C220-FCH2205V21D# connect host CISCO Serial Over LAN: Press Ctrl+x to Exit the session Configuring platform hardware... Press Setup, Boot Menu, Diagnostics, Cisco IMC Configuration, Network Boot Bios Version : C220M4.4.0.1c.0.0711181559 Platform ID : C220M4 Cisco IMC IPv4 Address : 10.166.4.15 Cisco IMC MAC Address : 70:69:5A:C9:B8:70 Processor(s) Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz Total Memory = 64 GB Effective Memory = 64 GB Memory Operating Speed 1600 Mhz Configuring platform hardware... Press Setup, Boot Menu, Diagnostics, Cisco IMC Configuration, Network Boot Bios Version : C220M4.4.0.1c.0.0711181559 Platform ID : C220M4 Cisco IMC IPv4 Address : 10.166.4.15 Cisco IMC MAC Address : 70:69:5A:C9:B8:70 Processor(s) Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz Total Memory = 64 GB Effective Memory = 64 GB Memory Operating Speed 1600 Mhz Entering boot selection menu... Probing EDD (edd=off to disable)... ok Linux version 4.14.57 (root@jenkinsProduction-Atom-Kernel-atomix-master-271kernel) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #1 SMP Thu Aug 2 01:11:08 UTC 2018 Command line: initrd=initrd.img verbose debug console=tty0 console=ttyS0,38400n8 BOOT_IMAGE=vmlinuz x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x0000000000099fff] usable BIOS-e820: [mem 0x000000000009a000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000006b59efff] usable BIOS-e820: [mem 0x000000006b59f000-0x000000006effcfff] ACPI data BIOS-e820: [mem 0x000000006effd000-0x000000006f7f0fff] reserved BIOS-e820: [mem 0x000000006f7f1000-0x000000006f971fff] ACPI data BIOS-e820: [mem 0x000000006f972000-0x000000006fd93fff] ACPI NVS BIOS-e820: [mem 0x000000006fd94000-0x000000008fffffff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable NX (Execute Disable) protection: active SMBIOS 3.0.0 present. DMI: Cisco Systems Inc APIC-SERVER-M2/UCSC-C220-M4S, BIOS C220M4.4.0.1c.0.0711181559 07/11/2018 tsc: Fast TSC calibration using PIT e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000080000000 mask 3FFF80000000 uncachable 1 base 038000000000 mask 3F8000000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled 8 disabled 9 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT e820: last_pfn = 0x6b59f max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000fcf50-0x000fcf5f] mapped at [ffffffffff200f50] Base memory trampoline at [ffff880000094000] 94000 size 24576 Using GB pages for direct mapping BRK [0x0312f000, 0x0312ffff] PGTABLE BRK [0x03130000, 0x03130fff] PGTABLE BRK [0x03131000, 0x03131fff] PGTABLE RAMDISK: [mem 0x66a0d000-0x6b57dfff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F05B0 000024 (v02 Cisco0) ACPI: XSDT 0x000000006B59F0B0 0000DC (v01 Cisco0 CiscoUCS 01072009 AMI 00010013) ACPI: FACP 0x000000006B5D3A78 00010C (v05 Cisco0 CiscoUCS 01072009 AMI 00010013) ACPI: DSDT 0x000000006B59F218 03485C (v02 Cisco0 CiscoUCS 01072009 INTL 20091013) ACPI: FACS 0x000000006FD92F80 000040 ACPI: APIC 0x000000006B5D3B88 00010C (v03 Cisco0 CiscoUCS 01072009 AMI 00010013) ACPI: FPDT 0x000000006B5D3C98 000044 (v01 Cisco0 CiscoUCS 01072009 AMI 00010013) ACPI: FIDT 0x000000006B5D3CE0 00009C (v01 Cisco0 CiscoUCS 01072009 AMI 00010013) ACPI: SPMI 0x000000006B5D3D80 000041 (v05 Cisco0 CiscoUCS 00000000 AMI. 00000000) ACPI: TCPA 0x000000006B5D3DC8 000032 (v02 ALASKA NAPAASF 00000000 MSFT 01000013) ACPI: MCFG 0x000000006B5D3E00 00003C (v01 Cisco0 CiscoUCS 01072009 MSFT 00000097) ACPI: UEFI 0x000000006B5D3E40 000042 (v01 Cisco0 CiscoUCS 01072009 00000000) ACPI: HPET 0x000000006B5D3E88 000038 (v01 Cisco0 CiscoUCS 00000001 INTL 20091013) ACPI: MSCT 0x000000006B5D3EC0 000090 (v01 Cisco0 CiscoUCS 00000001 INTL 20091013) ACPI: SLIT 0x000000006B5D3F50 000030 (v01 Cisco0 CiscoUCS 00000001 INTL 20091013) ACPI: SRAT 0x000000006B5D3F80 001158 (v03 Cisco0 CiscoUCS 00000001 INTL 20091013) ACPI: WDDT 0x000000006B5D50D8 000040 (v01 Cisco0 CiscoUCS 00000000 INTL 20091013) ACPI: SSDT 0x000000006B5D5118 016E9F (v02 Cisco0 PmMgt 00000002 INTL 20120913) ACPI: NITR 0x000000006B5EBFB8 000071 (v02 Cisco0 CiscoUCS 00000001 INTL 20091013) ACPI: SSDT 0x000000006B5EC030 002654 (v02 Cisco0 SpsNm 00000002 INTL 20120913) ACPI: SSDT 0x000000006B5EE688 000064 (v02 Cisco0 SpsNvs 00000002 INTL 20120913) ACPI: PRAD 0x000000006B5EE6F0 000102 (v02 Cisco0 CiscoUCS 00000002 INTL 20120913) ACPI: DMAR 0x000000006B5EE7F8 000122 (v01 Cisco0 CiscoUCS 00000001 INTL 20091013) ACPI: HEST 0x000000006B5EE920 0000A8 (v01 Cisco0 CiscoUCS 00000001 INTL 00000001) ACPI: BERT 0x000000006B5EE9C8 000030 (v01 Cisco0 CiscoUCS 00000001 INTL 00000001) ACPI: ERST 0x000000006B5EE9F8 000230 (v01 Cisco0 CiscoUCS 00000001 INTL 00000001) ACPI: EINJ 0x000000006B5EEC28 000130 (v01 Cisco0 CiscoUCS 00000001 INTL 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x02 -> Node 0 SRAT: PXM 0 -> APIC 0x04 -> Node 0 SRAT: PXM 0 -> APIC 0x06 -> Node 0 SRAT: PXM 0 -> APIC 0x08 -> Node 0 SRAT: PXM 0 -> APIC 0x0a -> Node 0 SRAT: PXM 1 -> APIC 0x10 -> Node 1 SRAT: PXM 1 -> APIC 0x12 -> Node 1 SRAT: PXM 1 -> APIC 0x14 -> Node 1 SRAT: PXM 1 -> APIC 0x16 -> Node 1 SRAT: PXM 1 -> APIC 0x18 -> Node 1 SRAT: PXM 1 -> APIC 0x1a -> Node 1 ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff] ACPI: SRAT: Node 1 PXM 1 [mem 0x880000000-0x107fffffff] NUMA: Initialized distance table, cnt=2 NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff] NODE_DATA(0) allocated [mem 0x87ffde000-0x87fffffff] NODE_DATA(1) allocated [mem 0x107ffdb000-0x107fffcfff] Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000107fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x0000000000099fff] node 0: [mem 0x0000000000100000-0x000000006b59efff] node 0: [mem 0x0000000100000000-0x000000087fffffff] node 1: [mem 0x0000000880000000-0x000000107fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] On node 0 totalpages: 8303928 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3993 pages, LIFO batch:0 DMA32 zone: 6807 pages used for memmap DMA32 zone: 435615 pages, LIFO batch:31 Normal zone: 122880 pages used for memmap Normal zone: 7864320 pages, LIFO batch:31 Initmem setup node 1 [mem 0x0000000880000000-0x000000107fffffff] On node 1 totalpages: 8388608 Normal zone: 131072 pages used for memmap Normal zone: 8388608 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 smpboot: Allowing 12 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: Registered nosave memory: [mem 0x6b59f000-0x6effcfff] PM: Registered nosave memory: [mem 0x6effd000-0x6f7f0fff] PM: Registered nosave memory: [mem 0x6f7f1000-0x6f971fff] PM: Registered nosave memory: [mem 0x6f972000-0x6fd93fff] PM: Registered nosave memory: [mem 0x6fd94000-0x8fffffff] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:2 percpu: Embedded 44 pages/cpu @ffff880860000000 s139544 r8192 d32488 u262144 pcpu-alloc: s139544 r8192 d32488 u262144 alloc=1*2097152 pcpu-alloc: [0] 00 01 02 03 04 05 -- -- [1] 06 07 08 09 10 11 -- -- Built 2 zonelists, mobility grouping on. Total pages: 16431692 Policy zone: Normal Kernel command line: initrd=initrd.img verbose debug console=tty0 console=ttyS0,38400n8 BOOT_IMAGE=vmlinuz PID hash table entries: 4096 (order: 3, 32768 bytes) Memory: 65545860K/66770144K available (14348K kernel code, 2482K rwdata, 4624K rodata, 2396K init, 2152K bss, 1224284K reserved, 0K cma-reserved) Kernel/User page tables isolation: enabled ftrace: allocating 43195 entries in 169 pages Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 NR_IRQS: 524544, nr_irqs: 1336, preallocated irqs: 16 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 1895.375 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.75 BogoMIPS (lpj=1895375) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20170728 ACPI: 4 ACPI AML tables successfully acquired and loaded Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 22 MCE banks CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 Spectre V2 : Mitigation: Full generic retpoline Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier Spectre V2 : Enabling Restricted Speculation for firmware calls Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl Freeing SMP alternatives memory: 44K smpboot: Max logical packages: 2 Switched APIC routing to physical flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 TSC deadline timer enabled smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz (family: 0x6, model: 0x3f, stepping: 0x2) Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 8 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 00000007000000ff Hierarchical SRCU implementation. NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 #4 #5 .... node #1, CPUs: #6 #7 #8 #9 #10 #11 smp: Brought up 2 nodes, 12 CPUs smpboot: Total of 12 processors activated (45525.00 BogoMIPS) devtmpfs: initialized x86/mm: Memory block size: 2048MB PM: Registering ACPI NVS region [mem 0x6f972000-0x6fd93fff] (4333568 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns futex hash table entries: 4096 (order: 6, 262144 bytes) NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 PCI: Using configuration type 1 for base access core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: Dynamic OEM Table Load: ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing HEST: Table parsing has been initialized. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: GPE 0x24 active on init ACPI: Enabled 5 GPEs in block 00 to 3F ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A03:02: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:ff pci_bus 0000:ff: root bus resource [bus ff] pci 0000:ff:08.0: [8086:2f80] type 00 class 0x088000 pci 0000:ff:08.2: [8086:2f32] type 00 class 0x110100 pci 0000:ff:08.3: [8086:2f83] type 00 class 0x088000 pci 0000:ff:09.0: [8086:2f90] type 00 class 0x088000 pci 0000:ff:09.2: [8086:2f33] type 00 class 0x110100 pci 0000:ff:09.3: [8086:2f93] type 00 class 0x088000 pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000 pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100 pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100 pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000 pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000 pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000 pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000 pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000 pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000 pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000 pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000 pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000 pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000 pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000 pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000 pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000 pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000 pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100 pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000 pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100 pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000 pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000 pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100 pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000 pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100 pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000 pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000 pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000 pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000 pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000 pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000 pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000 pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000 pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000 pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000 pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000 pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000 pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000 pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000 pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000 pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000 pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000 pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000 pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000 pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000 pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000 pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000 pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000 pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000 pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000 pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000 pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000 pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000 pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000 pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000 pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000 pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000 pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000 pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000 pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000 ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f]) acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:7f pci_bus 0000:7f: root bus resource [bus 7f] pci 0000:7f:08.0: [8086:2f80] type 00 class 0x088000 pci 0000:7f:08.2: [8086:2f32] type 00 class 0x110100 pci 0000:7f:08.3: [8086:2f83] type 00 class 0x088000 pci 0000:7f:09.0: [8086:2f90] type 00 class 0x088000 pci 0000:7f:09.2: [8086:2f33] type 00 class 0x110100 pci 0000:7f:09.3: [8086:2f93] type 00 class 0x088000 pci 0000:7f:0b.0: [8086:2f81] type 00 class 0x088000 pci 0000:7f:0b.1: [8086:2f36] type 00 class 0x110100 pci 0000:7f:0b.2: [8086:2f37] type 00 class 0x110100 pci 0000:7f:0c.0: [8086:2fe0] type 00 class 0x088000 pci 0000:7f:0c.1: [8086:2fe1] type 00 class 0x088000 pci 0000:7f:0c.2: [8086:2fe2] type 00 class 0x088000 pci 0000:7f:0c.3: [8086:2fe3] type 00 class 0x088000 pci 0000:7f:0c.4: [8086:2fe4] type 00 class 0x088000 pci 0000:7f:0c.5: [8086:2fe5] type 00 class 0x088000 pci 0000:7f:0f.0: [8086:2ff8] type 00 class 0x088000 pci 0000:7f:0f.1: [8086:2ff9] type 00 class 0x088000 pci 0000:7f:0f.2: [8086:2ffa] type 00 class 0x088000 pci 0000:7f:0f.3: [8086:2ffb] type 00 class 0x088000 pci 0000:7f:0f.4: [8086:2ffc] type 00 class 0x088000 pci 0000:7f:0f.5: [8086:2ffd] type 00 class 0x088000 pci 0000:7f:0f.6: [8086:2ffe] type 00 class 0x088000 pci 0000:7f:10.0: [8086:2f1d] type 00 class 0x088000 pci 0000:7f:10.1: [8086:2f34] type 00 class 0x110100 pci 0000:7f:10.5: [8086:2f1e] type 00 class 0x088000 pci 0000:7f:10.6: [8086:2f7d] type 00 class 0x110100 pci 0000:7f:10.7: [8086:2f1f] type 00 class 0x088000 pci 0000:7f:12.0: [8086:2fa0] type 00 class 0x088000 pci 0000:7f:12.1: [8086:2f30] type 00 class 0x110100 pci 0000:7f:12.4: [8086:2f60] type 00 class 0x088000 pci 0000:7f:12.5: [8086:2f38] type 00 class 0x110100 pci 0000:7f:13.0: [8086:2fa8] type 00 class 0x088000 pci 0000:7f:13.1: [8086:2f71] type 00 class 0x088000 pci 0000:7f:13.2: [8086:2faa] type 00 class 0x088000 pci 0000:7f:13.3: [8086:2fab] type 00 class 0x088000 pci 0000:7f:13.6: [8086:2fae] type 00 class 0x088000 pci 0000:7f:13.7: [8086:2faf] type 00 class 0x088000 pci 0000:7f:14.0: [8086:2fb0] type 00 class 0x088000 pci 0000:7f:14.1: [8086:2fb1] type 00 class 0x088000 pci 0000:7f:14.2: [8086:2fb2] type 00 class 0x088000 pci 0000:7f:14.3: [8086:2fb3] type 00 class 0x088000 pci 0000:7f:14.4: [8086:2fbc] type 00 class 0x088000 pci 0000:7f:14.5: [8086:2fbd] type 00 class 0x088000 pci 0000:7f:14.6: [8086:2fbe] type 00 class 0x088000 pci 0000:7f:14.7: [8086:2fbf] type 00 class 0x088000 pci 0000:7f:16.0: [8086:2f68] type 00 class 0x088000 pci 0000:7f:16.1: [8086:2f79] type 00 class 0x088000 pci 0000:7f:16.2: [8086:2f6a] type 00 class 0x088000 pci 0000:7f:16.3: [8086:2f6b] type 00 class 0x088000 pci 0000:7f:16.6: [8086:2f6e] type 00 class 0x088000 pci 0000:7f:16.7: [8086:2f6f] type 00 class 0x088000 pci 0000:7f:17.0: [8086:2fd0] type 00 class 0x088000 pci 0000:7f:17.1: [8086:2fd1] type 00 class 0x088000 pci 0000:7f:17.2: [8086:2fd2] type 00 class 0x088000 pci 0000:7f:17.3: [8086:2fd3] type 00 class 0x088000 pci 0000:7f:17.4: [8086:2fb8] type 00 class 0x088000 pci 0000:7f:17.5: [8086:2fb9] type 00 class 0x088000 pci 0000:7f:17.6: [8086:2fba] type 00 class 0x088000 pci 0000:7f:17.7: [8086:2fbb] type 00 class 0x088000 pci 0000:7f:1e.0: [8086:2f98] type 00 class 0x088000 pci 0000:7f:1e.1: [8086:2f99] type 00 class 0x088000 pci 0000:7f:1e.2: [8086:2f9a] type 00 class 0x088000 pci 0000:7f:1e.3: [8086:2fc0] type 00 class 0x088000 pci 0000:7f:1e.4: [8086:2f9c] type 00 class 0x088000 pci 0000:7f:1f.0: [8086:2f88] type 00 class 0x088000 pci 0000:7f:1f.2: [8086:2f8a] type 00 class 0x088000 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window] pci_bus 0000:00: root bus resource [mem 0x38000000000-0x3bfffffffff window] pci_bus 0000:00: root bus resource [bus 00-7e] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000 pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400 pci 0000:00:01.1: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400 pci 0000:00:02.2: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400 pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000 pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000 pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000 pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020 pci 0000:00:05.4: reg 0x10: [mem 0xc7405000-0xc7405fff] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 pci 0000:00:11.4: reg 0x10: [io 0x7110-0x7117] pci 0000:00:11.4: reg 0x14: [io 0x7100-0x7103] pci 0000:00:11.4: reg 0x18: [io 0x70f0-0x70f7] pci 0000:00:11.4: reg 0x1c: [io 0x70e0-0x70e3] pci 0000:00:11.4: reg 0x20: [io 0x7020-0x703f] pci 0000:00:11.4: reg 0x24: [mem 0xc7404000-0xc74047ff] pci 0000:00:11.4: PME# supported from D3hot pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0x3bffff13000-0x3bffff1300f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 pci 0000:00:16.1: reg 0x10: [mem 0x3bffff12000-0x3bffff1200f 64bit] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 pci 0000:00:1a.0: reg 0x10: [mem 0xc7402000-0xc74023ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 0x10: [mem 0xc7401000-0xc74013ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io 0x7070-0x7077] pci 0000:00:1f.2: reg 0x14: [io 0x7060-0x7063] pci 0000:00:1f.2: reg 0x18: [io 0x7050-0x7057] pci 0000:00:1f.2: reg 0x1c: [io 0x7040-0x7043] pci 0000:00:1f.2: reg 0x20: [io 0x7000-0x701f] pci 0000:00:1f.2: reg 0x24: [mem 0xc7400000-0xc74007ff] pci 0000:00:1f.2: PME# supported from D3hot acpiphp: Slot [0] registered pci 0000:01:00.0: [8086:1521] type 00 class 0x020000 pci 0000:01:00.0: reg 0x10: [mem 0xc6e00000-0xc6efffff] pci 0000:01:00.0: reg 0x18: [io 0x6020-0x603f] pci 0000:01:00.0: reg 0x1c: [mem 0xc7004000-0xc7007fff] pci 0000:01:00.0: reg 0x30: [mem 0xc6f80000-0xc6ffffff pref] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: reg 0x184: [mem 0x3bfffe60000-0x3bfffe63fff 64bit pref] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x3bfffe60000-0x3bfffe7ffff 64bit pref] (contains BAR0 for 8 VFs) pci 0000:01:00.0: reg 0x190: [mem 0x3bfffe40000-0x3bfffe43fff 64bit pref] pci 0000:01:00.0: VF(n) BAR3 space: [mem 0x3bfffe40000-0x3bfffe5ffff 64bit pref] (contains BAR3 for 8 VFs) pci 0000:01:00.1: [8086:1521] type 00 class 0x020000 pci 0000:01:00.1: reg 0x10: [mem 0xc6d00000-0xc6dfffff] pci 0000:01:00.1: reg 0x18: [io 0x6000-0x601f] pci 0000:01:00.1: reg 0x1c: [mem 0xc7000000-0xc7003fff] pci 0000:01:00.1: reg 0x30: [mem 0xc6f00000-0xc6f7ffff pref] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold pci 0000:01:00.1: reg 0x184: [mem 0x3bfffe20000-0x3bfffe23fff 64bit pref] pci 0000:01:00.1: VF(n) BAR0 space: [mem 0x3bfffe20000-0x3bfffe3ffff 64bit pref] (contains BAR0 for 8 VFs) pci 0000:01:00.1: reg 0x190: [mem 0x3bfffe00000-0x3bfffe03fff 64bit pref] pci 0000:01:00.1: VF(n) BAR3 space: [mem 0x3bfffe00000-0x3bfffe1ffff 64bit pref] (contains BAR3 for 8 VFs) pci 0000:00:01.0: PCI bridge to [bus 01-02] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] pci 0000:00:01.0: bridge window [mem 0xc6d00000-0xc70fffff] pci 0000:00:01.0: bridge window [mem 0x3bfffe00000-0x3bfffefffff 64bit pref] pci 0000:00:01.1: PCI bridge to [bus 03] pci 0000:00:02.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1000:005d] type 00 class 0x010400 pci 0000:05:00.0: reg 0x10: [io 0x5000-0x50ff] pci 0000:05:00.0: reg 0x14: [mem 0xc7300000-0xc730ffff 64bit] pci 0000:05:00.0: reg 0x1c: [mem 0xc7200000-0xc72fffff 64bit] pci 0000:05:00.0: reg 0x30: [mem 0xc7100000-0xc71fffff pref] pci 0000:05:00.0: enabling Extended Tags pci 0000:05:00.0: supports D1 D2 pci 0000:00:02.2: PCI bridge to [bus 05] pci 0000:00:02.2: bridge window [io 0x5000-0x5fff] pci 0000:00:02.2: bridge window [mem 0xc7100000-0xc73fffff] pci 0000:06:00.0: [1137:004e] type 01 class 0x060400 pci 0000:06:00.0: enabling Extended Tags pci 0000:06:00.0: PME# supported from D0 D3hot pci 0000:00:03.0: PCI bridge to [bus 06-0c] pci 0000:00:03.0: bridge window [mem 0xc6900000-0xc6cfffff] pci 0000:07:00.0: [1137:0041] type 01 class 0x060400 pci 0000:07:00.0: reg 0x10: [mem 0xc6c00000-0xc6c0ffff 64bit] pci 0000:07:00.0: enabling Extended Tags pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:01.0: [1137:0041] type 01 class 0x060400 pci 0000:07:01.0: enabling Extended Tags pci 0000:07:01.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PCI bridge to [bus 07-0c] pci 0000:06:00.0: bridge window [mem 0xc6900000-0xc6cfffff] pci 0000:08:00.0: [1137:0042] type 00 class 0x00ff00 pci 0000:08:00.0: reg 0x10: [mem 0xc6b02000-0xc6b02fff 64bit] pci 0000:08:00.0: reg 0x18: [mem 0xc6b00000-0xc6b01fff 64bit] pci 0000:08:00.0: enabling Extended Tags pci 0000:07:00.0: PCI bridge to [bus 08] pci 0000:07:00.0: bridge window [mem 0xc6b00000-0xc6bfffff] pci 0000:09:00.0: [1137:0040] type 01 class 0x060400 pci 0000:09:00.0: enabling Extended Tags pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:01.0: PCI bridge to [bus 09-0c] pci 0000:07:01.0: bridge window [mem 0xc6900000-0xc6afffff] pci 0000:0a:00.0: [1137:0041] type 01 class 0x060400 pci 0000:0a:00.0: enabling Extended Tags pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:01.0: [1137:0041] type 01 class 0x060400 pci 0000:0a:01.0: enabling Extended Tags pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PCI bridge to [bus 0a-0c] pci 0000:09:00.0: bridge window [mem 0xc6900000-0xc6afffff] pci 0000:0b:00.0: [1137:0043] type 00 class 0x020000 pci 0000:0b:00.0: reg 0x10: [mem 0xc6a00000-0xc6a07fff 64bit] pci 0000:0b:00.0: reg 0x18: [mem 0xc6a08000-0xc6a09fff 64bit] pci 0000:0b:00.0: enabling Extended Tags pci 0000:0a:00.0: PCI bridge to [bus 0b] pci 0000:0a:00.0: bridge window [mem 0xc6a00000-0xc6afffff] pci 0000:0c:00.0: [1137:0043] type 00 class 0x020000 pci 0000:0c:00.0: reg 0x10: [mem 0xc6900000-0xc6907fff 64bit] pci 0000:0c:00.0: reg 0x18: [mem 0xc6908000-0xc6909fff 64bit] pci 0000:0c:00.0: enabling Extended Tags pci 0000:0a:01.0: PCI bridge to [bus 0c] pci 0000:0a:01.0: bridge window [mem 0xc6900000-0xc69fffff] pci 0000:00:1c.0: PCI bridge to [bus 0d] pci 0000:0e:00.0: [102b:0522] type 00 class 0x030000 pci 0000:0e:00.0: reg 0x10: [mem 0xc5000000-0xc5ffffff] pci 0000:0e:00.0: reg 0x14: [mem 0xc6810000-0xc6813fff] pci 0000:0e:00.0: reg 0x18: [mem 0xc6000000-0xc67fffff] pci 0000:0e:00.0: reg 0x30: [mem 0xc6800000-0xc680ffff pref] pci 0000:00:1c.3: PCI bridge to [bus 0e] pci 0000:00:1c.3: bridge window [mem 0xc5000000-0xc68fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe]) acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:80 pci_bus 0000:80: root bus resource [io 0x8000-0xffff window] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window] pci_bus 0000:80: root bus resource [mem 0x3c000000000-0x3ffffffffff window] pci_bus 0000:80: root bus resource [bus 80-fe] pci 0000:80:02.0: [8086:2f04] type 01 class 0x060400 pci 0000:80:02.0: PME# supported from D0 D3hot D3cold pci 0000:80:05.0: [8086:2f28] type 00 class 0x088000 pci 0000:80:05.1: [8086:2f29] type 00 class 0x088000 pci 0000:80:05.2: [8086:2f2a] type 