Cisco cordless_main() running...... 3
May 19 13:59:31 SPA232D system[134]: MemTotal: 28416 kB
May 19 13:59:32 SPA232D system[134]: MemFree: 7532 kB
Cisco cordless_main() running...... 3
Cisco cordless_main() running...... 3
Cisco [0]Off Hook
Cisco CC_eventProc(), event: CC_EV_USR_OFFHOOK(0x2), lid: 0, par: 0, par2: (nil)
Cisco AUD_ccEventProc: event 2 vid 0 par 0x0 par2 0x0
May 19 14:00:29 SPA232D sprvoip: cmd  5, EP 1, ParameterType 27, ParameterValue 20  
Cisco sysstatus_set_led_status_payton(), led_id: 1, statusCode:7, systemEvent: 0x100095
Cisco uchEnableDspFlow(), Enable DSP flow on EP 1
Cisco [IVR_eventProc] evt 2 lid 0
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e326c, event=10(CC_EV_USR_SEIZURE), par=0, par2=(nil))
Cisco cepIdleProc(), lid=0
Cisco cepIdleProc(), pname=sip.voipmove.com
Cisco cepIdleProc(), SYS_NOREG_CALL(0)=0, SIP_REGISTER_OK(0)=1
Cisco [AUD]Get UCH node for AUD_LINE 0 0.
Cisco uchAllocateNode(), Node 0 allocated ret=0
Cisco [AUD]UCH node 0 allocated to AUD_LINE 0.
Cisco uchConnectEpToNode(), connecting EP FXS to node 0
Cisco uchEnableNode(), Node 0 enbaled ret=0
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_DIALING
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x87c ret 0
Cisco SLIC_startTone 1
May 19 14:00:29 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:29 SPA232D sprvoip: cmd  5, EP 1, ParameterType 26, ParameterValue 30  
May 19 14:00:29 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:29 SPA232D sprvoip: cmd  5, EP 1, ParameterType 23, ParameterValue 1  
May 19 14:00:29 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:29 SPA232D sprvoip: cmd  2 
May 19 14:00:29 SPA232D sprvoip:  Seq Num 28 
May 19 14:00:29 SPA232D sprvoip: cmd - 2, response 2 
May 19 14:00:29 SPA232D sprvoip: cmd  10, EP 1, Node ID 0  
May 19 14:00:29 SPA232D sprvoip: cmd - 10, response 10 
May 19 14:00:29 SPA232D sprvoip: cmd  14, NodeId 0  
May 19 14:00:29 SPA232D sprvoip: cmd - 14, response 18 
May 19 14:00:29 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:29 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 0 
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 0 in 3284228
Cisco EVENT_DTMFON 0
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 48, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x30 par2 0xffff0000
Cisco EVENT_OOB_DTMF 0
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 48, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x30 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=48, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=48, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x87c ret 0
Cisco SLIC_startTone 1
May 19 14:00:32 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 0 
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 0 in 3284228
Cisco EVENT_DTMFOFF 0
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 48, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x30 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=48, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=48, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:32 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 2 
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 2 in 3284228
Cisco EVENT_DTMFON 2
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 50, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x32 par2 0xffff0000
Cisco EVENT_OOB_DTMF 2
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 50, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x32 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=50, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=50, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:32 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 2 
May 19 14:00:32 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 2 in 3284228
Cisco EVENT_DTMFOFF 2
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 50, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x32 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=50, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=50, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 1 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 1 in 3284228
Cisco EVENT_DTMFON 1
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 49, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x31 par2 0xffff0000
Cisco EVENT_OOB_DTMF 1
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 49, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x31 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=49, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=49, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 1 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 1 in 3284228
Cisco EVENT_DTMFOFF 1
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 49, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x31 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=49, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=49, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 4 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 4 in 3284228
Cisco EVENT_DTMFON 4
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 52, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x34 par2 0xffff0000
Cisco EVENT_OOB_DTMF 4
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 52, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x34 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=52, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=52, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 4 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 4 in 3284228
Cisco EVENT_DTMFOFF 4
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 52, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x34 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=52, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=52, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 3 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 3 in 3284228
Cisco EVENT_DTMFON 3
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 51, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x33 par2 0xffff0000
Cisco EVENT_OOB_DTMF 3
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 51, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x33 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=51, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=51, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 3 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 3 in 3284228
Cisco EVENT_DTMFOFF 3
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 51, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x33 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=51, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=51, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 6 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 6 in 3284228
Cisco EVENT_DTMFON 6
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 54, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x36 par2 0xffff0000
Cisco EVENT_OOB_DTMF 6
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 54, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x36 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=54, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=54, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 6 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 6 in 3284228
Cisco EVENT_DTMFOFF 6
