sh run Building configuration... Current configuration : 3245 bytes ! version 12.4 no service pad service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname XXXX ! boot-start-marker boot-end-marker ! enable secret ! no aaa new-model ! resource policy ! ! ! ip cef ! ! ! ! class-map match-any SIP-calls match access-group 102 match access-group 103 ! ! policy-map VoIP class SIP-calls priority 128 class class-default fair-queue ! ! ! ! ! interface Loopback0 description Loopback di NAT ip address 6x.xxx.xxx.xxx 255.xxx.xxx.xxx ! interface Ethernet0 ip address 192.168.0.253 255.255.255.0 ip nat inside no ip virtual-reassembly hold-queue 100 out ! interface Ethernet2 no ip address shutdown hold-queue 100 out ! interface ATM0 no ip address no atm auto-configuration no atm ilmi-keepalive no atm address-registration no atm ilmi-enable dsl operating-mode auto hold-queue 224 in ! interface ATM0.35 point-to-point ip address 2xx.xxx.xxx.xxx 255.xxx.xxx.xxx ip nat outside no ip virtual-reassembly no snmp trap link-status pvc 8/35 vbr-nrt 800 256 oam-pvc manage encapsulation aal5snap service-policy output VoIP ! ! interface FastEthernet1 duplex auto speed auto ! interface FastEthernet2 duplex auto speed auto ! interface FastEthernet3 duplex auto speed auto ! interface FastEthernet4 duplex auto speed auto ! ip route 0.0.0.0 0.0.0.0 ATM0.35 no ip http server no ip http secure-server ! no ip nat service sip tcp port 5060 no ip nat service sip udp port 5060 ip nat inside source list 101 interface Loopback0 overload ! access-list 101 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit udp any any eq 5060 access-list 103 permit udp any range 60000 65000 ! control-plane ! ! line con 0 password login no modem enable line aux 0 password login line vty 0 4 password login ! scheduler max-task-time 5000