dn_status (addr 0x10FF200C): 0x00000000 dn_initiator_error (aIC ESWGE I2C read error *Nov 21 16:13:03.135: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:03.135: EHWIC ESWGE I2C read error *Nov 21 16:13:03.215: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:03.895: %ESWGE_ERR-3-CMDddr 0x10FF2010): 0x00000000 dn_target_error (addr 0x10FF2014): 0x00000000 dn_initiator_error_mask (addr 0x10FF2018): 0x00000000 dn_target_error_mask (addr 0x10FF201C): 0x00000000 dn_node_id (addr 0x10FF2020): 0x00000002 dnQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1_target_online (addr 0x10FF2024): 0x000000FF dn_first_error_hsib_hdr (addr 0x10FF2028): 0x00000000 dn_first_error_address (addr 0x1 *Nov 21 16:13:03.895: EHWIC ESWGE I2C read error *Nov 21 16:13:03.975: EHWIC ESWGE I2C read error *Nov 21 16:13:04.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:04.655: EHWIC ESWGE I2C read error *Nov 21 16:13:04.735: EHWIC ESWGE I2C read error *Nov 21 10FF202C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF2030): 0x00000000 dn_first_error_address (addr 0x10FF2034): 0x00000000 dn_aux_ctrl (addr 0x10FF2050): 0x0000032B dn_timeout_ctrl (addr 0x10FF2054): 0x00000000 dn_timer (addr 0x10FF2058): 0x0009092C hsib_no_lut_priority (addr 0x10FF205C): 0x00000000 LUT Entry 0 LUT (addr 0x10FF2060): lut_ctrl 6:13:04.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:05.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:05.519: EHWIC ESWGE I2C read error *Nov 21 16:13:05.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:05.599: EHWIC ESWGE (addr 0x10FF2060): 0x00000000 base_limI2C read error it (addr 0x10FF2064): 0x0000FFFF LUT Entry 1 LUT (addr 0x10FF2068): lut_ctrl (addr 0x10FF2068): 0x00000000 base_limit (addr 0x10FF206C): 0x0000FFFF LUT Entry 2 LUT (addr 0x10FF2070): lut_ctrl (addr 0x10FF2070): 0x00000000 base_limit (addr 0x10FF2074): 0x0000FFFF LUT Entry 3 LUT *Nov 21 16:13:06.279: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:06.279: EHWIC ESWGE I2C read error *Nov 21 16:13:06.359: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:06.359: EHWIC ESWGE I2C read error *Nov 21 16:13:07.039: EHWIC ESWGE I2C read error *Nov 21 16:13:07.199: (addr 0x10FF2078): lut_ctrl (addr 0x10FF2078): 0x00000000 base_limit (addr 0x10FF207C): 0x0000FFFF Device Node 3 io-controller hsib (addr 0x10FF3000): dn_ctrl (addr 0x10FF3000): 0x0000001B dn_initiator_thlv (addr 0x10FF3004): 0x00080404 dn_target_thlv (addr 0x10FF3008): 0x0004020E dn_status (addr 0x10FF300C): 0x00000000 dn%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:07.203: EHWIC ESWGE I2C read error *Nov 21 16:13:07.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:07.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai_initiator_error (addr 0x10FF3010): 0x00000000 dn_target_error (addr 0x10FF3014): 0x00000000 dn_initiator_error_mask (addr 0x10FF3018): 0x00000000 dn_target_error_mask (adl at in slot 1dr 0x10FF301C): 0x00000000 dn_node_id (addr 0x10FF3020): 0x00000003 dn_target_online (addr 0x10FF3024): 0x000000FF dn_first_error_hsib_hdr (addr 0x10FF3028): 0x00000000 dn_first_ *Nov 21 16:13:07.963: EHWIC ESWGE I2C read error *Nov 21 16:13:08.043: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:08.043: EHWIC ESWGE I2C read error *Nov 21 16:13:08.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:08.723: EHWIC ESWGE I2C read error *Nov 21 16:13:08.803: error_address (addr 0x10FF302C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF3030): 0x00000000 dn_first_error_address (addr 0x10FF3034): 0x00000000 dn_aux_ctrl (addr 0x10FF3050): 0x0000032B dn_timeout_ctrl (addr 0x10FF3054): 0x00000000 dn_timer (addr 0x10FF3058): 0x000F318F hsib_no_lut_priority (addr 0x10FF305C): 0x00000000 LUT Entry 0 LUTEHWIC ESWGE I2C read error *Nov 21 16:13:08.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:09.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:09.571: EHWIC ESWGE I2C read error *Nov 21 16:13:09.651: %ESWGE_ERR-3 (addr 0x10FF3060): lut_ctrl (addr 0x10FF3060): 0x00000000 base_limit -CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10FF3064): 0x0000FFFF LUT Entry 1 LUT (addr 0x10FF3068): lut_ctrl (addr 0x10FF3068): 0x00000000 base_limit (addr 0x10FF306C): 0x0000FFFF LUT Entry 2 LUT (addr 0x10FF3070): lut_ctrl (addr 0x10FF3070): 0x00000000 base_limit (addr 0x10F *Nov 21 16:13:09.651: EHWIC ESWGE I2C read error *Nov 21 16:13:10.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:10.331: EHWIC ESWGE I2C read error *Nov 21 16:13:10.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16F3074): 0x0000FFFF LUT Entry 3 LUT (addr 0x10FF3078): lut_ctrl (addr 0x10FF3078): 0x00000000 base_limit (addr 0x10FF307C): 0x0000FFFF Device Node 4 io-controller hsib (addr 0x10FF4000): dn_ctrl (addr 0x10FF4000): 0x0000001B dn_initiator_thlv (addr 0x10FF4004): 0x00080404 dn_target_thlv (addr 0x10FF4008): 0x0004020E dn_status :13:10.411: EHWIC ESWGE I2C read error *Nov 21 16:13:11.091: EHWIC ESWGE I2C read error *Nov 21 16:13:11.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:11.311: EHWIC ESWGE I2C read error *Nov 21 16:13:11.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c (addr 0x10FF400C): 0x00000000 dn_initiator_error (addr 0x10FF4010): 0x00000000 dn_target_error (addr 0x10FF4014): 0x00000000 dn_initiator_error_mask (addr 0x10FF4018): 0x00000000 dn_target_error_mask (addr 0x10FF401C): 0x00000000 dn_node_id (addr 0x10FF4020): 0x00000004 dn_target_online (addr 0x10FF4024): 0x000000FF dn_first_error_hsib_hdr (admd Write fail at in slot 1 *Nov 21 16:13:12.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:12.071: EHWIC ESWGE I2C read error *Nov 21 16:13:12.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:12.151: EHWIC ESWGE I2C read error *Nov 21 16:13:12.831: %ESWGE_ERR-3-CMDQ_FULL: Codr 0x10FF4028): 0x00000000 dn_first_error_address (addr 0x10FF402C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF4030): 0x00000000 dn_first_error_address (addr 0x10FF4034): 0x00000000 dn_aux_ctrmmand queue is Full, I2C cmd Read fail at in slot 1l (addr 0x10FF4050): 0x0000032B dn_timeout_ctrl (addr 0x10FF4054): 0x00000000 dn_timer (addr 0x10FF4058): 0x000D4F37 hsib_no_lut_priority (addr 0x10 *Nov 21 16:13:12.831: EHWIC ESWGE I2C read error *Nov 21 16:13:12.911: EHWIC ESWGE I2C read error *Nov 21 16:13:12.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:13.679: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1FF405C): 0x00000000 LUT Entry 0 LUT (addr 0x10FF4060): lut_ctrl (addr 0x10FF4060): 0x00000000 base_limit (addr 0x10FF4064): 06:13:13.679: EHWIC ESWGE I2C read error x0000FFFF LUT Entry 1 LUT (addr 0x10FF4068): lut_ctrl (addr 0x10FF4068): 0x00000000 base *Nov 21 16:13:13.759: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1_limit (addr 0x10FF406C): 0x0000FFFF LUT Entry 2 LUT (addr 0x10FF4070): lut_ctrl (addr 0x10FF4070): 0x00000000 base_limit *Nov 21 16:13:13.759: EHWIC ESWGE I2C read error *Nov 21 16:13:14.439: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:14.439: EHWIC ESWGE I2C read error *Nov 21 16:13:14.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: (addr 0x10FF4074): 0x0000FFFF LUT Entry 3 LUT (addr 0x10FF4078): lut_ctrl (addr 0x10FF4078): 0x00000000 base_limit (addr 0x10FF407C): 0x0000FFFF Device Node 5 io-controller hsib (addr 0x10FF5000): dn_ctrl (addr 0x10FF5000): 0x0000001B dn_initiator_thlv (addr 0x10FF5004): 0x00040404 dn_target_thlv (addr 0x10FF5008): 0x0004040413:14.519: EHWIC ESWGE I2C read error *Nov 21 16:13:15.199: EHWIC ESWGE I2C read error *Nov 21 16:13:15.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:15.347: EHWIC ESWGE I2C read error *Nov 21 16:13:15.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:16.107: %ESWGE_ERR-3- dn_status (addr 0x10FF500C): 0x00000000 dn_initiator_error (addr 0x10FF5010): 0x00000000 dn_target_error (addr 0x10FF5014): 0x00000000 dn_initiator_error_mask (addr 0x10FF5018): 0x00000000 dn_target_error_mask (addr 0x10FF501C): 0x00000000 dn_node_id (addr 0x10FF5020): 0x00000005 dn_target_online (addr 0x10FF5024): 0x000000FF dn_CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:16.107: EHWIC ESWGE I2C read error *Nov 21 16:13:16.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:16.187: EHWIC ESWGE I2C read error *Nov 21 16:13:16.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16first_error_hsib_hdr (addr 0x10FF5028): 0x00000000 dn_first_error_address (addr 0x10FF502C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF5030): 0x00000000 dn_first_error_address (addr 0x10FF5034): 0x00000000 dn_aux_ctrl (addr 0x10FF5050): 0x0000013B dn_timeout_ctrl (addr 0x10FF5054): 0x00000000 dn_timer (addr 0x10FF5058): 0x000C789B hsib_no_lu:13:16.867: EHWIC ESWGE I2C read error *Nov 21 16:13:16.947: EHWIC ESWGE I2C read error *Nov 21 16:13:17.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:17.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:17.731: Et_priority (addr 0x10FF505C): 0x00000130 LUT Entry 0 LUT (addr 0x10FF5060): lut_ctrl (addr 0x10FF5060): 0x00000000 base_limit (addr 0x10FF5064): 0x0000FFFF LUT Entry 1HWIC ESWGE I2C read error LUT (addr 0x10FF5068): lut_ctrl (addr 0x10FF5068): 0x00000000 base_limit *Nov 21 16:13:17.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10FF506C): 0x0000FFFF LUT Entry 2 LUT (addr 0x10FF5070): lut_ctrl (addr *Nov 21 16:13:17.811: EHWIC ESWGE I2C read error *Nov 21 16:13:18.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:18.491: EHWIC ESWGE I2C read error *Nov 21 16:13:18.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:18.571: EHWIC ESWGE I2C read error *Nov 21 16:13:19.267: E 0x10FF5070): 0x00000000 base_limit (addr 0x10FF5074): 0x0000FFFF LUT Entry 3 LUT (addr 0x10FF5078): lut_ctrl (addr 0x10FF5078): 0x00000000 base_limit (addr 0x10FF507C): 0x0000FFFF Device Node 6 io-controller hsib (addr 0x10FF6000): dn_ctrl (addr 0x10FF6000): 0x0000001B dn_initiator_thlv (addr 0x10FF6004): 0x00040404 dn_target_thlv HWIC ESWGE I2C read error *Nov 21 16:13:19.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:19.347: EHWIC ESWGE I2C read error *Nov 21 16:13:19.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:20.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10FF6008): 0x00040404 dn_status (addr 0x10FF600C): 0x00000000 dn_initiator_error (addr 0x10FF6010): 0x00000000 dn_target_error (addr 0x10FF6014): 0x00000000 dn_initiator_error_mask (addr 0x10FF6018): 0x00000000 dn_target_error_mask (addr 0x10FF601C): 0x00000000 dn_node_id (addr 0x10FF6020): 0x00000006 dn_target_online *Nov 21 16:13:20.107: EHWIC ESWGE I2C read error *Nov 21 16:13:20.187: EHWIC ESWGE I2C read error *Nov 21 16:13:20.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:20.867: EHWIC ESWGE I2C read error *Nov 21 16:13:20.947: EHWIC ESWGE I2C read error *Nov 21 16:13:21.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C (addr 0x10FF6024): 0x000000FF dn_first_error_hsib_hdr (addr 0x10FF6028): 0x00000000 dn_first_error_address (addr 0x10FF602C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF6030): 0x00000000 dn_first_error_address (addr 0x10FF6034): 0x00000000 dn_aux_ctrl (addr 0x10FF6050): 0x0000012B dn_timeout_ctrl (addr 0x10FF6054): 0x00000000 dn_timer (addcmd Write fail at in slot 1 *Nov 21 16:13:21.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:21.851: EHWIC ESWGE I2C read error *Nov 21 16:13:21.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:21.931: EHWIC ESWGE Ir 0x10FF6058): 0x000B8BC9 hsib_no_lut_priority (addr 0x10FF605C): 0x00000120 LUT Entry 0 LUT (addr 0x10FF6060): lut_ctrl (addr 0x10FF6060): 0x00000000 base_limit (addr2C read error 0x10FF6064): 0x0000FFFF LUT Entry 1 LUT (addr 0x10FF6068): lut_ctrl (addr 0x10FF6068): 0x00 *Nov 21 16:13:22.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1000000 base_limit (addr 0x10FF606C): 0x0000FFFF LUT Entry 2 LUT (addr 0x10FF6070): lut_c *Nov 21 16:13:22.611: EHWIC ESWGE I2C read error *Nov 21 16:13:22.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:22.691: EHWIC ESWGE I2C read error *Nov 21 16:13:23.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:23.371: EHWIC ESWGE I2C read error *Nov 21 16:13:23.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read failtrl (addr 0x10FF6070): 0x00000000 base_limit (addr 0x10FF6074): 0x0000FFFF LUT Entry 3 LUT (addr 0x10FF6078): lut_ctrl (addr 0x10FF6078): 0x00000000 base_limit (addr 0x10FF607C): 0x0000FFFF Device Node 7 io-controller hsib (addr 0x10FF7000): dn_ctrl (addr 0x10FF7000): 0x0000001B dn_initiator_thlv (addr 0x10FF7004): 0x00 at in slot 1 *Nov 21 16:13:23.451: EHWIC ESWGE I2C read error *Nov 21 16:13:23.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:24.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0404041 16:13:24.311: EHWIC ESWGE I2C read error dn_target_thlv (addr 0x10FF7008): 0x00040404 dn_status (addr 0x10FF700C): 0x00000000 dn_initiator_error (addr 0x10FF7010): 0x00000000 dn_target_error (addr 0x10FF7014): 0x00000000 dn_initiator_error_mask (addr 0x10FF7018): 0x00000000 dn_target_error_mask (addr 0x10FF701C): 0x00000000 dn_node_id (addr 0x10FF7020): 0x00000007 *Nov 21 16:13:24.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:24.391: EHWIC ESWGE I2C read error *Nov 21 16:13:25.071: EHWIC ESWGE I2C read error *Nov 21 16:13:25.239: EHWIC ESWGE I2C read error *Nov 21 16:13:25.503: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:26.183: dn_target_online (addr 0x10FF7024): 0x000000FF dn_first_error_hsib_hdr (addr 0x10FF7028): 0x00000000 dn_first_error_address (addr 0x10FF702C): 0x00000000 dn_second_error_hsib_hdr (addr 0x10FF7030): 0x00000000 dn_first_error_address (addr 0x10FF7034): 0x00000000 dn_aux_ctrl (addr 0x10FF7050): 0x0000012B dn_timeout_ctrl (addr 0x10FF7054): 0x00000000 dn_t %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:26.183: EHWIC ESWGE I2C read error *Nov 21 16:13:26.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:26.263: EHWIC ESWGE I2C read error *Nov 21 16:13:26.943: %ESWGE_ERR-imer (addr 0x10FF7058): 0x0009A8A1 hsib_no_lut_priority (addr 0x10FF705C): 0x00000120 LUT Entry 0 LUT (addr 0x10FF7060): lut_ctrl (addr 0x10FF7060): 0x00000000 base_li3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1mit (addr 0x10FF7064): 0x0000FFFF LUT Entry 1 LUT (addr 0x10FF7068): lut_ctrl (addr 0x10FF7068): 0x00000000 base_limit (addr 0x10FF706C): 0x0000FFFF LUT E *Nov 21 16:13:26.943: EHWIC ESWGE I2C read error *Nov 21 16:13:27.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:27.023: EHWIC ESWGE I2C read error *Nov 21 16:13:27.703: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1ntry 2 LUT (addr 0x10FF7070): lut_ctrl (addr 0x10FF7070): 0x00000000 base_limit (addr 0x10FF7074): 0x0000FFFF LUT Entry 3 LUT (addr 0x10FF7078): lut_ctrl (addr 0x10FF7078): 0x00000000 base_limit (addr 0x10FF707C): 0x0000FFFF io-controller hwic0 (addr 0x10FE0000): scratch_reg (addr 0x10FE0100): 0xA0A1A2A3 err_reg0 3:27.703: EHWIC ESWGE I2C read error *Nov 21 16:13:27.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:27.783: EHWIC ESWGE I2C read error *Nov 21 16:13:27.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:28.543: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail (addr 0x10FE0104): 0x00000000 err_reg1 (addr 0x10FE0108): 0x00000000 extnd_reg_err_info (addr 0x10FE010C): 0x00000000 cfg_reg (addr 0x10FE0110): 0x00072701 oir_reg (addr 0x10FE0114): 0x00000000 ram_err_injection_reg (addr 0x10FE0118): 0x00000000 egr_cache_debug_reg (addr 0x10FE011C): 0x00000107 err_int_en_reg0 (a at in slot 1 *Nov 21 16:13:28.543: EHWIC ESWGE I2C read error *Nov 21 16:13:28.623: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:28.623: EHWIC ESWGE I2C read error *Nov 21 16:13:29.303: EHWIC ESWGE I2C read error *Nov 21 16:13:29.419: EHWIC ESWGE I2C read erroddr 0x10FE0120): 0x00000000 err_int_en_reg1 (addr 0x10FE0124): 0x00000000 io-controller hwic1 (addr 0x10FE4000): scratch_reg (addr 0x10FE4100): 0xA0A1A2A3 err_reg0 (addr 0x10FE4104): 0x00000000 err_reg1 (addr 0x10FE4108): 0x00000000 extnd_reg_err_info (addr 0x10FE410C): 0x00000000 cfg_reg (addr 0x10FE4110): 0x00072701 oir_r *Nov 21 16:13:29.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:30.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:30.363: EHWIC ESWGE I2C read error *Nov 21 16:13:30.443: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:30.443reg (addr 0x10FE4114): 0x00000000 ram_err_injection_reg (addr 0x10FE4118): 0x00000000 egr_cache_debug_reg (addr 0x10FE411C): 0x00000107 err_int_en_reg0 (addr 0x10FE4120): 0x00000032 err_int_en_reg1 (: EHWIC ESWGE I2C read error addr 0x10FE4124): 0x00000000 io-controller hwic2 (addr 0x10FE8000): scratch_reg (addr 0x10FE8100): 0xA0A1A2A3 err_reg0 (add *Nov 21 16:13:31.123: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:31.123: EHWIC ESWGE I2C read error *Nov 21 16:13:31.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:31.203: EHWIC ESWGE I2C read error *Nov 21 16:1r 0x10FE8104): 0x00000000 err_reg1 (addr 0x10FE8108): 0x00000000 extnd_reg_err_info (addr 0x10FE810C): 0x00000000 cfg_reg (addr 0x10FE8110): 0x00072701 oir_reg (addr 0x10FE8114): 0x00000000 ram_err_injection_reg (addr 0x10FE8118): 0x00000000 egr_cache_debug_reg (addr 0x10FE811C): 0x00000107 err_int_en_reg0 (addr 0x10F3:31.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:31.883: EHWIC ESWGE I2C read error *Nov 21 16:13:31.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:31.963: EHWIC ESWGE I2C read error *Nov 21 16:13:32.043: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail E8120): 0x00000000 err_int_en_reg1 (addr 0x10FE8124): 0x00000000 io-controller hwic3 (addr 0x10FEC000): scratch_reg (addr 0x10FEC100): 0xA0A1A2A3 err_reg0 (addr 0x10FEC104): 0x00000000 err_reg1 (addr 0x10FEC108): 0x00000000 extnd_reg_err_info (addr 0x10FEC10C): 0x00000000 cfg_reg (addr 0x10FEC110): 0x00072701 oir_reg at in slot 1 *Nov 21 16:13:32.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:32.723: EHWIC ESWGE I2C read error *Nov 21 16:13:32.803: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at ill, I2C cmd Read fail at in slot 1n slot 1 *Nov 21 16:13:32.803: EHWIC ESWGE I2C read error *Nov 21 16:13:33.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Fu (addr 0x10FEC114): 0x00000000 ram_err_injection_reg (addr 0x10FEC118): 0x00000000 egr_cache_debug_reg (addr 0x10FEC11C): 0x00000107 err_int_en_reg0 (addr 0x10FEC120): 0x00000000 err_int_en_reg1 (addr 0x10FEC124): 0x00000000 io-controller interrupts (addr 0x10900000): cpu1_network_intr_enable (addr 0x10900000): 0x1C020FFF cpu1_mgmt_intr_enable (addr 0x *Nov 21 16:13:33.483: EHWIC ESWGE I2C read error *Nov 21 16:13:33.587: EHWIC ESWGE I2C read error *Nov 21 16:13:33.855: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:34.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 110900008): 0x00000000 cpu1_error_intr_enable (addr 0x1090000C): 0x7C3F0FFF cpu2_network_intr_enable (addr 0x10900010): 0x00000000 cpu2_mgmt_intr_enable (addr 0x10900018): 0x00000000 cpu2_error_intr_enable (addr 0x1090001C): 0x00000000 redirect6:13:34.535: EHWIC ESWGE I2C read error _ntwk_intr_en (addr 0x10900020): 0x00000000 redirect_mgmt_intr_en (addr 0x10900028): 0x00000000 redirect_err_intr_en (addr 0x1090002 *Nov 21 16:13:34.615: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:34.615: EHWIC ESWGE I2C read error *Nov 21 16:13:35.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:35.295: EHWIC ESWGE I2C read error *Nov 21 16:C): 0x00000000 network interrupt status (addr 0x10900030): 0x00000000 mgmt interrupt status (addr 0x10900038): 0x00000000 error interrupt status (addr 0x1090003C): 0x00400000 msi_intr_relax_order 13:35.375: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10900040): 0x00000000 hsib_error_intr_enable (addr 0x10900048): 0x0000FC03 hsib_error_intr_status (addr 0x1090004C): 0x00000000 hisb_en_error_pcie0low (addr 0x10900050): 0x0 *Nov 21 16:13:35.375: EHWIC ESWGE I2C read error *Nov 21 16:13:36.055: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:36.055: EHWIC ESWGE I2C read error *Nov 21 16:13:36.135: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:01FFFFE hisb_en_error_pcie0high (addr 0x10900054): 0x00FFFFFF hisb_en_error_pcie1low (addr 0x10900058): 0x00000000 hisb_en_error_pcie1high 13:36.135: EHWIC ESWGE I2C read error (addr 0x1090005C): 0x00000000 hisb_en_error_pcie2low (addr 0x10900060): 0x00000000 hisb_en_error_pcie2high (addr 0x10900064): 0x00000000 hisb_en_error_pcie3low (addr 0x10900068): 0x00000000 hisb_en_error_pcie3high (addr 0x1090006C): 0x00000000 *Nov 21 16:13:36.215: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:36.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:36.895: EHWIC ESWGE I2C read error *Nov 21 16:13:36.975: %ESWGE_ERR-3-CMDQ_FULL: Command queue i hisb_en_error_pcie4low (addr 0x10900070): 0x0s Full, I2C cmd Read fail at in slot 10000000 hisb_en_error_pcie4high (addr 0x10900074): 0x00000000 hsib_en_error_glb_reg_low (addr *Nov 21 16:13:36.975: EHWIC ESWGE I2C read error 0x10900078): 0x001FFFFE hsib_en_error_glb_reg_high (addr 0x1090007C): 0x00FFFFFF hsib_en_error_hwic_low (addr 0x10900080): 0x001FFFFE hsib_en_error_hwic_high (addr 0x10900084): 0x00FFFFFF hsib_en_error_wan_low (addr 0x10900088): 0x001FFFFE hsi *Nov 21 16:13:37.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:37.655: EHWIC ESWGE I2C read error *Nov 21 16:13:37.819: EHWIC ESWGE I2C read error *Nov 21 16:13:37.899: %ESWGE_ERR-3-CMDQ_FULL: Commb_en_error_wan_high (addr 0x1090008C): 0x00FFFFFF hsib_error_event_pcie0low (addr 0x10900090): 0x00000000 hsib_error_event_pcie0high (addr 0x10900094): 0x00000000 hsib_error_event_pcie1low (addr 0x10900098): 0x00000000 hsib_error_event_pcie1high (addr 0x1090009C): 0x00000000 hsib_error_event_pcie2low (addr 0x109000A0): 0x00000000 hsib_error_event_pcie2high (addr 0x109000A4): 0x00000000 hsib_errorand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:38.579: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:38.579: EHWIC ESWGE I2C read error *Nov 21 16:13:38.659: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13SWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1:38.659: EHWIC ESWGE I2C read error *Nov 21 16:13:39.339: %E_event_pcie3low (addr 0x109000A8): 0x00000000 hsib_error_event_pcie3high (addr 0x109000AC): 0x00000000 hsib_error_event_pcie4low (addr 0x109000B0): 0x00000000 hsib_error_event_pcie4high (addr 0x109000B4): 0x00000000 hsib_error_event_glb_reg_low (addr 0x109000B8): 0x00000000 hsib_error_event_glb_reg_high (addr 0x109000BC): 0x00000000 hsib_error_event_hwic_low (addr 0x109000C0): 0x00000000 hsib_error_event_ *Nov 21 16:13:39.339: EHWIC ESWGE I2C read error *Nov 21 16:13:39.419: EHWIC ESWGE I2C read error *Nov 21 16:13:40.099: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 hwic_high (addr 0x109000C4): 0x00000000 hsib_error_event_wan_low (addr 0x109000C8): 0x00000000 hsib_error_event_wan_high (addr 0x109000CC): 0x00000000 i2c_master_intr_en (addr 0x109000D0): 0x00000000 i2c_master_intr_status (addr 0x109000D4): 0x00000000 pcie_err_intr_en (addr 0x109000D8): 0x00000000 pcie_err_event (addr 0x109000DC): 0x00000000 interrupt_delay_gpio 0 *Nov 21 16:13:40.