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 54, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x36 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=54, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=54, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 2 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 2 in 3284228
Cisco EVENT_DTMFON 2
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 50, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x32 par2 0xffff0000
Cisco EVENT_OOB_DTMF 2
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 50, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x32 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=50, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=50, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:33 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 2 
May 19 14:00:33 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 2 in 3284228
Cisco EVENT_DTMFOFF 2
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 50, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x32 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=50, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=50, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 4 
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 4 in 3284228
Cisco EVENT_DTMFON 4
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 52, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x34 par2 0xffff0000
Cisco EVENT_OOB_DTMF 4
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 52, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x34 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=52, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=52, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 4 
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 4 in 3284228
Cisco EVENT_DTMFOFF 4
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 52, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x34 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=52, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=52, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 1 
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 1 in 3284228
Cisco EVENT_DTMFON 1
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 49, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x31 par2 0xffff0000
Cisco EVENT_OOB_DTMF 1
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 49, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x31 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=49, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=49, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 1 
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 1 in 3284228
Cisco EVENT_DTMFOFF 1
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 49, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x31 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=49, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=49, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 58 received EP 1 lid 0
Cisco line:0 DTMFON event received digit 0 
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 58 
Cisco EVQ_read: 1 0 in 3284228
Cisco EVENT_DTMFON 0
Cisco CC_eventProc(), event: CC_EV_USR_DTMFON(0x4), lid: 0, par: 48, par2: 0xffff0000
Cisco AUD_ccEventProc: event 4 vid 0 par 0x30 par2 0xffff0000
Cisco EVENT_OOB_DTMF 0
Cisco CC_eventProc(), event: CC_EV_USR_OOB_DTMF(0x8), lid: 0, par: 48, par2: 0xffff0096
Cisco AUD_ccEventProc: event 8 vid 0 par 0x30 par2 0xffff0096
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=8(CC_EV_USR_OOB_DTMF), par=48, par2=0xffff0096)
Cisco cepDialingProc(), event = 8(CC_EV_USR_OOB_DTMF)
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=8(CC_EV_USR_OOB_DTMF), par=48, par2=0xffff0096)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco uchAppCb(), Event 59 received EP 1 lid 0
Cisco line:0 DTMFOFF event received digit 0 
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 59 
Cisco EVQ_read: 0 0 in 3284228
Cisco EVENT_DTMFOFF 0
Cisco CC_eventProc(), event: CC_EV_USR_DTMFOFF(0x5), lid: 0, par: 48, par2: 0xffff0000
Cisco AUD_ccEventProc: event 5 vid 0 par 0x30 par2 0xffff0000
Cisco [IVR_eventProc] evt 5 lid 0
Cisco callEventProcTable[1] is cepDialingProc
Cisco cepDialingProc(lid=0, call=0x2e326c, event=5(CC_EV_USR_DTMFOFF), par=48, par2=0xffff0000)
Cisco cepDialingProc(), event = 5(CC_EV_USR_DTMFOFF)
Cisco [checkSuppFeatActCode] lid 0 vid 0 dn 0214362410@gw0
Cisco gwid: 0, lid: 0
Cisco getCodecList line 0x2e3268 call 0x2e326c clRemote: 0x0 bInbound 0
Cisco pconly: 0
Cisco force to use just G711u for internal voip call
Cisco ====== Local codec num 1 ======
Cisco 0Cisco ================================
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_DIALING, new state CC_CST_CALLING
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=5(CC_EV_USR_DTMFOFF), par=48, par2=0xffff0000)
Cisco cepIdleProc(), lid=0
Cisco SLIC_stopRing
Cisco SLIC_stopRing
May 19 14:00:34 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
May 19 14:00:34 SPA232D sprvoip: cmd - 28, response 48 
Cisco Calling:0214362410@127.0.0.1:5061, rc=2
Cisco ++++ called number = 0214362410
Cisco RTP_nextMediaPort(), port = 16386
Cisco RTP_nextMediaPort(), rc=16384
Cisco AUD_allocCallObj() call(0x323228)
Cisco [0:0]AUD ALLOC CALL (port=16384)
Cisco +++++ initSession AUD_startRtpRx
Cisco [AUD]AUD_startRtpRx(0x323228) lid 0
Cisco Local loopback mode: None. Type: None.
Cisco Remote loopback mode: None. Type None.
Cisco >>>> uchGetChanAndEP()
Cisco <<<< uchGetChanAndEP(0,2)
May 19 14:00:35 SPA232D sprvoip:  ch_GetChannelAndEP(): 
May 19 14:00:35 SPA232D sprvoip: cmd - 21, response 36 
Cisco RTP channel setup: udp_no_checksum 0, sysmmetric_rtp 0, tos 0xb8, cos 6, mlb 0.
Cisco uchConnectEpToNode(), connecting EP VoIP 0 to node 0
Cisco uchEnableEchoCan(), lid 0 EP 1 disable
Cisco uchEnableModemCall(), lid 0 EP 1 enable
Cisco UCH sync parameter hold off time is 70
Cisco uchSetGTD(), Disable GTD for FXS 
Cisco uchSetDTMFMute(), DISABLE
Cisco cordless_start_rtp(), chan:0 remote ip:(null) port:0 local:16384 rx:1 ipt:8 ptime:20 bInMdmPasstru:0
Cisco Starting Rx only RTP.
Cisco Socket 33 bound to port 16384.
Cisco Remote IP/port: 0.0.0.0:0
Cisco Codec list from SDP (internal pt):Cisco  0Cisco  134Cisco  136Cisco 
Cisco Rx payload list: Cisco  PCMU/8000(0)Cisco  NSE/8000(100)Cisco  encaprtp/8000(112)Cisco 
Cisco set RTP_SESSION_OPT_DTMF
Cisco VAD = 0
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_REC_ONLY, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event -1, tx_pt 8 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 180ms, min 60ms, adapt 1
Cisco RTP Channel 0 is virgin: 1.
Cisco #### rtp seq number is 5922 
May 19 14:00:35 SPA232D sprvoip: cmd  10, EP 2, Node ID 0  
May 19 14:00:35 SPA232D sprvoip: cmd - 10, response 10 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 22, ParameterValue 0  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 27, ParameterValue 60  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 26, ParameterValue 1000  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd - 30, response 52 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 27, ParameterValue 30  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 26, ParameterValue 40  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd - 29, response 50 
May 19 14:00:35 SPA232D sprvoip: cmd - 20, response 34 
Cisco RTP session 0 started
Cisco [AUD]RTP Rx Up
Cisco [0]->127.0.0.1:5061(903)
Cisco [0]->127.0.0.1:5061(903)
INVITE sip:0214362410@127.0.0.1:5061 SIP/2.0

