@echo off
echo ******************************************
echo Make sure you have plugged into the UC500 then obtained an IP address before running this.
echo ******************************************
pause
route delete 0.0.0.0 mask 0.0.0.0 192.168.10.1 
route add 192.168.10.0 mask 255.255.255.0 192.168.10.1
route add 10.1.10.0 mask 255.255.255.0 192.168.10.1
route add 10.1.1.0 mask 255.255.255.0 192.168.10.1
route add 192.168.75.0 mask 255.255.255.0 192.168.10.1
pause