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:40.179: EHWIC ESWGE I2C read error *Nov 21 16:13:40.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:40.939: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:40.939: (addr 0x109000E0): 0x00000000 interrupt_dleay_gpio 1 (addr 0x109000E4): 0x00000000 interrupt_delay_gpio 2 (addr 0x109000E8): 0x00000000 i EHWIC ESWGE I2C read error nterrupt_delay_gpio 3 (addr 0x109000EC): 0x00000000 interrupt_delay_hdlc 0 (addr 0x109000F0): *Nov 21 16:13:41.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 10x00000000 interrupt_delay_hdlc 1 (addr 0x109000F4): 0x00000000 interrupt_delay_hdlc 2 (addr 0x109000F8): 0x00000000 interrupt_delay_hdlc 3 *Nov 21 16:13:41.019: EHWIC ESWGE I2C read error *Nov 21 16:13:41.699: EHWIC ESWGE I2C read error *Nov 21 16:13:41.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:41.883: EHWIC ESWGE I2C read error *Nov 21 16:13:41.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is (addr 0x109000FC): 0x00000000 interrupt_delay_hdlc 4 (addr 0x10900100): 0x00000000 interrupt_delay_hdlc 5 (addr 0x10900104): 0x00000000 interrupt_delay_hdlc 6 (addr 0x10900108): 0x00000000 interrupt_delay_hdlc 7 (addr 0x1090010C): 0x00000000 interrupt_delay_hwic 0 (addr 0x10900110): 0x00000000 interrupt_delay_hwic 1 (addr 0x10900114): 0x00000000 interrupt_delay_hwic 2 Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:42.651: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:42.651: EHWIC ESWGE I2C read error *Nov 21 16:13:42.731: EHWIC ESWGE I2C read error *Nov 21 16:13:43.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:43.411: EHWIC ESWGE I (addr 0x10900118): 0x00000000 interrupt_delay_hwic 3 2C read error (addr 0x1090011C): 0x00000000 interrupt_delay_scc (addr 0x10900120): 0x00000000 interrupt_delay_packet_pump (addr 0x10900124): 0x00000000 cpu1_cap_ntwk_pcie_msi0 (addr 0x10900140): 0x015B5400 cpu1_cap_ntwk_pcie_msi1 (addr 0x10900144): 0x0000BCB0 cpu1_cap_ntwk_pcie_msi2 (addr 0x10900148): 0x00000080 cpu1_cap_ntwk_pcie_msi3 (addr *Nov 21 16:13:43.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:43.491: EHWIC ESWGE I2C read error *Nov 21 16:13:44.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:44.171: EHWIC ESWGE I2C read error *Nov 21 16:13:44.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c0x1090014C): 0x00000000 cpu1_cap_ntwk_pcie_msi4 (addr 0x10900150): 0x00000000 cpu1_cap_mgmt_pcie_msi0 (addr 0x10900154): 0x010A6800 cpu1_cap_mgmt_pcie_msi1 (addr 0x10900158): 0x00000000 cpu1_cap_mgmt_pcie_msi2 (addr 0x1090015C): 0x00000000 cpu1_cap_mgmt_pcie_msi3 (addr 0x10900160): 0xFFFFFFFF cpu1_cap_mgmt_pcie_msi4 (addr 0x10900164): 0x00000000 cpu1_cap_error_pcie_msi0 (addr 0x10900md Read fail at in slot 1 *Nov 21 16:13:44.251: EHWIC ESWGE I2C read error *Nov 21 16:13:44.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:45.099: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:45.099: EHWIC ESWGE I2168): 0x015B7C00 cpu1_cap_error_pcie_msi1 (addr 0x1090016C): 0x0000BCB0 cpu1_cap_error_pcie_msi2 (addr 0x10900170): 0x000000C0 cpu1_cap_error_pcie_msi3 (addr 0x10900174): 0x00000000 cpu1_cap_error_pcie_mC read error si4 (addr 0x10900178): 0x00000000 cpu2_cap_ntwk_pcie_msi0 (addr 0x1090017C): 0x010A9000 cpu2_ *Nov 21 16:13:45.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1cap_ntwk_pcie_msi1 (addr 0x10900180): 0x00000000 cpu2_cap_ntwk_pcie_msi2 (addr 0x10900184): 0 *Nov 21 16:13:45.179: EHWIC ESWGE I2C read error *Nov 21 16:13:45.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:45.931: EHWIC ESWGE I2C read error *Nov 21 16:13:46.011: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:46.011: EHWIC ESWGE I2C read error *Nov 21 16:13:46.091: %x00000000 cpu2_cap_ntwk_pcie_msi3 (addr 0x10900188): 0xFFFFFFFF cpu2_cap_ntwk_pcie_msi4 (addr 0x1090018C): 0x00000000 cpu2_cap_mgmt_pcie_msi0 (addr 0x10900190): 0x010AA400 cpu2_cap_mgmt_pcie_msi1 (addr 0x10900194): 0x00000000 cpu2_cap_mgmt_pcie_msi2 (addr 0x10900198): 0x00000000 cpu2_cap_mgmt_pcie_msi3 (addr 0x1090019C): 0xFFFFFFFF cpu2_cap_mgmt_pcie_msi4 (addr 0x109001A0): 0x000000ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:46.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:46.915: EHWIC ESWGE I2C read error *Nov 21 16:13:47.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 00ov 21 16:13:47.019: EHWIC ESWGE I2C read error cpu2_cap_error_pcie_msi0 (addr 0x109001A4): 0x010AB800 cpu2_cap_error_pcie_msi1 (addr 0x109001A8): 0x00000000 cpu2_cap_error_pcie_msi2 (addr 0x109001AC): 0x00000000 cpu2_cap_error_pcie_msi3 (addr 0x109001B0): 0xFFFFFFFF cpu2_cap_error_pcie_msi4 (addr 0x109001B4): 0x00000000 io-controller packet pump (addr 0x10880000): ppsr0 (addr 0x10880000): 0x00000000 ppsr1 *Nov 21 16:13:47.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:47.699: EHWIC ESWGE I2C read error *Nov 21 16:13:47.835: EHWIC ESWGE I2C read error *Nov 21 16:13:48.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:48.515: EHWIC ESWGE I2C read error *Nov 21 16:13:48.687: EH (addr 0x10880004): 0x00000000 ppcr0 (addr 0x10880008): 0x0B000000 ppcr1 (addr 0x1088000C): 0x00000000 ppcr2 (addr 0x10880010): 0x00000000 ppcr3 (addr 0x10880014): 0x00000000 ppcr4 (addr 0x10880018): 0x00000000 d_mer (addr 0x1088001C): 0x00000000 chcpicr0 WIC ESWGE I2C read error *Nov 21 16:13:48.895: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:49.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:49.575: EHWIC ESWGE I2C read error *Nov 21 16:13:49.655: %ESWGE_ERR-3- (addr 0x10880020): 0x00000000 chcpicr1 (addr 0x10880024): 0x00000000 rrcr (addr 0x10880028): 0x00000000 rrar (addr 0x1088002C): 0x00000000 d_btvr (addr 0x10880030): 0x00001000 d_tf_mr (addr 0x10880034)CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1: 0x00000000 d_wsr (addr 0x10880038): 0x00000000 d_idqsr *Nov 21 16:13:49.655: EHWIC ESWGE I2C read error *Nov 21 16:13:50.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:50.335: EHWIC ESWGE I2C read error *Nov 21 16:13:50.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:50.415: EHWIC ESWGE I2C read error *Nov 21 16:13:50.595: (addr 0x1088003C): 0x00000000 d_cdmdbslr1 (addr 0x10880044): 0x00001000 d_cdmdbslr2 (addr 0x10880048): 0x00001000 d_cdmdbslr3 (addr 0x1088004C): 0x00002000 ewqvr[0] (addr 0x10880050): 0x00010101 ewqvr[1] (addr 0x10880054): 0x00010101 ewqvr[2] (addr 0x10880058): 0x00010101 ewqvr[3] (addr 0%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:51.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:51.275: EHWIC ESWGE I2C read error *Nov 21 16:13:51.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:51.355: EHWIC ESWGE I2C read errorx1088005C): 0x00010101 iwqvr[0] (addr 0x10880060): 0x00000101 iwqvr[1] (addr 0x10880064): 0x00000101 iwqvr[2] (addr 0x10880068): 0x00000101 iwqvr[3] (addr 0x1088006C): 0x00000101 eddtvr (addr 0x10880070): 0x00009C40 d_irpr (addr 0x10880100): 0x00000000 d_iipr (addr 0x108801 *Nov 21 16:13:52.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:52.035: EHWIC ESWGE I2C read error *Nov 21 16:13:52.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:52.115: EHWIC ESWGE I2C read error *Nov 21 16:13:52.827: EHWIC ESWGE I2C read error *Nov 21 16:13:53.091: %E04): 0x00000000 ppr[0].d_erpr[0] (addr 0x10880108): 0x00000000 ppr[0].d_erpr[1] (addr 0x1088010C): 0x00000000 ppr[0].d_erpr[2] (addr 0x10880110): 0x00000000 ppr[0].d_erpr[3] (addr 0x10880114): 0x00000000 ppr[0].d_eipr[0] (addr 0x10880118): 0x00000000 ppr[0].d_eipr[1] (addr 0x1088011C): 0x00000000 ppr[0].d_eipr[2] (addr 0x10880120): 0xSWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:53.091: EHWIC ESWGE I2C read error *Nov 21 16:13:53.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:53.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail00000000 ppr[0].d_eipr[3] (addr 0x10880124): 0x00000000 ppr[0].d_eipr[4] (addr 0x10880128): 0x00000000 ppr[0].d_eipr[5] (addr 0x1088012C): 0x00000000 ppr[0].d_eipr[6] (addr 0x10880130): 0x00000000 ppr[0].d_eipr[7] (addr 0x10880134): 0x00000000 ppr[0].d_eip at in slot 1r[8] (addr 0x10880138): 0x00000000 ppr[0].d_eipr[9] (addr 0x1088013C): 0x0000000 *Nov 21 16:13:53.851: EHWIC ESWGE I2C read error *Nov 21 16:13:53.931: EHWIC ESWGE I2C read error *Nov 21 16:13:54.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:54.611: EHWIC ESWGE I2C read error *Nov 21 16:13:54.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:54.691: 0 ppr[0].d_eipr[10] (addr 0x10880140): 0x00000000 ppr[0].d_eipr[11] (addr 0x10880144): 0x00000000 ppr[0].d_eipr[12] (addr 0x10880148): 0x00000000 ppr[0].d_eipr[13] (addr 0x1088014C): 0x00000000 ppr[0].d_eipr[14] EHWIC ESWGE I2C read error (addr 0x10880150): 0x00000000 ppr[0].d_eipr[15] (addr 0x10880154): 0x00000000 ppr[1].d_erpr[0] (addr 0x10880158): 0x00000000 pp *Nov 21 16:13:54.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:55.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:55.475: EHWIC ESWGE I2C read error *Nov 21 16:13:55.555: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:55.555: Er[1].d_erpr[1] (addr 0x1088015C): 0x00000000 ppr[1].d_erpr[2] (addr 0x10880160): 0x00000000 ppr[1].d_erpr[3] (addr 0x108HWIC ESWGE I2C read error 80164): 0x00000000 ppr[1].d_eipr[0] (addr 0x10880168): 0x00000000 ppr[1].d_eipr[1] (addr 0x1088016C): 0x00000000 ppr[1].d_eipr[2] (addr 0x10880170): 0x00000000 ppr[1].d_eipr[3] (addr 0x10880174): 0x00000000 ppr[1].d_ *Nov 21 16:13:56.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:56.235: EHWIC ESWGE I2C read error *Nov 21 16:13:56.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:56.315: EHWIC ESWGE I2C read error *Nov 21 16eipr[4] (addr 0x10880178): 0x00000000 ppr[1].d_eipr[5] (addr 0x1088017C): 0x00000000 ppr[1].d_eipr[6] (addr 0x10880180): 0x00000000 ppr[1].d_eipr[7] (addr 0x10880184): 0x00000000 ppr[1].d_eipr[8] (addr 0x10880188): 0x00000000 ppr[1].d_eipr[9] (addr 0x1088018C): 0x00000000 ppr[1].d_eipr[10] (addr 0x10880190): 0x00000000 ppr[1].d_eipr[11:13:57.011: EHWIC ESWGE I2C read error *Nov 21 16:13:57.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:57.275: EHWIC ESWGE I2C read error *Nov 21 16:13:57.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:58.035: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fai] (addr 0x10880194): 0x00000000 ppr[1].d_eipr[12] (addr 0x10880198): 0x00000000 ppr[1].d_eipr[13] (addr 0x1088019C): 0x00000000 ppr[1].d_eipr[14] (addr 0x108801A0): 0x00000000 ppr[1].d_eipr[15] (addr 0x108801A4): 0x00000000 ppr[2].d_erpr[0] (addr 0x108801A8): 0x00000000 ppr[2].d_erpr[1] (addr 0x108801AC): 0x00000000 ppr[2].d_erpr[2] l at in slot 1 *Nov 21 16:13:58.035: EHWIC ESWGE I2C read error *Nov 21 16:13:58.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:58.115: EHWIC ESWGE I2C read error *Nov 21 16:13:58.795: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x108801B0): 0x00000000 ppr[2].d_erpr[3] (addr 0x108801B4): 0x00000000 ppr[2].d_eipr[0] (addr 0x108801B8): 0x00000000 ppr[2].d_eipr[1] (addr 0x108801BC): 0x00000000 ppr[2].d_eipr[2] (addr 0x108801C0): *Nov 21 16:13:58.795: EHWIC ESWGE I2C read error 0x00000000 ppr[2].d_eipr[3] (addr 0x108801C4): 0x00000000 ppr[2].d_eipr[4] (addr 0x108801C8): 0x00000000 ppr[2].d_eipr[5] *Nov 21 16:13:58.875: EHWIC ESWGE I2C read error *Nov 21 16:13:58.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:13:59.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:13:59.643: EHWIC ESWGE I2C read error *Nov 21 16:1 (addr 0x108801CC): 0x00000000 ppr[2].d_eipr[6] (addr 0x108801D0): 0x00000000 ppr[2].d_eipr[7] (addr 0x108801D4): 0x00000000 ppr[2].d_eipr[8] (addr 0x108801D8): 0x00000000 3:59.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 ppr[2].d_eipr[9] (addr 0x108801DC): 0x00000000 ppr[2].d_eipr[10] (addr 0x108801E0): 0x00000000 ppr[2].d_eipr[11] (addr 0x108801E4): 0x00000000 ppr[2].d_eipr[12] *Nov 21 16:13:59.723: EHWIC ESWGE I2C read error *Nov 21 16:14:00.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:00.403: EHWIC ESWGE I2C read error *Nov 21 16:14:00.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: (addr 0x108801E8): 0x00000000 ppr[2].d_eipr[13] (addr 0x108801EC): 0x00000000 ppr[2].d_eipr[14] (addr 0x108801F0): 0x00000000 ppr[2].d_eipr[15] (addr 0x108801F4): 0x00000000 ppr[3].d_erpr[0] (addr 0x108801F8): 0x00000000 ppr[3].d_erpr[1] (addr 0x108801FC): 0x00000000 ppr[3].d_erpr[2] (addr 0x10880200): 0x00000000 ppr[3].d_erpr[3] (addr14:00.483: EHWIC ESWGE I2C read error *Nov 21 16:14:01.163: EHWIC ESWGE I2C read error *Nov 21 16:14:01.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:01.383: EHWIC ESWGE I2C read error *Nov 21 16:14:01.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm 0x10880204): 0x00000000 ppr[3].d_eipr[0] (addr 0x10880208): 0x00000000 ppr[3].d_eipr[1] (addr 0x1088020C): 0x00000000 ppr[3].d_eipr[2] (addr 0x10880210): 0x00000000 ppr[3].d_eipr[3] (addr 0x10880214): 0x00000000 ppr[3].d_eipr[4] (addr 0x10880218): 0x00000000 ppr[3].d_eipr[5] (addr 0x1088021C): 0x00000000 ppr[3].d_eipr[6] (addr 0x1088d Write fail at in slot 1 *Nov 21 16:14:02.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:02.171: EHWIC ESWGE I2C read error *Nov 21 16:14:02.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd mand queue is Full, I2C cmd Read fail at in slot 1 Read fail at in slot 1 *Nov 21 16:14:02.251: EHWIC ESWGE I2C read error *Nov 21 16:14:02.931: %ESWGE_ERR-3-CMDQ_FULL: Com0220): 0x00000000 ppr[3].d_eipr[7] (addr 0x10880224): 0x00000000 ppr[3].d_eipr[8] (addr 0x10880228): 0x00000000 ppr[3].d_eipr[9] (addr 0x1088022C): 0x00000000 ppr[3].d_eipr[10] (addr 0x10880230): 0x00000000 ppr[3].d_eipr[11] (addr 0x10880234): 0x00000000 ppr[3].d_eipr[12] (addr 0x10880238): 0x00000000 ppr[3].d_eipr[13] (addr 0x1088023C): *Nov 21 16:14:02.931: EHWIC ESWGE I2C read error *Nov 21 16:14:03.011: EHWIC ESWGE I2C read error *Nov 21 16:14:03.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:03.827: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0x00000000 ppr[3].d_eipr[14] (addr 0x10880240): 0x00000000 ppr[3].d_eipr[15] (addr 0x10880244): 0x00000000 ppr[4].d_erpr[0] (addr 0x10880248): 0x00000000 ppr[4].d_erpr[1] (addr 0x1088024C): 0x00000000 ppr[4].d_erpr[2] 14:03.827: EHWIC ESWGE I2C read error (addr 0x10880250): 0x00000000 ppr[4].d_erpr[3] (addr 0x10880254): 0x00000000 ppr[4].d_eipr[0] (addr 0x10880258): 0x00000 *Nov 21 16:14:03.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:03.907: EHWIC ESWGE I2C read error *Nov 21 16:14:04.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:04.587: EHWIC ESWGE I2C read error *Nov 21 16000 ppr[4].d_eipr[1] (addr 0x1088025C): 0x00000000 ppr[4].d_eipr[2] (addr 0x10880260): 0x00000000 ppr[4].d_eipr[3] (addr 0x10880264): 0x00000000 ppr[4].d_eipr[4] :14:04.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10880268): 0x00000000 ppr[4].d_eipr[5] (addr 0x1088026C): 0x00000000 ppr[4].d_eipr[6] (addr 0x10880270): 0x00000000 ppr[4].d_eipr[7] (addr 0x10880274): 0x00000000 *Nov 21 16:14:04.667: EHWIC ESWGE I2C read error *Nov 21 16:14:05.431: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:05.431: EHWIC ESWGE I2C read error *Nov 21 16:14:05.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:ppr[4].d_eipr[8] (addr 0x10880278): 0x00000000 ppr[4].d_eipr[9] (addr 0x1088027C): 0x00000000 ppr[4].d_eipr[10] (addr 0x10814:05.511: EHWIC ESWGE I2C read error 80280): 0x00000000 ppr[4].d_eipr[11] (addr 0x10880284): 0x00000000 ppr[4].d_eipr[12] (addr 0x10880288): 0x00000000 ppr[4].d_eipr[13] (addr 0x1088028C): 0x00000000 ppr[4].d_eipr[14] (addr 0x10880290): 0x00000000 ppr[4]. *Nov 21 16:14:05.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:06.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:06.271: EHWIC ESWGE I2C read error *Nov 21 16:14:06.415: EHWIC ESWGE I2C read error *Nov 21 16:1d_eipr[15] (addr 0x10880294): 0x00000000 ppr[5].d_erpr[0] (addr 0x10880298): 0x0004:07.095: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100000 ppr[5].d_erpr[1] (addr 0x1088029C): 0x00000000 ppr[5].d_erpr[2] (addr 0x108802A0): 0x00000000 ppr[5].d_erpr[3] (addr 0x108802A4): 0x00000000 ppr[5].d_eipr[0] (addr 0x108802A8): 0x00000000 ppr[5].d_eipr[1] (addr 0x108802AC): 0x00000000 ppr[5].d_eipr[ *Nov 21 16:14:07.095: EHWIC ESWGE I2C read error *Nov 21 16:14:07.175: EHWIC ESWGE I2C read error *Nov 21 16:14:07.327: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:08.007: %ESWGE_ERR-3-CMDQ_FULL: C2] (addr 0x108802B0): 0x00000000 ppr[5].d_eipr[3] (addr 0x108802B4): 0x00000000 ppr[5].d_eipr[4] (addr 0x108802B8): 0x00000000 ppr[5].d_eipr[5] (addr 0x108802BC): 0x00000000 ppr[5].d_eipr[6] (addr 0x108802C0): 0x00000000 ppr[5].d_eipr[7] (addr 0x108802C4): 0x00000000 ppr[5].d_eipr[8] (addr 0x108802C8): 0x00000000 ppr[5].d_eipr[9] ommand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:08.007: EHWIC ESWGE I2C read error *Nov 21 16:14:08.087: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:08.087: EHWIC ESWGE I2C read error *Nov 21 16:14:08.767: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:08.767: E (addr 0x108802CC): 0x00000000 ppr[5].d_eipr[10] (addr 0x108802D0): 0x00000000 ppr[5].d_eipr[11] (addr 0x108802D4): 0x00000000 ppr[5].d_eipr[12] (addr 0x108802D8): 0x00000000 ppr[5].d_eipr[13] (addr 0x108802DC): 0x00000000 ppr[5].d_eipr[14] (addr 0x108802E0): 0x00000000 ppr[5].d_eipr[15] (addr 0x108802E4): 0x00000000 peisr HWIC ESWGE I2C read error *Nov 21 16:14:08.847: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:08.847: EHWIC ESWGE I2C read error *Nov 21 16:14:09.527: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:09.527: EHWIC ESWGE I (addr 0x10880300): 0x00000002 peier (addr 0x10880304): 0x00000000 peir (addr 0x10880308): 0x00000000 ppsbesr (addr 0x10880800): 0x00000000 ppsbecr (addr 0x10880804): 0x00000000 pvdm_pld[0].reset (addr 0x10881400): 0x0000FFFF pvdm_pld[0].board_level (addr 0x10881404): 0x0000FFFF pvdm_pld[0].interrupt 2C read error *Nov 21 16:14:09.607: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:09.607: EHWIC ESWGE I2C read error *Nov 21 16:14:09.687: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:10.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1 (addr 0x10881408): 0x0000FFFF pvdm_pld[0].mask (addr 0x1088140C): 0x0000FFFF pvdm_pld[0].hrrq_ma6:14:10.467: EHWIC ESWGE I2C read error sk (addr 0x10881410): 0x0000FFFF pvdm_pld[0].htrq_mask (addr 0x10881414): 0x0000FFFF pvdm_ *Nov 21 16:14:10.547: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1pld[0].hrrq_reg (addr 0x10881418): 0x0000FFFF pvdm_pld[0].htrq_reg (addr 0x1088141C): 0x0000FFFF pvdm_pld[0].preset (addr 0x10881420): 0x0000FFFF pvdm_pld[1].reset (ad *Nov 21 16:14:10.547: EHWIC ESWGE I2C read error *Nov 21 16:14:11.227: EHWIC ESWGE I2C read error *Nov 21 16:14:11.451: EHWIC ESWGE I2C read error *Nov 21 16:14:11.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot dr 0x10881440): 0x0000FFFF pvdm_pld[1].board_level (addr 0x10881444): 0x0000FFFF pvdm_pld[1].interrupt (addr 0x10881448): 0x0000FFFF pvdm_pld[1].mask (addr 0x1088144C): 0x0000FFFF pvdm_pld[1].hrrq_mask (addr 0x10881450): 0x0000FFFF pvdm_pld[1].htrq_mask (addr 0x10881454): 0x0000FFFF pvdm_pld[1].hrrq_reg (addr 0x10881458): 0x0000FFFF pvdm_pld[1].htrq_reg (addr 0x101 *Nov 21 16:14:12.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:12.211: EHWIC ESWGE I2C read error *Nov 21 16:14:12.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:12.291: EHWIC ESWGE I2C read error *Nov 21 16:14:12.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 188145C): 0x0000FFFF pvdm_pld[1].preset (addr 0x10881460): 0x0000FFFF pvdm_pld[2].reset (addr 0x10881480): 0x0000FFFF pvdm_pld[2].board_level (addr 0x10881484): 0x0000FFFF pvdm_pld[2].interrupt (addr 0x10881488): 0x0000FFFF pvdm_pld[2].mask (addr 0x1088148C): 0x0000FFFF pvdm_pld[2].hrrq_mask (addr 0x10881490): 0x0000FFFF pvdm_pld[2].htrq_mask (addr 0x10881494) *Nov 21 16:14:12.971: EHWIC ESWGE I2C read error *Nov 21 16:14:13.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:13.051: EHWIC ESWGE I2C read error *Nov 21 16:14:13.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:: 0x0000FFFF pvdm_pld[2].hrrq_reg (addr 0x10881498): 0x0000FFFF pvdm_pld[2].htrq_reg (addr 0x1088149C): 0x0000FFFF pvdm_pld[2].preset (addr 0x108814A0): 0x0000FFFF pvdm_pld[3].reset (addr 0x108814C0): 0x0000FFFF pvdm_pld[3].board_level (addr 0x108814C4): 0x0000FFFF pvdm_pld[3].interrupt (addr 0x108814C8): 0x0000FFFF pvdm_pld[3].mask (addr 0x108814CC): 0x00014:13.731: EHWIC ESWGE I2C read error *Nov 21 16:14:13.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:13.811: EHWIC ESWGE I2C read error *Nov 21 16:14:14.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:14.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail a0FFFF pvdm_pld[3].hrrq_mask (addr 0x108814D0): 0x0000FFFF pvdm_pld[3].htrq_mask (addr 0x108814D4): 0x0000FFFF pvdm_pld[3].hrrq_reg (at in slot 1ddr 0x108814D8): 0x0000FFFF pvdm_pld[3].htrq_reg (addr 0x108814DC): 0x0000FFFF pvdm_pld[3].preset *Nov 21 16:14:14.683: EHWIC ESWGE I2C read error (addr 0x108814E0): 0x0000FFFF io-controller reset controller (addr 0x10900480): dn_reset (addr 0x10900480): 0x00000000 function_block_re *Nov 21 16:14:14.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:14.763: EHWIC ESWGE I2C read error *Nov 21 16:14:15.515: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:15.515: EHWIC ESWGE I2C read error *Nov 21 16:1set (addr 0x10900484): 0x00000000 host_cpu_reset (addr 0x10900488): 0x00000000 ioctrl_warm_reset (addr 0x1090048C): 0x00000000 host_system_reset (addr 0x10900490): 0x00000000 WatchDog 0 wdog_timer_limit (addr 0x10900494): 0x01312D00 wdog_timer_service (addr 0x10900498): 0x00000004 wdog_timer_enable (addr 0x1090049C): 0x00000002 wdog_timer4:15.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:15.595: EHWIC ESWGE I2C read error *Nov 21 16:14:15.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:16.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:16.495: EHWIC ESWGE I2C_trigger_level (addr 0x109004A0): 0x00000000 Wa read error tchDog 1 wdog_timer_limit (addr 0x109004A4): 0x00FFFFFF wdog_timer_service (addr 0x109004A8): 0x00000000 wdog_timer_enable (addr 0x109004AC): 0x00000000 wdog_timer_trigger_level (addr 0x109004B0): 0x00000000 reset_status (addr 0x109004B4): 0x00000100 io-controller scc (addr 0x10890000): STI_errintr_status *Nov 21 16:14:16.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:16.575: EHWIC ESWGE I2C read error *Nov 21 16:14:17.255: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:17.255: EHWIC ESWGE I2C read error *Nov 21 16:14:17.423: EHWIC ESWGE I2C read error *Nov 21 16:14:18.103: (addr 0x10890004): 0x00000000 STI_errintr_enable (addr 0x10890008): 0x7FFFFFFF SCC_ctrl_regs (addr 0x10891004): 0x0000 mgmt_intr_status (addr 0x10891010): 0x0010 netio_intr_status (addr 0x10891012): 0x0000 timer_0_7_status (addr 0x10891014): 0x0000 timer_16_19_status (addr 0x10891016): 0x0000 mgmt_intr_enable (ad%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:18.103: EHWIC ESWGE I2C read error *Nov 21 16:14:18.183: EHWIC ESWGE I2C read error *Nov 21 16:14:18.