Via: SIP/2.0/UDP 192.168.1.7:5060;branch=z9hG4bK-64db7bc1

From: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;tag=26f0185e89dcb68o0

To: <sip:0214362410@127.0.0.1:5061>

Remote-Party-ID: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;screen=yes;party=calling

Call-ID: b1aa9c16-df425b10@192.168.1.7

CSeq: 101 INVITE

Max-Forwards: 70

Contact: "VoipMove" <sip:XXXYYYXXX@192.168.1.7:5060;ref=XXXYYYXXX>

Expires: 240

User-Agent: Cisco/SPA232D-1.4.1(002_282)

Content-Length: 251

Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER

Supported: replaces

Content-Type: application/sdp



v=0

o=- 525776 525776 IN IP4 192.168.1.7

s=-

c=IN IP4 192.168.1.7

t=0 0

m=audio 16384 RTP/AVP 0 100 101

a=rtpmap:0 PCMU/8000

a=rtpmap:100 NSE/8000

a=fmtp:100 192-193

a=rtpmap:101 telephone-event/8000

a=fmtp:101 0-15

a=ptime:20

a=sendrecv

Cisco 
Cisco 
Cisco FXO_checkValidNumber: bNeedPin=0, one_stage_dial=1
Cisco +++++ 2 1 0214362410
Cisco +++++ 2 1 0214362410
Cisco +++ dial plan = (xx.) (on 0214362410)
Cisco CC_eventProc(), event: CC_EV_SIG_CALL_ARRIVED(0x34), lid: 2, par: 0, par2: 0x409d974c
Cisco AUD_ccEventProc: event 52 vid 2 par 0x0 par2 0x409d974c
Cisco [2:0]voip call answered(st=0) 0214362410
Cisco getCodecList line 0x2e80a8 call 0x2e80ac clRemote: 0x409d97dc bInbound 1
Cisco pconly: 0
Cisco force to use just G711u for internal voip call
Cisco ====== Local codec num 1 ======
Cisco 0Cisco ================================
Cisco [AUD]Get UCH node for AUD_LINE 2 1.
Cisco uchAllocateNode(), Node 1 allocated ret=0
Cisco [AUD]UCH node 1 allocated to AUD_LINE 2.
Cisco uchEnableNode(), Node 1 enbaled ret=0
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=2, call=0x2e80ac, event=19(CC_EV_USR_ACCEPTCALL), par=0, par2=(nil))
Cisco cepIdleProc(), lid=2
Cisco cepIdleProc(), line->sigProc(CC_CMD_ACCEPT)
Cisco cepIdleProc(), call->cinf.bAutoAnswer = 0
Cisco ++++ no ring limit = 0
Cisco ++++ no ring limit = 0
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_RINGING
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco RTP_nextMediaPort(), port = 16388
Cisco RTP_nextMediaPort(), rc=16386
Cisco AUD_allocCallObj() call(0x3563e0)
Cisco [2:0]AUD ALLOC CALL (port=16386)
Cisco +++++ SIP_lineCcCmdProc CC_CMD_ACCEPT AUD_startRtpRx
Cisco [AUD]AUD_startRtpRx(0x3563e0) lid 2
Cisco Local loopback mode: None. Type: None.
Cisco Remote loopback mode: None. Type None.
Cisco >>>> uchGetChanAndEP()
Cisco <<<< uchGetChanAndEP(1,3)
Cisco RTP channel setup: udp_no_checksum 0, sysmmetric_rtp 0, tos 0xb8, cos 6, mlb 0.
Cisco uchConnectEpToNode(), connecting EP VoIP 1 to node 1
Cisco uchEnableEchoCan(), lid 2 EP 0 enable
Cisco UCH sync parameter hold off time is 0
Cisco uchSetDTMFMute(), DISABLE
Cisco cordless_start_rtp(), chan:1 remote ip:(null) port:0 local:16386 rx:1 ipt:8 ptime:20 bInMdmPasstru:0
Cisco Starting Rx only RTP.
Cisco Socket 36 bound to port 16386.
Cisco Remote IP/port: 0.0.0.0:0
Cisco Codec list from SDP (internal pt):Cisco  0Cisco  134Cisco  136Cisco 
Cisco Rx payload list: Cisco  PCMU/8000(0)Cisco  NSE/8000(100)Cisco  encaprtp/8000(112)Cisco 
Cisco set RTP_SESSION_OPT_DTMF
Cisco VAD = 0
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_REC_ONLY, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 8 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 70ms, min 60ms, adapt 1
Cisco RTP Channel 1 is virgin: 1.
Cisco #### rtp seq number is 4953 
May 19 14:00:35 SPA232D sprvoip: cmd  2 
May 19 14:00:35 SPA232D sprvoip:  Seq Num 62 
May 19 14:00:35 SPA232D sprvoip: cmd - 2, response 2 
May 19 14:00:35 SPA232D sprvoip: cmd  14, NodeId 1  
May 19 14:00:35 SPA232D sprvoip: cmd - 14, response 18 
May 19 14:00:35 SPA232D sprvoip:  ch_GetChannelAndEP(): 
May 19 14:00:35 SPA232D sprvoip: cmd - 21, response 36 
May 19 14:00:35 SPA232D sprvoip: cmd  10, EP 3, Node ID 1  
May 19 14:00:35 SPA232D sprvoip: cmd - 10, response 10 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 0, ParameterType 22, ParameterValue 1  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 0, ParameterType 27, ParameterValue 30  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 0, ParameterType 26, ParameterValue 40  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd - 20, response 34 
Cisco RTP session 1 started
Cisco [AUD]RTP Rx Up
Cisco callEventProcTable[5] is cepRingingProc
Cisco cepRingingProc(lid=2, call=0x2e80ac, event=31(CC_EV_TMR_NOANS), par=0, par2=(nil))
Cisco callEventProcTable[5] is cepRingingProc
Cisco cepRingingProc(lid=2, call=0x2e80ac, event=12(CC_EV_USR_ANSWER), par=0, par2=(nil))
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_RINGING, new state CC_CST_ANSWERING
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco [0]<<127.0.0.1:5061(309)
Cisco [0]<<127.0.0.1:5061(309)
SIP/2.0 100 Trying

To: <sip:0214362410@127.0.0.1:5061>

From: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;tag=26f0185e89dcb68o0

Call-ID: b1aa9c16-df425b10@192.168.1.7

CSeq: 101 INVITE

Via: SIP/2.0/UDP 192.168.1.7:5060;branch=z9hG4bK-64db7bc1

Server: Cisco/SPA232D-1.4.1(002_282)

Content-Length: 0



Cisco 
Cisco 
Cisco SIP_tsInviteClientEventProc(event:28)
Cisco SIP_sessTsEventProc(event:28)
Cisco xxxx SIP session.c  b1aa9c16-df425b10@192.168.1.7 processInviteResponse statusClass=1
Cisco uchStopVoipTone(), Stop Voip Tone EP 3
Cisco Start timer G and H (e=22)
Cisco [0]<<127.0.0.1:5061(745)
Cisco [0]<<127.0.0.1:5061(745)
SIP/2.0 200 OK