00 class 0x088000 pci 0000:80:05.4: [8086:2f2c] type 00 class 0x080020 pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff] pci 0000:80:02.0: PCI bridge to [bus 81] pci_bus 0000:80: on NUMA node 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. pci 0000:0e:00.0: vgaarb: setting as boot VGA device pci 0000:0e:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:0e:00.0: vgaarb: bridge control possible vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] e820: reserve RAM buffer [mem 0x6b59f000-0x6bffffff] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter clocksource: Switched to clocksource hpet VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) pnp: PnP ACPI init pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) system 00:01: [io 0x0500-0x057f] has been reserved system 00:01: [io 0x0400-0x047f] has been reserved system 00:01: [io 0x0580-0x059f] has been reserved system 00:01: [io 0x0600-0x061f] has been reserved system 00:01: [io 0x0880-0x0883] has been reserved system 00:01: [io 0x0800-0x081f] has been reserved system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved system 00:01: [mem 0xff000000-0xffffffff] has been reserved system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [dma 0 disabled] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:03: [dma 0 disabled] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0c31 (active) pnp: PnP ACPI: found 5 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:01.0: PCI bridge to [bus 01-02] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] pci 0000:00:01.0: bridge window [mem 0xc6d00000-0xc70fffff] pci 0000:00:01.0: bridge window [mem 0x3bfffe00000-0x3bfffefffff 64bit pref] pci 0000:00:01.1: PCI bridge to [bus 03] pci 0000:00:02.0: PCI bridge to [bus 04] pci 0000:00:02.2: PCI bridge to [bus 05] pci 0000:00:02.2: bridge window [io 0x5000-0x5fff] pci 0000:00:02.2: bridge window [mem 0xc7100000-0xc73fffff] pci 0000:07:00.0: PCI bridge to [bus 08] pci 0000:07:00.0: bridge window [mem 0xc6b00000-0xc6bfffff] pci 0000:0a:00.0: PCI bridge to [bus 0b] pci 0000:0a:00.0: bridge window [mem 0xc6a00000-0xc6afffff] pci 0000:0a:01.0: PCI bridge to [bus 0c] pci 0000:0a:01.0: bridge window [mem 0xc6900000-0xc69fffff] pci 0000:09:00.0: PCI bridge to [bus 0a-0c] pci 0000:09:00.0: bridge window [mem 0xc6900000-0xc6afffff] pci 0000:07:01.0: PCI bridge to [bus 09-0c] pci 0000:07:01.0: bridge window [mem 0xc6900000-0xc6afffff] pci 0000:06:00.0: PCI bridge to [bus 07-0c] pci 0000:06:00.0: bridge window [mem 0xc6900000-0xc6cfffff] pci 0000:00:03.0: PCI bridge to [bus 06-0c] pci 0000:00:03.0: bridge window [mem 0xc6900000-0xc6cfffff] pci 0000:00:1c.0: PCI bridge to [bus 0d] pci 0000:00:1c.3: PCI bridge to [bus 0e] pci 0000:00:1c.3: bridge window [mem 0xc5000000-0xc68fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window] pci_bus 0000:00: resource 8 [mem 0x38000000000-0x3bfffffffff window] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] pci_bus 0000:01: resource 1 [mem 0xc6d00000-0xc70fffff] pci_bus 0000:01: resource 2 [mem 0x3bfffe00000-0x3bfffefffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] pci_bus 0000:05: resource 1 [mem 0xc7100000-0xc73fffff] pci_bus 0000:06: resource 1 [mem 0xc6900000-0xc6cfffff] pci_bus 0000:07: resource 1 [mem 0xc6900000-0xc6cfffff] pci_bus 0000:08: resource 1 [mem 0xc6b00000-0xc6bfffff] pci_bus 0000:09: resource 1 [mem 0xc6900000-0xc6afffff] pci_bus 0000:0a: resource 1 [mem 0xc6900000-0xc6afffff] pci_bus 0000:0b: resource 1 [mem 0xc6a00000-0xc6afffff] pci_bus 0000:0c: resource 1 [mem 0xc6900000-0xc69fffff] pci_bus 0000:0e: resource 1 [mem 0xc5000000-0xc68fffff] pci 0000:80:02.0: PCI bridge to [bus 81] pci_bus 0000:80: resource 4 [io 0x8000-0xffff window] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window] pci_bus 0000:80: resource 6 [mem 0x3c000000000-0x3ffffffffff window] NET: Registered protocol family 2 TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) UDP hash table entries: 32768 (order: 8, 1048576 bytes) UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS mismatch (64 != 32), using 64 bytes pci 0000:0e:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] Trying to unpack rootfs image as initramfs... Freeing initrd memory: 77252K PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0x62a0d000-0x66a0d000] (64MB) mapped at [ffff880062a0d000-ffff880066a0cfff] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules audit: initializing netlink subsys (disabled) audit: type=2000 audit(1541582136.570:1): state=initialized audit_enabled=0 res=1 workingset: timestamp_bits=36 max_order=24 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type random: get_random_bytes called from key_alloc+0x207/0x410 with crng_init=0 Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... fuse init (API version 7.26) SELinux: Registering netfilter hooks NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered pcieport 0000:00:01.0: AER enabled with IRQ 25 pcieport 0000:00:01.1: AER enabled with IRQ 26 pcieport 0000:00:02.0: AER enabled with IRQ 28 pcieport 0000:00:02.2: AER enabled with IRQ 29 pcieport 0000:00:03.0: AER enabled with IRQ 31 pcieport 0000:80:02.0: AER enabled with IRQ 36 pcieport 0000:00:01.0: Signaling PME with IRQ 25 pcieport 0000:00:01.1: Signaling PME with IRQ 26 pcieport 0000:00:02.0: Signaling PME with IRQ 28 pcieport 0000:00:02.2: Signaling PME with IRQ 29 pcieport 0000:00:03.0: Signaling PME with IRQ 31 pcieport 0000:00:1c.0: Signaling PME with IRQ 32 pcieport 0000:00:1c.3: Signaling PME with IRQ 33 pcieport 0000:80:02.0: Signaling PME with IRQ 36 intel_idle: MWAIT substates: 0x2120 intel_idle: v0.4.1 model 0x3F intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [P111] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ERST: Error Record Serialization Table (ERST) support is initialized. pstore: using zlib compression pstore: Registered erst as persistent store backend ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports. ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly. ghes_edac: So, the end result of using this driver varies from vendor to vendor. ghes_edac: If you find incorrect reports, please contact your hardware vendor ghes_edac: to correct its BIOS. ghes_edac: This system has 24 DIMM sockets. EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. ioatdma: Intel(R) QuickData Technology Driver 4.00 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 tpm_tis 00:04: 1.2 TPM (device-id 0x3205, rev-id 80) tsc: Refined TSC clocksource calibration: 1895.432 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a4a1ceb86, max_idle_ns: 881590674447 ns brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. bnx2fc: QLogic FCoE Driver bnx2fc v2.11.8 (October 15, 2015) iscsi: registered transport (tcp) isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver megasas: 07.702.06.00-rc1 megaraid_sas 0000:05:00.0: FW now in Ready state megaraid_sas 0000:05:00.0: firmware supports msix : (96) megaraid_sas 0000:05:00.0: current msix/online cpus : (12/12) megaraid_sas 0000:05:00.0: RDPQ mode : (disabled) megaraid_sas 0000:05:00.0: Current firmware maximum commands: 272 LDIO threshold: 237 megaraid_sas 0000:05:00.0: FW supports sync cache : No megaraid_sas 0000:05:00.0: firmware type : Legacy(64 VD) firmware megaraid_sas 0000:05:00.0: controller type : iMR(0MB) megaraid_sas 0000:05:00.0: Online Controller Reset(OCR) : Enabled megaraid_sas 0000:05:00.0: Secure JBOD support : Yes megaraid_sas 0000:05:00.0: INIT adapter done megaraid_sas 0000:05:00.0: pci id : (0x1000)/(0x005d)/(0x1137)/(0x00db) megaraid_sas 0000:05:00.0: unevenspan support : no megaraid_sas 0000:05:00.0: firmware crash dump : no megaraid_sas 0000:05:00.0: jbod sync map : yes scsi host0: Avago SAS based MegaRAID driver libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) scsi 0:2:0:0: Direct-Access Cisco UCSC-MRAID12G 4.62 PQ: 0 ANSI: 5 scsi 0:2:1:0: Direct-Access Cisco UCSC-MRAID12G 4.62 PQ: 0 ANSI: 5 random: fast init done Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015) clocksource: Switched to clocksource tsc iscsi: registered transport (cxgb3i) Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) iscsi: registered transport (cxgb4i) QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) iscsi: registered transport (bnx2i) iscsi: registered transport (be2iscsi) In beiscsi_module_init, tt=ffffffff827cdbc0 sd 0:2:0:0: Attached scsi generic sg0 type 0 sd 0:2:0:0: [sda] 1169920000 512-byte logical blocks: (599 GB/558 GiB) sd 0:2:1:0: [sdb] 466796544 512-byte logical blocks: (239 GB/223 GiB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08 sd 0:2:1:0: [sdb] Write Protect is off sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08 sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA sdb: sdb1 sda: sda1 sda2 sd 0:2:1:0: [sdb] Attached SCSI disk sd 0:2:0:0: [sda] Attached SCSI disk sd 0:2:1:0: Attached scsi generic sg1 type 0 libphy: Fixed MDIO Bus: probed cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10) e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb 0000:01:00.0: added PHC on eth0 igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:01:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 70:69:5a:c9:b8:76 igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) igb 0000:01:00.1: added PHC on eth1 igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:01:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 70:69:5a:c9:b8:77 igb 0000:01:00.1: eth1: PBA No: FFFFFF-0FF igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k igbvf: Copyright (c) 2009 - 2012 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k ixgbe: Copyright (c) 1999-2016 Intel Corporation. ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation. ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI ixgb: Copyright (c) 1999-2008 Intel Corporation. Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.20 Fusion MPT FC Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1a.0: EHCI Host Controller ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.0: debug port 2 ehci-pci 0000:00:1a.0: cache line size of 64 is not supported ehci-pci 0000:00:1a.0: irq 18, io mem 0xc7402000 ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.14.57 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:1d.0: debug port 2 ehci-pci 0000:00:1d.0: cache line size of 64 is not supported ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7401000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 4.14.57 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usb 1-1: new high-speed USB device number 2 using ehci-pci usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic i8042: PNP: No PS/2 controller found. mousedev: PS/2 mouse device common for all mice usb 2-1: new high-speed USB device number 2 using ehci-pci usb 1-1: New USB device found, idVendor=8087, idProduct=800a usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected input: PC Speaker as /devices/platform/pcspkr/input/input2 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs usb 2-1: New USB device found, idVendor=8087, idProduct=8002 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized floppy0: no floppy controllers found IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized power_meter ACPI000D:00: Found ACPI power meter. power_meter ACPI000D:00: Ignoring unsafe software power cap! power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). usb 2-1.3: new high-speed USB device number 3 using ehci-pci power_meter ACPI000D:01: Found ACPI power meter. power_meter ACPI000D:01: Ignoring unsafe software power cap! power_meter ACPI000D:01: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 usb 2-1.3: New USB device found, idVendor=1c79, idProduct=3100 usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.3: Product: PHF16H0CM1-ETG usb 2-1.3: Manufacturer: UNIGEN usb 2-1.3: SerialNumber: 07008243AA8B0099 usb-storage 2-1.3:1.0: USB Mass Storage device detected scsi host1: usb-storage 2-1.3:1.0 usb 2-1.4: new high-speed USB device number 4 using ehci-pci iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS usb 2-1.4: New USB device found, idVendor=0424, idProduct=2512 usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1.4:1.0: USB hub found hub 2-1.4:1.0: 2 ports detected usb 2-1.6: new full-speed USB device number 5 using ehci-pci iTCO_vendor_support: vendor-support=0 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com device-mapper: dm-log-userspace: version 1.3.0 loaded usb 2-1.6: New USB device found, idVendor=0624, idProduct=0402 usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.6: Product: Cisco USB Composite Device-0 usb 2-1.6: Manufacturer: Avocent usb 2-1.6: SerialNumber: 20111102-00000001 usb 2-1.7: new high-speed USB device number 6 using ehci-pci EDAC sbridge: Seeking for: PCI ID 8086:2fa0 EDAC sbridge: Seeking for: PCI ID 8086:2fa0 EDAC sbridge: Seeking for: PCI ID 8086:2fa0 EDAC sbridge: Seeking for: PCI ID 8086:2f60 usb 2-1.7: New USB device found, idVendor=0624, idProduct=0403 usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.7: Product: Cisco USB Composite Device-1 usb 2-1.7: Manufacturer: Avocent usb 2-1.7: SerialNumber: 20111102-00000002 usb-storage 2-1.7:1.0: USB Mass Storage device detected scsi host2: usb-storage 2-1.7:1.0 EDAC sbridge: Seeking for: PCI ID 8086:2f60 EDAC sbridge: Seeking for: PCI ID 8086:2f60 EDAC sbridge: Seeking for: PCI ID 8086:2fa8 EDAC sbridge: Seeking for: PCI ID 8086:2fa8 EDAC sbridge: Seeking for: PCI ID 8086:2fa8 EDAC sbridge: Seeking for: PCI ID 8086:2f71 EDAC sbridge: Seeking for: PCI ID 8086:2f71 EDAC sbridge: Seeking for: PCI ID 8086:2f71 EDAC sbridge: Seeking for: PCI ID 8086:2faa EDAC sbridge: Seeking for: PCI ID 8086:2faa EDAC sbridge: Seeking for: PCI ID 8086:2faa EDAC sbridge: Seeking for: PCI ID 8086:2fab EDAC sbridge: Seeking for: PCI ID 8086:2fab EDAC sbridge: Seeking for: PCI ID 8086:2fab EDAC sbridge: Seeking for: PCI ID 8086:2fac EDAC sbridge: Seeking for: PCI ID 8086:2fad EDAC sbridge: Seeking for: PCI ID 8086:2f68 EDAC sbridge: Seeking for: PCI ID 8086:2f68 EDAC sbridge: Seeking for: PCI ID 8086:2f68 EDAC sbridge: Seeking for: PCI ID 8086:2f79 EDAC sbridge: Seeking for: PCI ID 8086:2f79 EDAC sbridge: Seeking for: PCI ID 8086:2f79 EDAC sbridge: Seeking for: PCI ID 8086:2f6a EDAC sbridge: Seeking for: PCI ID 8086:2f6a EDAC sbridge: Seeking for: PCI ID 8086:2f6a EDAC sbridge: Seeking for: PCI ID 8086:2f6b EDAC sbridge: Seeking for: PCI ID 8086:2f6b EDAC sbridge: Seeking for: PCI ID 8086:2f6b EDAC sbridge: Seeking for: PCI ID 8086:2f6c EDAC sbridge: Seeking for: PCI ID 8086:2f6d EDAC sbridge: Seeking for: PCI ID 8086:2ffc EDAC sbridge: Seeking for: PCI ID 8086:2ffc EDAC sbridge: Seeking for: PCI ID 8086:2ffc EDAC sbridge: Seeking for: PCI ID 8086:2ffd EDAC sbridge: Seeking for: PCI ID 8086:2ffd EDAC sbridge: Seeking for: PCI ID 8086:2ffd scsi 1:0:0:0: Direct-Access UNIGEN PHF16H0CM1-ETG PMAP PQ: 0 ANSI: 6 sd 1:0:0:0: Attached scsi generic sg2 type 0 sd 1:0:0:0: [sdc] 33587200 512-byte logical blocks: (17.2 GB/16.0 GiB) sd 1:0:0:0: [sdc] Write Protect is off sd 1:0:0:0: [sdc] Mode Sense: 2b 00 00 08 sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA EDAC sbridge: Seeking for: PCI ID 8086:2fbd sdc: sdc1 sdc2 sd 1:0:0:0: [sdc] Attached SCSI removable disk EDAC sbridge: Seeking for: PCI ID 8086:2fbd EDAC sbridge: Seeking for: PCI ID 8086:2fbd EDAC sbridge: Seeking for: PCI ID 8086:2fbf EDAC sbridge: Seeking for: PCI ID 8086:2fbf EDAC sbridge: Seeking for: PCI ID 8086:2fbf EDAC sbridge: Seeking for: PCI ID 8086:2fb9 EDAC sbridge: Seeking for: PCI ID 8086:2fb9 EDAC sbridge: Seeking for: PCI ID 8086:2fb9 EDAC sbridge: Seeking for: PCI ID 8086:2fbb EDAC sbridge: Seeking for: PCI ID 8086:2fbb EDAC sbridge: Seeking for: PCI ID 8086:2fbb EDAC sbridge: Couldn't find mci handler EDAC sbridge: Couldn't find mci handler EDAC sbridge: Couldn't find mci handler EDAC sbridge: Couldn't find mci handler EDAC sbridge: Failed to register device with error -22. intel_pstate: Intel P-state driver initializing hidraw: raw HID events driver (C) Jiri Kosina input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0624:0402.0001/input/input3 scsi 2:0:0:0: CD-ROM Cisco vKVM-Mapped vDVD 1.22 PQ: 0 ANSI: 0 scsi 2:0:0:1: Direct-Access Cisco vKVM-Mapped vHDD 1.22 PQ: 0 ANSI: 0 CCS hid-generic 0003:0624:0402.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.6/input0 input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0624:0402.0002/input/input4 hid-generic 0003:0624:0402.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.6/input1 input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:0624:0402.0003/input/input5 hid-generic 0003:0624:0402.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.6/input2 usbcore: registered new interface driver usbhid usbhid: USB HID core driver drop_monitor: Initializing network drop monitor service nf_conntrack version 0.5.0 (65536 buckets, 262144 max) ip_tables: (C) 2000-2006 Netfilter Core Team Initializing XFRM netlink socket NET: Registered protocol family 10 scsi 2:0:0:2: Direct-Access Cisco vKVM-Mapped vFDD 1.22 PQ: 0 ANSI: 0 CCS scsi 2:0:0:3: CD-ROM Cisco CIMC-Mapped vDVD 1.22 PQ: 0 ANSI: 0 Segment Routing with IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 scsi 2:0:0:4: Direct-Access Cisco CIMC-Mapped vHDD 1.22 PQ: 0 ANSI: 0 CCS sr 2:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw caddy cdrom: Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg3 type 5 sd 2:0:0:1: Attached scsi generic sg4 type 0 sd 2:0:0:2: Attached scsi generic sg5 type 0 sr 2:0:0:3: [sr1] scsi3-mmc drive: 0x/0x cd/rw caddy sr 2:0:0:3: Attached scsi CD-ROM sr1 sr 2:0:0:3: Attached scsi generic sg6 type 5 sd 2:0:0:4: Attached scsi generic sg7 type 0 sd 2:0:0:2: [sde] Attached SCSI removable disk sd 2:0:0:1: [sdd] Attached SCSI removable disk sd 2:0:0:4: [sdf] Attached SCSI removable disk NET: Registered protocol family 4 NET: Registered protocol family 5 8021q: 802.1Q VLAN Support v1.8 microcode: sig=0x306f2, pf=0x1, revision=0x3d microcode: Microcode Update Driver: v2.2. AVX2 version of gcm_enc/dec engaged. AES CTR mode by8 optimization enabled sched_clock: Marking stable (16170678153, 0)->(17058223809, -887545656) registered taskstats version 1 ima: Allocated hash algorithm: sha1 rtc_cmos 00:00: setting system clock to 2018-11-07 09:15:47 UTC (1541582147) Freeing unused kernel memory: 2396K Write protecting the kernel read-only data: 22528k Freeing unused kernel memory: 2004K Freeing unused kernel memory: 1520K rodata_test: all tests were successful systemd[1]: Inserted module 'autofs4' random: systemd: uninitialized urandom read (16 bytes read) random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Mounting cgroup to /sys/fs/cgroup/perf_event of type cgroup with options perf_event. systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory. systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset. systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio. systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer. systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices. systemd[1]: Mounting cgroup to /sys/fs/cgroup/pids of type cgroup with options pids. systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct. systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls. systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) Welcome to CentOS Linux 7 (Core) dracut-033-360.el7_2.1 (Initramfs)! random: systemd: uninitialized urandom read (16 bytes read) systemd-fstab-generator[212]: Could not find a root= entry on the kernel command line. systemd-fstab-generator[212]: Parsing /etc/fstab systemd-fstab-generator[212]: Parsing /sysroot/etc/fstab [ OK ] Reached target Local File Systems. [ OK ] Reached target Swap. [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Timers. [ OK ] Created slice -.slice. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Journal Socket. [ OK ] Created slice System Slice. [ OK ] Reached target Slices. Startinsystemd-journald[226]: Fixed max_use=3.1G max_size=128.0M min_size=4.0M keep_free=4.0G g Journal Servicsystemd-journald[226]: Reserving 233016 entries in hash table. e... Startinsystemd-journald[226]: Vacuuming... g Create list ofsystemd-journald[226]: Vacuuming done, freed 0B of archived journals on disk. required st... systemd-journald[226]: Flushing /dev/kmsg... nodes for the cusystemd-journald[226]: no db file to read /run/udev/data/+acpi:PNP0A03:02: No such file or directory systemd-journald[226]: no db file to read /run/udev/data/+acpi:PNP0A03:02: No such file or directory systemd-journald[226]: no db file to read /run/udev/data/+acpi:PNP0A03:02: No such file or directory Startinsystemd-journald[226]: no db file to read /run/udev/data/+pci_bus:0000:ff: No such file or directory g dracut cmdlinesystemd-journald[226]: no db file to read /run/udev/data/+pci:0000:ff:08.0: No such file or directory hook... Starting Setup Virtual Console... Starting Apply Kernel Variables... [ OK BIOS EDD facility v0.16 2004-Jun-25, 5 devices found ] Listening on udev Control Socket. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. [ OK ] Started Apply Kernel Variables. Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... alua: device handler registered emc: device handler registered hp_sw: device handler registered rdac: device handler registered No iBFT detected. raid6: sse2x1 gen() 5546 MB/s raid6: sse2x1 xor() 4716 MB/s raid6: sse2x2 gen() 8003 MB/s raid6: sse2x2 xor() 5175 MB/s raid6: sse2x4 gen() 9437 MB/s raid6: sse2x4 xor() 5826 MB/s raid6: avx2x1 gen() 13066 MB/s raid6: avx2x1 xor() 8865 MB/s raid6: avx2x2 gen() 15292 MB/s raid6: avx2x2 xor() 9277 MB/s raid6: avx2x4 gen() 17449 MB/s raid6: avx2x4 xor() 10728 MB/s raid6: using algorithm avx2x4 gen() 17449 MB/s raid6: .... xor() 10728 MB/s, rmw enabled raid6: using avx2x2 recovery algorithm xor: automatically using best checksumming function avx async_tx: api initialized (async) device-mapper: multipath round-robin: version 1.2.0 loaded [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting dracut pre-trigger hook... dracut-pre-trigger[559]: calling: control dracut-pre-trigger[559]: calling: control dracut-pre-trigger[559]: calling: control dracut-pre-trigger[559]: calling: control dracut-pre-trigger[559]: calling: control dracut-pre-trigger[559]: /tmp/dd_disk file was not created [ OK ] Started dracut pre-trigger hook. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. Starting Device-Mapper Multipath Device Controller... [ OK ] Reached target System Initialization. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Reached target Sockets. Starting Show Plymouth Boot Screen... [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. [ OK ] Started Device-Mapper Multipath Device Controller. Starting Open-iSCSI... ipmi message handler version 39.2 ipmi device interface ipmi_si: probing via SMBIOS ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 ipmi_si: Adding SMBIOS-specified kcs state machine ipmi_si IPI0001:00: ipmi_si: probing via ACPI ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI ipmi_si: Adding ACPI-specified kcs state machine IPMI System Interface driver. ipmi_si: probing via SPMI ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 (NULL device *): SPMI-specified kcs state machine: duplicate ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi_si IPI0001:00: Found new BMC (man_id: 0x00168b, prod_id: 0x0015, dev_id: 0x20) ipmi_si IPI0001:00: IPMI kcs interface initialized shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ahci 0000:00:11.4: version 3.0 ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode igb 0000:01:00.0 enp1s0f0: renamed from eth0 ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst scsi host3: ahci igb 0000:01:00.1 enp1s0f1: renamed from eth1 scsi host4: ahci scsi host5: ahci scsi host6: ahci ata1: SATA max UDMA/133 abar m2048@0xc7404000 port 0xc7404100 irq 69 enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.42 ata2: SATA max UDMA/133 abar m2048@0xc7404000 port 0xc7404180 irq 69 ata3: SATA max UDMA/133 abar m2048@0xc7404000 port 0xc7404200 irq 69 ata4: SATA max UDMA/133 abar m2048@0xc7404000 port 0xc7404280 irq 69 enic 0000:0b:00.0: vNIC MAC addr 70:79:b3:09:1f:40 wq/rq 256/512 mtu 1500 enic 0000:0b:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss yes intr mode any type min timer 125 usec loopback tag 0x0000 enic 0000:0b:00.0: vNIC resources avail: wq 1 rq 4 cq 5 intr 8 enic 0000:0b:00.0: vNIC resources used: wq 1 rq 4 cq 5 intr 7 intr mode MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst enic 0000:0c:00.0: vNIC MAC addr 70:79:b3:09:1f:41 wq/rq 256/512 mtu 1500 enic 0000:0c:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss yes intr mode any type min timer 125 usec loopback tag 0x0000 enic 0000:0c:00.0: vNIC resources avail: wq 1 rq 4 cq 5 intr 8 random: crng init done enic 0000:0c:00.0: vNIC resources used: wq 1 rq 4 cq 5 intr 7 intr mode MSI-X scsi host7: ahci scsi host8: ahci scsi host9: ahci scsi host10: ahci scsi host11: ahci scsi host12: ahci ata5: SATA max UDMA/133 abar m2048@0xc7400000 port 0xc7400100 irq 78 ata6: SATA max UDMA/133 abar m2048@0xc7400000 port 0xc7400180 irq 78 ata7: SATA max UDMA/133 abar m2048@0xc7400000 port 0xc7400200 irq 78 ata8: SATA max UDMA/133 abar m2048@0xc7400000 port 0xc7400280 irq 78 ata9: SATA max UDMA/133 abar m2048@0xc7400000 port 0xc7400300 irq 78 ata10: SATA max UDMA/133 abar m2048@0xc7400000 port 0xc7400380 irq 78 ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) random: 7 urandom warning(s) missed due to ratelimiting ata7: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata9: SATA link down (SStatus 0 SControl 300) ata10: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) Genic 0000:0b:00.0 enp11s0: renamed from eth0 enic 0000:0c:00.0 enp12s0: renamed from eth1 [ OK ] Started Open-iSCSI. systemd[1]: ConditionPathExistsGlob=|/lib/dracut/hooks/initqueue/online/*.sh succeeded for dracut-initqueue.service. Starting dracut initqueue hook... dracut-initqueue[804]: calling: settle dracut-initqueuesystemd-fstab-generator[819]: Could not find a root= entry on the kernel command line. [804]: Got unexpsystemd-fstab-generator[819]: Parsing /etc/fstab ected auxiliary systemd-fstab-generator[819]: Parsing /sysroot/etc/fstab data with level=systemd[1]: Looking for SysV rcN.d links in: 1 and type=2 dsystemd[1]: /etc/rc.d racut-initqueue[systemd[1]: Unit type .busname is not supported on this system. 804]: Sent messasystemd[1]: Failed to load configuration for lvm2-pvscan@8:2.service: No such file or directory ge type=method_csystemd[1]: Failed to load configuration for lvm2-pvscan@8:17.service: No such file or directory all sender=n/a dsystemd[1]: Failed to load configuration for sys-fs-fuse-connections.mount: No such file or directory estination=org.fsystemd[1]: Failed to load configuration for syslog.service: No such file or directory reedesktop.systesystemd[1]: Failed to load configuration for systemd-sysusers.service: No such file or directory md1 object=/org/systemd[1]: Failed to load configuration for network-pre.target: No such file or directory freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=Reload cookie=1 reply_cookie=0 error=n/a dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: GotISO 9660 Extensions: Microsoft Joliet Level 3 unexpected auxiliary data with level=1 and typeISO 9660 Extensions: RRIP_1991A =2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 . this message comes about 400 times. . dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpesystemd-fstab-generator[991]: Could not find a root= entry on the kernel command line. cted auxiliary dsystemd-fstab-generator[991]: Parsing /etc/fstab ata with level=1systemd-fstab-generator[991]: Parsing /sysroot/etc/fstab and type=2 dracut-initqueue[804]: Got unexpected auxiliary dasystemd[1]: dev-disk-by\x2did-lvm\x2dpv\x2duuid\x2dSKbluU\x2dQuKV\x2dZmVE\x2dpN0o\x2dy8SQ\x2doYtv\x2dSnsuA5.device changed dead -> plugged ta with level=1 systemd[1]: systemd-udevd.service changed dead -> running and type=2 drasystemd[1]: sys-subsystem-net-devices-enp12s0.device changed dead -> plugged cut-initqueue[80systemd[1]: swap.target changed dead -> active 4]: Got unexpectsystemd[1]: dev-disk-by\x2did-scsi\x2d3670708bff88cf12022771e05201b768d.device changed dead -> plugged ed auxiliary datsystemd[1]: sys-devices-virtual-block-dm\x2d0.device changed dead -> plugged a with level=1 asystemd[1]: dev-disk-by\x2dpath-pci\x2d0000:00:1d.0\x2dusb\x2d0:1.3:1.0\x2dscsi\x2d0:0:0:0\x2dpart1.device changed dead -> plugged nd type=2 dracsystemd[1]: system.slice changed dead -> active ut-initqueue[804systemd[1]: sys-subsystem-net-devices-enp1s0f1.device changed dead -> plugged ]: Got unexpectesystemd[1]: sys-devices-virtual-block-nbd14.device changed dead -> plugged d auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracutEXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) -initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 . This message comes about 200 times... dracut-initqueue[804]: Got unexpected auxiliary data with level=1 and type=2 dracut-initqueue[804]: mount: /dev/sr1 is write-protected, mounting read-only dracut-initqueue[804]: calling: settle [ OK ] Started dracut initqueue hook. Starting dracut pre-mount hook... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Started dracut pre-mount hook. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. Starting dracut mount hook... [ OK ] Started dracut mount hook. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... dracut-pre-pivot[1034]: calling: settle dracut-pre-pivot[1034]: calling: settle dracut-pre-pivot[1034]: calling: settle [ OK ] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped target Timers. Starting Plymouth switch root service... [ OK ] Stopped Cleaning Up and Shutting Down Daemons. [ OK ] Stopped dracut pre-pivot and cleanup hook. Stopping dracut pre-pivot and cleanup hook... [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped dracut mount hook. Stopping dracut mount hook... [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped target Slices. [ OK ] Stopped target Sockets. [ OK ] Closed Open-iSCSI iscsiuio Socket. [ OK ] Stopped target Systemsystemd-journald[226]: Received SIGTERM from PID 1 (systemd). Initialization.systemd-journald[226]: systemd-journald stopped as pid 226 [ OK ystemd-journal: 561 output lines suppressed due to ratelimiting [0m] Stopped target Swap. [ OK ] Stopped Apply Kernel Variables. Stopping Apply Kernel Variables... [ OK ] Stopped target Local File Systems. [ OK ] Stopped dracut pre-mount hook. Stopping dracut pre-mount hook... [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped dracut initqueue hook. Stopping dracut initqueue hook... Stopping Open-iSCSI... [ OK ] Stopped Open-iSCSI. Stopping Device-Mapper Multipath Device Controller... [ OK ] Stopped Device-Mapper Multipath Device Controller. [ OK ] Stopped udev Coldplug all Devices. Stopping udev Coldplug all Devices... [ OK ] Stopped dracut pre-trigger hook. Stopping dracut pre-trigger hook... Stopping udev Kernel Device Manager... [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped Create Static Device Nodes in /dev. Stopping Create Static Device Nodes in /dev... [ OK ] Stopped Create list of required sta...ce nodes for the current kernel. Stopping Create list of required st... nodes for the current kernel... [ OK ] Stopped dracut pre-udev hook. Stopping dracut pre-udev hook... [ OK ] Stopped dracut cmdline hook. Stopping dracut cmdline hook... [ OK ] Closed udev Kernel Socket. [ OK ] Closed udev Control Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup udevd DB. [ OK ] Reached target Switch Root. [ OK ] Started Plymouth switch root service. Starting Switch Root... systemd: 231 output lines suppressed due to ratelimiting SELinux: 32768 avtab hash slots, 112414 rules. SELinux: 32768 avtab hash slots, 112414 rules. SELinux: 8 users, 105 roles, 4955 types, 303 bools, 1 sens, 1024 cats SELinux: 83 classes, 112414 rules SELinux: Permission validate_trans in class security not defined in policy. SELinux: Permission getrlimit in class process not defined in policy. SELinux: Class process2 not defined in policy. SELinux: Permission module_load in class system not defined in policy. SELinux: Permission map in class file not defined in policy. SELinux: Permission map in class dir not defined in policy. SELinux: Permission map in class lnk_file not defined in policy. SELinux: Permission map in class chr_file not defined in policy. SELinux: Permission map in class blk_file not defined in policy. SELinux: Permission map in class sock_file not defined in policy. SELinux: Permission map in class fifo_file not defined in policy. SELinux: Permission map in class socket not defined in policy. SELinux: Permission map in class tcp_socket not defined in policy. SELinux: Permission map in class udp_socket not defined in policy. SELinux: Permission map in class rawip_socket not defined in policy. SELinux: Permission map in class netlink_socket not defined in policy. SELinux: Permission map in class packet_socket not defined in policy. SELinux: Permission map in class key_socket not defined in policy. SELinux: Permission map in class unix_stream_socket not defined in policy. SELinux: Permission map in class unix_dgram_socket not defined in policy. SELinux: Permission map in class netlink_route_socket not defined in policy. SELinux: Permission map in class netlink_tcpdiag_socket not defined in policy. SELinux: Permission map in class netlink_nflog_socket not defined in policy. SELinux: Permission map in class netlink_xfrm_socket not defined in policy. SELinux: Permission map in class netlink_selinux_socket not defined in policy. SELinux: Class netlink_iscsi_socket not defined in policy. SELinux: Permission map in class netlink_audit_socket not defined in policy. SELinux: Class netlink_fib_lookup_socket not defined in policy. SELinux: Class netlink_connector_socket not defined in policy. SELinux: Class netlink_netfilter_socket not defined in policy. SELinux: Permission map in class netlink_dnrt_socket not defined in policy. SELinux: Permission map in class netlink_kobject_uevent_socket not defined in policy. SELinux: Class netlink_generic_socket not defined in policy. SELinux: Class netlink_scsitransport_socket not defined in policy. SELinux: Class netlink_rdma_socket not defined in policy. SELinux: Class netlink_crypto_socket not defined in policy. SELinux: Permission map in class appletalk_socket not defined in policy. SELinux: Permission map in class dccp_socket not defined in policy. SELinux: Permission audit_read in class capability2 not defined in policy. SELinux: Permission map in class tun_socket not defined in policy. SELinux: Class binder not defined in policy. SELinux: Class cap_userns not defined in policy. SELinux: Class cap2_userns not defined in policy. SELinux: Class sctp_socket not defined in policy. SELinux: Class icmp_socket not defined in policy. SELinux: Class ax25_socket not defined in policy. SELinux: Class ipx_socket not defined in policy. SELinux: Class netrom_socket not defined in policy. SELinux: Class atmpvc_socket not defined in policy. SELinux: Class x25_socket not defined in policy. SELinux: Class rose_socket not defined in policy. SELinux: Class decnet_socket not defined in policy. SELinux: Class atmsvc_socket not defined in policy. SELinux: Class rds_socket not defined in policy. SELinux: Class irda_socket not defined in policy. SELinux: Class pppox_socket not defined in policy. SELinux: Class llc_socket not defined in policy. SELinux: Class can_socket not defined in policy. SELinux: Class tipc_socket not defined in policy. SELinux: Class bluetooth_socket not defined in policy. SELinux: Class iucv_socket not defined in policy. SELinux: Class rxrpc_socket not defined in policy. SELinux: Class isdn_socket not defined in policy. SELinux: Class phonet_socket not defined in policy. SELinux: Class ieee802154_socket not defined in policy. SELinux: Class caif_socket not defined in policy. SELinux: Class alg_socket not defined in policy. SELinux: Class nfc_socket not defined in policy. SELinux: Class vsock_socket not defined in policy. SELinux: Class kcm_socket not defined in policy. SELinux: Class qipcrtr_socket not defined in policy. SELinux: Class smc_socket not defined in policy. SELinux: Class infiniband_pkey not defined in policy. SELinux: Class infiniband_endport not defined in policy. SELinux: the above unknown classes and permissions will be allowed SELinux: policy capability network_peer_controls=1 SELinux: policy capability open_perms=1 SELinux: policy capability extended_socket_class=0 SELinux: policy capability always_check_network=0 SELinux: policy capability cgroup_seclabel=0 SELinux: policy capability nnp_nosuid_transition=0 SELinux: Completing initialization. SELinux: Setting up existing superblocks. audit: type=1403 audit(1541582180.608:2): policy loaded auid=4294967295 ses=4294967295 systemd[1]: Successfully loaded SELinux policy in 3.483466s. systemd[1]: Relabelled /dev and /run in 43.155ms. Welcome to CentOS Linux 7 (Core)! systemd[1093]: Spawned /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator as 1099. systemd[1093]: Spawned /usr/lib/systemd/system-generators/lvm2-activation-generator as 1100. systemd[1093]: Spawned /usr/lib/systemd/system-generators/systemd-rc-local-generator as 1101. systemd[1093]: Spawned /usr/lib/systemd/system-generators/kdump-dep-generator.sh as 1102. systemd[1093]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 1103. systemd[1093]: Spawned /usr/lib/systemd/system-generators/anaconda-generator as 1104. systemd[1093]: Spawned /usr/lib/systemd/system-generators/systemd-sysv-generator as 1105. systemd-efi-boot-generator[1095]: Not an EFI boot, exiting. systemd-fstab-generator[1097]: Parsing /etc/fstab systemd-getty-generator[1094]: Automatically adding serial getty for /dev/ttyS0. systemd-sysv-generator[1105]: Looking for unit files in (higher priority first): systemd[1093]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded. systemd-sysv-generator[1105]: /etc/systemd/system systemd-sysv-generator[1105]: /run/systemd/system systemd-sysv-generator[1105]: /usr/local/lib/systemd/system systemd-sysv-generator[1105]: /usr/lib/systemd/system systemd-sysv-generator[1105]: Looking for SysV init scripts in: systemd-sysv-generator[1105]: /etc/rc.d/init.d systemd-sysv-generator[1105]: Looking for SysV rcN.d links in: systemd-sysv-generator[1105]: /etc/rc.d systemd-sysv-generator[1105]: Loading SysV script /etc/rc.d/init.d/network systemd-sysv-ge: 1 output lines suppressed due to ratelimiting systemd[1093]: /usr/lib/systemd/system-generators/systemd-sysv-generator succeeded. systemd[1093]: /usr/lib/systemd/system-generators/kdump-dep-generator.sh succeeded. systemd: 9 output lines suppressed due to ratelimiting systemd[1]: system-generators succeeded. systemd[1]: Looking for unit files in (higher priority first): systemd[1]: /etc/systemd/system systemd[1]: /run/systemd/system systemd[1]: /run/systemd/generator systemd[1]: /usr/local/lib/systemd/system systemd[1]: /usr/lib/systemd/system systemd[1]: /run/systemd/generator.late systemd[1]: Looking for SysV init scripts in: systemd[1]: /etc/rc.d/init.d [ OK ] Stopped Switch Root. [ OK ] Reached target Timers. [ OK ] Created slice User and Session Slice. [ OK ] Created slice system-anaconda\x2dtmux.slice. [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Reached target Swap. Mounting POSIX Message Queue File System... [ OK ] Reached target Paths. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. [ OK ] Listening on udev Control Socket. [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd File Systems. [ OK ] Listening on LVM2 metadata daemon socket. Starting Apply Kernel Variables... Mounting FUSE Control File System... Starting Create list of required st... nodes for the current kernel... [ OK ] Stopped target Initrd Root File System. systemd[1]: About to execute: /bin/mount tmpfs /tmp -n -t tmpfs -o mode=1777,strictatime systemd[1]: Forked /bin/mount as 1115 systemd[1]: tmp.mount changed dead -> mounting systemd[1]: Mounting Temporary Directory... Mountinsystemd[1]: systemd-initctl.socket changed dead -> listening g Temporary Diresystemd[1]: Job systemd-initctl.socket/start finished, result=done ctory... systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK systemd[1]: Starting /dev/initctl Compatibility Named Pipe. ] Listening on /systemd[1]: ConditionCapability=CAP_SYS_RAWIO succeeded for sys-kernel-debug.mount. dev/initctl Compsystemd[1]: ConditionPathExists=/sys/kernel/debug succeeded for sys-kernel-debug.mount. atibility Named Pipe. Mounting Debug File System... [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Slices. [ OK ] Stopped Flush Journal to Persistent Storage. Starting Remount Root and Kernel File Systems... [ OK ] Stopped Journal Service. Starting Journal Service... Mounting Huge Pages File System... [* ] (5 of 9) A start job is running for...eue File System (13s / 1min 30s)systemd[1]: Received SIGCHLD from PID 1117 (systemd-remount). systemd[1]: Child 1117 (systemd-remount) died (code=exited, status=0/SUCCESS) systemd[1]: Child 1117 belongs to systemd-remount-fs.service systemd[1]: systemd-remount-fs.service: main process exited, code=exited, status=0/SUCCESS systemd[1]: systemd-remount-fs.service changed start -> exited systemd[1]: Job systemd-remount-fs.service/start finished, result=done systemd[1]: Started Remount Root and Kernel File Systems. [ OK systemd[1]: systemd-remount-fs.service: cgroup is empty ] Started Resystemd[1]: ConditionFirstBoot=yes failed for systemd-firstboot.service. mount Root and Ksystemd[1]: Starting of systemd-firstboot.service requested but condition failed. Not starting unit. ernel File Systems. Starting Rebuild Hardware Database... Starting Load/Save Random Seed... Starting Configure read-only root support... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... systemd-journald[1118]: Fixed max_use=3.1G max_size=128.0M min_size=4.0M keep_free=4.0G systemd-journald[1118]: Reserving 233016 entries in hash table. systemd-journald[1118]: Vacuuming... systemd-journald[1118]: Vacuuming done, freed 0B of archived journals on disk. systemd-journald[1118]: Flushing /dev/kmsg... systemd-journald[1118]: systemd-journald running as pid 1118 [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Configure read-only root support. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Started udev Kernel Device Manager. [ OK ] Started Rebuild Hardware Database. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... Starting Device-Mapper Multipath Device Controller... Starting Initialize the iWARP/InfiniBand/RDMA stack in the kernel... [ OK ] Created slice system-lvm2\x2dpvscan.slice. Starting LVM2 PV scan on device 8:17... Starting LVM2 PV scan on device 8:2... [ OK ] Started udev Wait for Complete Device Initialization. Starting Activation of DM RAID sets... [ OK ] Started Device-Mapper Multipath Device Controller. [ OK ] Started Activation of DM RAID sets. [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Import network configuration from initramfs... Starting Tell Plymouth To Write Out Runtime Data... [ OK ] Reached target Encrypted Volumes. [ OK ] Started LVM2 metadata daemon. Starting LVM2 metadata daemon... Mounting Configuration File System... [ OK ] Mounted Configuration File System. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Rebuild Journal Catalog. Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Started LVM2 PV scan on device 8:17. [ OK ] Started LVM2 PV scan on device 8:2. [ OK ] Started Import network configuration from initramfs. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Terminate Plymouth Boot Screen... Starting Dump dmesg to /var/log/dmesg... Starting System Logging Service... Starting Login Service... Starting Service enabling compressing RAM with zRam... [ OK ] Started Anaconda NetworkManager configuration. Starting Anaconda NetworkManager configuration... Starting firewalld - dynamic firewall daemon... [ OK ] Started anaconda performance monitor. Starting anaconda performance monitor... Starting Wait for Plymouth Boot Screen to Quit... ++ grep /run/install/repo ++ cut -f 1 -d ' ' ++ tr -d '[:digit:]' + usbdevice=/dev/sr + mkdir /mnt/usbdata + mount /dev/sr2 /mnt/usbdata mount: special device /dev/sr2 does not exist + true + '[' -f /mnt/usbdata/ifabric.iso ']' + mountpoint -q /mnt/usbdata + true + echo 'INFO: found second partition on install media but did not find ifabric.iso. ' INFO: found second partition on install media but did not find ifabric.iso. + echo 'Continuing on to ISO URL prompt.' Continuing on to ISO URL prompt. + '[' 0 -eq 0 ']' + read_iso_url + true + echo 'To speed up the install, enter iso url in next ten minutes: ' To speed up the install, enter iso url in next ten minutes: + read -t 600 -p '? ' url ? [anaconda] 1:main* 2:shell 3:log 4:storage-log 5:program-log [anaconda] 1:main* 2:shell 3:log 4:storage-log 5:program-log ++ awk -F '/|:' '{print $4}' + urlip= + '[' -z '' ']' + break + '[' -n '' ']' + echo 'Mounting ISO from /dev/cdrom or /dev/sr1' Mounting ISO from /dev/cdrom or /dev/sr1 + mount /dev/cdrom /cdrom mount: /dev/sr0 is write-protected, mounting read-only + mountpoint -q /cdrom + install_from_cdrom_and_poweroff + cp /cdrom/umoci /usr/bin + cp /cdrom/atomix /usr/bin + cp /cdrom/do_partitioning /usr/bin + chmod ugo+x /usr/bin/umoci /usr/bin/atomix + chmod ugo+x /usr/bin/do_partitioning + echo 'Partitioning the disks and installing the system' Partitioning the disks and installing the system + wipearg=--wipe-disks + '[' 0 = 1 ']' + annotate-output /usr/bin/do_partitioning --wipe-disks + tee -a /installer.out 09:18:01 I: Started /usr/bin/do_partitioning --wipe-disks 09:18:01 E: + echo 'Are we installing in insecure mode?' 09:18:01 O: Are we installing in insecure mode? 09:18:01 E: + INSECURE_MODE=false 09:18:01 O: INSECURE_MODE is false 09:18:01 E: + set +e 09:18:01 E: + '[' '!' -e /sys/class/tpm/tpm0/device/caps ']' 09:18:01 O: Looking for disk to use 09:18:01 E: + set -e 09:18:01 E: + echo 'INSECURE_MODE is false' 09:18:01 E: + echo 'Looking for disk to use' 09:18:01 E: ++ getopt -o hc:l -l help,wipe-thinpool,wipe-disks,skip-grub,cdrom: == --wipe-disks 09:18:01 E: + options=' --wipe-disks -- '''=='''' 09:18:01 E: + cdrom=/cdrom 09:18:01 E: + wipethinpool=0 09:18:01 E: + wipedisks=0 09:18:01 E: + skipgrub=0 09:18:01 E: + eval set -- ' --wipe-disks -- '''=='''' 09:18:01 E: ++ set -- --wipe-disks -- == 09:18:01 E: + : 09:18:01 E: + case "$1" in 09:18:01 E: + wipedisks=1 09:18:01 E: + shift 1 09:18:01 E: + : 09:18:01 E: + case "$1" in 09:18:01 E: + break 09:18:01 E: ++ mktemp /tmp/XXXXXXXX 09:18:01 E: + export LUKS_CLEARTEXT_FILE=/tmp/fEHx1tMR 09:18:01 E: + LUKS_CLEARTEXT_FILE=/tmp/fEHx1tMR 09:18:01 E: + export LUKS_PASSPHRASE_SIZE=40 09:18:01 E: + LUKS_PASSPHRASE_SIZE=40 09:18:01 E: + export keyfile=/tmp/lkf 09:18:01 E: + keyfile=/tmp/lkf 09:18:01 E: + trap cleanup EXIT 09:18:01 E: + tar zxf /cdrom/tpm2.tgz -C / 09:18:02 E: + tar zxf /cdrom/tpm1.2.tgz -C / 09:18:02 E: + '[' 1 -eq 1 ']' 09:18:02 O: Clearing all LVs and partitions off of all non-removable disks 09:18:02 O: Clearing all known LVs 09:18:02 E: + echo 'Clearing all LVs and partitions off of all non-removable disks' 09:18:02 E: + echo 'Clearing all known LVs' 09:18:02 E: ++ lvm pvs --noheading -o pv_name 09:18:02 E: + for PV in '$(lvm pvs --noheading -o pv_name)' 09:18:02 O: finding all vgs in /dev/sda2 09:18:02 E: + echo 'finding all vgs in /dev/sda2' 09:18:02 E: ++ lvm vgs --noheading -o vg_name -S pv_name=/dev/sda2 09:18:02 O: finding all lvs in vg_ifc0 09:18:02 E: + for VG in '$(lvm vgs --noheading -o vg_name -S "pv_name=$PV")' 09:18:02 E: + echo 'finding all lvs in vg_ifc0' 09:18:02 E: ++ lvm lvs --noheading -o lv_name -S vg_name=vg_ifc0 09:18:02 E: + echo 'removing VG vg_ifc0' 09:18:02 O: removing VG vg_ifc0 09:18:02 E: + lvm vgchange -an vg_ifc0 09:18:02 O: 0 logical volume(s) in volume group "vg_ifc0" now active 09:18:02 E: + lvm vgremove -ff vg_ifc0 09:18:02 O: Volume group "vg_ifc0" successfully removed 09:18:02 E: + echo 'removing PV /dev/sda2' 09:18:02 O: removing PV /dev/sda2 09:18:02 E: + lvm pvremove -ff /dev/sda2 09:18:02 O: Labels on physical volume "/dev/sda2" successfully wiped 09:18:02 E: + for PV in '$(lvm pvs --noheading -o pv_name)' 09:18:02 O: finding all vgs in /dev/sdb1 09:18:02 E: + echo 'finding all vgs in /dev/sdb1' 09:18:02 E: ++ lvm vgs --noheading -o vg_name -S pv_name=/dev/sdb1 09:18:02 O: finding all lvs in vg_ifc0_ssd 09:18:02 E: + for VG