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:19.083: %ESWGE_ERR-3dr 0x10891020): 0x0002 netio_intr_enable (addr 0x10891022): 0x0000 timer_0_7_enable (addr 0x10891024): 0x0000 timer_16_19_enable (addr 0x10891026): 0x0000 timer_0_1_program (addr 0x10891030): 0x0000 timer_2_3_program (addr 0x10891032): 0x00-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 100 timer_4_5_program (addr 0x10891034): 0x0000 timer_6_7_program (addr 0x10 *Nov 21 16:14:19.083: EHWIC ESWGE I2C read error *Nov 21 16:14:19.163: EHWIC ESWGE I2C read error *Nov 21 16:14:19.843: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:19.843: EHWIC ESWGE I2C read error *Nov 21 16:14:19.923: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:19.923: EHWIC ESWGE I2C read error *Nov 21 16:14:20.003: %ESWGE_ERR-3891036): 0x0000 timer_16_program (addr 0x10891040): 0x0000 timer_17_program (addr 0x10891042): 0x0000 timer_18_program (addr 0x10891044): 0x0000 timer_19_program (addr 0x10891046): 0x0000 scc_regs[0].ch_mode_cfg (addr 0x10891100): 0x10019030 scc_regs[0].ch_flag_cfg (addr 0x10891104): 0x0000 scc_regs[0].ch_flwctrl_cfg (addr 0x10891108)-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:20.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:20.683: EHWIC ESWGE I2C read error *Nov 21 16:14:20.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slo: 0x0000 scc_regs[0].ch_intr_status (addr 0x1t 1089110A): 0x0000 scc_regs[0].ch_intr_enable (addr 0x1089110C): 0x0000 scc_regs[0].ch_cmd_stat (addr 0x1089110E): 0x0028 scc_regs[1].ch_mode_cfg (addr 0x10891110): 0x10019030 scc_regs[1].ch_flag_cfg (addr 0x10891114): 0x0000 scc_regs[1].ch_flwctrl_cfg (addr 0x10891118): 0x0000 scc_regs[1].ch_intr_status (addr 0x1089111A): 0 *Nov 21 16:14:20.763: EHWIC ESWGE I2C read error *Nov 21 16:14:21.443: EHWIC ESWGE I2C read error *Nov 21 16:14:21.523: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:21.523: EHWIC ESWGE I2C read error *Nov 21 16:14:22.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:22.203: x0000 scc_regs[1].ch_intr_enable (addr 0x1089111C): 0x0000 scc_regs[1].ch_cmd_stat (addr 0x1089111E): 0x0028 scc_regs[2].ch_mode_cfg (addr 0x10891120): 0x10019030 scc_regs[2].ch_flag_cfg (addr 0x10891124): 0x0000 scc_regs[2].ch_flwctrl_cfg (addr 0x10891128): 0x0000 scc_regs[2].ch_intr_status (addr 0x1089112A): 0x0000 scc_regs[2].ch_intr_enable (addr 0x1089112C): 0x0000 EHWIC ESWGE I2C read error *Nov 21 16:14:22.335: EHWIC ESWGE I2C read error *Nov 21 16:14:22.603: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:23.283: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:23.283: EHWIC ESWGE I2 scc_regs[2].ch_cmd_stat (addr 0x1089112E): 0x0028 scc_regs[3].ch_mode_cfg (addr 0x10891130): 0x10019030 scc_regs[3].ch_flag_cfg (addr 0x10891134): 0x0000 scc_regs[3].ch_flwctrl_cfg (addr 0x10891138): 0x0000 scc_regs[3].ch_intr_status (addr 0x1089113A): 0x0000 scc_regs[3].ch_intr_enaC read error ble (addr 0x1089113C): 0x0000 scc_regs[3].ch_cmd_stat (addr 0x1089113E): 0x0028 scc_r *Nov 21 16:14:23.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:23.363: EHWIC ESWGE I2C read error *Nov 21 16:14:24.043: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:24.043: EHWIC ESWGE I2C read error *Nov 21 16:14:24.123: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmegs[4].ch_mode_cfg (addr 0x10891140): 0x10019030 scc_regs[4].ch_flag_cfg (addr 0x10891144): 0x0000 scc_regs[4].ch_flwctrl_cfg (addr 0x10891148): 0x0000 scc_regs[4].ch_intr_status (addr 0x1089114A): 0x0000 scc_regs[4].ch_intr_enable (addr 0x1089114C): 0x0000 scc_regs[4].ch_cmd_stat (addr 0x1089114E): 0x0028 scc_regs[5].ch_mode_cfg (addr 0x10891150): 0x10019030 scc_regs[5].d Read fail at in slot 1 *Nov 21 16:14:24.123: EHWIC ESWGE I2C read error *Nov 21 16:14:24.243: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:24.923: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:24.923: EHWIC ESWGE I2C read error *Nov 21 16:14:25.003: %ESWGE_ERR-3-CMDQ_FULL: Commach_flag_cfg (addr 0x10891154): 0x0000 scc_nd queue is Full, I2C cmd Read fail at in slot 1regs[5].ch_flwctrl_cfg (addr 0x10891158): 0x0000 scc_regs[5].ch_intr_status (addr 0x1089115A): 0x0000 scc_regs[5].ch_intr_enable (addr 0x1089115C): 0x0000 scc_regs[5].ch_cmd_stat (addr 0x1089115E): 0x0028 scc_regs[6].ch_mode_cfg (addr 0x10891160): 0x10019030 scc_regs[6].ch_flag_cfg (addr 0x10891164): 0x0000 scc_regs[6].ch_flwc *Nov 21 16:14:25.003: EHWIC ESWGE I2C read error *Nov 21 16:14:25.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:25.683: EHWIC ESWGE I2C read error *Nov 21 16:14:25.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16trl_cfg (addr 0x10891168): 0x0000 scc_regs[6].ch_intr_status (addr 0x1089116A): 0x0000 scc_regs[6].ch_intr_enable (addr 0x1089116C): 0x0000 scc_regs[6].ch_cmd_stat (addr 0x1089116E): 0x0028 scc_regs[7].ch_mode_cfg (addr 0x10891170): 0x10019030 scc_regs[7].ch_flag_cfg (addr 0x10891174): 0x0000 scc_regs[7].ch_flwctrl_cfg (addr 0x10891178): 0x0000 scc_regs[7].ch_intr_status:14:25.763: EHWIC ESWGE I2C read error *Nov 21 16:14:26.459: EHWIC ESWGE I2C read error *Nov 21 16:14:26.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:26.667: EHWIC ESWGE I2C read error *Nov 21 16:14:26.747: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:27.427: %ESWGE_ERR- (addr 0x1089117A): 0x0000 scc_regs[7].ch_intr_enable (addr 0x1089117C): 0x0000 scc_regs[7].ch_cmd_stat (addr 0x1089117E): 0x0028 rx_dma_regs[0].ring_start_ptr (addr 0x10892000): 0x00000000 rx_dma_regs[0].ring_mask_index (addr 0x10892004): 0x00000000 rx_dma_regs[0].dma_internal_desc_stat (addr 0x10892008): 0x00000000 rx_dma_regs[0].dma_internal_buff_addr (addr 0x1089200C): 0x00000000 rx_dma_regs[0].dma_internal_conte3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:27.427: EHWIC ESWGE I2C read error *Nov 21 16:14:27.507: EHWIC ESWGE I2C read error *Nov 21 16:14:28.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:28.187: EHWIC ESWGE I2C read errxt (addr 0x10892010): 0x00000000 rx_dma_regs[0].dma_internal_fifo_data (addr 0x10892014): 0x00000000 rx_dma_regs[1].ring_start_ptr (addr 0x10892020): 0x00000000 rx_dma_regs[1].ring_mask_index (addr 0x10892024): 0x00000000 rxor _dma_regs[1].dma_internal_desc_stat (addr 0x10892028): 0x00000000 rx_dma_regs[1].dma_internal_buff_addr (addr 0x1089202C): 0x00000000 rx_dma_regs[1].dma_internal_context (addr 0x10892030): 0x00000000 rx_dma_regs[1].dma_internal_fifo_data ( *Nov 21 16:14:28.267: EHWIC ESWGE I2C read error *Nov 21 16:14:28.367: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:29.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:29.047: EHWIC ESWGE I2C read error *Nov 21 16:14:29.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C caddr 0x10892034): 0x00000000 rx_dma_regs[2].ring_start_ptr (addr 0x10892040): 0x00000000 rx_dma_regs[2].ring_maskmd Read fail at in slot 1_index (addr 0x10892044): 0x00000000 rx_dma_regs[2].dma_internal_desc_stat (addr 0x10892048): 0x00000000 rx_dma_regs[2].dma_internal_buff_addr (addr 0x1089204C): 0x00000000 rx_dma_regs[2].dma_internal_context (addr 0x10892050): 0x00000000 rx_dma_regs[2].dma_internal_fifo_data (addr 0x10892054): 0x00000000 rx_dma_regs[3].ring_start_ptr (addr 0x *Nov 21 16:14:29.127: EHWIC ESWGE I2C read error *Nov 21 16:14:29.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:29.807: EHWIC ESWGE I2C read error *Nov 21 16:14:29.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1610892060): 0x00000000 rx_dma_regs[3].ring_mask_index (addr 0x10892064): 0x00000000 rx_dma_regs[3].dma_internal_desc_stat (addr 0x10892068): 0x00000000 rx_dma_regs[3].dma_internal_buff_addr (addr 0x1089206C): 0x00000000 rx_dma_regs[3].dma_internal_context (addr 0x10892070): 0x00000000 rx_dma_regs[3].dma_internal_fifo_data (addr 0x10892074): 0x00000000 rx_dma_regs[4].ring_start_ptr (addr 0x10892080): 0x00000000 rx_dma_regs[4].ring_mask_index (addr 0x1089208:14:29.887: EHWIC ESWGE I2C read error *Nov 21 16:14:30.567: EHWIC ESWGE I2C read error *Nov 21 16:14:30.787: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:30.787: EHWIC ESWGE I2C read error *Nov 21 16:14:30.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:31.547: %ESWGE_ERR-3-4): 0x00000000 rx_dma_regs[4].dma_internal_desc_stat (addr 0x10892088): 0x00000000 rx_dma_regs[4].dma_internal_buff_addr (addr 0x1089208C): 0x00000000 rx_dma_regs[4].dma_internal_context (addr 0x10892090): 0x00000000 rx_dma_regs[4].dma_internal_fifo_data (addr 0x10892094): 0x00000000 rx_dma_regs[5].ring_start_ptr (addr 0x108920A0): 0x00000000 rx_dma_regs[5].ring_mask_index (addr 0x108920A4): 0x00000000 rx_dma_regs[5].dma_internal_desc_stat (addr 0x108920A8): 0x0CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:31.547: EHWIC ESWGE I2C read error *Nov 21 16:14:31.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:31.627: EHWIC ESWGE I2C read error *Nov 21 16:14:32.307: %ESWGE_ERR-3-CMDQ_FULL: C0000000 rx_dma_regs[5].dma_internal_buff_addr (addr 0x108920AC): 0x00000000 rx_dma_regs[5].dma_internal_context (addr 0x108920B0): 0x00000000 rx_dma_regs[5].dma_internal_fifo_data (addr 0x108920B4): 0x00000000 rx_dma_regs[6].ring_start_ptrommand queue is Full, I2C cmd Read fail at in slot 1 (addr 0x108920C0): 0x00000000 rx_dma_regs[6].ring_mask_index (addr 0x108920C4): 0x00000000 rx_dma_regs[6].dma_internal_desc_stat (addr 0x108920C8): 0x00000000 rx_dma_regs[6].dma_internal_buff_addr (addr 0x108920CC): 0x00000000 *Nov 21 16:14:32.307: EHWIC ESWGE I2C read error *Nov 21 16:14:32.387: EHWIC ESWGE I2C read error *Nov 21 16:14:32.475: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:33.155: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1 rx_dma_regs[6].dma_internal_context (addr 0x108920D0): 0x00000000 rx_dma_regs[6].dma_internal_fifo_data (addr 0x108920D4): 0x00000000 rx_dma_regs[7].ring_start_ptr (addr6:14:33.155: EHWIC ESWGE I2C read error 0x108920E0): 0x00000000 rx_dma_regs[7].ring_mask_index (addr 0x108920E4): 0x00000000 rx_dma_regs[7].dma_internal_ *Nov 21 16:14:33.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1desc_stat (addr 0x108920E8): 0x00000000 rx_dma_regs[7].dma_internal_buff_addr (addr 0x108920EC): 0x00000000 rx_dma_regs[7].dma_internal_context (addr 0x108920F0): 0x00000000 rx_ *Nov 21 16:14:33.235: EHWIC ESWGE I2C read error *Nov 21 16:14:33.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:33.915: EHWIC ESWGE I2C read error *Nov 21 16:14:33.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16dma_regs[7].dma_internal_fifo_data (addr 0x108920F4): 0x00000000 tx_dma_regs[0].ring_start_ptr (addr 0x10892200): 0x00000000 tx_dma_regs[0].ring_mask_index (addr 0x10892204): 0x00000000 tx_dma_regs[0].dma_internal_desc_stat (addr 0x10892208): 0x00000000 tx_dma_regs[0].dma_internal_buff_addr (addr 0x1089220C): 0x00000000 tx_dma_regs[0].dma_internal_context (addr 0x10892210): 0x00000000 tx_dma_regs[0].dma_internal_fifo_data (addr 0x10892214): 0x00000000 tx_dma_reg:14:33.995: EHWIC ESWGE I2C read error *Nov 21 16:14:34.675: EHWIC ESWGE I2C read error *Nov 21 16:14:34.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:34.839: EHWIC ESWGE I2C read error *Nov 21 16:14:34.919: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:35.599: %ESWGE_ERR-3-s[1].ring_start_ptr (addr 0x10892220): 0x00000000 tx_dma_regs[1].ring_mask_index (addr 0x10892224): 0x00000000 tx_dma_regs[1].dma_internal_desc_stat (addr 0x10892228): 0x00000000 tx_dma_regs[1].dma_internal_buff_addr (addr 0x1089222C): 0x00000000 tx_dma_regs[1].dma_internal_context (addr 0x10892230): 0x00000000 tx_dma_regs[1].dma_internal_fifo_data (addr 0x10892234): 0x00000000 tx_dma_regs[2].ring_start_ptr (addr 0x10892240): 0x00000000 tx_dma_regs[2].riCMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:35.599: EHWIC ESWGE I2C read error *Nov 21 16:14:35.679: EHWIC ESWGE I2C read error *Nov 21 16:14:36.359: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:36.359: EHWIC ESWGE I2C read error *Nov 21 16:14:36.439: %ESWGE_ERR-3-CMDQ_FULL: Command queue ing_mask_index (addr 0x10892244): 0x00000000 tx_dma_regs[2].dma_internal_desc_stat (addr 0x10892248): 0x00000000 tx_dma_regs[2].dma_internal_buff_addr (addr 0x1089224C): 0x00000000 tx_dma_regs[2].dma_internal_context (addr 0x10892250): 0x00000000 tx_dma_regs[2].dma_internal_fifo_data (addr 0x10892254): 0x00000000 tx_dma_regs[3].ring_start_ptr (addr 0x10892260): 0x00000000 tx_dma_regs[3].ring_mask_index (addr 0x10892264): 0x00000000 tx_dma_regs[3].dma_inters Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:36.439: EHWIC ESWGE I2C read error *Nov 21 16:14:36.583: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:37.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:37.263: Enal_desc_stat (addr 0x10892268): 0x00000000 tx_dma_regs[3].dma_internal_buff_addr (addr 0x1089226C): 0x00000000 tx_dma_regs[3].dma_internal_context (addr 0x10892270): 0x00000000 tx_dma_regs[3].dma_internal_fifo_data (addr 0x10892274): 0x00000000 tx_dma_regs[4].ring_start_ptr (addr 0x10892280):HWIC ESWGE I2C read error 0x00000000 tx_dma_regs[4].ring_mask_index (addr 0x10892284): 0x00000000 tx_dma_regs[4].dma_internal_desc_stat (addr 0x10892288): 0x00000000 tx_dma_regs[4].dma_internal_buf *Nov 21 16:14:37.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:37.343: EHWIC ESWGE I2C read error *Nov 21 16:14:38.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:38.023: EHWIC ESWGE I2C read error *Nov 21 16:14:38.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmf_addr (addr 0x1089228C): 0x00000000 tx_dma_regs[4].dma_internal_context (addr 0x10892290): 0x00000000 tx_dma_regs[4].dma_internal_fifo_data (addr 0x10892294): 0x00000000 tx_dma_regs[5].ring_start_ptr (addr 0x108922A0): 0x00000000 tx_dma_regs[5].ring_mask_index (addr 0x108922A4): 0x00000000 tx_dma_regs[5].dma_internal_desc_stat (addr 0x108922A8): 0x00000000 tx_dma_regs[5].dma_internal_buff_addr (addr 0x108922AC): 0x00000000 tx_dma_regs[5].dma_internal_context d Read fail at in slot 1 *Nov 21 16:14:38.103: EHWIC ESWGE I2C read error *Nov 21 16:14:38.783: EHWIC ESWGE I2C read error *Nov 21 16:14:38.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:38.863: EHWIC ESWGE I2C read error *Nov 21 16:14:38.943: %ESWGE_ERR-3-CM (addr 0x108922B0): 0x00000000 tx_dma_regs[5].dma_internal_fifo_data (addr 0x108922B4): 0x00000000 tx_dma_regs[6].ring_start_ptr (addr 0x108922C0): 0x00000000 tx_dma_regs[6].ring_mask_index (addr 0x108922C4): 0x00000000 tx_dma_regs[6].dma_internal_desc_stat (addr 0x108922C8): 0x00000000 tx_dma_regs[6].dma_internal_buff_addr (addr 0x108922CC): 0x00000000 tx_dma_regs[6].dma_internal_context (addr 0x108922D0): 0x00000000 tx_dma_regs[6].dma_internal_fifo_data (addr DQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:39.623: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:39.623: EHWIC ESWGE I2C read error *Nov 21 16:14:39.739: EHWIC ESWGE I2C read error *Nov 21 16:14:40.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:0x108922D4): 0x00000000 tx_dma_regs[7].ring_start_ptr (addr 0x108922E0): 0x00000000 tx_dma_regs[7].ring_mask_index (addr 0x108922E4): 0x00000000 tx_dma_regs[7].dma_internal_desc_stat (addr 0x108922E8): 0x00000000 tx_dma_regs[7].dma_internal_buff_addr (addr 0x108922EC): 0x00000000 tx_dma_regs[7].dma_internal_context (addr 0x108922F0): 0x00000000 tx_dma_regs[7].dma_internal_fifo_data (addr 0x108922F4): 0x00000000 txbsc_regs[0].context_cfg_pad_char (addr 0x1089214:40.419: EHWIC ESWGE I2C read error *Nov 21 16:14:40.499: EHWIC ESWGE I2C read error *Nov 21 16:14:40.647: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:41.327: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:41.327: 400): 0x00000000 txbsc_regs[1].context_cfg_pad_char (addr 0x10892410): 0x00000000 txbsc_regs[2].context_cfg_pad_char (addr 0x10892420): 0x00000000 txbsc_regs[3].context_cfg_pad_char (addr 0x10892430): 0x00000000 txbsc_regs[4].contextEHWIC ESWGE I2C read error _cfg_pad_char (addr 0x10892440): 0x00000000 txbsc_regs[5].context_cfg_pad_char (addr 0x10892450): 0x00000000 txbsc *Nov 21 16:14:41.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1_regs[6].context_cfg_pad_char (addr 0x10892460): 0x00000000 txbsc_regs[7].context_cfg_pad_char (addr 0x10892470): 0 *Nov 21 16:14:41.407: EHWIC ESWGE I2C read error *Nov 21 16:14:42.087: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:42.087: EHWIC ESWGE I2C read error *Nov 21 16:14:42.167: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:42.167: EHWIC ESWGE I2C read error *Nov 21 16:14:42.847: %x00000000 txppp_regs[0].accm_map (addr 0x10892600): 0x00000000 txppp_regs[0].special_char (addr 0x10892604): 0x00000000 txppp_regs[0].context (addr 0x1089260C): 0x00000000 txppp_regs[1].accm_map (addr 0x10892610): 0x00000000 txppp_regs[1].special_char (addr 0x10892614): 0x00000000 txppp_regs[1].context (addr 0x1089261C): 0x00000000 txppp_regs[2].accm_map (addr 0x10892620): 0x000000ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:42.847: EHWIC ESWGE I2C read error *Nov 21 16:14:42.927: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:42.927: EHWIC ESWGE I2C read error *Nov 21 16:14:43.007: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 00 txppp_regs[2].special_char (addr 0x10892624): 0x00000000 txppp_regs[2].context (addr 0x1089262C): 0x00000000 txppp_regs[3].accm_map (addr 0x10892630): 0x00000000 txppp_regs[3].special_char (addr 0x10892634): 0x00000000 txppp_regs[3].context (addr 0x1089263C): 0x00000000 txppp_regs[4].accm_map (addr 0x10892640): 0x00000000 txppp_regs[4].special_char (addr 0x10892644): 0x00000000 t1 *Nov 21 16:14:43.787: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:43.787: EHWIC ESWGE I2C read error *Nov 21 16:14:43.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:43.867: EHWIC ESWGE I2C read error *Nov 21 16:14:44.547: EHWIC ESWGE I2C read error *Nov 21 16:14:44.715: Exppp_regs[4].context (addr 0x1089264C): 0x00000000 txppp_regs[5].accm_map (addr 0x10892650): 0x00000000 txppp_regs[5].special_char (addr 0x10892654): 0x00000000 txppp_regs[5].context (addr 0x1089265C): 0x00000000 txppp_regs[6].accm_map (addr 0x10892660): 0x00000000 txppp_regs[6].special_char (addr 0x10892664): 0x00000000 txppp_regs[6].context (addr 0x1089266C): 0x00000000 txppp_reHWIC ESWGE I2C read error *Nov 21 16:14:44.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:45.659: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:45.659: EHWIC ESWGE I2C read error *Nov 21 16:14:45.739: %ESWGE_ERR-3-gs[7].accm_map (addr 0x10892670): 0x00000000 txppp_regs[7].special_char (addr 0x10892674): 0x00000000 txppp_regs[7].context (addr 0x1089267C): 0x00000000 rxppp_regs[0].accm_map (addr 0x10CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1892800): 0x00000000 rxppp_regs[0].special_char (addr 0x10892804): 0x00000000 rxppp_regs[0].context (addr 0x1089280C): 0x00000000 rxppp_regs[1].accm_map (addr 0x10892810): 0x00000000 rxppp_regs[1].s *Nov 21 16:14:45.739: EHWIC ESWGE I2C read error *Nov 21 16:14:46.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:46.419: EHWIC ESWGE I2C read error *Nov 21 16:14:46.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:pecial_char (addr 0x10892814): 0x00000000 rxppp_regs[1].context (addr 0x1089281C): 0x00000000 rxppp_regs[2].accm_map (addr 0x10892820): 0x00000000 rxppp_regs[2].special_char (addr 0x10892824)14:46.499: EHWIC ESWGE I2C read error : 0x00000000 rxppp_regs[2].context (addr 0x1089282C): 0x00000000 rxppp_regs[3].accm_map (addr 0x10892830): 0x00000000 rxppp_regs[3].special_char (addr 0x10892834): 0x00000000 rxppp_regs[3].context *Nov 21 16:14:47.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:47.179: EHWIC ESWGE I2C read error *Nov 21 16:14:47.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:47.259: EHWIC ESWGE I2C read error *Nov 21 16: (addr 0x1089283C): 0x00000000 rxppp_regs[4].accm_map (addr 0x10892840): 0x00000000 rxppp_regs[4].special_char (addr 0x10892844): 0x00000000 rxppp_regs[4].context (addr 0x1089284C): 0x00000000 rxppp_regs[5].accm_map (addr 0x10892850): 0x00000000 rxppp_regs[5].special_char (addr 0x10892854): 0x00000000 rxppp_regs[5].context (addr 0x1089285C): 0x00000000 rxppp_regs[6].accm_map 14:47.339: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:48.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:48.047: EHWIC ESWGE I2C read error *Nov 21 16:14:48.127: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:48.127: EHWIC ESWGE I2C read error (addr 0x10892860): 0x00000000 rxppp_regs[6].special_char (addr 0x10892864): 0x00000000 rxppp_regs[6].context (addr 0x1089286C): 0x00000000 rxppp_regs[7].accm_map (addr 0x10892870): 0x00000000 rxppp_regs[7].special_char (addr 0x10892874): 0x00000000 rxppp_regs[7].context (addr 0x1089287C): 0x00000000 rxbsc_regs[0].context_cfg_pad_char (addr 0x10892A00): 0x00000000 rxbsc_regs[1].context_cfg_pad_char *Nov 21 16:14:48.807: EHWIC ESWGE I2C read error *Nov 21 16:14:48.971: EHWIC ESWGE I2C read error *Nov 21 16:14:49.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:49.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1 (addr 0x10892A10): 0x00000000 rxbsc_regs[2].context_cfg_pad_char (addr 0x10892A20): 0x00000000 rxbsc_regs[3].context_cfg_pad_char (addr 0x10892A30): 0x00000000 rxbsc_regs[4].context_cfg_pad_char (addr 0x10892A40): 0x00000000 rxbsc_regs[5].context_cfg_pad_char (addr 0x10892A50): 0x00000000 rxbsc_regs[6].context_cfg_pad_char (addr 0x10892A60): 0x00000000 rxbsc_regs[7].context_cfg_pad_char (addr 0x10892A70): 0x00000000 intf_regs[0].intf_ctrl (add6:14:49.731: EHWIC ESWGE I2C read error *Nov 21 16:14:49.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:49.811: EHWIC ESWGE I2C read error *Nov 21 16:14:50.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:50.491: EHWIC ESWGE I2C read error *Nov 21 16:14:50.571: %ESWGE_ERR-r 0x10893000): 0x0200 intf_regs[0].modem_ctrl (addr 0x10893002): 0xE010 intf_regs[0].flow_ctrl (addr 0x10893004): 0x0000 intf_regs[0].brg_divider (addr 0x10893006): 0x0000 intf_regs[0].modem_intr_status (addr 0x10893008): 0x000F int3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1f_regs[1].intf_ctrl (addr 0x10893010): 0x0200 intf_regs[1].modem_ctrl (addr 0x10893012): 0xE010 intf_regs[1].flow_ctrl (addr 0x108 *Nov 21 16:14:50.571: EHWIC ESWGE I2C read error *Nov 21 16:14:51.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:51.251: EHWIC ESWGE I2C read error *Nov 21 16:14:51.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1693014): 0x0000 intf_regs[1].brg_divider (addr 0x10893016): 0x0000 intf_regs[1].modem_intr_status (addr 0x10893018): 0x000F intf_regs[2].intf_ctrl (addr 0x10893020): 0x0200 intf_regs[2].modem_:14:51.331: EHWIC ESWGE I2C read error ctrl (addr 0x10893022): 0xE010 intf_regs[2].flow_ctrl (addr 0x10893024): 0x0000 intf_regs[2].brg_divider (addr 0x10893026): 0x0000 intf_regs[2].modem_intr_status (addr 0x10893028): *Nov 21 16:14:51.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:52.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:52.091: EHWIC ESWGE I2C read error *Nov 21 16:14:52.