To: <sip:0214362410@127.0.0.1:5061>;tag=b2cd87b4c8ec345di2

From: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;tag=26f0185e89dcb68o0

Call-ID: b1aa9c16-df425b10@192.168.1.7

CSeq: 101 INVITE

Via: SIP/2.0/UDP 192.168.1.7:5060;branch=z9hG4bK-64db7bc1

Contact: <sip:0214362410@192.168.1.7:5061;ref=>

Server: Cisco/SPA232D-1.4.1(002_282)

Content-Length: 251

Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER

Supported: replaces

Content-Type: application/sdp



v=0

o=- 525826 525826 IN IP4 192.168.1.7

s=-

c=IN IP4 192.168.1.7

t=0 0

m=audio 16386 RTP/AVP 0 100 101

a=rtpmap:0 PCMU/8000

a=rtpmap:100 NSE/8000

a=fmtp:100 192-193

a=rtpmap:101 telephone-event/8000

a=fmtp:101 0-15

a=ptime:20

a=sendrecv

Cisco 
Cisco 
Cisco SIP_tsInviteClientEventProc(event:28)
Cisco Start TmrD and send ACK
Cisco SIP_sessTsEventProc(event:28)
Cisco xxxx SIP session.c  b1aa9c16-df425b10@192.168.1.7 processInviteResponse statusClass=6
Cisco SIP_sessDlgEventProc: event: 42(SIP_EV_DLG_CONFIRMED), ucState: 2
Cisco +++++ processRemoteHoldResume  faked resume START_RTPTX 
Cisco bSendRtpTxToProxy: ip: 192.168.1.7
Cisco [AUD]AUD_startRtpTx(0x323228, 0, 192.168.1.7, 16386, 20)
Cisco Local loopback mode: None. Type: None.
Cisco Remote loopback mode: None. Type None.
Cisco Already has a RTP channel.
Cisco Already has a RTP channel.
Cisco cordless_start_rtp(), chan:0 remote ip:192.168.1.7 port:16386 local:16384 rx:0 ipt:0 ptime:20 bInMdmPasstru:0
Cisco Going from Rx only to bi-directional.
Cisco Old remote IP/port: 0.0.0.0:0
Cisco Remote IP/port: 192.168.1.7:16386
Cisco Codec list from SDP (internal pt):Cisco  0Cisco  134Cisco  136Cisco 
Cisco Rx payload list: Cisco  PCMU/8000(0)Cisco  NSE/8000(100)Cisco  encaprtp/8000(112)Cisco 
Cisco set RTP_SESSION_OPT_DTMF
Cisco VAD = 0
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_ACTIVE, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 180ms, min 60ms, adapt 1
Cisco RTP Channel 0 is virgin: 0.
Cisco Just need updating.
Cisco RTP session 0 updated
Cisco [AUD]RTP Tx Up
Cisco [AUD]AUD_startRtcpTx(0x323228)
Cisco cordless_start_rtcp(), chan:0 remote ip:192.168.1.7 port:16387 intvl:0
Cisco Socket 39 bound to RTCP port 16385.
Cisco CNAME XXXYYYXXX@192.168.1.7
Cisco NAME "VoipMove"
Cisco TOOL Cisco/SPA232D-1.4.1(002_282)
Cisco Starting RTCP session on channel 0. Interval 0.Cisco  Rx only.
Cisco RTCP session started on RTP channel 0.
Cisco [AUD]RTCP Up
Cisco CC_eventProc(), event: CC_EV_SIG_CALL_RESUMED(0x31), lid: 0, par: 1, par2: (nil)
Cisco AUD_ccEventProc: event 49 vid 0 par 0x1 par2 0x0
Cisco callEventProcTable[3] is cepCallingProc
Cisco cepCallingProc(lid=0, call=0x2e326c, event=49(CC_EV_SIG_CALL_RESUMED), par=1, par2=(nil))
Cisco CC:Remote Resume
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
Cisco [AUD]AUD_startRtcpTx(0x323228)
Cisco cordless_start_rtcp(), chan:0 remote ip:192.168.1.7 port:16387 intvl:0
Cisco *** RTCP already running on channel 0.
Cisco *** RTCP already running on channel 0.
Cisco CC_eventProc(), event: CC_EV_SIG_CALL_CONNECTED(0x2F), lid: 0, par: 1, par2: (nil)
Cisco AUD_ccEventProc: event 47 vid 0 par 0x1 par2 0x0
Cisco callEventProcTable[3] is cepCallingProc
Cisco cepCallingProc(lid=0, call=0x2e326c, event=47(CC_EV_SIG_CALL_CONNECTED), par=1, par2=(nil))
Cisco CC:Connected
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_CALLING, new state CC_CST_CONNECTED
Cisco SLIC_stopRing
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
Cisco +++++ SIP_sessDlgEventProc SIP_SST_STARTING SIP_EV_DLG_CONFIRMED AUD_startRtpRx
Cisco [AUD]AUD_startRtpRx(0x323228) lid 0
Cisco Local loopback mode: None. Type: None.
Cisco Remote loopback mode: None. Type None.
Cisco Already has a RTP channel.
Cisco Already has a RTP channel.
Cisco uchConnectEpToNode(), connecting EP VoIP 0 to node 0
Cisco uchConnectEpToNode(): Error Connecting EP VoIP 0 to Node 0. -93.
Cisco uchConnectEpToNode(): Error Connecting EP VoIP 0 to Node 0. -93.
Cisco uchEnableEchoCan(), lid 0 EP 1 disable
Cisco uchEnableModemCall() Modem call state(1) not change
Cisco UCH sync parameter hold off time is 70
Cisco uchSetGTD(), Disable GTD for FXS 
Cisco uchSetGTD() GTD state not change
Cisco uchSetDTMFMute(), ENABLE
Cisco cordless_start_rtp(), chan:0 remote ip:(null) port:0 local:16384 rx:1 ipt:8 ptime:20 bInMdmPasstru:0
Cisco Going from Tx only to bi-directional.
Cisco Remote IP/port: 192.168.1.7:16386
Cisco set RTP_SESSION_OPT_DTMF
Cisco VAD = 0
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_ACTIVE, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 180ms, min 60ms, adapt 1
Cisco RTP Channel 0 is virgin: 0.
Cisco Just need updating.
Cisco RTP session 0 updated
Cisco [AUD]RTP Rx Up
Cisco [0]->192.168.1.7:5061(455)
Cisco [0]->192.168.1.7:5061(455)
ACK sip:0214362410@192.168.1.7:5061;ref= SIP/2.0