in '$(lvm vgs --noheading -o vg_name -S "pv_name=$PV")' 09:18:02 E: + echo 'finding all lvs in vg_ifc0_ssd' 09:18:02 E: ++ lvm lvs --noheading -o lv_name -S vg_name=vg_ifc0_ssd 09:18:02 E: + echo 'removing VG vg_ifc0_ssd' 09:18:02 O: removing VG vg_ifc0_ssd 09:18:02 E: + lvm vgchange -an vg_ifc0_ssd 09:18:02 O: 0 logical volume(s) in volume group "vg_ifc0_ssd" now active 09:18:02 E: + lvm vgremove -ff vg_ifc0_ssd 09:18:02 O: removing VG vg_ifc0 09:18:02 E: + lvm vgchange -an vg_ifc0 09:18:02 O: 0 logical volume(s) in volume group "vg_ifc0" now active 09:18:02 E: + lvm vgremove -ff vg_ifc0 09:18:02 O: Volume group "vg_ifc0" successfully removed 09:18:02 E: + echo 'removing PV /dev/sda2' 09:18:02 O: removing PV /dev/sda2 09:18:02 E: + lvm pvremove -ff /dev/sda2 09:18:02 O: Labels on physical volume "/dev/sda2" successfully wiped 09:18:02 E: + for PV in '$(lvm pvs --noheading -o pv_name)' 09:18:02 O: finding all vgs in /dev/sdb1 09:18:02 E: + echo 'finding all vgs in /dev/sdb1' 09:18:02 E: ++ lvm vgs --noheading -o vg_name -S pv_name=/dev/sdb1 09:18:02 O: finding all lvs in vg_ifc0_ssd 09:18:02 E: + for VG in '$(lvm vgs --noheading -o vg_name -S "pv_name=$PV")' 09:18:02 E: + echo 'finding all lvs in vg_ifc0_ssd' 09:18:02 E: ++ lvm lvs --noheading -o lv_name -S vg_name=vg_ifc0_ssd 09:18:02 E: + echo 'removing VG vg_ifc0_ssd' 09:18:02 O: removing VG vg_ifc0_ssd 09:18:02 E: + lvm vgchange -an vg_ifc0_ssd 09:18:02 O: 0 logical volume(s) in volume group "vg_ifc0_ssd" now active 09:18:02 E: + lvm vgremove -ff vg_ifc0_ssd 09:18:02 O: Volume group "vg_ifc0_ssd" successfully removed 09:18:02 E: + echo 'removing PV /dev/sdb1' 09:18:02 O: removing PV /dev/sdb1 09:18:02 E: + lvm pvremove -ff /dev/sdb1 09:18:03 O: Labels on physical volume "/dev/sdb1" successfully wiped 09:18:03 O: rescanning PVs to empty cache 09:18:03 E: + echo 'rescanning PVs to empty cache' 09:18:03 E: + lvm pvscan --cache 09:18:03 E: ++ mount 09:18:03 E: ++ grep /run/install/repo 09:18:03 E: ++ cut -f 1 -d ' ' 09:18:03 E: ++ tr -d '[:digit:]' 09:18:03 E: + usbinstalldev=/dev/sr 09:18:03 O: Writing zeros to the start and end of all partitions on any non-removable media found in this list: sda sdb sdc sdd sde sdf hda hdb vda vdb vdc vdd 09:18:03 E: + DISKS='sda sdb sdc sdd sde sdf hda hdb vda vdb vdc vdd' 09:18:03 E: + echo 'Writing zeros to the start and end of all partitions on any non-removable media found in this list: sda sdb sdc sdd sde sdf hda hdb vda vdb vdc vdd' 09:18:03 E: + for DEV in '$DISKS' 09:18:03 E: + '[' -d /sys/block/sda ']' 09:18:03 E: + REMOVABLE=0 09:18:03 E: + (( 0 == 1 )) 09:18:03 E: + '[' /dev/sr = /dev/sda ']' 09:18:03 E: ++ sort -r 09:18:03 E: ++ ls /dev/sda /dev/sda1 /dev/sda2 09:18:03 E: + for DEVPART in '$(ls /dev/${DEV}* | sort -r)' 09:18:03 E: ++ blockdev --getsz /dev/sda2 09:18:03 E: + sectors=1159668090 09:18:03 E: + mb=566244 09:18:03 E: + dd if=/dev/zero of=/dev/sda2 bs=1M count=8192 09:18:59 E: 8192+0 records in 09:18:59 E: 8192+0 records out 09:18:59 E: 8589934592 bytes (8.6 GB) copied, 55.9072 s, 154 MB/s 09:18:59 E: + '[' 566244 -gt 8192 ']' 09:18:59 E: + dd if=/dev/zero of=/dev/sda2 bs=1M count=8192 seek=558052 09:20:17 E: 8192+0 records in 09:20:17 E: 8192+0 records out 09:20:17 E: 8589934592 bytes (8.6 GB) copied, 77.846 s, 110 MB/s 09:20:17 E: + for DEVPART in '$(ls /dev/${DEV}* | sort -r)' 09:20:17 E: ++ blockdev --getsz /dev/sda1 09:20:17 E: + sectors=10249407 09:20:17 E: + mb=5004 09:20:17 E: + dd if=/dev/zero of=/dev/sda1 bs=1M count=8192 09:20:21 E: dd: error writing ‘/dev/sda1’: No space left on device 09:20:59 E: 5005+0 records in 09:20:59 E: 5004+0 records out 09:20:59 E: 5247696384 bytes (5.2 GB) copied, 42.816 s, 123 MB/s 09:20:59 E: + true 09:20:59 E: + '[' 5004 -gt 8192 ']' 09:20:59 E: + for DEVPART in '$(ls /dev/${DEV}* | sort -r)' 09:20:59 E: ++ blockdev --getsz /dev/sda 09:20:59 E: + sectors=1169920000 09:20:59 E: + mb=571250 09:20:59 E: + dd if=/dev/zero of=/dev/sda bs=1M count=8192 09:21:54 E: 8192+0 records in 09:21:54 E: 8192+0 records out 09:21:54 E: 8589934592 bytes (8.6 GB) copied, 54.1887 s, 159 MB/s 09:21:54 E: + '[' 571250 -gt 8192 ']' 09:21:54 E: + dd if=/dev/zero of=/dev/sda bs=1M count=8192 seek=563058 09:23:09 E: 8192+0 records in 09:23:09 E: 8192+0 records out 09:23:09 E: 8589934592 bytes (8.6 GB) copied, 75.3028 s, 114 MB/s 09:23:09 E: + sync 09:23:09 E: + flock -s /dev/sda partprobe /dev/sda 09:23:10 E: + sync 09:23:10 E: + for DEV in '$DISKS' 09:23:10 E: + '[' -d /sys/block/sdb ']' 09:23:10 E: + REMOVABLE=0 09:23:10 E: + (( 0 == 1 )) 09:23:10 E: + '[' /dev/sr = /dev/sdb ']' 09:23:10 E: ++ sort -r 09:23:10 E: ++ ls /dev/sdb /dev/sdb1 09:23:10 E: + for DEVPART in '$(ls /dev/${DEV}* | sort -r)' 09:23:10 E: ++ blockdev --getsz /dev/sdb1 09:23:10 E: + sectors=466784577 09:23:10 E: + mb=227922 09:23:10 E: + dd if=/dev/zero of=/dev/sdb1 bs=1M count=8192 09:24:04 E: 8192+0 records in 09:24:04 E: 8192+0 records out 09:24:04 E: 8589934592 bytes (8.6 GB) copied, 53.9814 s, 159 MB/s 09:24:04 E: + '[' 227922 -gt 8192 ']' 09:24:04 E: + dd if=/dev/zero of=/dev/sdb1 bs=1M count=8192 seek=219730 09:24:58 E: 8192+0 records in 09:24:58 E: 8192+0 records out 09:24:58 E: 8589934592 bytes (8.6 GB) copied, 54.6029 s, 157 MB/s 09:24:58 E: + for DEVPART in '$(ls /dev/${DEV}* | sort -r)' 09:24:58 E: ++ blockdev --getsz /dev/sdb 09:24:58 E: + sectors=466796544 09:24:58 E: + mb=227928 09:24:58 E: + dd if=/dev/zero of=/dev/sdb bs=1M count=8192 09:25:33 E: 8192+0 records in 09:25:33 E: 8192+0 records out 09:25:33 E: 8589934592 bytes (8.6 GB) copied, 34.9873 s, 246 MB/s 09:25:33 E: + '[' 227928 -gt 8192 ']' 09:25:33 E: + dd if=/dev/zero of=/dev/sdb bs=1M count=8192 seek=219736 09:26:08 E: 8192+0 records in 09:26:08 E: 8192+0 records out 09:26:08 E: 8589934592 bytes (8.6 GB) copied, 34.6918 s, 248 MB/s 09:26:08 E: + sync 09:26:08 O: Not zeroing removable device sdc 09:26:08 O: Not zeroing removable device sdd 09:26:08 E: + flock -s /dev/sdb partprobe /dev/sdb 09:26:08 O: Not zeroing removable device sde 09:26:08 E: + sync 09:26:08 O: Not zeroing removable device sdf 09:26:08 E: + for DEV in '$DISKS' 09:26:08: + '[' -d /sys/block/sdc ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sdc' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/sdd ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sdd' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/sde ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sde' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/sdf ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + '[' -d /sys/block/sdc ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sdc' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/sdd ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sdd' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/sde ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sde' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/sdf ']' 09:26:08 E: + REMOVABLE=1 09:26:08 E: + (( 1 == 1 )) 09:26:08 E: + echo 'Not zeroing removable device sdf' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/hda ']' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/hdb ']' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/vda ']' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/vdb ']' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/vdc ']' 09:26:08 E: + continue 09:26:08 E: + for DEV in '$DISKS' 09:26:08 E: + '[' -d /sys/block/vdd ']' 09:26:08 E: + continue 09:26:08 E: + lvm pvscan --cache 09:26:08 E: + '[' 0 -eq 1 ']' 09:26:08 O: Looking at the disks 09:26:08 E: + echo 'Looking at the disks' 09:26:08 E: + '[' false = true ']' 09:26:08 E: + export cdrom 09:26:08 E: + export INSECURE_MODE 09:26:08 E: + cp -f /cdrom/partition-apicnx.sh /cdrom/partition-apicnx.sh.signature /cdrom/partition-apic-qa-master-branch.sh /cdrom/partition-apic-qa-master-branch.sh.signature /cdrom/partition-helpers.sh /cdrom/partition-helpers.sh.signature /cdrom/partition.sh /cdrom/partition.sh.signature / 09:26:08 E: + chown 0:0 /partition.sh 09:26:08 E: + chmod 755 /partition.sh 09:26:08 E: + /partition.sh 09:26:08 E: + . /partition-helpers.sh 09:26:08 E: ++ cp -f /cdrom/megacli/opt/MegaRAID/MegaCli/MegaCli64 /usr/bin/megacli 09:26:09 E: ++ chown 0:0 /usr/bin/megacli 09:26:09 E: ++ chmod 755 /usr/bin/megacli 09:26:09 E: ++ killpid=2500 09:26:09 E: ++ raid=no 09:26:09 E: ++ declare -a vd_is_ssd 09:26:09 E: ++ sleep 60s 09:26:09 E: ++ /usr/bin/megacli -LdPdInfo -a0 -NoLog 09:26:09 E: ++ raid=yes 09:26:09 E: ++ set +x 09:26:10 E: ++ kill -9 2500 09:26:10 E: ++ wait 09:26:10 E: /partition-helpers.sh: line 175: 2500 Killed ( sleep 60s; killall -9 megacli ) 09:26:10 E: + atomvg=vg_ifc0 09:26:10 E: + layer_reserve=120 09:26:10 E: + '[' -d /dev/vg_ifc0 -a '!' -e /dev/mapper/vg_ifc0-ThinDataLV ']' 09:26:10 E: ++ is_m3_m4 09:26:10 E: +++ dmidecode 09:26:10 E: +++ grep Product 09:26:10 E: +++ grep UCSC 09:26:10 E: +++ awk '{ print $3 }' 09:26:10 E: +++ cut -c 12 09:26:11 E: ++ v=4 09:26:11 O: looking at sda 09:26:11 E: ++ '[' 4 -lt 5 ']' 09:26:11 O: sda is not removable 09:26:11 E: ++ echo legacy 09:26:11 O: size of sda is 557 09:26:11 E: ++ return 09:26:11 E: + '[' legacy = legacy ']' 09:26:11 E: + collect_disks 09:26:11 E: + DIR=/sys/block 09:26:11 E: + ROOTDRIVE= 09:26:11 E: + firstdisk= 09:26:11 E: + SSD= 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sda ']' 09:26:11 E: + echo 'looking at sda' 09:26:11 E: + REMOVABLE=0 09:26:11 E: + (( 0 == 1 )) 09:26:11 E: + echo 'sda is not removable' 09:26:11 E: + SIZE=1169920000 09:26:11 E: + GB=557 09:26:11 E: + echo 'size of sda is 557' 09:26:11 O: Identified HDD ROOTDRIVE=sda - 557 GB 09:26:11 E: + '[' -z '' ']' 09:26:11 O: looking at sdb 09:26:11 E: + firstdisk=sda 09:26:11 E: + '[' yes = no ']' 09:26:11 O: sdb is not removable 09:26:11 O: size of sdb is 222 09:26:11 E: ++ getRAIDDeviceType /sys/block/sda 09:26:11 E: ++ dev=/sys/block/sda 09:26:11 E: +++ udevadm info /sys/block/sda 09:26:11 E: +++ grep ID_PATH_TAG 09:26:11 E: ++ id_path_tag='E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_0_0' 09:26:11 E: ++ echo 'E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_0_0' 09:26:11 E: ++ grep -q usb 09:26:11 E: +++ echo E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_0_0 09:26:11 E: +++ cut -d _ -f 8 09:26:11 E: ++ scsi_id=0 09:26:11 E: ++ '[' 0 -eq 1 ']' 09:26:11 E: ++ echo HDD 09:26:11 O: Identified SSD=sdb - 222 GB 09:26:11 E: + raidDeviceType=HDD 09:26:11 O: looking at sdc 09:26:11 E: + '[' HDD = UNKNOWN ']' 09:26:11 O: looking at sdd 09:26:11 E: + '[' HDD = SSD ']' 09:26:11 O: looking at sde 09:26:11 E: + '[' HDD = HDD ']' 09:26:11 O: looking at sdf 09:26:11 E: + echo 'Identified HDD ROOTDRIVE=sda - 557 GB' 09:26:11 O: Chose root drive: ROOTDRIVE=sda 09:26:11 E: + ROOTDRIVE=sda 09:26:11 O: SSD=sdb 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sdb ']' 09:26:11 E: + echo 'looking at sdb' 09:26:11 E: + REMOVABLE=0 09:26:11 E: + (( 0 == 1 )) 09:26:11 E: + echo 'sdb is not removable' 09:26:11 E: + SIZE=466796544 09:26:11 E: + GB=222 09:26:11 E: + echo 'size of sdb is 222' 09:26:11 E: + '[' -z sda ']' 09:26:11 E: + '[' yes = no ']' 09:26:11 E: ++ getRAIDDeviceType /sys/block/sdb 09:26:11 E: ++ dev=/sys/block/sdb 09:26:11 E: +++ udevadm info /sys/block/sdb 09:26:11 E: +++ grep ID_PATH_TAG 09:26:11 E: ++ id_path_tag='E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_1_0' 09:26:11 E: ++ echo 'E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_1_0' 09:26:11 E: ++ grep -q usb 09:26:11 O: Chose root drive: ROOTDRIVE=sda 09:26:11 E: + ROOTDRIVE=sda 09:26:11 O: SSD=sdb 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sdb ']' 09:26:11 E: + echo 'looking at sdb' 09:26:11 E: + REMOVABLE=0 09:26:11 E: + (( 0 == 1 )) 09:26:11 E: + echo 'sdb is not removable' 09:26:11 E: + SIZE=466796544 09:26:11 E: + GB=222 09:26:11 E: + echo 'size of sdb is 222' 09:26:11 E: + '[' -z sda ']' 09:26:11 E: + '[' yes = no ']' 09:26:11 E: ++ getRAIDDeviceType /sys/block/sdb 09:26:11 E: ++ dev=/sys/block/sdb 09:26:11 E: +++ udevadm info /sys/block/sdb 09:26:11 E: +++ grep ID_PATH_TAG 09:26:11 E: ++ id_path_tag='E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_1_0' 09:26:11 E: ++ echo 'E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_1_0' 09:26:11 E: ++ grep -q usb 09:26:11 E: +++ echo E: ID_PATH_TAG=pci-0000_05_00_0-scsi-0_2_1_0 09:26:11 E: +++ cut -d _ -f 8 09:26:11 E: ++ scsi_id=1 09:26:11 E: ++ '[' 1 -eq 1 ']' 09:26:11 E: ++ echo SSD 09:26:11 E: + raidDeviceType=SSD 09:26:11 E: + '[' SSD = UNKNOWN ']' 09:26:11 E: + '[' SSD = SSD ']' 09:26:11 E: + echo 'Identified SSD=sdb - 222 GB' 09:26:11 E: + SSD=sdb 09:26:11 E: + '[' SSD = HDD ']' 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sdc ']' 09:26:11 E: + echo 'looking at sdc' 09:26:11 E: + REMOVABLE=1 09:26:11 E: + (( 1 == 1 )) 09:26:11 E: + continue 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sdd ']' 09:26:11 E: + echo 'looking at sdd' 09:26:11 E: + REMOVABLE=1 09:26:11 E: + (( 1 == 1 )) 09:26:11 E: + continue 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sde ']' 09:26:11 E: + echo 'looking at sde' 09:26:11 E: + REMOVABLE=1 09:26:11 E: + (( 1 == 1 )) 09:26:11 E: + continue 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/sdf ']' 09:26:11 E: + echo 'looking at sdf' 09:26:11 E: + REMOVABLE=1 09:26:11 E: + (( 1 == 1 )) 09:26:11 E: + continue 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/hda ']' 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/hdb ']' 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/vda ']' 09:26:11 E: + for DEV in sda sdb sdc sdd sde sdf hda hdb vda vdb 09:26:11 E: + '[' -d /sys/block/vdb ']' 09:26:11 E: + '[' -z sda ']' 09:26:11 E: + echo 'Chose root drive: ROOTDRIVE=sda' 09:26:11 E: + echo SSD=sdb 09:26:11 E: + fresh_install_legacy_hw 09:26:11 E: + sfdisk -D -uM /dev/sda 09:26:11 E: Checking that no-one is using this disk right now ... 