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is 0x000F intf_regs[3].intf_ctrl (addr 0x10893030): 0x0200 intf_regs[3].modem_ctrl (ad Full, I2C cmd Read fail at in slot 1dr 0x10893032): 0xE010 intf_regs[3].flow_ctrl (addr 0x10893034): 0x0000 intf_regs[3].brg_divider *Nov 21 16:14:52.171: EHWIC ESWGE I2C read error (addr 0x10893036): 0x0000 intf_regs[3].modem_intr_status (addr 0x10893038): 0x000F intf_regs[4].intf_ctrl (addr 0x10893040): 0x0200 intf_regs[4].modem_ctrl (addr 0x10893042): 0x *Nov 21 16:14:52.891: EHWIC ESWGE I2C read error *Nov 21 16:14:53.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:53.151: EHWIC ESWGE I2C read error *Nov 21 16:14:53.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:E010 intf_regs[4].flow_ctrl (addr 0x10893044): 0x0000 intf_regs[4].brg_divider (addr 0x10893046): 0x0000 intf_regs[4].modem_intr_status (addr 0x10893048): 0x000F intf_regs[5].intf_ctrl (addr 0x10893050): 0x0200 intf_regs[5].modem_ctrl (addr 0x10893052): 0xE010 intf_regs[5].flow_ctrl (addr 0x10893054): 0x0040 intf_regs[5].brg_divider (addr 0x10893056): 0x0000 14:53.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:53.911: EHWIC ESWGE I2C read error *Nov 21 16:14:53.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:53.991: EHWIC ESWGE I2C read error *Nov 21 16:14:54.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 intf_regs[5].modem_intr_status (addr 0x10893058): 0x000F intf_regs[6].intf_ctrl (addr 0x10893060): 0x0200 intf_regs[6].modem_ctrl (addr 0x10893062): 0xE010 intf_regs[6].flow_ctrl (addr 0x10893064): 0x0000 intf_regs[6].brg_divider (addr 0x10893066): 0x0000 intf_regs[6].modem_intr_status (addr 0x10893068): 0x000F intf_regs[7].intf_ctrl (addr 0x10893070): 0x0200 intf_r *Nov 21 16:14:54.671: EHWIC ESWGE I2C read error *Nov 21 16:14:54.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:54.751: EHWIC ESWGE I2C read error *Nov 21 16:14:55.431: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16egs[7].modem_ctrl (addr 0x10893072): 0xE010 intf_regs[7].flow_ctrl (addr 0x10893074): 0x0040 intf_regs[7].brg_divider (addr 0x10893076): 0x0000 intf_regs[7].modem_intr_status (addr 0x10893078): 0x000F tdm_control (addr 0x10893100): 0x0000 tdm_a_8k_divider (addr 0x10893102): 0x0000 tdm_b_8k_divider (addr 0x10893104): 0x0000 intf_irq_stat:14:55.431: EHWIC ESWGE I2C read error *Nov 21 16:14:55.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:55.511: EHWIC ESWGE I2C read error *Nov 21 16:14:55.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:56.271: us (addr 0x10893106): 0x0000 freq_count_port_sel (addr 0x1089310A): 0x0000 freq_count (addr 0x1089310C): 0x00000000 pll_regs[0].pll_ctrl (addr 0x108931%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 110): 0x0000 pll_regs[0].pll_8kref_divider (addr 0x10893112): 0x0000 pll_regs[0].pll_fback_pre_divider (addr 0x10893114): 0x0000 pll_regs[0].pll_fback_post_divider (addr 0x10893116): 0x0000 pll_regs[1].pll_ctrl *Nov 21 16:14:56.271: EHWIC ESWGE I2C read error *Nov 21 16:14:56.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:56.351: EHWIC ESWGE I2C read error *Nov 21 16:14:57.115: EHWIC ESWGE I2C read error *Nov 21 16:14:57.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue (addr 0x10893120): 0x0000 pll_regs[1].pll_8kref_divider (addr 0x10893122): 0x0000 pll_regs[1].pll_fback_pre_divider (addr 0x10893124): 0x0000 pll_regs[1].pll_fback_post_divider (addr 0x10893126): is Full, I2C cmd Read fail at in slot 1 0x0000 pll_regs[2].pll_ctrl (addr 0x10893130): 0x0000 pll_regs[2].pll_8kref_divider (addr 0x10893132): 0x0000 pll_regs[2].pll_fback_pre_divider (addr 0x10893134): 0x0000 pll_regs[2].pll_fback_post_ *Nov 21 16:14:57.195: EHWIC ESWGE I2C read error *Nov 21 16:14:57.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:14:57.955: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:57.955: EHWIC ESWGE I2C read error *Nov 21 16divider (addr 0x10893136): 0x0000 pll_regs[3].pll_ctrl (addr 0x10893140): 0x0000 pll_regs[3].pll_8kref_divider (addr 0x10893142): 0x0000 pll_:14:58.111: EHWIC ESWGE I2C read error regs[3].pll_fback_pre_divider (addr 0x10893144): 0x0000 pll_regs[3].pll_fback_post_divider (addr 0x10893146): 0x0000 pll_regs[4].pll_ctrl (addr 0x10893150): 0x0000 pll_regs[4].pll_8kref_divider (addr 0x10893152): 0x0000 pll_regs[4].pll_fback_pre_divider *Nov 21 16:14:58.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:58.811: EHWIC ESWGE I2C read error *Nov 21 16:14:58.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:58.907: EHWIC ESWGE I2C read error *Nov 21 16: (addr 0x10893154): 0x0000 pll_regs[4].pll_fback_post_divider (addr 0x10893156): 0x0000 pll_regs[5].pll_ctrl (addr 0x10893160): 0x0000 pll_regs[5].pll_8kref_divider (addr 0x10893162): 0x0000 pll_regs[5].pll_fback_pre_divider (addr 0x10893164): 0x0000 pll_regs[5].pll_fback_post_divider (addr 0x10893166): 0x0000 pll_regs[6].pll_ctrl (addr 0x10893170): 0x0000 pll_regs[6].pll_8kref_divider (a14:59.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:14:59.587: EHWIC ESWGE I2C read error *Nov 21 16:14:59.667: EHWIC ESWGE I2C read error *Nov 21 16:14:59.815: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:00.495: %ESddr 0x10893172): 0x0000 pll_regs[6].pll_fback_pre_divider (addr 0x10893174): 0x0000 pll_regs[6].pll_fback_post_divider (addr 0x10893176): 0x0000 pll_regs[7].pll_ctrl (addr 0x10893180): 0x0000 pll_regs[7].pll_8kref_divider (addr 0x10893182): 0x0000 pll_regs[7].pll_fback_pre_divider (addr 0x10893184): 0x0000 pll_regs[7].pll_fback_post_divider (addr 0x10893186): 0x0000 io-controller tdm (addr 0x108A0000): io-controlWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:00.495: EHWIC ESWGE I2C read error *Nov 21 16:15:00.575: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:00.575: EHWIC ESWGE I2C read error ler tdm (csm addr 0x108A0000):RR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 tdmsw_enbl_7f_60 (addr 0x108B0000): 0xC0000000 tdmsw_enbl_5f_40 (addr 0x108B0004): 0x05550010 tdmsw_enbl_3f_20 (addr 0x108B0008): 0x01000001 tdmsw_enbl_1f_00 (addr 0x108B000C): 0x00000000 t *Nov 21 16:15:01.255: EHWIC ESWGE I2C read error dmsw_rate_7f_70 (addr 0x108B0010): 0x55555555 tdmsw_rate_6f_60 (addr 0x108B0014): 0x55555555 tdmsw_rate_5f_50 (addr *Nov 21 16:15:01.335: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:01.335: EHWIC ESWGE I2C read error *Nov 21 16:15:01.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:02.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:02.235: EHWI0x108B0018): 0x55556666 tdmsw_rate_4f_40 (addr 0x108B001C): 0x55555455 tdmsw_rate_3f_30 (addr 0x108B0020): 0x55545555 tdmsw_rate_2f_20 C ESWGE I2C read error (addr 0x108B0024): 0x55555555 tdmsw_rate_1f_10 (addr 0x108B0028): 0x55555555 tdmsw *Nov 21 16:15:02.315: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1_rate_0f_00 (addr 0x108B002C): 0x55555555 tdmsw_lpbk_7f_60 (addr 0x108B0030): 0x00000000 tdmsw_lpbk_5f_40 (addr 0x108B0 *Nov 21 16:15:02.315: EHWIC ESWGE I2C read error *Nov 21 16:15:02.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:02.995: EHWIC ESWGE I2C read error *Nov 21 16:15:03.159: EHWIC ESWGE I2C read error *Nov 21 16:15:03.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue 034): 0x00000000 tdmsw_lpbk_3f_20 (addr 0x108B0038): 0x00000000 tdmsw_lpbk_1f_00 (addr 0x108B003C): 0x00000000 tdmsw_ctl (addr 0x108B0040): 0x00000000 tdmsw_csm_err_adrs (addr 0x108B0044): 0x00000000 tdm_mgmt_event (addr 0x108B0050): 0x00000002 tdm_mgmt_enbl (addr 0x108B0054): 0x00000000 tdm_err_event (addr 0x108B0058): 0is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:03.839: EHWIC ESWGE I2C read error *Nov 21 16:15:04.011: EHWIC ESWGE I2C read error *Nov 21 16:15:04.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:04.899: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:04.899: EHWIC ESWGEx00000000 tdm_err_enbl (addr 0x108B005C): 0x00000100 vmcr[0] (addr 0x108B0060): 0x00000000 vmcr[1] (addr 0x108B0064): 0x00000000 vmcr[2] (addr 0x108B0068): 0x00000005 vmcr[3] (addr 0x108B006C): 0x00000005 sm_tdm_cr (addr 0x108B0070): 0x00000000 pvdm_tdm_cr (addr 0x108B0074): 0x000000 I2C read error *Nov 21 16:15:04.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:04.979: EHWIC ESWGE I2C read error *Nov 21 16:15:05.659: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:05.659: EHWIC ESWGE I2C read error *Nov 21 16:15:05.739: %ESWGE_ERR-3-CMDQ_FULL: Command queu06 ntr_cr0 (addr 0x108B0078): 0x00000000 ntr_cr0_aux (addr 0x108B007C): 0x00000000 ntr_cr1 (addr 0x108B0080): 0x00000000 ntr_cr1_aux (addr 0x108B0084): 0x00000000 tpllr_cr (addr 0x108B0088): 0x00000000 ds0_dump_beg_adrs (addr 0x108B0090): 0x00000000 ds0_dump_end_adrs (addr 0x108B0094): 0x00000000 de is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:05.739: EHWIC ESWGE I2C read error *Nov 21 16:15:05.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:06.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:06.595s0_dump_ctl (addr 0x108B0098): 0x00000000 tdm_sync_ctrl_int (addr 0x108B00A0): 0x00000000 tdm_sync_status_int (addr 0x108B00A4): 0x0002D200 io-controller i2c (addr 0x10910000): reg: EHWIC ESWGE I2C read error + adjust (addr 0x10910000): i2c_control (addr 0x10910000): 0x00000480 i2c_scratch (addr 0x10910004): 0xFACEDEAD i2c_status (addr 0x10910008): 0x00000001 i2c_st *Nov 21 16:15:06.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:06.675: EHWIC ESWGE I2C read error *Nov 21 16:15:07.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:07.355: EHWIC ESWGE I2C read error *Nov 21 16:15:07.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmatus_mask (addr 0x1091000C): 0x000003FE i2c_slave_addr (addr 0x10910010): 0x00000075 i2c_slave_sub_addr (addr 0x10910014): 0x00000000 i2c_bitbang_driver (addr 0x10910018): 0x0000000F i2c_data_fifo_rw_ptr (addr 0x10911804): 0x00210000 i2c_dma_start_addr (addr 0x10910020): 0x00000000 i2c_dma_transfer_size (addr 0x10910024): 0x00000000 i2c_dma_next_d Read fail at in slot 1 *Nov 21 16:15:07.435: EHWIC ESWGE I2C read error *Nov 21 16:15:08.207: EHWIC ESWGE I2C read error *Nov 21 16:15:08.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:08.287: EHWIC ESWGE I2C read error *Nov 21 16:15:08.367: %ESWGE_ERR-3-addr (addr 0x10910028): 0x00000000 i2c_dma_remain_trans_size (addr 0x1091002C): 0x00000000 data_fifo_addr (addr 0x10911800): 0x0164957C io-controller i2c (addr 0x10910000): reg + adjust (addr 0x10920000): i2c_control (addr 0x10920000): 0x00010000 i2c_scratch (addr 0x10920004): 0xFACEDEAD i2c_status (addr 0x10920008): 0x00000001 i2c_status_mask CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:09.047: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:09.047: EHWIC ESWGE I2C read error *Nov 21 16:15:09.203: EHWIC ESWGE I2C read error *Nov 21 16:15:09.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1 (addr 0x1092000C): 0x00000000 i2c_slave_addr (addr 0x10920010): 0x00000000 i2c_slave_sub_addr (addr 0x10920014): 0x00000000 i2c_bitbang_driver (addr 0x10920018): 0x0000000F i2c_data_fifo_rw_ptr (addr 0x10921804): 0x00000000 i2c_dma_start_addr (addr 0x10920020): 0x00000000 i2c_dma_transfer_size (addr 0x10920024): 0x00000000 i2c_dma_next_addr 6:15:09.883: EHWIC ESWGE I2C read error *Nov 21 16:15:09.963: EHWIC ESWGE I2C read error *Nov 21 16:15:10.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:10.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:10.811: (addr 0x10920028): 0x00000000 i2c_dma_remain_trans_size (addr 0x1092002C): 0x00000000 data_fifo_addr (addr 0x10921800): 0x0501F591 io-controller i2c (addr 0x10910000): reg + adjust (addr 0x10930000): EHWIC ESWGE I2C read error i2c_control (addr 0x10930000): 0x00010000 i2c_scratch (addr 0x1093000 *Nov 21 16:15:10.891: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 14): 0xFACEDEAD i2c_status (addr 0x10930008): 0x00000001 i2c_status_mask *Nov 21 16:15:10.891: EHWIC ESWGE I2C read error *Nov 21 16:15:11.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:11.571: EHWIC ESWGE I2C read error *Nov 21 16:15:11.651: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:11.651: EHWIC ESWGE I2C read error *Nov 21 16:15:12.331: %ES (addr 0x1093000C): 0x00000000 i2c_slave_addr (addr 0x10930010): 0x00000000 i2c_slave_sub_addr (addr 0x10930014): 0x00000000 i2c_bitbang_driver (addr 0x10930018): 0x0000000F i2c_data_fifo_rw_ptr (addr 0x10931804): 0x00000000 i2c_dma_start_addr (addr 0x10930020): 0x00000000 i2c_dma_transfer_size (addr 0x10930024): 0x00000000 i2c_dma_next_addr (aWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:12.331: EHWIC ESWGE I2C read error *Nov 21 16:15:12.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:12.411: EHWIC ESWGE I2C read error *Nov 21 16:15:12.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Noddr 0x10930028): 0x00000000 i2c_dma_remain_trans_size (addr 0x1093002C): 0x00000000 data_fifo_addr (addr 0x10931800): 0xF1C4334D io-controller i2c (addr 0x10910000): reg + adjust (addr 0x10940000): i2c_control (addr 0x10940000): 0x00010000 i2c_scratch (addr 0x10940004): 0xFACEDEAD i2c_status (addr 0x10940008): 0x00000001 i2c_status_mask (addr 0x1v 21 16:15:13.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:13.271: EHWIC ESWGE I2C read error *Nov 21 16:15:13.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:13.355: EHWIC ESWGE I2C read error *Nov 21 16:15:14.035: EHWIC ESWGE I2C read error *Nov 21 16:15:14.179: EHWIC ES094000C): 0x00000000 i2c_slave_addr (addr 0x10940010): 0x00000000 i2c_slave_sub_addr (addr 0x10940014): 0x00000000 i2c_bitbang_driver (addr 0x10940018): 0x0000000F i2c_data_fifo_rw_ptr (addr 0x10941804): 0x00000000 i2c_dma_start_addr (addr 0x10940020): 0x00000000 i2c_dma_transfer_size (addr 0x10940024): 0x00000000 i2c_dma_next_addr (addr 0x10940028WGE I2C read error *Nov 21 16:15:14.443: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:15.123: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:15.123: EHWIC ESWGE I2C read error *Nov 21 16:15:15.203: %ESWGE_ERR-3-CMDQ_FULL): 0x00000000 i2c_dma_remain_trans_size (addr 0x1094002C): 0x00000000 data_fifo_addr (addr 0x10941800): 0x41A38683 io-controller i2c (addr 0x10910000): reg + adjust (addr 0x10950000): i2c_control : Command queue is Full, I2C cmd Read fail at in slot 1 (addr 0x10950000): 0x00010000 i2c_scratch (addr 0x10950004): 0xFACEDEAD i2c_status (addr 0x10950008): 0x00000001 i2c_status_mask (addr 0x1095000C): 0x00 *Nov 21 16:15:15.203: EHWIC ESWGE I2C read error *Nov 21 16:15:15.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:15.883: EHWIC ESWGE I2C read error *Nov 21 16:15:15.963: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:000000 i2c_slave_addr (addr 0x10950010): 0x00000000 i2c_slave_sub_addr (addr 0x10950014): 0x00000000 i2c_bitbang_driver (addr 0x10950018): 0x0000000F i2c_data_fifo_rw_ptr 15:15.963: EHWIC ESWGE I2C read error (addr 0x10951804): 0x00000000 i2c_dma_start_addr (addr 0x10950020): 0x00000000 i2c_dma_transfer_size (addr 0x10950024): 0x00000000 i2c_dma_next_addr (addr 0x10950028): 0x00000000 *Nov 21 16:15:16.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:16.643: EHWIC ESWGE I2C read error *Nov 21 16:15:16.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:16.723: EHWIC ESWGE I2C read error *Nov 21 16: i2c_dma_remain_trans_size (addr 0x1095002C): 0x00000000 data_fifo_addr (addr 0x10951800): 0x9541BAE6 Crypto Export Restrictions Manager(CERM) Information: CERM functionality: ENABLED ---------------------------------------------------------------- Resource Maximum Limit Available ---------------------------------------------------------------- Tx Bandwidth(in kbps) 85000 85000 Rx Bandwidth(in kbps) 85000 85000 Number of tunnels 15:16.803: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:17.483: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:17.483: EHWIC ESWGE I2C read error *Nov 21 16:15:17.563: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd read error Read fail at in slot 1 *Nov 21 16:15:17.563: EHWIC ESWGE I2C 225 225 Number of TLS sessions 1000 1000 Resource reservation information: D - Dynamic ----------------------------------------------------------------------- Client Tx Bandwidth Rx Bandwidth Tunnels TLS Sessions (in kbps) (in kbps) ----------------------------------------------------------------------- VOICE 0 0 0 0 IPSEC D D 0 N/A SSLVPN D D 0 N/A Statistics information: Failed tunn *Nov 21 16:15:18.243: EHWIC ESWGE I2C read error *Nov 21 16:15:18.363: EHWIC ESWGE I2C read error *Nov 21 16:15:18.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:19.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16els : 0 Failed sessions : 0 Failed tx bandwidth: 0 Failed rx bandwidth: 0 Failed encrypt pkts: 0 Failed decrypt pkts: 0 Failed encrypt pkt bytes: 0 Failed decrypt pkt bytes: 0 Passed encrypt pkts: 0 Passed decrypt pkts: 0 Passed encrypt pkt bytes: 0 Passed decrypt pkt bytes: 0 POWER CONSTANT AND MAX_POWER DETAILS ===================================== Motherboard power constant = 125 Motherboard maximum power = 57.0 W Service-module slot = 1: power constant =5F3,:15:19.151: EHWIC ESWGE I2C read error *Nov 21 16:15:19.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:19.231: EHWIC ESWGE I2C read error *Nov 21 16:15:19.911: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:19.911: EHWIC ESWGE I2C read error *Nov 21 16:15:19.991: %ESWGE_ERR-3-C max_power = 22 ISM power constant = 1523, max_power = 22 ETHSW_SM POE power consumption = 0.0 W PVDM3 Max Power consumption = 6.0 W Platform EHWIC Switch TCAM Software information: STATIC ACL GigabitEthernet0/1/0 MDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 STATIC ACL GigabitEthernet0/1/2 STATIC ACL GigabitEthernet0/1/3 STATIC ACL GigabitEthernet0/1/4 STATIC ACL GigabitEthernet0/1/5 STATIC ACL GigabitEthernet0/1/6 STATIC ACL GigabitEthernet0/1/7 ------------------ show environment table ---- *Nov 21 16:15:19.991: EHWIC ESWGE I2C read error *Nov 21 16:15:20.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:20.671: EHWIC ESWGE I2C read error *Nov 21 16:15:20.751: %ESWGE_ERR-3-CMDQ_FULL: Comm-------------- SYSTEM POWER SUPPLY STATUS ========================== Power Supply Type: AC-POE Power Supply 12V Output Status: Normal Power Supply POE -48V Voltage Status: Normal SYSTEM FAN STATUSand queue is Full, I2C cmd Read fail at in slot 1 ================= System Fan OK, fan level 2, Medium speed setting, 2496 RPM, 58% PWM SYSTEM TEMPERATURE STATUS ========================= Exhaust Fan temperature: 33 Celsius, Normal Intake Right(Bezel) temperature: 26 Celsius, Normal Intake Right temperature: 27 Celsius, Normal CPU temperature: 61 Cel *Nov 21 16:15:20.751: EHWIC ESWGE I2C read error *Nov 21 16:15:20.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:21.511: %ESWGE_ERR-3-Csius, Normal REAL TIME CLOCK BATTERY STATUS ============================== Battery OK (checked at power up) SYSTEM ALARMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1MS SETTINGS ====================== System fan failure results in warning CPU Warning Over Temperature Alarm = 100C CPU Cri *Nov 21 16:15:21.511: EHWIC ESWGE I2C read error tical Over Temperature Alarm = 120C Exhaust Fan Over Temperature Alarm = 75C Intake Right(Bezel) Over Temperature Alarm = 42C Intake Right Over Temperature Alarm = 42C SYSTEM VOLTAGES =============== 12V voltage = 12.165 V, Normal 5V voltag *Nov 21 16:15:21.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:21.591: EHWIC ESWGE I2C read error *Nov 21 16:15:22.355: EHWIC ESWGE I2C read error *Nov 21 16:15:22.619: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:e = 5.166 V, Normal 3.3V voltage = 3.352 V, Normal 2.5V voltage = 2.509 V, Normal 1.8V voltage = 1.830 V, Normal 1.2V voltage = 1.199 V, Normal ASIC voltage = 1.049 V, Normal CPU Core voltage = 1.099 V, Normal SYSTEM POWER =============== 15:22.619: EHWIC ESWGE I2C read error Motherboard Components Power consumption = 47.6 WPower consumption = ISM 0.0 W PoE usage 30.3 W Total System Power consumption is: 77.9 W Environmental information last updated 00:00:13 ago ENVIRONMENTAL STRESS EVENTS ===================== *Nov 21 16:15:22.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:23.379: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:23.379: EHWIC ESWGE I2C read error *Nov 21 16:15:23.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue i====== Critical Temperature: Maxium = 0 Total Duration = 0 Exceed Fan Tray Removal Time: Maximum Time= 0 Total Time = 0 Total MCU access error count: 0 ------ ENVIRONMENTAL CONTROLLER REGISTERS ------ REG: 0x0 : 0x405 REG: 0x1 : 0x101 REG: 0x2 : 0x300 REG: 0x3 : 0x21 REG: 0x4 : 0x22 REG: 0x5 : 0x1A REG: 0x6 : 0x1B REG: 0x7 : 0x9C0 REG: 0x8 : 0x0 REG: 0x9 : 0x0 REG: 0xA : 0x0 REG: 0xB : 0x0 REG: 0xC : 0x2E REG: 0xD : 0x40 REG: 0xEs Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:23.459: EHWIC ESWGE I2C read error *Nov 21 16:15:24.139: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:24.139: EHWIC ESWGE I2C read error *Nov 21 16:15:24.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd : 0x81BD REG: 0xF : 0x4100 REG: 0x10 : 0x19 REG: 0x11 : 0x1C REG: 0x12 : 0x1E REG: 0x13 : 0x21 REG: 0x14 : 0x32 REG: 0x15 : 0x3A REG: 0x16 : 0x42 REG: 0x17 : 0x32 REG: 0x18 : 0x3A REG: 0x19 : 0x42 REG: 0x1A : 0x32 REG: 0x1B : 0x3A REG: 0x1C : 0x42 REG: 0x1D : 0x32 REG: 0x1E : 0x3A REG: 0x1F : 0x42 REG: 0x20 : 0x32 REG: 0x21 : 0x3A REG: 0x22 : 0x42 REG: 0x23 : 0x3E8 REG: 0x24 : 0x2 REG: 0x25 : 0x258 REG: 0x26 : 0xB4 REG: 0x27 : 0x4B REG: 0x28 : 0x4B REG: 0x29 : 0x2A REG: 0x2A : Read fail at in slot 1 *Nov 21 16:15:24.219: EHWIC ESWGE I2C read error *Nov 21 16:15:24.899: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:24.899: EHWIC ESWGE I2C read error *Nov 21 16:15:24.979: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:24.979: EHWIC ESWGE I2C read error 0x2A REG: 0x2B : 0x3C REG: 0x2C : 0x0 REG: 0x2D : 0xF REG: 0x2E : 0x0 REG: 0x2F : 0x0 REG: 0x30 : 0x3E8 REG: 0x31 : 0x3E8 REG: 0x32 : 0xC8 REG: 0x33 : 0x32 REG: 0x34 : 0x23 REG: 0x35 : 0x26 REG: 0x36 : 0x28 REG: 0x37 : 0x2B REG: 0x38 : 0x62 REG: 0x39 : 0x62 REG: 0x3A : 0x62 REG: 0x3B : 0x62 REG: 0x3C : 0x62 REG: 0x3D : 0x62 REG: 0x3E : 0x62 REG: 0x3F : 0x62 REG: 0x40 : 0x62 REG: 0x41 : 0x62 REG: 0x42 : 0x0 REG: 0x43 : 0xull, I2C cmd Read fail at in slot 128 REG: 0x44 : 0x22 REG: 0x45 : 0x24 REG: 0x46 : 0x22 REG:*Nov 21 16:15:25.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:25.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:25.739: EHWIC ESWGE I2C read error *Nov 21 16:15:25.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is F 0x47 : 0x1A REG: 0x48 : 0x9 REG: 0x49 : 0x0 REG: 0x4A : 0x9 REG: 0x4B : 0x6 ------ CURRENT TEMPERATURE SENSOR REGISTERS ------ REG: 0x0 : 0x29 REG: 0x1 : 0x3D REG: 0x2 : 0x0 REG: 0x3 : 0x0 REG: 0x4 : 0x4 REG: 0x5 : 0x7F REG: 0x6 : 0xC9 REG: *Nov 21 16:15:25.819: EHWIC ESWGE I2C read error 0x7 : 0x78 REG: 0x8 : 0xC9 ------- POWER SEQUENCER REGS ------- REG: 0x0 : 0x305 REG: 0x1 : 0x2400 REG: 0x2 : 0x2400 REG: 0x3 : 0x0 REG: 0x4 : 0x0 REG: 0x5 : 0x0 REG: 0x6 : 0x33 REG: 0x7 : 0x44FE REG: 0x8 : 0x301 REG: 0x9 : 0x305 REG: 0xA *Nov 21 16:15:26.579: EHWIC ESWGE I2C read error *Nov 21 16:15:26.659: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:26.659: EHWIC ESWGE I2C read error *Nov 21 16:15:26.