Via: SIP/2.0/UDP 192.168.1.7:5060;branch=z9hG4bK-1b71550a

From: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;tag=26f0185e89dcb68o0

To: <sip:0214362410@127.0.0.1:5061>;tag=b2cd87b4c8ec345di2

Call-ID: b1aa9c16-df425b10@192.168.1.7

CSeq: 101 ACK

Max-Forwards: 70

Contact: "VoipMove" <sip:XXXYYYXXX@192.168.1.7:5060;ref=XXXYYYXXX>

User-Agent: Cisco/SPA232D-1.4.1(002_282)

Content-Length: 0



Cisco 
Cisco 
Cisco SIP_tsInviteClientEventProc(event:2)
Cisco TmrD Fired
Cisco SIP_sessTsEventProc(event:32)
Cisco TS Detached
Cisco SIP_sessDlgEventProc: event: 43(SIP_EV_DLG_CONNECTED), ucState: 0
Cisco CC_eventProc(), event: CC_EV_SIG_CALL_CONNECTED(0x2F), lid: 2, par: 33, par2: (nil)
Cisco AUD_ccEventProc: event 47 vid 2 par 0x21 par2 0x0
Cisco callEventProcTable[7] is cepAnsweringProc
Cisco cepAnsweringProc(lid=2, call=0x2e80ac, event=47(CC_EV_SIG_CALL_CONNECTED), par=33, par2=(nil))
Cisco CC:Connected
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_ANSWERING, new state CC_CST_CONNECTED
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco +++++ SIP_sessDlgEventProc SIP_SST_ACCEPTED SIP_EV_DLG_CONNECTED START_RTPTX
Cisco bSendRtpTxToProxy: ip: 192.168.1.7
Cisco [AUD]AUD_startRtpTx(0x3563e0, 0, 192.168.1.7, 16384, 20)
Cisco Local loopback mode: None. Type: None.
Cisco Remote loopback mode: None. Type None.
Cisco Already has a RTP channel.
Cisco Already has a RTP channel.
Cisco cordless_start_rtp(), chan:1 remote ip:192.168.1.7 port:16384 local:16386 rx:0 ipt:0 ptime:20 bInMdmPasstru:0
Cisco Going from Rx only to bi-directional.
Cisco Old remote IP/port: 0.0.0.0:0
Cisco Remote IP/port: 192.168.1.7:16384
Cisco Codec list from SDP (internal pt):Cisco  0Cisco  134Cisco  136Cisco 
Cisco Rx payload list: Cisco  PCMU/8000(0)Cisco  NSE/8000(100)Cisco  encaprtp/8000(112)Cisco 
Cisco set RTP_SESSION_OPT_DTMF
Cisco VAD = 0
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_ACTIVE, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 70ms, min 60ms, adapt 1
Cisco RTP Channel 1 is virgin: 0.
Cisco Just need updating.
May 19 14:00:35 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:35 SPA232D sprvoip: cmd - 28, response 48 
May 19 14:00:35 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:35 SPA232D sprvoip: cmd - 28, response 48 
May 19 14:00:35 SPA232D sprvoip: cmd  10, EP 2, Node ID 0  
May 19 14:00:35 SPA232D sprvoip: !!! Response (11) != CH_EP_CONNECT_ACK !!!
May 19 14:00:35 SPA232D sprvoip: cmd - 10, response 11 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 22, ParameterValue 0  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 27, ParameterValue 30  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd  5, EP 1, ParameterType 26, ParameterValue 40  
May 19 14:00:35 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:35 SPA232D sprvoip: cmd - 20, response 34 
Cisco RTP session 1 updated
Cisco [AUD]RTP Tx Up
Cisco [AUD]AUD_startRtcpTx(0x3563e0)
Cisco cordless_start_rtcp(), chan:1 remote ip:192.168.1.7 port:16385 intvl:0
Cisco Socket 40 bound to RTCP port 16387.
Cisco CNAME @192.168.1.7
Cisco NAME 
Cisco TOOL Cisco/SPA232D-1.4.1(002_282)
Cisco Starting RTCP session on channel 1. Interval 0.Cisco  Rx only.
Cisco RTCP session started on RTP channel 1.
Cisco [AUD]RTCP Up
Cisco Start TMR I
Cisco TS Detached
Cisco +++ async event 7
Cisco +++ async event 7
Cisco FXO_eventProc(FXO_EV_VOIP_CONNECTED(7),2,0x3563e0,0x200)
Cisco FXO:Voip Connected
Cisco +++voip connected: 2 0 (255) 0214362410
Cisco 1, 1, 0
Cisco FXO_checkValidNumber: bNeedPin=0, one_stage_dial=1
Cisco +++++ 2 1 0214362410
Cisco +++++ 2 1 0214362410
Cisco +++ dial plan = (xx.) (on 0214362410)
Cisco ++++ one stage dialing to 0214362410
Cisco dialDelay: 1000
Cisco 0: is OffHook: 1
Cisco sysstatus_set_led_status_payton(), led_id: 3, statusCode:11, systemEvent: 0x100101
Cisco FXO:Off Hook
Cisco FXO[2]:Stop CNDD
Cisco FXO[2]:Report:sesssion=4146e4b0;cst=8
Cisco FXO[2]:Report:sesssion=4146e4b0;cst=8
Cisco DLR_initState 0214362410 delay 24 on 2 off 2
Cisco TMR I fired
Cisco uchSendDTMFStr(), sending DTMF 0 to EP 0 duration is 0ms
Cisco uchAppCb(), Event 63 received EP 0 lid 2
Cisco CH_ASYNC_EVT_SLC received on EP 0 eventdate 0x201 transition SLC_OFF in direction UCH_SLC_FXO_PATH
Cisco _uchPlayFXODTMF(), Play digit 0 EP 0
May 19 14:00:35 SPA232D sprvoip: cmd - 8, response 30 
May 19 14:00:36 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:36 SPA232D sprvoip: cmd - 15, response 63 
May 19 14:00:36 SPA232D sprvoip: cmd - 15, response 20 
Cisco uchAppCb(), Event 63 received EP 0 lid 2
Cisco CH_ASYNC_EVT_SLC received on EP 0 eventdate 0x202 transition SLC_OFF in direction UCH_SLC_VOIP_PATH
May 19 14:00:36 SPA232D sprvoip: cmd - 15, response 63 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:36 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:36 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 2 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 2 EP 0
May 19 14:00:36 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:36 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:36 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:36 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 1 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 1 EP 0
May 19 14:00:36 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:36 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:36 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:36 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 4 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 4 EP 0
