******************************************************************************* Cisco System ROMMON, Version 1.0.12, RELEASE SOFTWARE Copyright (c) 1994-2019 by Cisco Systems, Inc. Compiled Mon 06/17/2019 16:23:23.36 by builder ******************************************************************************* Current image running: Boot ROM0 Last reset cause: SwitchOff (0x00000100) DIMM_1/1 : Present DIMM_2/1 : Absent Platform FPR-2110 with 16384 MBytes of main memory WARNING: This board is using a temporary MAC address. WARNING: The temporary MAC address override value = 00:11:22:33:44:28 WARNING: Please clear this value to use the programmed MAC address. WARNING: Use the following two CLI commands: WARNING: unset MACADDR WARNING: sync BIOS has been successfully locked !! MAC Address: 54:88:de:76:8e:80 Use BREAK or ESC to interrupt boot. Use SPACE to begin boot immediately. Boot interrupted. rommon 1 > set ADDRESS=192.168.45.45 NETMASK=255.255.255.0 GATEWAY=192.168.45.10 SERVER=192.168.45.10 IMAGE=cisco-asa-fp2k.9.12.4.35.SPA CONFIG= PS1="rommon ! > " MACADDR=00:11:22:33:44:28 rommon 2 > sync rommon 3 > tftp -b Enable boot bundle: tftp_reqsize = 268435456 ADDRESS: 192.168.45.45 NETMASK: 255.255.255.0 GATEWAY: 192.168.45.10 SERVER: 192.168.45.10 IMAGE: cisco-asa-fp2k.9.12.4.35.SPA MACADDR: 54:88:de:76:8e:80 VERBOSITY: Progress RETRY: 40 PKTTIMEOUT: 7200 BLKSIZE: 1460 CHECKSUM: Yes PORT: GbE/1 PHYMODE: Auto Detect link up Receiving cisco-asa-fp2k.9.12.4.35.SPA from 192.168.45.10!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! File reception completed. Boot buffer bigbuf=7e13e3d8 Boot image size = 170238592 (0xa25a280) bytes [image size] 170238592 [MD5 signature] 61f3296fdd4dec3fadf33e857bfe52f7 +-------------------------------------------------------------------+ +------------------------- SUCCESS ---------------------------------+ +-------------------------------------------------------------------+ | | | LFBFF signature authentication passed !!! | | | +-------------------------------------------------------------------+ LFBFF signature verified. +-------------------------------------------------------------------+ +------------------------- SUCCESS ---------------------------------+ +-------------------------------------------------------------------+ | | | LFBFF controller type check passed !!! | | | +-------------------------------------------------------------------+ INIT: version 2.88 booting Starting udev Hardware tweak APPLIED: Disable SATA Throttle.1 Hardware tweak APPLIED: Disable SATA Throttle.2 Configuring network interfaces... done. Populating dev cache /etc/init.d/kp/start_poshd.sh: line 45: 10#version: value too great for base (error token is "10#version") Primary SSD discovered eMMC Flash not detected; retrying fsck from util-linux 2.26.2 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 68/61056 files, 8304/244224 blocks fsck(/dev/sda1) returned 0 fsck from util-linux 2.26.2 [/sbin/fsck.ext3 (1) -- /dev/sda2] fsck.ext3 -a /dev/sda2 /dev/sda2: clean, 52/61056 files, 8331/243968 blocks fsck(/dev/sda2) returned 0 fsck from util-linux 2.26.2 [/sbin/fsck.ext3 (1) -- /dev/sda3] fsck.ext3 -a /dev/sda3 /dev/sda3: clean, 11/732960 files, 85967/2929664 blocks fsck(/dev/sda3) returned 0 fsck from util-linux 2.26.2 [/sbin/fsck.vfat (1) -- /dev/sdb1] fsck.vfat -a /dev/sdb1 fsck.fat 3.0.28 (2015-05-16) /dev/sdb1: 8 files, 9/1920085 clusters fsck(/dev/sdb1) returned 0 useradd: warning: the home directory already exists. Not copying any file from skel directory into it. useradd: warning: the home directory already exists. Not copying any file from skel directory into it. useradd: warning: the home directory already exists. Not copying any file from skel directory into it. useradd: warning: the home directory already exists. Not copying any file from skel directory into it. useradd: warning: the home directory already exists. Not copying any file from skel directory into it. useradd: warning: the home directory already exists. Not copying any file from skel directory into it. FIPS POST Test Script NOTICE: The FIPS POST is not run because the FIPS feature is not enabled Running postinst /etc/rpm-postinsts/100-dnsmasq... INIT: Entering runlevel: 3 Starting system message bus: dbus. Stopping all devices. Starting all devices. Checking status of all devices. There is 0 QAT acceleration device(s) in the system: ip6tables: Applying firewall rules: [ OK ] iptables: Applying firewall rules: [ OK ] Starting OpenBSD Secure Shell server: sshd done. Starting rpcbind daemon...done. starting statd: done Starting Advanced Configuration and Power Interface daemon: acpid. acpid: starting up with netlink and the input layer acpid: 1 rule loaded acpid: waiting for events: event logging is off starting 8 nfsd kernel threads: done starting mountd: done Starting ntpd: done Starting internet superserver: xinetd. No makedumpfile found. Starting Octeon NPU ... Starting Octeon NPU ... success Starting fan control daemon: fancontrol... done. INFO: beginning of manager_install INFO: deleting unnecessary xml file..!! INFO: deleted unnecessary xml file..!! INFO: disaster recovery - use default service mgr INFO: manager_post_install ... INFO: manager_post_install: boot file does not exist INFO: manager_post_install: fxmgr= chmgr= update=false INFO: manager_post_install: Linking libraries ... INFO: manager_post_install: Linking binaries ... INFO: Trying to add iptables and ip6tables rules ... INFO: Set up Application Diagnostic Interface ... INFO: Configure management interface ... INFO: Configure system files ... INFO: System Name is: firepower-2110 Starting sensors logging daemon: sensord... done. INFO: file /mnt/boot/.boot_npu does not exist INFO: manager_startup: setting up fxmgr apache ... INFO: manager_startup: Start manager httpd setup... /bin/rm: cannot remove '/tmp/openssl.conf': No such file or directory INFO: manager_startup: reset httpd app config to default httpdRegister INFO: [httpd.2732 -4 192.168.45.45 -n localhost] httpdRegister INFO: Starting httpd setup/registration... httpdRegister INFO: Completed httpd setup/registration! INFO: httpdRegister [httpd.2732 script exit] INFO: manager_startup: Completed manager httpd setup! Starting crond: OK FTD /opt/cisco/csp/cores 31457280 Starting Octeon Serial Logd... Starting Octeon Serial Logd... success INFO: System Disk /dev/sda present. Status: Inoperable. System Disk /dev/sda is not found. Moving blade into fail-safe mode hostname: invalid option -- 'l' Usage: hostname [-v] {hostname|-F file} set hostname (from file) domainname [-v] {nisdomain|-F file} set NIS domainname (from file) hostname [-v] [-d|-f|-s|-a|-i|-y|-n] display formatted name hostname [-v] display hostname hostname -V|--version|-h|--help print info and exit dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y -s, --short short host name -a, --alias alias names -i, --ip-address addresses for the hostname -f, --fqdn, --long long host name (FQDN) -d, --domain DNS domain name -y, --yp, --nis NIS/YP domainname -F, --file read hostname or NIS domainname from given file This command can read or set the hostname or the NIS domainname. You can also read the DNS domain or the FQDN (fully qualified domain name). Unless you are using bind or NIS for host lookups you can change the FQDN (Fully Qualified Domain Name) and the DNS domain name (which is part of the FQDN) in the /etc/hosts file. error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') error(2, 'No such file or directory') Cisco FPR Series Security Appliance firepower-2110 login: ad Waiting for Application infrastructure to be ready... min Password: Verifying the signature of the Application image... Last login: Fri Sep 1 13:47:53 