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16 : 0x2FF REG: 0xB : 0x2EE REG: 0xC : 0x2EF REG: 0xD : 0x2EC REG: 0xE : 0x311 REG: 0xF : 0x312 REG: 0x10 : 0x310 REG: 0x11 : 0x319 REG: 0x12 : 0x31B REG: 0x13 : 0x318 REG: 0x14 : 0x2B5:15:27.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 REG: 0x15 : 0x2B7 REG: 0x16 : 0x2B3 REG: 0x17 : 0xBE REG: 0x18 : 0x100 REG: 0x19 : 0x6B REG: 0x1A : 0x1C7 REG: 0x1B : 0x1CA REG: 0x1C : 0x1C6 REG: 0x1D : 0x1A2 REG: 0x1E : 0x1A4 REG: 0x1F : 0x19F REG: 0x20 : 0x18F REG: 0x21 : 0x191 REG: 0x22 : 0x18D REG: 0x23 : 0x0 REG: 0x24 : 0x0 REG: 0x25 : 0x0 R *Nov 21 16:15:27.419: EHWIC ESWGE I2C read error *Nov 21 16:15:27.579: EHWIC ESWGE I2C read error *Nov 21 16:15:28.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 EG: 0x26 : 0x028.259: EHWIC ESWGE I2C read error REG: 0x27 : 0x0 REG: 0x28 : 0x0 REG: 0x29 : 0x0 REG: 0x2A : 0x0 REG: 0x2B : 0x0 REG: 0x2C : 0x0 REG: 0x2D : 0x0 REG: 0x2E : 0x78 REG: 0x2F : 0x0 REG: 0x30 : 0x0 REG: 0x31 : 0xFA00 REG: 0x32 : 0x905 REG: 0x33 : 0x904 REG: 0x34 : 0x903 REG: 0x35 : 0x903 REG: 0x36 : 0xC03 REG: 0x37 : 0x903 REG: 0x38 : 0x1 REG: 0x39 : 0x0 REG: 0x3A : 0x0 REG: 0x3B : 0x0 REG: 0x3C : 0x0 REG: 0x3D : 0x0 REG: 0x3E : 0x0 REG: 0x3F : 0x0 REG: 0x40 : 0x0 REG: 0x41 : 0x0 REG: 0x42 : 0x0 REG *Nov 21 16:15:28.339: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:28.339: EHWIC ESWGE I2C read error *Nov 21 16:15:29.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:29.019: EHWIC ESWGE I2C read error *Nov 21 16:15:: 0x43 : 0x0 ------------------ service-module Embedded-Service-Engine0/0 status ------------------ Service Module is Cisco Embedded-Service-Engine0/0 Service Module supports session via TTY line 2 Service Module heartbeat-reset is enabled Embedded Service Engine boot state is RESET No install/uninstall in progress ------------------ show controllers t1 ------------------ ------------------ show controllers e1 ------------------ ------------------ show controllers j1 ---------29.099: EHWIC ESWGE I2C read error *Nov 21 16:15:29.207: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:29.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:29in slot 1.887: EHWIC ESWGE I2C read error *Nov 21 16:15:29.967: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at --------- ------------------ show cdp neighbor ------------------ Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA, M - Two-port Mac Relay Device ID Local Intrfce Holdtme Capability Platform Port ID Total cdp entries displayed : 0 ------------------ show cdp neighbor detail ------------------ Total cdp entries displayed : 0 *Nov 21 16:15:29.967: EHWIC ESWGE I2C read error *Nov 21 16:15:30.647: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:30.647: EHWIC ESWGE I2C read error *Nov 21 16:15:30.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:30.727: EHWIC ESWGE I2C read error *Nov 21 16:15:30.807: ------------------ show ip nbar version ------------------ NBAR software version: 16 NBAR minimum backward compatible version: 13 1 base Mv: 4 2 ftp Mv: 4 3 http Mv: 17 Iv: irc - 2 4 static Mv: 6 5 secure-http Mv: 4 6 netbios Mv: 1 7 socks Mv: 2 8 nn%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:31.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:31.627: EHWIC ESWGE I2C read error *Nov 21 16:15:31.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read faitp Mv: 2 9 tftp Mv: 2 10 exchange Mv: 3 11 vdolive Mv: 1 12 sqlnet l at in slot 1 Mv: 2 13 netshow Mv: 3 14 sunrpc Mv: 3 15 streamwork *Nov 21 16:15:31.707: EHWIC ESWGE I2C read error Mv: 2 16 citrix Mv: 13 17 fasttrack Mv: 3 18 gnutella Mv: 7 19 kazaa2 *Nov 21 16:15:32.471: EHWIC ESWGE I2C read error *Nov 21 16:15:32.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:32.667: EHWIC ESWGE I2C read error *Nov 21 16:15:33.471: EHWIC ESWGE I2C read error *Nov 21 16:15:33.679: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Mv: 11 20 dhcp Mv: 1 21 rtsp Mv: 9 22 rtp Mv: 8 23 mgcp Mv: 2 24 skinny Mv: 3 25 h323 Mv: 1 26 sip Mv: 4 27 rtcp Mv: 4 28 edonkey Mv: 6 29 winmx Mv: 5 30 bittorrent Mv: 5 Iv: Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:33.679: EHWIC ESWGE I2C read error *Nov 21 16:15:33.759: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:34.495: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:34.495: EHWIC ESWGE I2C read error *Nov 21 16:15:34.575: EHWIC ESWGE I2C read error socks - 2 31 directconnect Mv: 4 32 imap Mv: 1 33 pop3 Mv: 1 34 irc Mv: 2 Iv: http - 17 35 smtp Mv: 1 36 dns Mv: 1 37 skype Mv: 5 38 sap Mv: 1 39 pptp Mv: 1 40 ntp *Nov 21 16:15:34.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:35.431: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:35.431: EHWIC ESWGE I2C read error d Read fail at in slot 1*Nov 21 16:15:35.511: EHWIC ESWGE I2C read error *Nov 21 16:15:36.191: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm Mv: 1 41 iana Mv: 1 42 custom-protocols Mv: 1 {} Mv: , {Nv: ; } {Iv: - } ------------------ show webvpn session context all ------------------ ------------------ show webvpn stats detail ------------------ User session statistics: Active user sessions : 0 AAA pending reqs *Nov 21 16:15:36.191: EHWIC ESWGE I2C read error *Nov 21 16:15:36.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:36.271: EHWIC ESWGE I2C read error *Nov 21 16:15:36.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: 0 Peak user sessions : 0 Peak time : never Active user TCP conns : 0 Terminated user sessions : 0 Session alloc failures : 0 Authentication failures : 0 VPN session timeout : 0 VPN idle timeout : 0 User cleared VPN sessions: 0 Exceeded ctx user limit : 0 Exceeded total user limit: 0 Client process rcvd pkts : 0 Server proce:15:36.951: EHWIC ESWGE I2C read error *Nov 21 16:15:37.031: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:37.031: EHWIC ESWGE I2C read error *Nov 21 16:15:37.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:37.711: ss rcvd pkts : 0 Client process sent pkts : 0 Server process sent pkts : 0 Client CEF received pkts : 0 Server CEF received pkts : 0 Client CEF rcv punt pkts : 0 Server CEF rcv punt pkts : EHWIC ESWGE I2C read error 0 Client CEF sent pkts : 0 Server CEF sent pkts : 0 Client CEF sent punt pkts: 0 Server CEF sent punt pkts: 0 SSLVPN appl bufs inuse : 0 SSLVPN eng bufs inuse : 0 *Nov 21 16:15:37.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:37.791: EHWIC ESWGE I2C read error *Nov 21 16:15:37.951: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:38.743: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:38.743: EHWI Active server TCP conns : 0 Mangling statistics: Relative urls : 0 Absolute urls C ESWGE I2C read error : 0 Non-http(s) absolute urls: 0 Non-standard path urls : 0 Interesting tags : 0 Uninteresting tags : 0 Interesting attributes : 0 Uninteresting attributes : 0 Embedded script statement: 0 Embedded style statement : 0 Inline scripts : 0 *Nov 21 16:15:38.823: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:38.823: EHWIC ESWGE I2C read error *Nov 21 16:15:38.903: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:39.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Inline styles : 0 HTML comments Full, I2C cmd Read fail at in slot 1 : 0 HTTP/1.0 requests : 0 HTTP/1.1 requests : 0 Unknown HTTP version : 0 GET requests : 0 POST requests : 0 CONNECT requests : 0 Other request methods : 0 Through requests : 0 Gateway requests : 0 Pipelined requests : 0 Req with header si *Nov 21 16:15:39.727: EHWIC ESWGE I2C read error *Nov 21 16:15:39.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:39.807: EHWIC ESWGE I2C read error *Nov 21 16:15:40.487: EHWIC ESWGE I2C read error *Nov 21 16:15:40.607: EHWIC ESWGE I2C read error *Nov 21 16ze >1K : 0 Processed req hdr bytes : 0 Processed req body bytes : 0 HTTP/1.0 responses : 0 HTTP/1.1 responses : 0 HTML responses : 0 CSS responses : 0 XML responses : 0 JS responses : 0 Other content type resp : 0 Chunked encoding resp : 0 Resp with encoded content: 0 Resp with content length : 0 :15:41.299: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:41.299: EHWIC ESWGE I2C read error *Nov 21 16:15:41.379: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:41.379: EHWIC ESWGE I2C read error *Nov 21 16:15:42.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail Close after response : 0 Resp with header size >1K: 0 Processed resp hdr size : 0 Processed resp body bytes: 0 Backend https response : 0 Chunked encoding requests: 0 HTTP Authentication stats : Successful NTLM Auth : 0 Failed NTLM Auth : 0 Successful Basic Auth : 0 Failed Basic Auth : 0 Unsupported Auth : 0 Unsup Basic HTTP Method : 0 at in slot 1 *Nov 21 16:15:42.059: EHWIC ESWGE I2C read error *Nov 21 16:15:42.139: EHWIC ESWGE I2C read error *Nov 21 16:15:42.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:42.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 NTLM srv kp alive disabld: 0 NTLM Negotiation Error : 0 Oversize NTLM Type3 cred : 0 Internal Error : 0 Num 401 responses *Nov 21 16:15:42.915: EHWIC ESWGE I2C read error : 0 Num non-401 responses : 0 Num Basic forms served : 0 Num NTLM forms served : 0 *Nov 21 16:15:42.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Num Basic Auth sent : 0 Num NTLM Auth sent : 0 CIFS statistics: SMB related Per Context: TCP VC's : 0 UDP VC's *Nov 21 16:15:42.995: EHWIC ESWGE I2C read error *Nov 21 16:15:43.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:43.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:43.755: EHWIC ESWGE I2C read error *Nov 21 1 : 0 Active VC's : 0 Active Contexts : 0 Aborted Conns : 0 NetBIOS related Per Context: Name Queries : 0 Name Replies : 0 6:15:43.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 NB DGM Requests : 0 NB DGM Replies : 0 NB TCP Connect Fails : 0 NB Name Resolution Fails : 0 SMB related Global: Sessions in use : 0 Mbufs in use *Nov 21 16:15:43.835: EHWIC ESWGE I2C read error *Nov 21 16:15:44.599: EHWIC ESWGE I2C read error *Nov 21 16:15:44.807: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:44.807: EHWIC ESWGE I2C read error *Nov 21 16:15:45.487: %ESWGE_ERR-3-CMDQ_FULL: Command queue i : 0 Mbuf Chains in use : 0 Active VC's : 0 Active Contexts : 0 Browse Errors : 0 Empty Browser List : 0 NetServEnum Errors : 0 Empty Server List : 0 NBNS Config Errors : 0 NetShareEnum Errors : 0 HTTP related Per Context: Requests : 0 Request Bytes RX : 0 Request Packes Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:45.487: EHWIC ESWGE I2C read error *Nov 21 16:15:45.567: EHWIC ESWGE I2C read error *Nov 21 16:15:46.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:46.247: EHWIC ESWGE I2C read error *Nov 21 16:15:46.327: ts RX : 0 Response Bytes TX : 0 Response Packets TX : 0 Active Connections : 0 Active CIFS context : 0 Requests Dropped : 0 HTTP related Global: Server User data : 0 CIFS User data : 0 Net Handles : 0 Active CIFS context : 0 Authentication Fails : 0 Operations Aborted : 0 Timers Expired%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:46.327: EHWIC ESWGE I2C read error *Nov 21 16:15:46.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:47.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:47.115: EHWIC ESWGE I2C read error : 0 Pending Close : 0 Net Handles Pending SMB : 0 File Open Fails : 0 Browse Network Ops : 0 Browse Network Fails : 0 Browse Domain Ops : 0 Browse Domain Fails : 0 Browse Server Ops : 0 Browse Server Fails : 0 Browse Share Ops : 0 Browse Share Fails : 0 Browse Dir Ops : 0 B *Nov 21 16:15:47.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:47.195: EHWIC ESWGE I2C read error *Nov 21 16:15:47.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:48.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:48.023: Erowse Network Fails : 0 File Read Ops : 0 File Read Fails : 0 File Write Ops : 0 File Write Fails : 0 Folder Create Ops : 0 Folder Create HWIC ESWGE I2C read error Fails : 0 File Delete Ops : 0 File Delete Fails : 0 File Rename Ops : 0 File Rename Fails : 0 URL List Access OK : 0 URL List Access Fails : *Nov 21 16:15:48.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:48.103: EHWIC ESWGE I2C read error *Nov 21 16:15:48.783: EHWIC ESWGE I2C read error *Nov 21 16:15:48.887: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 0 Socket statistics: Sockets in use : 1 Sock Usr Blocks in use : 1 Sock Data Buffers in use : 0 Sock Buf desc in use : 0 Select timers in use : 1 Sock Select Timeouts : 0 Sock Tx Blocked : 0 Sock Tx Unblocked : 0 Sock Rx Blocked : 0 Sock Rx Unblocked : 0 Sock UDP Connects : 0 Sock UDP Disconnects : 0 :15:48.887: EHWIC ESWGE I2C read error *Nov 21 16:15:49.567: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:49.567: EHWIC ESWGE I2C read error *Nov 21 16:15:49.723: EHWIC ESWGE I2C read error *Nov 21 16:15:50.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C Sock Premature Close : 0 Sock Pipe Errors : 0 Sock Select Timeout Errs : 0 Smart Tunnel statistics: Client Server proc pkts : 0 proc pkts : 0 proc bytes : 0 proc bytes : 0 cef pkts : 0 cef pkts : 0 cef bytes : 0 cef bytes cmd Read fail at in slot 1 *Nov 21 16:15:50.403: EHWIC ESWGE I2C read error *Nov 21 16:15:50.483: EHWIC ESWGE I2C read error *Nov 21 16:15:50.631: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:51.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:51.311: EHWIC ESWGE I2C read err : 0 Port Forward statistics: Client Server proc pkts : 0 proc pkts : 0 proc bytes : 0 proc bytes : 0 cef pkts : 0 cef pkts : 0 cef bytes : 0 cef bytes : 0 WEBVPN Citrix statistics: C cmd Read fail at in slot 1 or *Nov 21 16:15:51.391: EHWIC ESWGE I2C read error *Nov 21 16:15:51.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:52.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:52.231: EHWIC ESWGE I2C read error *Nov 21 16:15:52.311: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2 Server Client Packets in : 0 0 Packets out : 0 0 Bytes in : 0 0 Bytes out : 0 0 *Nov 21 16:15:52.311: EHWIC ESWGE I2C read error ACL statistics: Permit web request : 0 Deny web request : 0 Permit cifs request : 0 Deny cifs request : 0 Permit without ACL : 0 Deny without matc *Nov 21 16:15:52.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:52.991: EHWIC ESWGE I2C read error *Nov 21 16:15:53.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nh ACL : 0 Permit with match ACL : 0 Deny with match ACL : 0 Single Sign On statistics: Auth Requests : 0 Pending Auth Requests : 0 Successful Requests : 0 Fov 21 16:15:53.071: EHWIC ESWGE I2C read error ailed Requests : 0 Retranmissions : 0 DNS Errors : 0 Connection Errors : 0 Request Timeouts : 0 Unknown Responses : 0 URL-rewri *Nov 21 16:15:53.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:53.751: EHWIC ESWGE I2C read error *Nov 21 16:15:53.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:53.831: EHWIC ESWGE I2C read error *Nov 21 16:1te splitter statistics: Direct access request : 0 Redirect request : 0 Internal request : 0 Tunnel Statistics: Active connection5:54.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1s : 0 Peak connections : 0 Peak time : never Connect succeed : 0 Connect failed : 0 Reconnect succeed : 0 Reconnect failed : 0 SVCIP install IOS succeed: 0 SVCIP install IOS *Nov 21 16:15:54.511: EHWIC ESWGE I2C read error *Nov 21 16:15:54.695: EHWIC ESWGE I2C read error *Nov 21 16:15:54.959: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:55.639: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16 failed : 0 SVCIP clear IOS succeed : 0 SVCIP clear IOS failed : 0 SVCIP install TCP succeed: 0 SVCIP install TCP failed : 0 DPD timeout : 0 DTLS packet drop : 0 Client in CSTP frames : 0 in CSTP control : 0 in CSTP data : 0 in CSTP bytes :15:55.639: EHWIC ESWGE I2C read error *Nov 21 16:15:55.719: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:55.719: EHWIC ESWGE I2C read error *Nov 21 16:15:55.943: %ESWGE_ERR-3-CMDQ_FULL: Command queue is FuSWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ll, I2C cmd Write fail at in slot 1 *Nov 21 16:15:56.623: %E : 0 in CSTP Addr Reqs : 0 in CSTP DPD Reqs : 0 in CSTP DPD Resps : 0 in CSTP Msg Reqs : 0 out CSTP frames : 0 out CSTP control : 0 out CSTP data : 0 out CSTP bytes : 0 out CSTP Addr Resps : 0 out CSTP DPD Reqs : 0 out CSTP DPD Resps : 0 out CSTP Msg Reqs : 0 in *Nov 21 16:15:56.623: EHWIC ESWGE I2C read error *Nov 21 16:15:56.703: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:56.703: EHWIC ESWGE I2C read error *Nov 21 16:15:57.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:CDTP frames : 0 in CDTP control : 0 in CDTP data : 0 in CDTP bytes : 0 out CDTP frames : 0 out CDTP control : 0 out CDTP data : 0 out CDTP bytes : 0 cef in CSTP data frames : 0 cef in CSTP data bytes : 0 cef out CSTP data frames : 0 cef out CSTP data bytes : 0 cef in CDTP data frames : 0 15:57.383: EHWIC ESWGE I2C read error *Nov 21 16:15:57.463: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:57.463: EHWIC ESWGE I2C read error *Nov 21 16:15:58.159: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:58.159: EH cef in CDTP data bytes : 0 cef out CDTP data frames : 0 cef out CDTP data bytes : 0 Server In IP pkts : 0 In IP bytes : 0 In congested pkts : 0 In bad pkts : 0 In forwarded pkts : 0 In non fwded pkts : 0 WIC ESWGE I2C read error Out IP pkts : 0 Out IP bytes : 0 Out bad pkts : 0 Out fi *Nov 21 16:15:58.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:58.251: EHWIC ESWGE I2C read error *Nov 21 16:15:58.931: EHWIC ESWGE I2C read error *Nov 21 16:15:59.011: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:59.011: EHWIC ESWGE I2C read error *Nov 21 16:15:59.091: ltered pkts : 0 Out non forwaded pkts : 0 Out forwarded pkts : 0 ------------------ show webvpn stats context all ------------------ ------------------ show webvpn nbns context all ------------------ ------------------ show webvpn stats cifs ------------------ CIFS statistics: SMB related Per Context: TCP VC's : 0 UDP VC's : 0 Active VC's : 0 Active Co%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:15:59.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:15:59.771: EHWIC ESWGE I2C read error *Nov 21 16:15:59.935: EHWIC ESWGE I2C read error *Nov 21 16:16:00.015: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:00.695: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ntexts : 0 Aborted Conns : 0 NetBIOS related Per Context: Name Queries : 0 Name Replies : 0 NB DGM Requests : 0 NB DGM Replies : 0 NB TCP Connect Fails : 0 NB Name Resolution Fails : 0 SMB related Global: Sessions in use : 0 Mbufs in use : 0 Mbuf Chains in use : 0 Active VC's *Nov 21 16:16:00.695: EHWIC ESWGE I2C read error *Nov 21 16:16:00.775: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:00.775: EHWIC ESWGE I2C read error *Nov 21 16:16:01.455: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 : 0 Active Contexts : 0 Browse Errors : 0 Empty Browser List : 0 NetServEnum Errors : 0 Empty Server List : 0 NBNS Config Errors : 0 NetShareEnum Errors : 0 HTTP related Per Context: Requests : 0 Request Bytes RX : 0 Request Packets RX : 0 Response Bytes TX : 0 Response *Nov 21 16:16:01.455: EHWIC ESWGE I2C read error *Nov 21 16:16:01.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:01.535: EHWIC ESWGE I2C read error *Nov 21 16:16:02.215: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16: Packets TX : 0 Active Connections : 0 Active CIFS context : 0 Requests Dropped : 0 HTTP related Global: Server User data : 0 CIFS User data : 0 Net Handles : 0 Active CIFS context : 0 Authentication Fails : 0 Operations Aborted : 0 Timers Expired : 0 Pending Close : 0 Net Handl16:02.215: EHWIC ESWGE I2C read error *Nov 21 16:16:02.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:02.295: EHWIC ESWGE I2C read error *Nov 21 16:16:02.975: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:02.975: EHWIC ESWGE I2C read error *Nov 21 16:16:03.055: %ESWGE_ERR-3-es Pending SMB : 0 File Open Fails : 0 Browse Network Ops : 0 Browse Network Fails : 0 Browse Domain Ops : 0 Browse Domain Fails : 0 Browse Server Ops : 0 Browse Server Fails : 0 BrowseCMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Share Ops : 0 Browse Share Fails : 0 Browse Dir Ops : 0 Browse Network Fails : 0 File Read Ops : 0 *Nov 21 16:16:03.055: EHWIC ESWGE I2C read error *Nov 21 16:16:03.191: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:03.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:03.991: EHWIC ESWGE I2C read error *Nov 21 16 File Read Fails : 0 File Write Ops : 0 File Write Fails : 0 Folder Create Ops : 0 Folder Create Fails ::16:04.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 File Delete Ops : 0 File Delete Fails : 0 File Rename Ops : 0 *Nov 21 16:16:04.071: EHWIC ESWGE I2C read error File Rename Fails : 0 URL List Access OK : 0 URL List Access Fails : 0 ------------------ show webvpn stats sock ----------------- *Nov 21 16:16:04.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:04.923: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:04.923: EHWIC ESWGE I2C read error *Nov 21 16:16:05.003: %ESWGE_ERR-3-CMDQ_FULL: Command queue i- Socket statistics: Sockets in use : 1 Sock Usr Blocks in use : 1 Sock Data Buffers in use : 0 Sock Buf desc in use : 0 Select timers in use : 1 Sock Select Timeouts s Full, I2C cmd Read fail at in slot 1: 0 Sock Tx Blocked : 0 Sock Tx Unblocked : 0 Sock Rx Blocked : 0 Sock Rx Unblocked : 0 Sock UDP Connects : 0 Sock UDP Disconnects : 0 *Nov 21 16:16:05.003: EHWIC ESWGE I2C read error *Nov 21 16:16:05.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:05.683: EHWIC ESWGE I2C read error *Nov 21 16:16:05.903: EHWIC ESWGE I2C read error *Nov 21 16:16:06.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue Sock Premature Close : 0 Sock Pipe Errors : 0 Sock Select Timeout Errs : 0 ------------------ show raw reclaimed ------------------ RAW LEAK REPORT: ORPHAN : 0 raw buffers reclaimed TSP : 0 raw buffers reclaimed VTSP : 0 raw buffers reclaimed H323 : 0 raw buffers reclaimed SIP : 0 raw buffers reclaimed CCAPI : 0 raw buffers reclaimed VOATM : 0 raw buffers reclis Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:06.587: EHWIC ESWGE I2C read error *Nov 21 16:16:06.667: EHWIC ESWGE I2C read error *Nov 21 16:16:07.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:07.347: EHWIC ESWGE I2C read error *Nov 21 16:16:07.427: EHWIC ESWGE I2C read error *Nov 21 16:16:07.611: %ESWGE_ERR-3-aimed XGCP : 0 raw buffers reclaimed CAS : 0 raw buffers reclaimed IVR : 0 raw buffers reclaimed SSAPP : 0 raw buffers reclaimed : 0 raw buffers reclaimed Last Audit Session is at 21:14:31 PST Fri Nov 21 2014 ------------------ show crypto key mypubkey rsa ------------------ ------------------ show crypto call admission statistics ------------------ --------------------------------------------------------------------- CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:08.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:08.291: EHWIC ESWGE I2C read error *Nov 21 16:16:08.