May 19 14:00:37 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:37 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 3 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 3 EP 0
May 19 14:00:37 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:37 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 6 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 6 EP 0
May 19 14:00:37 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:37 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 2 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 2 EP 0
May 19 14:00:37 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:37 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:38 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 4 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 4 EP 0
May 19 14:00:38 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:38 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 1 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 1 EP 0
May 19 14:00:38 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:38 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 16, response 20 
Cisco uchSendDTMFStr(), sending DTMF 0 to EP 0 duration is 0ms
Cisco _uchPlayFXODTMF(), Play digit 0 EP 0
May 19 14:00:38 SPA232D sprvoip: cmd  15, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 15, response 20 
Cisco _uchStopDTMF(), Stop DTMF Tone on EP 0, ret=0
May 19 14:00:38 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:38 SPA232D sprvoip: cmd - 16, response 20 
Cisco +++ async event 20
Cisco +++ async event 20
Cisco FXO_eventProc(FXO_EV_DIALOUT_FINISH(20),2,0x0,0x0)
Cisco FXO:dialing out finished AudCall 0x3563e0 CcCall 0x0 state 5
Cisco connect FXO EP 0 to node 1
Cisco uchConnectEpToNode(), connecting EP FXO to node 1
May 19 14:00:39 SPA232D sprvoip: cmd  10, EP 0, Node ID 1  
May 19 14:00:39 SPA232D sprvoip: cmd - 10, response 10 
Cisco [0]On Hook 
Cisco CC_eventProc(), event: CC_EV_USR_ONHOOK(0x1), lid: 0, par: 0, par2: (nil)
Cisco AUD_ccEventProc: event 1 vid 0 par 0x0 par2 0x0
Cisco sysstatus_set_led_status_payton(), led_id: 1, statusCode:1, systemEvent: 0x100093
Cisco uchDisableDspFlow(), Disable DSP flow on EP 1
May 19 14:00:45 SPA232D sprvoip: cmd  5, EP 1, ParameterType 23, ParameterValue 0  
Cisco callEventProcTable[8] is cepConnectedProc
Cisco cepConnectedProc(lid=0, call=0x2e326c, event=1(CC_EV_USR_ONHOOK), par=0, par2=(nil))
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3538, event=1(CC_EV_USR_ONHOOK), par=0, par2=(nil))
Cisco cepIdleProc(), lid=0
Cisco callEventProcTable[8] is cepConnectedProc
Cisco cepConnectedProc(lid=0, call=0x2e326c, event=11(CC_EV_USR_ENDCALL), par=0, par2=(nil))
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_CONNECTED, new state CC_CST_IDLE
May 19 14:00:45 SPA232D sprvoip: cmd - 5, response 8 
May 19 14:00:45 SPA232D sprvoip: cmd  16, NodeId 1  
Cisco [AUD]Release UCH node for AUD_LINE 0.
May 19 14:00:45 SPA232D sprvoip: cmd - 16, response 20 
May 19 14:00:45 SPA232D sprvoip: cmd  14, NodeId 0  
Cisco uchDisableNode(), Node 0 released ret=0
Cisco [AUD]UCH node 0 freed.
Cisco SLIC_stopRing
Cisco uch_setDFC_BGM(), EP 1 value 0x65f4 ret 0
Cisco SLIC_stopTone
Cisco SIP_releaseAudioResources() entered ################!!!!!!!!!!!!!!!!!
Cisco Requesting call statistics...
May 19 14:00:45 SPA232D sprvoip: cmd - 14, response 18 
May 19 14:00:45 SPA232D sprvoip: cmd  12, NodeId 0  
May 19 14:00:45 SPA232D sprvoip: cmd - 12, response 14 
May 19 14:00:45 SPA232D sprvoip: ch_SetDFC_BGM cmd  28, EP 1  
May 19 14:00:45 SPA232D sprvoip: cmd - 28, response 48 
May 19 14:00:45 SPA232D msgswitchd[232]:   MSGSWD RTCP Reqt len 12 Data 2,0,5,226
Cisco RTP TX stats updated for channel 0
Cisco RTP RX stats updated for channel 0
Cisco RTP TX stats updated for channel 1
Cisco RTP RX stats updated for channel 1
Cisco Call statistics updated.
Cisco AUD_releaseCallObj() call(0x323228)
Cisco [AUD]AUD_stopRtpTx(0x323228)
Cisco cordless_stop_rtp_tx(), Channel 0.
Cisco RTP channel 0 going from Bi-dir to Rx.
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_REC_ONLY, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 180ms, min 60ms, adapt 1
Cisco RTP channel 0 is now Rx.
Cisco [AUD]RTP Tx Down
Cisco [AUD]AUD_stopRtpRx(0x323228)
Cisco cordless_stop_rtp_rx(), Channel 0.
Cisco RTP channel 0 going from Rx to Idle.
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_INACTIVE, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 180ms, min 60ms, adapt 1
Cisco RTP channel 0 is now Idle.
Cisco [AUD]RTP Down
Cisco [AUD]AUD_releaseRtp(0x323228)
Cisco cordless_stop_rtp(), releasing RTP channel:0
Cisco cordless_stop_rtp(), RTP session 0 stopped succussfully
Cisco uchRelChanAndEP(0, 2) 
Cisco uchDisconnectEpFromNode(), invalid node ID: -1
Cisco uchDisconnectEpFromNode(), invalid node ID: -1
Cisco [AUD]RTP channel released
Cisco [0:0]AUD Rel Call
Cisco SIP_releaseAudioResources(), CC_lineIsIdle(0)=1, gAudLine[0].bIvr=0, AUD_relUchNode????????????
Cisco [AUD]Release UCH node for AUD_LINE 0.
Cisco AUD_LINE 0 has no associated UCH node.
Cisco SIP_releaseAudioResources() exit   ################!!!!!!!!!!!!!!!!!
Cisco SIP_tsCreateClient(), 1671, uiTmrF=1600, SIP_TMR_F_INIT=1600
Cisco [0]->192.168.1.7:5061(465)
Cisco [0]->192.168.1.7:5061(465)
BYE sip:0214362410@192.168.1.7:5061;ref= SIP/2.0

