*****************
Cisco Systems Inc.
SPA9000 Voice System
Setup Wizard
*****************

Draft Release Notes for version 2.1.1.2 BETA


Enhancements over version 2.1.1.0:
- User Interface localized for French, German, Italian and Spanish in addition to English
- User Guide (SPA9000 Voice System Installation and Configuration Guide) localized for French, German, Italian and Spanish in addition to English.
- Dictionaries updated to v615 (19 languages available).
- Added Basic support for SPA500 series phones: Only first 4 line keys are handled by the wizard.
- New SPA400 settings for better PSTN interoperability: 
"Tone out on" and "Tone out off" set to 300 ms
"DTMF power" is now -80
"Dial out wait" is now 800 ms
- Locale configuration parameters changes for UK
- Locale configuration dial plan parameters change to allow 2-4 digits extension dialing
- New firmware 5.0.11 for WIP310 included
- Primary extensions are set now as private instead of shared unless the same extension number is configured on several phones.
- NAT traversal configuration page is skipped if outbound proxy is used
- Automatic checking of "Custom Routing" checkbox in the Outbound dialing configuration is now unchecked by default.
- Forcing static IP (on SPA9000 and SPA400) is now more streamlined.
- It is now possible to download dictionaries which are outside the wizard pack (devlocale.xml).



Bug Fixes:
- Removed inapropriate warning when setting multiple buttons as speed dials for same extension.
- When a line key is set for BLF/CP, the extension assigned is checked to see if it has been assigned to the primary line of a phone that supports monitoring.
- Fixed the operation of the background display picture and screen saver configuration.
- Fixed inbound call routing. Removed the unused/disabled lines from the default inbound call routing rules.
- Fixed dial plan issue with dialing internal extension dialing when extension number begin with 1.


Known bugs:
- On certain PCs, the user guide does not open when clicking User Guide button. Work around is to go to the wizard directory file (..\messages\) and open the appropriate file directly.