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:08.371: EHWIC ESWGE I2C read error *Nov 21 16 Crypto Call Admission Control Statistics --------------------------------------------------------------------- System Resource Limit: 0 Max IKE SAs: 0 Max in nego: 1000 Total IKE SA Count: 1 active: 0 negotiating: 1 Incoming IKE Requests: 0 accepted: 0 rejected: 0 Outgoing IKE Requests: 17 accepted: 17 rejected: 0 Rejected IKE Requests: 0 rsrc low: 0 Active SA limit: 0 :16:08.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:09.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:09.131: EHWIC ESWGE I2C read error *Nov 21 16:16:09.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C In-neg SA limit: 0 IKE packets dropped at dispatch: 0 Max IPSEC SAs: 0 Total IPSEC SA Count: 0 active: 0 negotiating: 0 Incoming IPScmd Read fail at in slot 1EC Requests: 0 accepted: 0 rejected: 0 Outgoing IPSEC Requests: 0 accepted: 0 rejected: *Nov 21 16:16:09.211: EHWIC ESWGE I2C read error 0 Phase1.5 SAs under negotiation: 0 ------------------ show crypto gdoi ------------------ ------------------ show crypto gdoi rekey sa ------------------ GETVP *Nov 21 16:16:09.891: EHWIC ESWGE I2C read error *Nov 21 16:16:10.059: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:10.059: EHWIC ESWGE I2C read error *Nov 21 16:16:10.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:N REKEY SA dst src conn-id status ------------------ show crypto gdoi rekey sa detail ------------------ KEK SA DB STATS: num_active = 0 num_malloc = 0 num_free = 0 ------------------ show crypto gdoi gm ------------------ ------------------ show crypto gdoi gm acl ------------------ ------------------ show crypto gdoi gm pubkey ------------------ ------------------ show crypto gdoi gm rekey detail ------------------ 16:10.739: EHWIC ESWGE I2C read error *Nov 21 16:16:10.819: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:10.819: EHWIC ESWGE I2C read error *Nov 21 16:16:11.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:11.499: EHWIC ESWGE I2C read error *Nov 21 16:16:11.579: EHWIC ESWGE I ------------------ show crypto gdoi gm replay ------------------ ------------------ show crypto gdoi ipsec sa ------------------ ------------------ show crypto gdoi ks ------------------ Total group members registered to this box: 0 ------------------ show crypto gdoi ks acl ------------------ ------------------ show crypto gdoi ks coop ------------------ ------------------ show crypto gdoi ks coop version ------------------ Cooperative key server infra 2C read error *Nov 21 16:16:11.791: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:12.471: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:12.471: EHWIC ESWGE I2C read error *Nov 21 16:16:12.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 Version : 1.0.8 Client : KS_POLICY_CLIENT Version : 1.0.1 Client : GROUP_MEMBER_CLIENT Version : 1.0.1 Client : SID_CLIENT Version : 1.0.1 ------------------ show crypto gdoi ks identifier detail ------------------ ------------------ show crypto gdoi ks member ------------------ Group Member Information : ------------------ show crypto gdoi ks policy ------------------ ------------------ show crypto gdoi ks rekey ------------------ ---16:16:12.551: EHWIC ESWGE I2C read error *Nov 21 16:16:12.727: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:13.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:13.407: EHWIC ESWGE I2C read error *Nov 21 16:16:13.48--------------- show crypto gdoi ks replay ------------------ ------------------ show crypto gdoi diagnose events ------------------ ------------------ show crypto gdoi diagnos7: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1e errors ------------------ ------------------ show crypto engine configuration ------------------ crypt *Nov 21 16:16:13.487: EHWIC ESWGE I2C read error o engine name: Virtual Private Network (VPN) Module crypto engine type: hardware State: Enabled Location: onboard 0 Produc *Nov 21 16:16:14.167: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:14.167: EHWIC ESWGE I2C read error *Nov 21 16:16:14.247: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:14.247: EHWIC ESWGE I2C read error *Nov 21 16t Name: Onboard-VPN HW Version: 1.0 Compression: Yes DES: Yes 3 DES: Yes AES CBC: Yes (128,192,256) AES CNTR: No Maximum buffer length: 0000 Maximum DH index: 0000 Maximum SA index: 0000 Maximum Flow index: 2800 Maximum RSA key size: 0000 crypto lib version: 22_421.0.0 crypto engine in slot: 0 pl:16:14.927: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:14.927: EHWIC ESWGE I2C read error *Nov 21 16:16:15.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:15.151: EHWIC ESWGE I2C read error *Nov 21 16:16:15.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read failatform: VPN hardware accelerator crypto lib version: 22_421.0.0 ------------------ show crypto engine accelerator statistic ------------------ Device: Onboard VPN Location: Onboard: 0 :Statistics for encryption device since the last clear of counters 1135 seconds ago 0 packets in 0 packets out 0 bytes in 0 bytes out 0 paks/sec in at in slot 1 *Nov 21 16:16:15.851: EHWIC ESWGE I2C read error *Nov 21 16:16:16.059: EHWIC ESWGE I2C read error *Nov 21 16:16:16.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:16.943: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:16.943: EHWIC ESWGE I2C read error *Nov 21 0 paks/sec out 0 Kbits/sec in 0 Kbits/sec out 0 packets decrypted 0 packets encrypted 0 bytes before decrypt 0 bytes encrypted 0 bytes decrypted 0 bytes after encrypt 0 packets decompressed 0 packets compressed 0 bytes before decomp 0 bytes before comp 16:16:: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 117.023: EHWIC ESWGE I2C read error *Nov 21 16:16:17.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:17.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:17.867: EHWIC ESWGE I2C read error *Nov 21 16:16:17.947 0 bytes after decomp 0 bytes after comp 0 packets bypass decompr 0 packets bypass compres 0 bytes bypass decompres 0 bytes bypass compressi 0 packets not decompress 0 packets not compressed 0 bytes not decompressed 0 bytes not compressed 1.0:1 compression ratio 1.0:1 overall Last 5 minutes: 0 pac *Nov 21 16:16:17.947: EHWIC ESWGE I2C read error *Nov 21 16:16:18.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:18.627: EHWIC ESWGE I2C read error *Nov 21 16:16:18.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16kets in 0 packets out 0 paks/sec in 0 paks/sec out 0 bits/sec in :16:18.707: EHWIC ESWGE I2C read error 0 bits/sec out 0 bytes decrypted 0 bytes encrypted 0 Kbits *Nov 21 16:16:19.387: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1/sec decrypted 0 Kbits/sec encrypted 1.0:1 compression ratio 1.0:1 overall ------------------ show crypto engine accel ring packet *Nov 21 16:16:19.387: EHWIC ESWGE I2C read error *Nov 21 16:16:19.467: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:19.467: EHWIC ESWGE I2C read error *Nov 21 16:16:20.147: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1 ------------------ Device: Onboard VPN Location: Onboard: 0 No ring buffers exist for this device ------------------ show crypto engine accel ring pool ------------------ Device: Onboard VPN Location: Onboard: 0 No ring buffers exist for this device ------------------ show crypto engine accel ring control ------------------ Device: Onboard VPN Location: Onboard: 0 No ring buffers exist for this device ------------------ show license udi ------------------ Devic6:20.147: EHWIC ESWGE I2C read error *Nov 21 16:16:20.227: EHWIC ESWGE I2C read error *Nov 21 16:16:20.307: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:20.987: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:20.987: EHWIC ESWGE I2C read error *Nov 21 16:16:21.107: EHWIC ESWGE Ie# PID SN UDI ----------------------------------------------------------------------------- *1 CISCO2901/K9 FGL181525SE CISCO2901/K9:FGL181525SE ------------------ show license udi standby ------------------ ------------------ show license feature ------------------ Feature name Enforcement Evaluation Subscription Enabled RightToUse ipbasek9 no no no yes no securityk9 yes yes no yes yes uck9 yes yes no mmand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:21.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 yes yes datak9 yes yes no no yes NtwkEssSuitek9 *Nov 21 16:16:21.995: EHWIC ESWGE I2C read error yes yes no no 2C read error *Nov 21 16:16:21.315: %ESWGE_ERR-3-CMDQ_FULL: Coyes CollabProSuitek9 yes yes no no yes ios-ips-update yes yes yes no yes SNASw yes yes no no yes hseck9 yes no no no no cme-srst yes yes no yes yes mgmt-plug-and-play yes no no *Nov 21 16:16:22.075: %ESWGE_ERR-3-CMDQ_FULL: Command queue is WIC ESWGE I2C read error Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:22.075: EH no no mgmt-lifecycle yes no *Nov 21 16:16:22.755: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 no no no mgmt-assurance yes no no no no mgmt-onplus yes no no no no mgmt-compliance yes no no no no ------------------ show license feature standby ------------------ ------------------ show license file ------------------ Li *Nov 21 16:16:22.755: EHWIC ESWGE I2C read error *Nov 21 16:16:22.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:22.835: EHWIC ESWGE I2C read error *Nov 21 16:16:23.515: %ESWGE_ERR-3-CMDQ_FULL: Cocense Store: Primary License Storage Store Index: 0 License: 11 ipbasek9 1.0 LONG NORMAL STANDALONE EXCL INFINITE_KEYS INFINIT E_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *19AMZQ2VRY93SL9400 NiL NiL NiL 5_MINS CISCO2901/K9FGL181525SE W0Hhc1Bkbks48noyvLrCVSktVribT86KpYzQQYchWQLecMAuFhMcYKR z2IIxPGc1VCy8AkuUPqTn1y3DPFryyIL47WWtz0qqecm6nfpDWD6oL9QEt0nf3B21 G1i9phtC26LR$AQEBIf8B//+MRn9sVQybxN9immand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:23.515: EHWIC ESWGE I2C read error *Nov 21 16:16:23.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:23.595: EHWIC ESWGE I2C read error *Nov 21 16:16:24.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:24.275: M7FRcsAO4RNtumYdjFiXapE a/OvH5JBP6EXg5/XwLreG6ztWYstHebPkGlARtYd1UQO7GJ3KnufZ9oZ6JdFniDf5 HrQ8DrXdpCz5RgZE+y8fbN200xiXA5cB3fwcJqoPIFZm2HmD1qFfsyTAzuio66t6X k5y8xo1lbVhvoh/FZfy5iRY3oE= Comment: Hash: UISfAnz593pgQ1yX63iG6PfVSTM= Store Index: 1 License: 11 uck9 1.0 LONG NORMAL STANDALONE EXCL INFINITE_KEYS INFINITE_KE YS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *19AMZQ2VRY93SL9400 NiL NiL NiL 5_MINS CISEHWIC ESWGE I2C read error *Nov 21 16:16:24.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:24.355: EHWIC ESWGE I2C read error *Nov 21 16:16:24.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:25.215: %ESWGE_ERR-3CO2901/K9FGL181525SE< /UDI> r0CAcrnNXqn65RvaC5JBLAgRvZQIZ:qC7ZWW,myx:if3FEclyMsIcT3t45n iG1hQ3PO6ySXJMcSk4GbEbf5dQR3OrbCvQx,xBr4:MT08To7vfZlCtT1LQTyc-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1BZfK uCjA9G35$AQEBIf8B//9QKQyiqrhMKLcUY+qkLZntiNNuVfLMBoD4Sz9LSqD qyrx1upis56EAjN9pKD8TOXBHebPk *Nov 21 16:16:25.215: EHWIC ESWGE I2C read error GlARtYd1UQO7GJ3KnufZ9oZ6JdFniDf5HrQ8 DrXdpCz5RgZE+y8fbN200xiXA5cB3fwcJqoPIFZm2HmD1qFfsyTAzuio66t6Xk5y8 xo1lbVhvoh/FZfy5iRY3oE= Comment: Hash: N *Nov 21 16:16:25.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:25.423: EHWIC ESWGE I2C read error *Nov 21 16:16:25.503: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:26.183: %ESWGE_ERR-3-CMDQ_FULL: Command queue iEdbk7aUB5RQ5huqCz56tgu+3+o= Store Index: 2 License: 11 securityk9 1.0 LONG NORMAL STANDALONE EXCL INFINITE_KEYS INFIN ITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *19As Full, I2C cmd Read fail at in slot 1MZQ2VRY93SL94 00 NiL NiL NiL 5_MINS CISCO2901/K9FGL181525SE HwRgRAIu6 *Nov 21 16:16:26.183: EHWIC ESWGE I2C read error 7Sgt6vkEdVBf4Qy3Tcd9FhnjLeoHnchvnVT4Ex,Q7twF o2bc:,:oIo2LhLu0Yb6kgAj5Zd5kBUTJ0fqC0NgzqX,FP9Sd2nj41mz32dOLaCI5H 5xNcDou57roqLl$AQEBIf8B//+oDgaaqHXaewtCQuTo1Bv *Nov 21 16:16:26.263: EHWIC ESWGE I2C read error *Nov 21 16:16:26.943: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:26.943: EHWIC ESWGE I2C read error *Nov 21 16:16:27.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:27.023: EHWIC ESWGE I2C read error *Nov 21 16:16:27.703: %R+av4yIkKXRQHn Lfk2sAEZ7/jTHu8mB5sTugTUsJGQHNHebPkGlARtYd1UQO7GJ3KnufZ9oZ6JdFniD f5HrQ8DrXdpCz5RgZE+y8fbN200xiXA5cB3fwcJqoPIFZm2HmD1qFfsyTAzuio66t 6Xk5y8xo1lbVhvoh/FZfy5iRY3oE= Comment: Hash: M6+ON/rsqDeU5QYpxNHaKFyy9hI= License Store: Built-In License Storage Store Index: 0 License: 12 securityk9 1.0 LONG TRIAL DISABLED DISABLED DISABLED STANDALON E ADD INFINITE_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL NiL S ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:27.703: EHWIC ESWGE I2C read error *Nov 21 16:16:27.783: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:27.783: EHWIC ESWGE I2C read error *Nov 21 16:16:28.463: %ESWGE_ERR-3- LM_CODE DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKED< SN>NOTLOCKEDRTU o752vzSJKZrdH4u4ZtcK3Bw6ml3WxZh u1tBMjO3Ug6Lksw2do3TfGHKyFrX1R8iELHZXXc1gkMK:QJkHnk509:V92eExG7eO HJzc0j:KNx37fPfwHgOvy17IlfYznZRK:sLqftl5PrdD0Te8m805D8iy31$A QEBIf8B///Qi+RhPeDffX673lUKCuNMEDzt9tuuVAOnJSWOWt+YibyFo2qPGfJs9t V4fif4QI2RqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ8H21 MNUjVbhoN0gyIWsyiJaM8AQIkVCMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:28.463: EHWIC ESWGE I2C read error *Nov 21 16:16:28.543: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:28.543: EHWIC ESWGE I2C read error *Nov 21 16:16:28.743: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16BQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q3SF/ 5Ko8XCY= Comment: Hash: 2SdvlCANIKgA2eCVZ0Gf288w5iE= Store Index: 1 License: 12 uck9 1.0 LONG TRIAL DISABLED DISABLED DISABLED STANDALONE ADD INFINITE_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL NiL SLM_COD E DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKEDNOT LOCKEDRTU dFfKnRDXksm4rRhgQ3GC3FUPG:tQGHiPcMTHp kpGZpVGInY9oEh7jJyNRzFYGuUGf09ij:1%ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:30.323: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 16:29.423: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:29.423: EHWIC ESWGE I2C read error *Nov 21 16:16:29.503: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:29.503: EHWIC ESWGE I2C read error *Nov 21 16:16:29.583: z4CCou7aoVLyGtMKyLqEPmwOvFqlvP0da L7xBdpLG6aAZrO9VW8L4hzymma:Tfzhq6R4dagios1U2TvvGd9LC$AQEBIf8 B///7shQaLj1bjoeqpL2xv1+sbNekW4SYX8pAVrC+Qo8X52PiPBrSJxVOLzCVA5K+ gjGRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ8H21MNUjVb hoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q3SF/5Ko8XC Y= Comment: Hash: WeQKMUSioEWjMkctjS0boLWpNT4= Store IndexC read error : 2 License: 12 datak9 1.0 LONG TRIAL DISABLED DISABLED D *Nov 21 16:16:30.323: EHWIC ESWGE I2C read error *Nov 21 16:16:30.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:30.587: EHWIC ESWGE I2ISABLED STANDALONE AD D INFINITE_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL NiL SLM_C ODE DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKEDN OTLOCKEDRTU nRbEsTOOMHl:ZVeYWhLM3h9H07EgKZ3DaEy nEbPSxo351:UZl9AFe,LigmXV4HRsfr8WjQpcF3ERNZKED4gFeUVffxungWvFnxm1 KVSr6PUSLZteliWF0s3CtK0rqFEMGm3gg9c:iw16ZwGrqDNVLPmTVi$AQEBI f8B///rbW/aK5VZHZnU1Kp7HiDRqan+uFOVBHo5UvsbCOc8yu24gnlQ94mLbol/BZ *Nov 21 16:16:31.267: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:31.267: EHWIC ESWGE I2C read error *Nov 21 16:16:31.347: EHWIC ESWGE I2C read error *Nov 21 16:16:32.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:32.027: EHWIC ESWGE I2C read error *Nov 21 16:16:32.107: FAJcKRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ8H21MNUj VbhoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q3SF/5Ko8 XCY= Comment: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Hash: YYhDTITGzmA0GQrQAhU3aYslL7I= Store Index: 3 License: 12 NtwkEssSuitek9 1.0 LONG TRIAL DISABLED DISABLED DISABLED STAND ALONE ADD INFINITE_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL N iL SLM_CODE DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKED

NOTLOCKEDRTU Ti,g,tDbJ7aAnJVHBUM53eFe6eE 3DS,YSiQaE9IyGd3SxRtSnppbLdBAXSEkCVuFLHCrfir55m:G9RN0Oq6hbvL0URS8 cXIhK4f,41z7OlONLYVVOVT89JyUtgiu1cPK6:fh68hjaBy9vK76OYAI:3Nh3a$AQEBIf8B//9lLSEA4C1Fdrg7OKynOPxSxwPavKc1Ha6vQ6rEWyFFNvW7a6Sc8N 9tsxg2HXejCmaRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ 8H21MNUjVbhoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q 3SF/5Ko8XCY= Comment: t 1 *Nov 21 16:16:33.983: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:33.983: EHWIC ESWGE I2C read error *Nov 21 16:16:34.135: EHWIC ESWGE I2C read error *Nov 21 16:16:34.399: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 162C cmd Read fail at in slot 1:16:35.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I Hash: 3+VxGIv76TkVHGMCRskrGmK5XZ0= Store Index: 4 License: 12 CollabProSuitek9 1.0 LONG TRIAL DISABLED DISABLED DISABLED STA NDALONE ADD INFINITE_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL NiL SLM_CODE DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKED< /PID>NOTLOCKEDRTU xN4yaWL7hVFS578,sz1o3cp0t g8rHVqkwfW,Tb0qEL3FUvJfq05ilKdxDP:JBnQcVCHbtMshhGsyQQpuby9JgiLrc5 Eb:Z7iD5vVUstzqrWdfFxcbAoaOTHuycGoAG2I *Nov 21 16:16:35.079: EHWIC ESWGE I2C read error *Nov 21 16:16:35.159: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:35.159: EHWIC ESWGE I2C read error *Nov 21 16:16:35.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1WmL,L0Yn0OGmp3q4K1Ddan4yfa$ AQEBIf8B///EEjFxXObp2ZoE5Afu4FNz3mD9NVmqPGMu1Kiphtp82kCikxtr fALPVHCh2NEE5HCRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyE vQ8H21MNUjVbhoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc /q3SF/5Ko8XCY= Comment: Hash: BHmBQN9Vu7Qosp5NitbHPcFMPE4= Store Index: 5 License: 12 ios-ips-update 1.0 LONG TRIAL DISABLED DISABLED DISABLED STAND ALONE ADD INFINITE_KEYS INFINITE_KEYS 6:35.839: EHWIC ESWGE I2C read error *Nov 21 16:16:35.919: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:35.919: EHWIC ESWGE I2C read error *Nov 21 16:16:36.599: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:36.599: EHWIC ESWGE I2C read error *Nov 21 16:16:36.679: %ESWGE_ERR-3-CM1 JAN 2006 1 JAN 2035 NiL N iL SLM_CODE DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKED

NOTLOCKEDRTU tzDxtBd3ARcHcbsl:bTo3DRp7AI M:czMKZe5ixaNnZLScz0vElR92jlsCKNeA5B3LNx8fsnEmFa5E6QG,yxWbBVCv2CN LbA7LcgrNvgX2IOo3tfda:TpXJP8yqlxBv910j3DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 16DEg5L494kNHZSLiCwnkmVr$AQEBIf8B//9r/97v+LovAn5aedjof/46XFQVtVTfx0qKoiXr125bCwjL6QCJXN e7vPq2IrMxlYaRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ *Nov 21 16:16:36.679: EHWIC ESWGE I2C read error *Nov 21 16:16:37.479: EHWIC ESWGE I2C read error *Nov 21 16:16:37.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:37.683: EHWIC ESWGE I2C read error *Nov 21 16:16:37.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue i 8H21MNUjVbhoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q 3SF/5Ko8XCY= Comment: Hash: 7lCXQ1d2qI0/CrSzyvzp8kEPvvs= Store Index: 6 License: 12 SNASw 1.0 LONG TRIAL DISABLED DISABLED DISABLED STANDALONE ADD INFINITE_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL NiL SLM_CO DE DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKEDNO TLOCKEDRTU JysAmcKhWt2NX,2oSl3b3C2l1Ydf69T2sqD8 s Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:38.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:38.535: EHWIC ESWGE I2C read error *Nov 21 16:16:38.743: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:38.743: EHWIC ESWGE I2C read error *Nov 21 16:16:38.823: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:39.503: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 xkFFDcVJ3wi8k7xkaeh9kGnRZpfLfHljT5ZEdba6nj50M4ET,OVvYxfh0cPyQvCFH fftW4bILeaugEBnzifeoZPkC1v6tQ3MrGJge2nKXjwXiCj07wlbfO$AQEBIf 8B//9CaOsWnM8osCmi89ExWp3/nMOV1yVPvapelNln25KHNQigAuVMpVEeKnYHZcy ZXq2RqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ8H21MNUjV bhoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q3SF/5Ko8X CY= Comment: Hash: NLkxiKekd6aCZxjtGzAIQnQ8tOk= Store Index: 7 License: 12 *Nov 21 16:16:39.503: EHWIC ESWGE I2C read error *Nov 21 16:16:39.583: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 C read error6:39.583: EHWIC ESWGE I2 cme-srst 1.0 LONG TRIAL DISABLED DISABLED DISABLED STANDALONE ADD 5000_KEYS INFINITE_KEYS 1 JAN 2006 1 JAN 2035 NiL NiL SLM_COD E DEMO NiL NiL Ni NiL NiL 5_MINS NOTLOCKEDNOT LOCKEDRTU WpSgU6PRGwUuaGRHMbC3fD62LMBANgpqM4aJV 6BzgHVbJcpZ675EYeqjuZYZcv3Yf6iPSJj8CDgRlI2VnTtHEh3PDHp3AwbJhP4ntM IK6qxg3weqfHB2IH7tmQkUytslXrVtWGWVu1h0EFzpObhH5cY03K$AQEBIf8 B//9dUmqTnsssF4FqWlhJM/lLCaLk4osA *Nov 21 16:16:40.263: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:40.263: EHWIC ESWGE I2C read error *Nov 21 16:16:40.343: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:40.343: EHWIC ESWGE I2C read error *Nov 21 16:16:41.023: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C c9BAIom2D7SaDMjVts7DbZgMHM89/CwId yKmRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+MFzsqlhKoJVlPyEvQ8H21MNUjVb hoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJfEPQIx6tZ++/Vtc/q3SF/5Ko8XC Y= Comment: Hash: PbBgLws7MEc4zo2zU6IHYCLHwtk= ------------------ show license file standby ------------------ ------------------ show license detail ------------------ Index: 1 Feature: CollabProSuitek9 Version: 1.0 License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluamd Read fail at in slot 1 *Nov 21 16:16:41.023: EHWIC ESWGE I2C read error *Nov 21 16:16:41.103: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:41.103: EHWIC ESWGE I2C read error *Nov 21 16:16:41.783: %EStion total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 4 Store Name: Built-In License Storage Index: 2 Feature: NtwkEssSuitek9 Version: 1.0 License Type: EvalRightToUse License State: Active, Not in Use, EULA not accWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1epted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 3 Store Name: Built-In License Storage *Nov 21 16:16:41.783: EHWIC ESWGE I2C read error *Nov 21 16:16:41.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:41.863: EHWIC ESWGE I2C read error *Nov 21 16:16:42.175: %ESWGE_ERR-3-CMDQ_FULL: Co Index: 3 Feature: SNASw Version: 1.0 License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 6 Store Name: Built-Immand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:42.855: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1n License Storage Index: 4 Feature: cme-srst Version: 1.0 License Type: EvalRightToUse License State: Active, In Use Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 2 days Period used: 1 day 14 hours Transition date: Jan 19 2015 06 *Nov 21 16:16:42.855: EHWIC ESWGE I2C read error *Nov 21 16:16:42.935: EHWIC ESWGE I2C read error *Nov 21 16:16:43.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fa:46:25 License Count: 24/0 (In-use/Violation) License Priority: Low Store Index: 7 il at in slot 1ame: Built-In License Storage *Nov 21 16:16:43.751: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 Index: 5 Feature: datak9 Version: 1.0 License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks read error 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 2 Store Name: Built *Nov 21 16:16:43.751: EHWIC ESWGE I2C read error *Nov 21 16:16:43.