UTC 2023 on ttyS0 Successful login attempts for user 'admin' : 2 Cisco Firepower Extensible Operating System (FX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2009-2019, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the "GNU General Public License, version 3" provided with ABSOLUTELY NO WARRANTY under the terms of "GNU General Public License, Version 3", available here: http://www.gnu.org/licenses/gpl.html. See User Manual (''Licensing'') for details. Certain components of this software are licensed under the "GNU General Public License, version 2" provided with ABSOLUTELY NO WARRANTY under the terms of "GNU General Public License, version 2", available here: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html. See User Manual (''Licensing'') for details. Certain components of this software are licensed under the "GNU LESSER GENERAL PUBLIC LICENSE, version 3" provided with ABSOLUTELY NO WARRANTY under the terms of "GNU LESSER GENERAL PUBLIC LICENSE" Version 3", available here: http://www.gnu.org/licenses/lgpl.html. See User Manual (''Licensing'') for details. Certain components of this software are licensed under the "GNU Lesser General Public License, version 2.1" provided with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser General Public License, version 2", available here: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. See User Manual (''Licensing'') for details. Certain components of this software are licensed under the "GNU Library General Public License, version 2" provided with ABSOLUTELY NO WARRANTY under the terms of "GNU Library General Public License, version 2", available here: http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html. See User Manual (''Licensing'') for details. firepower-2110# scope firmware Software Error: Exception during execution: [Error: Timed out communicating with DME] INIT: showStopping all devices. Stopping Octeon Serial Logd... Stopping Octeon Serial Logd... success Stopping OpenBSD Secure Shell server: sshd stopped /usr/sbin/sshd (pid 1805) done. Stopping Octeon NPU ... Stopping Octeon NPU ... unreachable Stopping Advanced Configuration and Power Interface daemon: stopped /usr/sbin/acpid (pid 1817) acpid. Stopping system message bus: dbus. stopping mountd: done stopping nfsd: .acpid: exiting done Stopping ntpd: stopped process in pidfile '/var/run/ntp.pid' (pid 1846) done Stopping internet superserver: xinetd. stopping statd: done Failed to stop kdump! Stopping crond: OK Stopping rpcbind daemon... done. Stopping fan control daemon: fancontrol... no process in pidfile '/var/run/fancontrol.pid' found; none killed done. Stopping sensors logging daemon: sensord... stopped /usr/sbin/sensord (pid 2689) done. Deconfiguring network interfaces... done. ip6tables: Setting chains to policy ACCEPT: filter [ OK ] ip6tables: Flushing firewall rules: [ OK ] ip6tables: Unloading modules: [ OK ] iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Flushing firewall rules: [ OK ] iptables: Unloading modules: [ OK ] SSP-Security-Module is shutting down ... Sat Sep 2 09:03:31 UTC 2023 SHUTDOWN WARNING: Beginning System Shutdown request for CSP Apps Sat Sep 2 09:03:31 UTC 2023 SHUTDOWN WARNING: Continue System Shutdown request for CSP Apps Sat Sep 2 09:03:31 UTC 2023 SHUTDOWN WARNING: Nothing to do for Apps-Services-Down Sat Sep 2 09:03:31 UTC 2023 FPR-1xxx platform rebooting ... Note: SIGKILL_ALL will be triggered after after 0 + 2 secs ... Sending ALL processes the KILL signal ... Error: poshd was not running... Starting ... /etc/init.d/kp/start_poshd.sh: line 45: 10#version: value too great for base (error token is "10#version") Sat Sep 2 09:03:33 UTC 2023 Deactivating swap... Unmounting local filesystems... Rebooting... [ 119.229638] reboot: Restarting system ******************************************************************************* Cisco