09:26:11 O: 09:26:11 E: OK 09:26:11 O: Disk /dev/sda: 72824 cylinders, 255 heads, 63 sectors/track 09:26:11 E: sfdisk: /dev/sda: unrecognized partition table type 09:26:11 O: Old situation: 09:26:11 E: 09:26:11 O: New situation: 09:26:11 E: sfdisk: No partitions found 09:26:11 O: Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from 0 09:26:11 E: 09:26:11 O: 09:26:11 E: Warning: no primary partition is marked bootable (active) 09:26:11 O: Device Boot Start End MiB #blocks Id System 09:26:11 E: This does not matter for LILO, but the DOS MBR will not boot this disk. 09:26:11 O: /dev/sda1 0+ 5004- 5005- 5124703+ 83 Linux 09:26:11 O: /dev/sda2 5004+ 571248- 566245- 579834045 83 Linux 09:26:11 O: /dev/sda3 0 - 0 0 0 Empty 09:26:11 O: /dev/sda4 0 - 0 0 0 Empty 09:26:11 O: Successfully wrote the new partition table 09:26:11 O: 09:26:11 O: Re-reading the partition table ... 09:26:11 E: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) 09:26:11 O: 09:26:11 E: to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 09:26:11 E: (See fdisk(8).) 09:26:11 E: + sync 09:26:11 E: + flock -s /dev/sda partprobe /dev/sda 09:26:11 E: + sync 09:26:11 E: + lvm pvscan --cache 09:26:11 E: + lvm pvcreate --metadatasize 128M /dev/sda2 09:26:11 O: Physical volume "/dev/sda2" successfully created 09:26:11 O: Creating volume group and thin pool LVs 09:26:11 E: + echo 'Creating volume group and thin pool LVs' 09:26:11 E: + lvm vgcreate vg_ifc0 /dev/sda2 09:26:11 O: Volume group "vg_ifc0" successfully created 09:26:11 E: + mkfs.ext4 /dev/sda1 09:26:11 E: mke2fs 1.42.9 (28-Dec-2013) 09:26:11 O: Filesystem label= 09:26:11 O: OS type: Linux 09:26:11 O: Block size=4096 (log=2) 09:26:11 O: Fragment size=4096 (log=2) 09:26:11 O: Stride=0 blocks, Stripe width=0 blocks 09:26:11 O: 320640 inodes, 1281175 blocks 09:26:11 O: 64058 blocks (5.00%) reserved for the super user 09:26:11 O: First data block=0 09:26:11 O: Maximum filesystem blocks=1312817152 09:26:11 O: 40 block groups 09:26:11 O: 32768 blocks per group, 32768 fragments per group 09:26:11 O: 8016 inodes per group 09:26:11 O: Superblock backups stored on blocks: 09:26:11 O: 32768, 98304, 163840, 229376, 294912, 819200, 884736 09:26:11 O: 09:26:11 O: Allocating group tables: done 09:26:11 O: Writing inode tables: done 09:26:12 O: Creating journal (32768 blocks): done 09:26:13 E: + echo 'Partitioning SSD=sdb' 09:26:13 O: Writing superblocks and filesystem accounting information: done 09:26:13 E: + sfdisk -D -uM /dev/sdb 09:26:13 O: 09:26:13 E: Checking that no-one is using this disk right now ... 09:26:13 O: Partitioning SSD=sdb 09:26:13 E: OK 09:26:11 O: 64058 blocks (5.00%) reserved for the super user 09:26:11 O: First data block=0 09:26:11 O: Maximum filesystem blocks=1312817152 09:26:11 O: 40 block groups 09:26:11 O: 32768 blocks per group, 32768 fragments per group 09:26:11 O: 8016 inodes per group 09:26:11 O: Superblock backups stored on blocks: 09:26:11 O: 32768, 98304, 163840, 229376, 294912, 819200, 884736 09:26:11 O: 09:26:11 O: Allocating group tables: done 09:26:11 O: Writing inode tables: done 09:26:12 O: Creating journal (32768 blocks): done 09:26:13 E: + echo 'Partitioning SSD=sdb' 09:26:13 O: Writing superblocks and filesystem accounting information: done 09:26:13 E: + sfdisk -D -uM /dev/sdb 09:26:13 O: 09:26:13 E: Checking that no-one is using this disk right now ... 09:26:13 O: Partitioning SSD=sdb 09:26:13 E: OK 09:26:13 O: 09:26:13 O: Disk /dev/sdb: 29056 cylinders, 255 heads, 63 sectors/track 09:26:13 E: sfdisk: /dev/sdb: unrecognized partition table type 09:26:13 O: Old situation: 09:26:13 E: 09:26:13 O: New situation: 09:26:13 E: sfdisk: No partitions found 09:26:13 O: Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from 0 09:26:13 E: 09:26:13 O: 09:26:13 E: Warning: no primary partition is marked bootable (active) 09:26:13 O: Device Boot Start End MiB #blocks Id System 09:26:13 E: This does not matter for LILO, but the DOS MBR will not boot this disk. 09:26:13 O: /dev/sdb1 0+ 227922- 227923- 233392288+ 83 Linux 09:26:13 E: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) 09:26:13 E: to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 09:26:13 O: /dev/sdb2 0 - 0 0 0 Empty 09:26:13 O: /dev/sdb3 0 - 0 0 0 Empty 09:26:13 E: (See fdisk(8).) 09:26:13 E: + sync 09:26:13 O: /dev/sdb4 0 - 0 0 0 Empty 09:26:13 E: + flock -s /dev/sdb partprobe /dev/sdb 09:26:13 O: Successfully wrote the new partition table 09:26:13 E: + sync 09:26:13 O: 09:26:13 E: + lvm pvscan --cache 09:26:13 O: Re-reading the partition table ... 09:26:13 O: 09:26:13 E: + lvm pvcreate --metadatasize 128M /dev/sdb1 09:26:13 O: Physical volume "/dev/sdb1" successfully created 09:26:13 E: + echo 'Creating vg_ifc0_ssd volume group' 09:26:13 O: Creating vg_ifc0_ssd volume group 09:26:13 E: + lvm vgcreate vg_ifc0_ssd /dev/sdb1 09:26:13 O: Volume group "vg_ifc0_ssd" successfully created 09:26:13 E: + createEncryptedLV rfs1 vg_ifc0 40G thick 09:26:13 E: + '[' false = true ']' 09:26:13 E: + encryptedLV=rfs1 09:26:13 E: + decryptedLV=rfs1_enc 09:26:13 E: + vgname=vg_ifc0 09:26:13 E: + size=40G 09:26:13 E: + thick=thick 09:26:13 E: + '[' -s /tmp/fEHx1tMR ']' 09:26:13 O: Generating passphrase for TPM 1.2 09:26:13 E: + generatePassphrase 09:26:13 E: + cp /cdrom/tpm-find-device.sh /usr/bin/tpm-find-device.sh 09:26:13 E: + chmod 755 /usr/bin/tpm-find-device.sh 09:26:13 E: + '[' -e /sys/class/tpm/tpm0/device/caps ']' 09:26:13 E: + echo 'Generating passphrase for TPM 1.2' 09:26:13 E: + for f in tpm-1.2-init.sh 09:26:13 E: + cp /cdrom/tpm-1.2-init.sh /usr/bin/ 09:26:13 E: + chmod 755 /usr/bin/tpm-1.2-init.sh 09:26:13 E: + /usr/bin/tpm-1.2-init.sh /tmp/lkf 09:26:13 O: tpm-1.2-init: creating /tmp/lkf 09:26:13 E: + keyfile=/tmp/lkf 09:26:13 E: + echo 'tpm-1.2-init: creating /tmp/lkf' 09:26:13 E: + '[' '!' -f /tmp/tpmdrive ']' 09:26:13 E: + /usr/bin/tpm-find-device.sh 09:26:13 E: + mkdir -p /var/lib/tpm 09:26:13 E: + mkdir -p /tmp/bootflash 09:26:13 E: + device= 09:26:13 E: ++ ls /sys/block 09:26:13 E: ++ grep '[sv]d' 09:26:13 E: + for DEV in '$(ls /sys/block | grep [sv]d)' 09:26:13 E: + '[' -e /dev/sda1 ']' 09:26:13 E: + mount /dev/sda1 /tmp/bootflash 09:26:13 E: + '[' -f /tmp/bootflash/luks.enc ']' 09:26:13 O: atomix: no bootflash info on device: sda 09:26:13 E: + echo 'atomix: no bootflash info on device: sda' 09:26:13 E: + umount -l /tmp/bootflash 09:26:13 E: + for DEV in '$(ls /sys/block | grep [sv]d)' 09:26:13 E: + '[' -e /dev/sdb1 ']' 09:26:13 E: + mount /dev/sdb1 /tmp/bootflash 09:26:13 E: mount: unknown filesystem type 'LVM2_member' 09:26:13 E: + continue 09:26:13 E: + for DEV in '$(ls /sys/block | grep [sv]d)' 09:26:13 E: + '[' -e /dev/sdc1 ']' 09:26:13 E: + mount /dev/sdc1 /tmp/bootflash 09:26:13 E: + '[' -f /tmp/bootflash/luks.enc ']' 09:26:13 O: atomix: found bootflash device: /dev/sdc 09:26:13 E: + device=/dev/sdc 09:26:13 E: + echo 'atomix: found bootflash device: /dev/sdc' 09:26:13 E: + '[' -f /tmp/bootflash/system.data ']' 09:26:13 E: + cp -f /tmp/bootflash/system.data /var/lib/tpm/system.data 09:26:13 E: + break 09:26:13 E: + echo /dev/sdc 09:26:13 E: + device=/dev/sdc 09:26:13 E: + '[' -z /dev/sdc ']' 09:26:13 E: + pidof tcsd 09:26:13 O: atomix: TPM 1.2 detected; starting tcsd 09:26:13 E: + echo 'atomix: TPM 1.2 detected; starting tcsd' 09:26:13 E: + grep -q tss /etc/passwd 09:26:13 E: + grep -q tss /etc/group 09:26:13 E: + grep -q tss /etc/shadow 09:26:13 E: + '[' '!' -f /etc/nsswitch.conf ']' 09:26:13 E: + ip addr add 127.0.0.1 dev lo 09:26:13 E: + '[' '!' -f /etc/hosts ']' 09:26:13 E: + ip link set lo up 09:26:13 E: + mkdir -p /var/lib/tpm 09:26:13 E: + chown tss:tss /etc/tcsd.conf /var/lib/tpm 09:26:13 E: + chmod 0600 /etc/tcsd.conf 09:26:13 E: + mountpoint /tmp/bootflash 09:26:13 O: /tmp/bootflash is a mountpoint 09:26:13 E: + cp -f /tmp/bootflash/system.data /var/lib/tpm/system.data 09:26:13 E: + launchTCSD 09:26:13 E: + sleep 30s 09:26:43 E: + for i in '{1..30}' 09:26:43 O: waiting for tcsd, try #1 09:26:43 E: + echo 'waiting for tcsd, try #1' 09:26:43 E: + /usr/sbin/tcsd -f 09:26:43 E: + sleep 5s 09:26:48 E: + tpm_version 09:26:48 O: TPM 1.2 Version Info: 09:26:48 E: + return 0 09:26:48 O: Chip Version: 1.2.66.1 09:26:48 E: + e=0 09:26:48 O: Spec Level: 2 09:26:48 E: + '[' 0 -ne 0 ']' 09:26:48 O: Errata Revision: 3 09:26:48 E: + tpm_unsealdata -z -i /tmp/bootflash/luks.enc -o /tmp/lkf 09:26:48 O: TPM Vendor ID: ATML 09:26:48 O: TPM Version: 01010000 09:26:48 O: Manufacturer Info: 41544d4c 09:26:49 E: + e=0 09:26:49 E: + '[' 0 -ne 0 ']' 09:26:49 E: + umount -l /tmp/bootflash 09:26:49 E: + rmdir /tmp/bootflash 09:26:49 E: + doGeneratePassphrase 09:26:49 E: + python -c 'import uuid, sys; sys.stdout.write("insieme-%s" % uuid.uuid4().hex)' 09:26:43 E: + echo 'waiting for tcsd, try #1' 09:26:43 E: + /usr/sbin/tcsd -f 09:26:43 E: + sleep 5s 09:26:48 E: + tpm_version 09:26:48 O: TPM 1.2 Version Info: 09:26:48 E: + return 0 09:26:48 O: Chip Version: 1.2.66.1 09:26:48 E: + e=0 09:26:48 O: Spec Level: 2 09:26:48 E: + '[' 0 -ne 0 ']' 09:26:48 O: Errata Revision: 3 09:26:48 E: + tpm_unsealdata -z -i /tmp/bootflash/luks.enc -o /tmp/lkf 09:26:48 O: TPM Vendor ID: ATML 09:26:48 O: TPM Version: 01010000 09:26:48 O: Manufacturer Info: 41544d4c 09:26:49 E: + e=0 09:26:49 E: + '[' 0 -ne 0 ']' 09:26:49 E: + umount -l /tmp/bootflash 09:26:49 E: + rmdir /tmp/bootflash 09:26:49 E: + doGeneratePassphrase 09:26:49 E: + python -c 'import uuid, sys; sys.stdout.write("insieme-%s" % uuid.uuid4().hex)' 09:26:50 E: + pass=insieme-acfe9198add747a081326e283c3182d1 09:26:50 E: ++ getFileIndex /var/ifc/luks-passwd- /var/ifc/tpm/luks-passwd- 09:26:50 E: ++ path1=/var/ifc/luks-passwd- 09:26:50 E: ++ path2=/var/ifc/tpm/luks-passwd- 09:26:50 E: ++ index=0 09:26:50 E: ++ '[' -f /var/ifc/luks-passwd-0 -o -f /var/ifc/tpm/luks-passwd-0 ']' 09:26:50 E: ++ echo 0 09:26:50 E: + index=0 09:26:50 E: + mkdir -p /var/ifc/tpm 09:26:50 E: + '[' -e /sys/class/tpm/tpm0/device/caps ']' 09:26:50 E: + tpmSealFilename=/var/ifc/tpm/luks-passwd-0 09:26:50 E: + '[' '!' -s /var/lib/tpm/system.data ']' 09:26:50 E: + echo -n insieme-acfe9198add747a081326e283c3182d1 09:26:50 E: + tpm_sealdata -z -o /var/ifc/tpm/luks-passwd-0 09:26:50 E: TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired 09:26:50 E: TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired 09:26:50 E: Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl, code=0087 (135), I/O error 09:26:50 E: + cleanup 09:26:50 E: + rm -f /tmp/fEHx1tMR 09:26:50 E: + rm -f /tmp/lkf