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:43.831: EHWIC ESWGE I2C-In License Storage Index: 6 Feature: ios-ips-update Version: 1.0 License Type: EvalRightToUse License *Nov 21 16:16:44.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 5 Store Name: Built-In License Storage Index: 7 Feature: ipbasek9 Version: 1.0 License Type: Perman *Nov 21 16:16:44.511: EHWIC ESWGE I2C read error *Nov 21 16:16:44.699: EHWIC ESWGE I2C read error *Nov 21 16:16:45.379: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read faient License State: Active, In Use License Count: Non-Counted License Priority: Medium Store Index: 0 Store Name: Primal at in slot 1ry License Storage Index: 8 Feature: securityk9 Version: 1.0 License Type: Permanent License State: *Nov 21 16:16:45.379: EHWIC ESWGE I2C read error Active, In Use License Count: Non-Counted License Priority: Medium Store Index: 2 Store Name: Primary License Storage Index: 9 Feature: securityk9 Version: 1.0 License Type: EvalRightToUse License State: Inactive *Nov 21 16:16:45.459: EHWIC ESWGE I2C read error *Nov 21 16:16:46.139: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:46.139: EHWIC ESWGE I2C read error *Nov 21 16:16:46.219: EHWIC ESWGE I2C read error *Nov 21 16:16:46.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue i Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 0 Store Name: Built-In License Storage Index: 10 s Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:47.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1Feature: uck9 Version: 1.0 License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Store Index: 1 Store Name: Primary License Storage Index: 11 Feature: uck9 Version: 1.0 License Type: EvalRightTo *Nov 21 16:16:47.027: EHWIC ESWGE I2C read error *Nov 21 16:16:47.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:47.107: EHWIC ESWGE I2C read error *Nov 21 16:16:47.187: %ESWGE_ERR-3-CMDQ_FULL: CoUse License State: Inactive Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None Store Index: 1 Store Name: Bucmd Read fail at in slot 1ilt-In License Storage ------------------ show license detail standby ------------------ % Error: No license for standby found - License feature not found ------------------ show license status ------------------ License Type Supported pmmand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:47.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C ermanent Non-expiring node locked license extension Expiring node locked license evaluation Expiring non node locked license evalRightToUse Right to use evaluation non node locked license rightToUse *Nov 21 16:16:47.867: EHWIC ESWGE I2C read error Right to use non node locked license paid subscription Expiring node locked subscription license with valid end date extension subscription Expiring node locked subscription license evaluation subscript *Nov 21 16:16:47.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:47.947: EHWIC ESWGE I2C read error *Nov 21 16:16:48.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1ion Expiring node locked subscription license License Operation Supported install Install license clear Clear license annotate Comment license save Save license revoke Revoke license call-home License call-home Cal *Nov 21 16:16:48.627: EHWIC ESWGE I2C read error l-home Operation Supported show pak Display license pak via call-home install Install license via call-home revoke Revoke license via call-home resend Fetch license via call-home Device status Device Credential type: DEVICE Device Credential Verification: PASS Rehost Type: HARDWARE SWIFT url status Swift URL set to default value : https://to *Nov 21 16:16:48.835: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:48.835: EHWIC ESWGE I2C read error *Nov 21 16:16:49.515: %ESWGE_ERR-3-CMols.cisco.com/SWIFT/Licensing ------------------ show license status standby ------------------ ------------------ DQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1show license statistics ------------------ Administrative statistics Install success count: 0 Install failure count *Nov 21 16:16:49.515: EHWIC ESWGE I2C read error : 0 Install duplicate count: 0 Comment add count: 0 Comment delete count: 0 Clear count: 0 Save count: 0 Save cred count: 0 Client statistics Request success coun *Nov 21 16:16:49.595: EHWIC ESWGE I2C read error *Nov 21 16:16:50.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:50.275: EHWIC ESWGE I2C read error *Nov 21 16:16:50.355: %ESWGE_ERR-3-CMDQ_FULL: Commt: 13 Request failure count: 0 Release count: 2 Global Notify count: 0 ------------------ show license statistics standby ------------------ ------------------ show buffers ------------------ Buffer elements: 1361 in free list 52274 hits, 0 misses, 1242 created Public buffer pools: Small buffers, 104 bytes (total 119, permanent 50, peak 119 @ 00:18:32): 101 in free list (20 min, 150 max allowed) 10402 hits, 23 misses, 0 and queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:50.355: EHWIC ESWGE I2C read error *Nov 21 16:16:50.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:51.323: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:51.323: EHWIC ESWGE I2C read error *Nov 21 16:16:51.403: EHtrims, 69 created 0 failures (0 no memory) Middle buffersWIC ESWGE I2C read error , 600 bytes (total 85, permanent 25, peak 85 @ 00:18:32): 37 in free list (10 min, 150 max allowed) 8980 hits, 20 misses, 0 trims, 60 created 0 failures (0 no memory) Big buffers, 1536 bytes (total 51, permanent 50, peak 51 @ 00:18:55): 51 in free list (5 min, 150 max allowed) 7088 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) VeryBig buffers, 4520 bytes (total 11, permanent 10, peak 11 @ 00: *Nov 21 16:16:51.535: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:52.215: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:52.215: EHWIC ESWGE I2C read error *Nov 21 16:16:52.295: %ESWGE_ERR-3-CMDQ_FULL: Command queue is18:55): 11 in free list (0 min, 100 max allowed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) Large buffers, 5024 bytes (total 1, permanent 0, peak 1 @ 00:19:28): 1 in free list (0 min, 10 max allowed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) Huge buffers, 18024 bytes (total 5, permanent 0, peak 5 @ 00:18:55): 5 in free list (4 min, 10 max allowed) 0 hits, 0 misses, 0 trims, 5 created 0 failures (0 no memory) I Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:52.295: EHWIC ESWGE I2C read error *Nov 21 16:16:52.975: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:52.975: EHWIC ESWGE I2C read error *Nov 21 16:16:53.055: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:53.055: EHWIC ESWGE I2C nterface buffer pools: CF Small buffers, 104 bytes (total 101, permanent 100, peak 101 @ 00:19:21): 101 in free list (100 min, 200 max allowed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) Onboard DSPRM Pool buffers, 264 bytes (total 300, permanent 300): 0 in free list (0 min, 300 max allowed) 300 hits, 0 fallbacks 300 max cacheread error size, 300 in cache 1067 hits in cache, 0 misses in cache Generic ED Pool buffers, 512 bytes (total 101, permanent 100, *Nov 21 16:16:53.735: EHWIC ESWGE I2C read error *Nov 21 16:16:53.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:53.971: EHWIC ESWGE I2C read error *Nov 21 16:16:54.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:54.851: EHWIC ESWGE I2C read error *Nov 21 16:16:55.175: % peak 101 @ 00:18:48): 101 in free list (100 min, 100 max allowed) 0 hits, 0 misses CF Middle buffers, 600 bytes (total 101, permanent 100, peak 101 @ 00:19:21): 101 in free list (100 min, 200 max allowed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) Syslog ED Pool buffers, 600 bytes (total 133, permanent 132, peak 133 @ 00:18:48): 101 in free list (132 min, 132 max allowed) 4804 hits, 0 misses CF Big buffers, 1536 bytes (total 26, permanent 25,ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:55.175: EHWIC ESWGE I2C read error *Nov 21 16:16:55.255: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:56.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:56.179: EHWIC ESWGE I2C read error peak 26 @ 00:19:21): 26 in free list (25 min, 50 max allo *Nov 21 16:16:56.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1wed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) IPC buffers, 4096 bytes (total 2, permanent 2): 1 in free list (1 min, 8 max allowed) 1 hits, 0 fallbacks, 0 trims, 0 created 0 failures (0 no memory) CF VeryBig buffers, 4520 bytes (total 3, permanent 2, peak 3 @ 00:19:21): 3 in free list (2 min, 4 max allowed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) CF L *Nov 21 16:16:56.259: EHWIC ESWGE I2C read error *Nov 21 16:16:56.415: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:16:57.219: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1arge buffers, 5024 bytes (total 2, permanent 1, peak 2 @ 00:19:21): 2 in free list (1 min, 2 max allowed) 0 hits, 0 misses, 0 trims, 1 created 0 failures (0 no memory) IPC Medium buffers, 16384 bytes (total 2, permanent 2): 2 in free list (1 min, 8 max allowed) 0 hits, 0 fallbacks, 0 trims, 0 created 0 failures (0 no memory) IPC Large buffers, 65535 bytes (total 17, permanent 16, peak 17 @ 00:19:23): 17 in free list (16 min, 16 max allowed) 0 hits, 0 misses *Nov 21 16:16:57.219: EHWIC ESWGE I2C read error *Nov 21 16:16:57.299: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:57.299: EHWIC ESWGE I2C read error *Nov 21 16:16:58.083: EHWIC ESWGE I2C read error *Nov 21 16:16:58.287: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:58.287: E, 19 trims, 20 created 0 failures (0 no memory) Header pools: Header buffers, 0 bytes (total 768, permanent 768): 256 in free list (128 min, 1024 max allowed) 512 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) 512 max cache size, 512 in cache 769 hits in cache, 0 misses in cache Particle Clones: 1024 clones, 0 hits, 0 misses Public particle pools: F/S buffers, 1664 bytes (total 768, permanent 768): 256 in free list (128 min, 1024 max aHWIC ESWGE I2C read error *Nov 21 16:16:59.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:16:59.051: EHWIC ESWGE I2C read error *Nov 21 16:16:59.131: EHWIC ESWGE I2C read error *Nov 21 16:16:59.403: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fllowed) 512 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) 512 max cache size, 512 in cache 0 hits in cache, 0 misses in cache Normal buffers, 1676 bytes (total 3840, permanent 3840): 3840 in free list (128 min, 4096 max allowed) 0 hits, 0 misses, 0 trims, 0 created ail at in slot 1 *Nov 21 16:17:00.375: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 0 failures (0 no memory) Private particle pools: HQF Particle buffers, 0 bytes (total 2000, permanent 2000): 2000 in free list (500 min, 2000 max allowed) 0 hits, 0 misses, *Nov 21 16:17:00.375: EHWIC ESWGE I2C read error *Nov 21 16:17:00.455: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:00.455: EHWIC ESWGE I2C read error *Nov 21 16:17:00.615: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16 0 trims, 0 created 0 failures (0 no memory) IDS SM buffers, 240 bytes (total 128, permanent 128): 0 in free list (0 min, 128 max allowed) 128 hits, 0 fallbacks 128 max cache size, 128 in cache 0 hits in cache, 0 misses in ca:17:01.407: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1che PSE2-1/0 buffers, 1536 bytes (total 768, permanent 768): 0 in free list (0 min, 768 max allowed) 768 hits, 0 fallbacks 768 max cache size, 512 in cache 772 hits in cache, 0 misses in cache GigabitEthernet0/0 buffers, 1664 byt *Nov 21 16:17:01.407: EHWIC ESWGE I2C read error *Nov 21 16:17:01.487: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:01.487: EHWIC ESWGE I2C read error *Nov 21 16:17:02.167: EHWIC ESWGE I2C read error *Nov 21 16:17:02.347: EHWIC ESWGE I2C read error *Nov 21 es (total 1024, permanent 1024): 0 in free list (0 min, 1024 max allowed) 1024 hits, 0 fallbacks 1024 max cache size, 768 in cache 256 hits in cache, 0 misses in cache GigabitEthernet0/1 buffers, 1664 bytes (total 1024, permanent 1024): 0 in free list (0 min, 1024 max allowed) 1024 hits, 0 fallbacks 1024 max cache size, 768 in cache 256 hits in cache, 0 misses in cache ------------------ show buffers usage ------------------ Statistics for the Sm16:17:03.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:03.027: EHWIC ESWGE I2C read error *Nov 21 16:17:03.227: EHWIC ESWGE I2C read error *Nov 21 16:17:03.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:04.143all pool Caller pc : 0x318A4FB8 count: 3 Resource User: Init count: 4 Output IDB : Gi0/1/6 count: 2 Caller pc : 0x331F31F8 count: 13 Resource User: Spanning T count: 13 Output IDB : Gi0/1/1 count: 2 Caller pc : 0x332D2B70 count: 1 Output IDB : Gi0/1/2 count: 2 Output IDB : Gi0/1/5 count: 2 Output IDB : Gi0/1/0 count: 2 Output IDB : IS0/1 count: 1 Output IDB : Gi0/1/4 co: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:04.143: EHWIC ESWGE I2C read error *Nov 21 16:17:04.235: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:04.235: Et 1HWIC ESWGE I2C read error *Nov 21 16:17:04.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slount: 2 Number of Buffers used by packets generated by system: 119 Number of Buffers used by incoming packets: 0 Statistics for the Middle pool Caller pc : 0x31AD1980 count: 21 Resource User: ILPM count: 1 Resource User: Logger count: 46 Caller pc : 0x31AD0598 count: 26 Number of Buffers used by packets generated by system: 85 Number of Buffers used by incoming packets: 0 Statistics for the Big pool Number of Buffe *Nov 21 16:17:04.915: EHWIC ESWGE I2C read error *Nov 21 16:17:04.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:04.995: EHWIC ESWGE I2C read error *Nov 21 16:17:05.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:05.831: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C rs used by packets generated by system: 51 Number of Buffers used by incoming packets: 0 Statistics for the VeryBig pool Number of Buffers used by packets generated by system: 11 Number of Buffers used by incoming packets: cmd Read fail at in slot 1 0 Statistics for the Large pool Number of Buffers used by packets generated by system: 1 Number of Buffers used by incoming packets: 0 Statistics for the Huge pool Number of Buffers used by packets generated by system: 5 *Nov 21 16:17:05.831: EHWIC ESWGE I2C read error *Nov 21 16:17:05.911: EHWIC ESWGE I2C read error *Nov 21 16:17:06.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:06.591: EHWIC ESWGE I2C read error *Nov 21 16:17:06.671: %ESWGE_ERR-3-CMDQ_FULL: Command queue i Number of Buffers used by incoming packets: 0 Statistics for the CF Small pool Number of Buffers used by packets generated by system: 101 Number of Buffers used by incoming packets: 0 Statistics for the Onboard DSPRM Pos Full, I2C cmd Read fail at in slot 1ol pool Number of Buffers used by packets generated by system: 300 Number of Buffers used by incoming packets: 0 Statistics for the Generic ED Pool pool Number of Buffers used by packets generated by system: 101 Number of Buffers u *Nov 21 16:17:06.671: EHWIC ESWGE I2C read error *Nov 21 16:17:07.351: EHWIC ESWGE I2C read error *Nov 21 16:17:07.511: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:07.511: EHWIC ESWGE I2C read error *Nov 21 16:17:07.591: %ESWGE_ERR-3-CMDQ_FULL: Command queue ised by incoming packets: 0 Statistics for the CF Middle pool Number of Buffers used by packets generated by system: 101 Number of Buffers used by incoming packets: 0 Statistics for the Syslog ED Pool pool Caller pc : 0x31F32EE0 count: 32 Resource User: EEM ED Sys count: 32 Number of Buffers used by packets generated by system: 133 Number of Buffers used by incoming packets: 0 Statistics for the CF Big pool Number of Buffers used by s Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:08.271: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:08.271: EHWIC ESWGE I2C read error *Nov 21 16:17:08.351: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:08.351: EH-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1WIC ESWGE I2C read error *Nov 21 16:17:09.031: %ESWGE_ERR-3packets generated by system: 26 Number of Buffers used by incoming packets: 0 Statistics for the IPC pool Caller pc : 0x304E76FC count: 1 Resource User: Init count: 1 Number of Buffers used by packets generated by system: 2 Number of Buffers used by incoming packets: 0 Statistics for the CF VeryBig pool Number of Buffers used by packets generated by system: 3 Number of Buffers used by incoming packets: 0 Statistics for *Nov 21 16:17:09.031: EHWIC ESWGE I2C read error *Nov 21 16:17:09.111: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:09.111: EHWIC ESWGE I2C read error *Nov 21 16:17:09.315: %ESWGE_ERR-3-CMDQ_FULL: Co the CF Large pool Number of Buffers used by packets generated by system: 2 Number of Buffers used by incoming packets: 0 Statistics for the IPC Medium pool Number of Buffers used by packets generated by system: 2 Number of Buffers used by incoming packets: 0 Statistics for the IPC Large pool Number of Buffers used by packets generated by system: 17 Number of Buffers used by incoming packets: 0 Statistics for the Header pool Number of Buffermmand queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:EHWIC ESWGE I2C read error 17:09.995: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:09.995: EHWIC ESWGE I2C read error *Nov 21 16:17:10.123: EHWIC ESWGE I2C read error *Nov 21 16:17:10.803: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:10.803: s used by packets generated by system: 768 Number of Buffers used by incoming packets: 0 Statistics for the FS Header pool Caller pc : 0x3035011C count: 3 Resource User: Init count: 19 Caller pc : 0x34E74108 count: 1 Caller pc : 0x30295C3C count: 1 Calle *Nov 21 16:17:10.883: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1r pc : 0x300AFA1C count: 1 Caller pc : 0x300AFA5C count: 1 Caller pc : 0x3043092C count: 1 Caller pc : 0x31E9A0FC count: 1 Caller pc : 0x31E9A15 *Nov 21 16:17:10.883: EHWIC ESWGE I2C read error *Nov 21 16:17:11.563: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:11.563: EHWIC ESWGE I2C read error *Nov 21 16:17:11.643: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 164 count: 1 Caller pc : 0x31E9A180 count: 1 Caller pc : 0x31E9A1D8 count: 1 Caller pc : 0x31E9A204 count: 1 Caller pc : 0x3209AB38 count: 1 Caller pc : 0x30DD3364 count: 1 Caller pc : 0x300B00E4:17:11.643: EHWIC ESWGE I2C read error count: 1 Caller pc : 0x31E9A128 count: 1 Caller pc : 0x31E9A1AC count: 1 Caller pc : 0x31E9A230 count: 1 Number of Buffers used by packets generated by system: 35 Number of Buffers used by incoming packets: *Nov 21 16:17:11.723: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:12.603: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:12.603: EHWIC ESWGE I2C read error *Nov 21 16:17:12.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is F 0 Statistics for the SW Crypto Header pool Caller pc : 0x33A80C9C count: 1 Resource User: Iniull, I2C cmd Read fail at in slot 1t count: 1 Number of Buffers used by packets generated by system: 2 Number of Buffers used by incoming packets: *Nov 21 16:17:12.683: EHWIC ESWGE I2C read error 0 Statistics for the Crypto Fragmentation Header pool Caller pc : 0x30101A14 count: 1 Resource User: Init count: 1 Number of Buffers used by packets generated by system: 2 Number of Buffers used by incoming packe *Nov 21 16:17:13.363: EHWIC ESWGE I2C read error *Nov 21 16:17:13.587: EHWIC ESWGE I2C read error *Nov 21 16:17:13.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:14.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 1ts: 0 ------------------ show inventory ------------------ NAME: "CISCO2901/K9", DESCR: "CISCO2901/K9 chassis, Hw Serial#: FGL181525SE, Hw Revision: 1.0" PID: CISCO2901/K9 , VID: V06 , SN: FGL181525SE NAME: "8 Port GE POE EHWIC Switch on Slot 0 SubSlot 1", DESCR: "8 Port GE POE EHWIC Switch" PID: EHWIC-D-8ESG-P , VID: V01 , SN: FOC18075TMC NAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "2nd generation four port FXO voice i6:17:14.347: EHWIC ESWGE I2C read error *Nov 21 16:17:14.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:14.427: EHWIC ESWGE I2C read error *Nov 21 16:17:15.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:15.107: EHWIC ESWGE I2C read error nterface daughtercard" PID: VIC2-4FXO , VID: V04 , SN: FOC18122S2U NAME: "3rd generation four port FXS DID voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "3rd generation four port FXS DID voice interface daughtercard" PID: VIC3-4FXS/DID , VID: V03 , SN: FOC18129GZ6 NAME: "PVDM3 DSP DIMM with 32 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 32 Channels" PID: PVDM3-32 , VID: V01 , SN: FOC1813422C NAME: "Internal Services Module with Services Ready Engi *Nov 21 16:17:15.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:15.187: EHWIC ESWGE I2C read error *Nov 21 16:17:15.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:15.867: EHWIC ESWGE I2C read error *Nov 21 16:17:15.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmne on Slot 0", DESCR: "Internal Services Module with Services Ready Engine" PID: ISM-SRE-300-K9 , VID: V02 , SN: FOC18092ZJB NAME: "C2901 AC-POE Power Supply", DESCR: "C2901 AC-POE Power Supply" PID: PWR-2901-POE , VID: , SN: ------------------ show region ------------------ Region Manager: Start End Size(b) Class Media Name 0x0C800000 0x0FFFFFFF 58720256 Iomem R/W iomem 0x20000000 0x20FFFFFF 16777216 IText R/O rommon_texd Read fail at in slot 1 *Nov 21 16:17:15.947: EHWIC ESWGE I2C read error *Nov 21 16:17:16.083: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:16.763: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:16.763: EHWIC ESWGE I2Ct 0x21000000 0x2C7FFFFF 192937984 Local R/W Main_memory_1 0x30000000 0x3FFFFFFF 268435456 Local R/W main 0x300091E8 0x36B1EF93 112287148 IText R/O main:text 0x3 read error 6B28880 0x3BA398DF 82907232 IData R/W main:data 0x396378EC 0x3AA3E87F 21000084 Local R/W data:heap 0x3BA398 *Nov 21 16:17:16.843: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1E0 0x3C78445F 13937536 IBss R/W main:bss 0x3C784460 0x3FFFFFFF 59227040 Local R/W main:heap 0x80000000 0x8C7FFFFF 209715200 Local R/W main_k0 0xA0000000 0xA *Nov 21 16:17:16.843: EHWIC ESWGE I2C read error *Nov 21 16:17:17.579: EHWIC ESWGE I2C read error *Nov 21 16:17:17.659: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:17.659: EHWIC ESWGE I2C read error *Nov 21 16:17:17.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue iC7FFFFF 209715200 Local R/W main_k1 Free Region Manager: Start End Size(b) Class Media Name ------------------ Mempool statistics ------------------ Head Total(b) Used(b) Free(b) Lowest(b) Largest(b) Processor 3C784460 273165108 94070608 179094500 57969488 145734676 I/O C800000 58720256 18153668 40566588 40517152 40515580 -------------- Top 100 allocator pc summary ----------- s Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:18.