Via: SIP/2.0/UDP 192.168.1.7:5060;branch=z9hG4bK-e4f7db15

From: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;tag=26f0185e89dcb68o0

To: <sip:0214362410@127.0.0.1:5061>;tag=b2cd87b4c8ec345di2

Call-ID: b1aa9c16-df425b10@192.168.1.7

CSeq: 102 BYE

Max-Forwards: 70

User-Agent: Cisco/SPA232D-1.4.1(002_282)

P-RTP-Stat: PS=521,OS=83360,PR=498,OR=79680,PL=0,JI=0,LA=0,DU=11,EN=G711u,DE=G711u

Content-Length: 0



Cisco 
Cisco 
Cisco ##### RTP_SEQ_NUM_EVT 6446
Cisco SIP_sessTsEventProc(event:27)
Cisco Start TmrJ
Cisco Requesting call statistics...
May 19 14:00:45 SPA232D sprvoip:  ch_GetChannelAndEP(): 
May 19 14:00:45 SPA232D sprvoip: cmd - 22, response 38 
May 19 14:00:46 SPA232D msgswitchd[232]:   MSGSWD RTCP Reqt len 12 Data 2,1094748508,266,226
Cisco RTP TX stats updated for channel 1
Cisco RTP RX stats updated for channel 1
Cisco Call statistics updated.
Cisco SIP_sessDlgEventProc: event: 45(SIP_EV_DLG_BYED), ucState: 3
Cisco CC_eventProc(), event: CC_EV_SIG_CALL_ENDED(0x37), lid: 2, par: 33, par2: (nil)
Cisco AUD_ccEventProc: event 55 vid 2 par 0x21 par2 0x0
Cisco callEventProcTable[8] is cepConnectedProc
Cisco cepConnectedProc(lid=2, call=0x2e80ac, event=55(CC_EV_SIG_CALL_ENDED), par=33, par2=(nil))
Cisco CC:Ended
Cisco CC_callEventProc(), network signal call ended, bDECTCalltransfer=0, bDECTCallPickedup=0
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_CONNECTED, new state CC_CST_IDLE
Cisco [AUD]Release UCH node for AUD_LINE 2.
Cisco uchDisableNode(), Node 1 released ret=0
May 19 14:00:46 SPA232D sprvoip: cmd  16, NodeId 0  
May 19 14:00:46 SPA232D sprvoip: cmd - 16, response 20 
May 19 14:00:46 SPA232D sprvoip: cmd  14, NodeId 1  
May 19 14:00:46 SPA232D sprvoip: cmd - 14, response 18 
Cisco [AUD]UCH node 1 freed.
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco SIP_releaseAudioResources() entered ################!!!!!!!!!!!!!!!!!
Cisco Requesting call statistics...
May 19 14:00:46 SPA232D sprvoip: cmd  12, NodeId 1  
May 19 14:00:46 SPA232D sprvoip: cmd - 12, response 14 
May 19 14:00:46 SPA232D msgswitchd[232]:   MSGSWD RTCP Reqt len 12 Data 2,840,4713544,226
Cisco RTP TX stats updated for channel 1
Cisco RTP RX stats updated for channel 1
Cisco Call statistics updated.
Cisco AUD_releaseCallObj() call(0x3563e0)
Cisco [AUD]AUD_stopRtpTx(0x3563e0)
Cisco cordless_stop_rtp_tx(), Channel 1.
Cisco RTP channel 1 going from Bi-dir to Rx.
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_REC_ONLY, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 70ms, min 60ms, adapt 1
Cisco RTP channel 1 is now Rx.
Cisco [AUD]RTP Tx Down
Cisco [AUD]AUD_stopRtpRx(0x3563e0)
Cisco cordless_stop_rtp_rx(), Channel 1.
Cisco RTP channel 1 going from Rx to Idle.
Cisco RTP configuration:
Cisco   audio_mode RTP_MODE_INACTIVE, media_loop_level RTP_LOOP_LEVEL_NONE, dtmf2833numEndPakcets 3, opts 0x0
Cisco   Codec: duration 20, rx_pt_event 101, tx_pt_event 101, tx_pt 0 
Cisco          rx[0] 0 PCMU/8000, rx[1] 100 NSE/8000, rx[2] 112 encaprtp/8000
Cisco          rx[3] -1 , rx[4] -1 , rx[5] -1 
Cisco   Jib: max 70ms, min 60ms, adapt 1
Cisco RTP channel 1 is now Idle.
Cisco [AUD]RTP Down
Cisco [AUD]AUD_releaseRtp(0x3563e0)
Cisco cordless_stop_rtp(), releasing RTP channel:1
Cisco cordless_stop_rtp(), RTP session 1 stopped succussfully
Cisco uchRelChanAndEP(1, 3) 
Cisco uchDisconnectEpFromNode(), invalid node ID: -1
Cisco uchDisconnectEpFromNode(), invalid node ID: -1
Cisco [AUD]RTP channel released
Cisco [2:0]AUD Rel Call
Cisco SIP_releaseAudioResources(), CC_lineIsIdle(2)=1, gAudLine[2].bIvr=0, AUD_relUchNode????????????
Cisco [AUD]Release UCH node for AUD_LINE 2.
Cisco AUD_LINE 2 has no associated UCH node.
Cisco SIP_releaseAudioResources() exit   ################!!!!!!!!!!!!!!!!!
Cisco ##### RTP_SEQ_NUM_EVT 5477
Cisco +++ async event 8
Cisco +++ async event 8
Cisco FXO_eventProc(FXO_EV_VOIP_ENDED(8),2,0x0,0x0)
Cisco ++ voip ended; state = 5
Cisco uchStopVoipTone(), Stop Voip Tone EP -1
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco sysstatus_set_led_status_payton(), led_id: 3, statusCode:0, systemEvent: 0xfffe
Cisco FXO[2]:On Hook
Cisco FXO[2]:On Hook
Cisco CC_eventProc(), event: CC_EV_USR_ONHOOK(0x1), lid: 2, par: 0, par2: (nil)
Cisco AUD_ccEventProc: event 1 vid 2 par 0x0 par2 0x0
Cisco callEventProcTable[0] is cepIdleProc
Cisco cepIdleProc(lid=0, call=0x2e3804, event=11(CC_EV_USR_ENDCALL), par=0, par2=(nil))
Cisco cepIdleProc(), lid=0
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco FXO[2]:Stop CNDD
Cisco FXO[2]:Report:sesssion=4146e4b0;cst=0
Cisco FXO[2]:Report:sesssion=4146e4b0;cst=0
Cisco uchStopPstnTone(), Stop PSTN Tone lid 2 EP 0
Cisco [0]<<192.168.1.7:5061(409)
Cisco [0]<<192.168.1.7:5061(409)
SIP/2.0 200 OK

To: <sip:0214362410@127.0.0.1:5061>;tag=b2cd87b4c8ec345di2

From: "VoipMove" <sip:XXXYYYXXX@sip.voipmove.com>;tag=26f0185e89dcb68o0

Call-ID: b1aa9c16-df425b10@192.168.1.7

CSeq: 102 BYE

Via: SIP/2.0/UDP 192.168.1.7:5060;branch=z9hG4bK-e4f7db15

Server: Cisco/SPA232D-1.4.1(002_282)

P-RTP-Stat: PS=519,OS=83040,PR=506,OR=80960,PL=0,JI=0,LA=0,DU=11,EN=G711u,DE=G711u

Content-Length: 0



Cisco 
Cisco 
Cisco SIP_tsClientEventProc(event: 28) state = 1
Cisco DLG Terminated 4b6e0c
Cisco SIP_sessDlgEventProc: event: 41(SIP_EV_DLG_TERM), ucState: 4
Cisco Sess Terminated
Cisco SIP_releaseAudioResources() entered ################!!!!!!!!!!!!!!!!!
Cisco SIP_releaseAudioResources(), CC_lineIsIdle(0)=1, gAudLine[0].bIvr=0, AUD_relUchNode????????????
Cisco [AUD]Release UCH node for AUD_LINE 0.
Cisco AUD_LINE 0 has no associated UCH node.
Cisco SIP_releaseAudioResources() exit   ################!!!!!!!!!!!!!!!!!
Cisco TS Detached
May 19 14:00:46 SPA232D sprvoip:  ch_GetChannelAndEP(): 
May 19 14:00:46 SPA232D sprvoip: cmd - 22, response 38 
May 19 14:00:46 SPA232D sprvoip: cmd - 9, response 32 
Cisco Set QoS succeed
Cisco SIP_tsClientEventProc(event: 3) state = 3
Cisco SIP_tsClientEventProc(event: 9) state = 3
Cisco cordless_main() running...... 3
Cisco uchAppCb(), Event 63 received EP 0 lid 2
Cisco CH_ASYNC_EVT_SLC received on EP 0 eventdate 0x102 transition SLC_ON in direction UCH_SLC_VOIP_PATH
May 19 14:01:15 SPA232D sprvoip: cmd - 9, response 63 
Cisco uchAppCb(), Event 63 received EP 0 lid 2
Cisco CH_ASYNC_EVT_SLC received on EP 0 eventdate 0x101 transition SLC_ON in direction UCH_SLC_FXO_PATH
May 19 14:01:17 SPA232D sprvoip: cmd - 9, response 63 
Cisco Tmr J Fires
Cisco DLG Terminated 4b6d78
Cisco SIP_sessDlgEventProc: event: 41(SIP_EV_DLG_TERM), ucState: 4
Cisco Sess Terminated
Cisco SIP_releaseAudioResources() entered ################!!!!!!!!!!!!!!!!!
Cisco SIP_releaseAudioResources(), CC_lineIsIdle(2)=1, gAudLine[2].bIvr=0, AUD_relUchNode????????????
Cisco [AUD]Release UCH node for AUD_LINE 2.
Cisco AUD_LINE 2 has no associated UCH node.
Cisco SIP_releaseAudioResources() exit   ################!!!!!!!!!!!!!!!!!
Cisco TS Detached
Cisco CC:Clean Up
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 0: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 1: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco NEW_CALL_STATE(), call 2: old state = CC_CST_IDLE, new state CC_CST_IDLE
Cisco --- OBJ POOL STAT ---
Cisco OP:TIMEOU =  66 (120   52)   Cisco OP:SIPCOR =   0 (  1   28)
Cisco OP:XMNODE = 1024 (1024  112)   Cisco OP:SIPCTS =  96 ( 96  964)
Cisco OP:SIPSTS =  64 ( 64 6428)   Cisco OP:SIPAUS =  14 ( 18  680)
Cisco OP:SIPDLG =  20 ( 20  148)   Cisco OP:SIPSES =  22 ( 22 9384)
Cisco OP:SIPREG =  22 ( 24  488)   Cisco OP:SIPRETRY =  32 ( 32   16)
Cisco OP:SIPLIN =   0 ( 13  140)   Cisco OP:SUBDLG =  13 ( 13 6452)
Cisco OP:STUNTS =  16 ( 16   68)   Cisco OP:SIPCTI =   1 (  1 7416)
Cisco 
Cisco cordless_main() running...... 3
Cisco cordless_main() running...... 3
Cisco cordless_main() running...... 3
Cisco cordless_main() running...... 3
Cisco cordless_main() running...... 3
May 19 14:03:56 SPA232D syslog-ng[148]: STATS: dropped 0
Cisco 
################# CC: running... ############
Cisco cordless_main() running...... 3
Cisco cordless_main() running...... 3