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:18.419: EHWIC ESWGE I2C read error *Nov 21 16:17:18.579: EHWIC ESWGE I2C read error *Nov 21 16:17:19.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:19.259: EHWIC ESWGE I2C read error *Nov 21 16:17:19.339: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:19 Allocator PC Summary for: Processor Displayed first 2048 Allocator PCs only PC Total Count Name 0x36054344 4915252 1 VOICE HA DB elems pool 0x30DA57A4 4586116 483 Interrupt Stack 0x336ABB88 3596692 49 XOS_MEM_BASE 0x3062F724 2183524 1744 *Packet Header* 0x33152B94 1794440 51 Init 0x3533C724 1768448 256 CCSIP_SPI_CONTROL 0x32E61098 1574112 24 regex 0x3050505C 1528324 12325 Init 0x3062F780 1514128 486 *.339: EHWIC ESWGE I2C read error *Nov 21 16:17:20.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:20.019: EHWIC ESWGE I2C read error *Nov 21 16:17:20.099: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:20.099: EHWIC ESWGE I2C read error *Nov 21 16:17:20.267: %ESWGE_ERR-3-CMDQ_Packet Data* 0x31A05CBC 1290352 14 event_trace_tbs 0x3000DDF8 1232488 130 TW Buckets 0x31A23B10 1114424 136 Init 0x33349048 952716 23 pak subblock chunk 0x3589B05C 851812 1 Init 0x35695FEC 836956 2 CCSIP CCB Pool Chunk 0x3321C054 805924 277 TCL Chunks 0x358C5D44 786344 2 Init 0x31FD9500 719264 7187 Init 0x314B4450 684000 9000 *Init* 0x3346A678 640156 2 event 0x31FD9520 579688 6713 IniFULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:20.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:20.947: EHWIC ESWGE I2C read error *Nov 21 16:17:21.027: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:21.027: EHWIC ESWGE I2C read error *Nov 21 16:17:t 0x31FD9514 554960 7187 Init 0x35B9BB78 502836 1 RTPSPI 0x300160B0 477184 176 Normal 0x36282A34 462336 14 Firewall State 0x314B4440 443688 12 Redundancy Even 0x350A2798 403120 2 SWMTPMSP SESSION chunk 0x3332D0E8 402116 481 Process 0x333240FC 387876 82 List Headers 0x32C8A5AC 384156 2 ccecp 0x32C901D0 384156 2 ppcp 0x32CC4EB4 384156 2 ppm 0x368A8470 382868 236 Init 0x365570A21.707: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:21.707: EHWIC ESWGE I2C read error *Nov 21 16:17:21.787: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:21.787: EHWIC ESWGE I2C read error *Nov 21 16:17:21.911: %ESWGE0 376988 2 gdoi_exit 0x30EEE3BC 352412 2 rg_infra 0x305DD0EC 335904 8 Init 0x350C74A4 329284 10 VTSP EVENT pool 0x30491DC8 327940 5 IPC Message Hea 0x3303E3BC 313428 4119 State Machine Instance 0x30CF3BC4 311200 4094 Init 0x35C93320 307928 23 Voip HA Session App 0x32E6A4FC 307576 1272 *Init* 0x3501F7B8 304052 1 Init 0x30016024 288644 21 Normal 0x353910A8 278580 1 CCSIP_TCP_SOCK_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:22.759: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:22.759: EHWIC ESWGE I2C read error *Nov 21 16:17:22.839: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:22.839: EHWIC ESWGE I2C read error *ET 0x3016DBB0 278580 1 CCSIP_TLS_SOCKET 0x31ADC388 262196 1 Init 0x36AFF574 261020 10 BITLIST CHUNK 0x34C48298 254852 1 Init 0x33361220 251300 25 RMI RO-RU Chunk 0x332E4BBC 232156 2 tunneNov 21 16:17:23.519: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1l 0x33328470 226156 46 Watched Queue 0x319C6A74 205460 1 Init 0x30475504 196764 3 Init 0x32491618 192104 2 Simple Trace 0x36B07138 167004 485 *Init* 0x34F4B224 160220 2 DSPRM msg chunk *Nov 21 16:17:23.519: EHWIC ESWGE I2C read error *Nov 21 16:17:23.687: EHWIC ESWGE I2C read error *Nov 21 16:17:24.367: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:24.367: EHWIC ESWGE I2C read error 0x3321BFE4 155924 30 TclCreateExecEnv 0x364A9864 152156 2 tp_ss_events 0x36529094 152156 2 ipsec_event 0x365290C8 152156 2 ipsec_error 0x365290FC 152156 2 ipsec_exception 0x33A0D6B8 149524 1947 Init 0x3034BA08 149484 3 Init 0x30475454 147000 70 Init 0x30E124A4 140156 2 nvram 0x314D8528 140156 2 checkpoint 0x314FBE70 140156 2 redundancy 0x363E80B0 140156 2 cfd 0x364C8F4 *Nov 21 16:17:24.535: EHWIC ESWGE I2C read error *Nov 21 16:17:24.739: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:25.419: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:25.419: EHWIC ESWGE I2C read error *Nov 21 16:17:25.499: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1C 140156 2 ezvpn 0x36926AA0 137312 56 CCVPM_HTSP 0x31DDD2C4 135360 4 OCE reinject ha 0x31A19908 133520 1576 Parser Linkage 0x306CC5C0 131176 2 Control-plane f 0x3037ADDC 131176 2 USB Startup 0x35E92BC4 131124 1 Init 0x35B5B388 129076 1 QOS_MODULE_MAIN 0x36161990 128156 2 flexvpn 0x31EBB278 128016 28 EEM Server 0x31EBB1E4 128016 28 EEM Server 0x31EBB1F4 128016 28 EEM Server *Nov 21 16:17:25.499: EHWIC ESWGE I2C read error *Nov 21 16:17:26.179: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:26.179: EHWIC ESWGE I2C read error *Nov 21 16:17:26.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1 0x35E2BEDC 122932 1 VOIP_FMD_MAIN 0x33324684 120624 12 List Elements 0x304E1584 120088 189 IPC Thread Slot 0x33329B40 117108 487 Process Events 0x32A5D764 112156 2 nhrp_error 0x319EC64C 103752 22 TTY data 0x35959670 100052 1 ivr: CallSetup 0x36144FF8 100052 1 Init 0x31FCE9D8 99772 956 Init 0x31FC77C8 97776 679 Init 0x32E6A1A8 96444 47 Reg Function 12 0x36AF7060 94048 12 D7:26.259: EHWIC ESWGE I2C read error *Nov 21 16:17:26.383: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:27.063: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:27.063: EHWIC ESWGE I2C read error *Nov 21 16:17:27.143: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read failHCPD Internal 0x34E70074 90932 1 dsp channel 0x33360758 90468 9 RMI RU Chunks 0x331CA76C 88520 1123 Init 0x32014E14 88156 2 fnf_mon 0x31D87714 at in slot 1 88156 2 cef_interface 0x31E32DCC 88156 2 adjacency 0x319C6A3C 88020 27 *Hardware IDB* *Nov 21 16:17:27.143: EHWIC ESWGE I2C read error Allocator PC Summary for: I/O PC Total Count Name 0x300160D4 8672000 140 Normal 0x30016024 6926976 5 IDS SM 0x30336218 786560 1 Gather Lis *Nov 21 16:17:27.823: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:27.823: EHWIC ESWGE I2C read error *Nov 21 16:17:27.903: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:27.903: EHWIC ESWGE I2C read error *Nov 21 16:t Buffer Pool 0x30336520 524416 1 WQE Buffer Pool 0x3033656C 524416 1 CF DMA pool 0x3062F780 524416 574 *Packet Data* 0x3033639C 65664 1 Command Buffer Pool 0x305DD1C4 33792 8 HDLC32_TX 0x305DD228 33792 8 HDLC32_RX 0x30330F48 24960 3 *Init* 0x33303370 14848 1 *Init* 0x3094CF24 4224 1 ESWGE Mac Table 0x30296228 4224 1 PSE2-1/0 0x3029D9D0 4224 1 Init 0x30DFB604 417:28.599: EHWIC ESWGE I2C read error *Nov 21 16:17:28.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:28.863: EHWIC ESWGE I2C read error *Nov 21 16:17:28.943: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:29.655: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail 096 32 USB Startup 0x3094CF68 1280 1 ESWGE Sat in slot 1tats table 1 0x3094CF8C 1280 1 ESWGE Stats table 2 0x30330F80 384 3 *Init* 0x30330F9C 384 3 *Init* 0x3094CFB0 256 1 ESWGE Host Msg Q 0x302942CC 256 1 PSE2 GE Stats 0x30414924 128 1 Init ------------------ show dmvpn detail ------------------ Legend: Attrb --> S - Static, D - Dynamic, I - Incomplete N - NATed, L - Local, X - No Socket # Ent --> *Nov 21 16:17:29.655: EHWIC ESWGE I2C read error *Nov 21 16:17:29.751: EHWIC ESWGE I2C read error *Nov 21 16:17:31.551: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:31.551: EHWIC ESWGE I2C read error *Nov 21 16:17:31.631: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:31.631: Number of NHRP entries with same NBMA peer NHS Status: E --> Expecting Replies, R --> Responding, W --> Waiting UpDn Time --> Up or Down Time for a Tunnel ========================================================================== Interface: Tunnel1, IPv4 NHRP Details IPv4 NHS: 10.11.0.1 E priority = 0 cluster = 0 Type:Spoke, Total NBMA Peers (v4/v6): 1 # Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb Target Network ----- --------------- --------------- ----- -------- ----- EHWIC ESWGE I2C read error *Nov 21 16:17:31.711: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:32.391: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:32.391: EHWIC ESWGE I2C read error *Nov 21 16:17:32.471: %ESWGE_ERR-3------------------ 1 192.168.241.36 10.11.0.1 INTF never S 10.11.0.1/32 Crypto Session Details: -------------------------------------------------------------------------------- ------------------ show crypto ipsec client ezvpn ------------------ Easy VPN Remote Phase: 8 ------------------ show ip nat statistics ------------------ ----CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1-------------- show ip nat translations ------------------ ------------------ show crypto map ------------------ *Nov 21 16:17:32.471: EHWIC ESWGE I2C read error *Nov 21 16:17:33.151: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:33.151: EHWIC ESWGE I2C read error *Nov 21 16:17:33.231: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:33.231: EHWIC ESWGE I2C read error *Nov 21 16:17:33.311: %ESInterfaces using crypto map NiStTeSt1: Crypto Map IPv4 "Tunnel1-head-0" 65536 ipsec-isakmp Profile name: DMVPNPROFILE Security association lifetime: 4608000 kilobytes/3600 seconds Responder-Only (Y/N): N PFS (Y/N): N Mixed-mode : Disabled Transform sets={ DIB: { esp-3des esp-sha-hmac } , } Crypto Map IPv4 "Tunnel1-head-0" 65537 ipsec-isakmp Map is a PROFILE INSTANCE. Peer = 192.168.241.36 Extended IP access list access-list permit gre host 192.168.245.158 host 192.1WGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:33.991: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:33.991: EHWIC ESWGE I2C read error *Nov 21 16:17:34.071: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:34.071: EHWIC ESWGE I2C read error 68.241.36 Current peer: 192.168.241.36 Security association *Nov 21 16:17:34.863: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1lifetime: 4608000 kilobytes/3600 seconds Responder-Only (Y/N): N PFS (Y/N): N Mixed-mode : Disabled Transform sets={ DIB: { esp-3des esp-sha-hmac } , } Always create SAs Interfaces using crypto map Tunnel1-head-0: Tunnel1 ------------------ show access-list ------------------ Standard IP access list 1 10 permit 172.16.3.145 log 20 permit 172.16.238.2 log 30 permit 172.16.238.3 log 40 perm *Nov 21 16:17:34.863: EHWIC ESWGE I2C read error *Nov 21 16:17:34.943: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:34.943: EHWIC ESWGE I2C read error *Nov 21 16:17:35.623: %ESWGE_ERR-3-CMDQ_FULL: Comit 172.16.238.1 log 50 permit 172.16.3.48 log 60 permit 192.168.241.60 log 70 permit 172.16.3.20 log 80 permit 172.17.26.22 90 permit 172.16.26.20 log 100 permit 172.17.26.21 110 permit 172.17.26.20 120 permit 172.17.26.19 130 permit 172.16.3.5 log 140 permit 192.168.241.36 log 150 permit 172.16.3.84 160 permit 172.16.3.81 log 170 permit 192.168.242.100 log ------------------ show crypto isakmp policy ------------------ Global IKE pmand queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:35.623: EHWIC ESWGE I2C read error *Nov 21 16:17:35.703: EHWIC ESWGE I2C read error *Nov 21 16:17:35.915: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:36.595: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:36.595: olicy Protection suite of priority 1 encryption algorithm: Three key triple DES hash algorithm: Secure Hash Standard authentication method: Pre-Shared Key Diffie-Hellman group: #2 (1024 bit) lifetime: 86400 seconds, no volume limit Protection suite of priority 3 encryption algorithm: Three key triple DES hash algorithm: Secure Hash Standard authentication method: Pre-Shared Key Diffie-Hellman group: #1 (768 bit) lifetime: 86400 seconds, no volume limit ------------------ show cEHWC read error IC ESWGE I2C read error *Nov 21 16:17:36.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:36.675: EHWIC ESWGE I2C read error *Nov 21 16:17:37.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:37.355: EHWIC ESWGE I2rypto ipsec transform ------------------ Transform set default: { esp-aes esp-sha-hmac } will negotiate = { Transport, }, Transform set DIB: { esp-3des esp-sha-hmac } will negotiate = { Transport, }, ------------------ show crypto ipsec profile ------------------ IPSEC profile DM *Nov 21 16:17:37.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1VPNPROFILE Security association lifetime: 4608000 kilobytes/3600 seconds Responder-Only (Y/N): N PFS (Y/N): N Mixed-mode : Disabled Transform sets={ DIB: { esp-3des esp-sha-hma *Nov 21 16:17:37.435: EHWIC ESWGE I2C read error *Nov 21 16:17:37.559: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:38.239: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:38.239: EHWIC ESWGE I2C read error *Nov 21 1c } , } IPSEC profile default Security association lifetime: 4608000 kilobytes/3600 seconds Responder-Only (Y/N): N PFS (Y/N): N Mixed-mode : Disabled Transform sets={ default: { esp-aes esp-sha-hmac } , } ------------------ s6:17:38.319: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1how crypto isakmp sa ------------------ IPv4 Crypto ISAKMP SA dst src state conn-id status 192.168.241.36 192.168.245.158 MM_NO_STATE 0 ACTIVE 192.168.241.36 192.168.245.158 MM_NO_STATE 0 ACTIVE *Nov 21 16:17:38.319: EHWIC ESWGE I2C read error *Nov 21 16:17:38.999: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:38.999: EHWIC ESWGE I2C read error *Nov 21 16:17:39.079: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:(deleted) IPv6 Crypto ISAKMP SA ------------------ show crypto engine connection active ------------------ Crypto Engine Connections ID Type Algorithm Encrypt Decrypt LastSeqN IP-Address ------------------ show crypto ipsec sa ------------------ interface: Tunnel1 Crypto map tag: Tunnel1-head-0, local addr 192.168.245.158 protected vrf: (none) local ident (addr/mask/prot/port): (192.168.245.158/255.255.255.255/47/0) remote ident (addr/mask/p17:39.079: EHWIC ESWGE I2C read error *Nov 21 16:17:39.775: EHWIC ESWGE I2C read error *Nov 21 16:17:39.983: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:39.983: EHWIC ESWGE I2C read error *Nov 21 16:17:40.063: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C crot/port): (192.168.241.36/255.255.255.255/47/0) current_peer 192.168.241.36 port 500 PERMIT, flags={origin_is_acl,} #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 192.168.245.158, remote crypto endpt.: 192.168.md Write fail at in slot 1 *Nov 21 16:17:40.743: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:40.743: EHWIC ESWGE I2C read error *Nov 21 16:17:40.823: EHWIC ESWGE I2C read error *Nov 21 16:17:41.503: r %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:41.503: EHWIC ESWGE I2C read erro241.36 plaintext mtu 1352, path mtu 1352, ip mtu 1352, ip mtu idb Tunnel1 current outbound spi: 0x0(0) PFS (Y/N): N, DH group: none inbound esp sas: inbound ah sas: inbound pcp sas: outbound esp sas: outbound ah sas: outbound pcp sas: South-Silk-Gallery-RTR1# *Nov 21 16:17:41.583: EHWIC ESWGE I2C read error *Nov 21 16:17:41.683: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:42.363: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:42.363: EHWIC ESWGE I2C read error *Nov 21 16:17:42.443: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:42.443: EHWIC ESWGE I2C read error *Nov 21 16:17:43.123: %ESWGE_ERR-3-CMDQ_FULL: South-Silk-Gallery-RTR1# Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:43.123: EHWIC ESWGE I2C read error *Nov 21 16:17:43.203: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:43.203: EHWIC ESWGE I2C read error *Nov 21 16:17:43.883: EHWIC ESWGE I2C read error *Nov 21 16:17:44.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:44.107: EHWIC ESWGE I2C read error *Nov 21 16:17:44.187: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in sl South-Silk-Gallery-RTR1# ot 1 *Nov 21 16:17:44.867: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:44.867: EHWIC ESWGE I2C read error *Nov 21 16:17:44.947: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:44.947: EHWIC ESWGE I2C read error *Nov 21 16:17:45.627: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:45.627: EHWIC ESWGE I2C read error *Nov 21 16:17:45.707: %ESWGE_ERR-3-CMDQ_FUL South-Silk-Gallery-RTR1# L: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:45.707: EHWIC ESWGE I2C read error *Nov 21 16:17:45.907: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:46.587: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:46.587: EHWIC ESWGE I2C read error *Nov 21 16:17:46.667: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:46.667: EHWIC ESWGE I2C rea South-Silk-Gallery-RTR1# d error *Nov 21 16:17:47.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:47.347: EHWIC ESWGE I2C read error *Nov 21 16:17:47.427: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:47.427: EHWIC ESWGE I2C read error *Nov 21 16:17:48.107: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:48.107: EHWIC ESWGE I2C read error *Nov 21 16:17:48.187: %ESWGE_ERR-3-CMD South-Silk-Gallery-RTR1# Q_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:48.187: EHWIC ESWGE I2C read error *Nov 21 16:17:48.347: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:49.195: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:49.195: EHWIC ESWGE I2C read error *Nov 21 16:17:49.275: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:49.275: EHWIC ESWGE I2 South-Silk-Gallery-RTR1# C read error *Nov 21 16:17:49.955: EHWIC ESWGE I2C read error *Nov 21 16:17:50.179: EHWIC ESWGE I2C read error *Nov 21 16:17:50.259: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:50.939: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:50.939: EHWIC ESWGE I2C read error *Nov 21 16:17:51.019: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:51.019: EHWIC ESWG South-Silk-Gallery-RTR1# E I2C read error *Nov 21 16:17:51.699: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:51.699: EHWIC ESWGE I2C read error *Nov 21 16:17:51.779: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:51.779: EHWIC ESWGE I2C read error *Nov 21 16:17:52.459: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:52.459: EHWIC ESWGE I2C read error *Nov 21 16:17:52.539: %ESWGE_ South-Silk-Gallery-RTR1# ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:52.539: EHWIC ESWGE I2C read error *Nov 21 16:17:52.675: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:53.355: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:53.355: EHWIC ESWGE I2C read error *Nov 21 16:17:53.435: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:53.435: EHWIC South-Silk-Gallery-RTR1# ESWGE I2C read error *Nov 21 16:17:54.115: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:54.115: EHWIC ESWGE I2C read error *Nov 21 16:17:54.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:54.251: EHWIC ESWGE I2C read error *Nov 21 16:17:54.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:55.011: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cm South-Silk-Gallery-RTR1# d Read fail at in slot 1 *Nov 21 16:17:55.011: EHWIC ESWGE I2C read error *Nov 21 16:17:55.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:55.091: EHWIC ESWGE I2C read error *Nov 21 16:17:55.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:55.771: EHWIC ESWGE I2C read error *Nov 21 16:17:55.851: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:55.851: South-Silk-Gallery-RTR1# EHWIC ESWGE I2C read error *Nov 21 16:17:56.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:56.531: EHWIC ESWGE I2C read error *Nov 21 16:17:56.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:56.611: EHWIC ESWGE I2C read error *Nov 21 16:17:56.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:57.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I South-Silk-Gallery-RTR1# 2C cmd Read fail at in slot 1 *Nov 21 16:17:57.371: EHWIC ESWGE I2C read error *Nov 21 16:17:57.451: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:57.451: EHWIC ESWGE I2C read error *Nov 21 16:17:58.131: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:58.131: EHWIC ESWGE I2C read error *Nov 21 16:17:58.211: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:58. South-Silk-Gallery-RTR1# 211: EHWIC ESWGE I2C read error *Nov 21 16:17:58.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:17:58.971: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:58.971: EHWIC ESWGE I2C read error *Nov 21 16:17:59.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:59.051: EHWIC ESWGE I2C read error *Nov 21 16:17:59.731: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Fu South-Silk-Gallery-RTR1# ll, I2C cmd Read fail at in slot 1 *Nov 21 16:17:59.731: EHWIC ESWGE I2C read error *Nov 21 16:17:59.811: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:17:59.811: EHWIC ESWGE I2C read error *Nov 21 16:18:00.491: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:00.491: EHWIC ESWGE I2C read error *Nov 21 16:18:00.571: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:1 South-Silk-Gallery-RTR1# 8:00.571: EHWIC ESWGE I2C read error *Nov 21 16:18:00.651: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:18:01.331: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:01.331: EHWIC ESWGE I2C read error *Nov 21 16:18:01.411: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:01.411: EHWIC ESWGE I2C read error *Nov 21 16:18:02.091: %ESWGE_ERR-3-CMDQ_FULL: Command queue South-Silk-Gallery-RTR1# is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:02.091: EHWIC ESWGE I2C read error *Nov 21 16:18:02.171: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:02.171: EHWIC ESWGE I2C read error *Nov 21 16:18:02.251: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:18:02.931: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:02.931: EHWIC ESWGE I2C read error *Nov 2 South-Silk-Gallery-RTR1# 1 16:18:03.011: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:03.011: EHWIC ESWGE I2C read error *Nov 21 16:18:03.691: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:03.691: EHWIC ESWGE I2C read error *Nov 21 16:18:03.771: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:03.771: EHWIC ESWGE I2C read error *Nov 21 16:18:04.451: %ESWGE_ERR-3-CMDQ_FULL: Command q South-Silk-Gallery-RTR1# ueue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:04.451: EHWIC ESWGE I2C read error *Nov 21 16:18:04.531: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:04.531: EHWIC ESWGE I2C read error *Nov 21 16:18:04.611: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Write fail at in slot 1 *Nov 21 16:18:05.291: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:05.291: EHWIC ESWGE I2C read error * South-Silk-Gallery-RTR1# Nov 21 16:18:05.371: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:05.371: EHWIC ESWGE I2C read error *Nov 21 16:18:06.051: %ESWGE_ERR-3-CMDQ_FULL: Command queue is Full, I2C cmd Read fail at in slot 1 *Nov 21 16:18:06.051: EHWIC ESWGE I2C read error