System ROMMON, Version 1.0.12, RELEASE SOFTWARE Copyright (c) 1994-2019 by Cisco Systems, Inc. Compiled Mon 06/17/2019 16:23:23.36 by builder ******************************************************************************* Current image running: Boot ROM0 Last reset cause: ResetRequest (0x00001000) DIMM_1/1 : Present DIMM_2/1 : Absent Platform FPR-2110 with 16384 MBytes of main memory WARNING: This board is using a temporary MAC address. WARNING: The temporary MAC address override value = 00:11:22:33:44:28 WARNING: Please clear this value to use the programmed MAC address. WARNING: Use the following two CLI commands: WARNING: unset MACADDR WARNING: sync BIOS has been successfully locked !! MAC Address: 54:88:de:76:8e:80 Use BREAK or ESC to interrupt boot. Use SPACE to begin boot immediately. Directory .boot_string not found kpark_boot: Unable to load .boot_string Attempt autoboot: "boot disk0:/installables/switch" boot: cannot determine first file name on device "disk0:/installables/switch/" Attempt autoboot: "boot disk0:" boot: cannot determine first file name on device "disk0:/" autoboot: All boot attempts have failed, will retry three times ! autoboot: current retry count: 1 autoboot: Restarting the system. ******************************************************************************* Cisco System ROMMON, Version 1.0.12, RELEASE SOFTWARE Copyright (c) 1994-2019 by Cisco Systems, Inc. Compiled Mon 06/17/2019 16:23:23.36 by builder ******************************************************************************* Current image running: Boot ROM0 Last reset cause: LocalSoft (0x00000002) DIMM_1/1 : Present DIMM_2/1 : Absent Platform FPR-2110 with 16384 MBytes of main memory WARNING: This board is using a temporary MAC address. WARNING: The temporary MAC address override value = 00:11:22:33:44:28 WARNING: Please clear this value to use the programmed MAC address. WARNING: Use the following two CLI commands: WARNING: unset MACADDR WARNING: sync BIOS has been successfully locked !! MAC Address: 54:88:de:76:8e:80 Use BREAK or ESC to interrupt boot. Use SPACE to begin boot immediately. Directory .boot_string not found kpark_boot: Unable to load .boot_string Attempt autoboot: "boot disk0:/installables/switch" boot: cannot determine first file name on device "disk0:/installables/switch/" Attempt autoboot: "boot disk0:" boot: cannot determine first file name on device "disk0:/" autoboot: All boot attempts have failed, will retry three times ! autoboot: current retry count: 2 autoboot: Restarting the system. ******************************************************************************* Cisco System ROMMON, Version 1.0.12, RELEASE SOFTWARE Copyright (c) 1994-2019 by Cisco Systems, Inc. Compiled Mon 06/17/2019 16:23:23.36 by builder ******************************************************************************* Current image running: Boot ROM0 Last reset cause: LocalSoft (0x00000002) DIMM_1/1 : Present DIMM_2/1 : Absent Platform FPR-2110 with 16384 MBytes of main memory WARNING: This board is using a temporary MAC address. WARNING: The temporary MAC address override value = 00:11:22:33:44:28 WARNING: Please clear this value to use the programmed MAC address. WARNING: Use the following two CLI commands: WARNING: unset MACADDR WARNING: sync BIOS has been successfully locked !! MAC Address: 54:88:de:76:8e:80 Use BREAK or ESC to interrupt boot. Use SPACE to begin boot immediately. Directory .boot_string not found kpark_boot: Unable to load .boot_string Attempt autoboot: "boot disk0:/installables/switch" boot: cannot determine first file name on device "disk0:/installables/switch/" Attempt autoboot: "boot disk0:" boot: cannot determine first file name on device "disk0:/" autoboot: All boot attempts have failed, will retry three times ! autoboot: current retry count: 3 autoboot: Restarting the system. ******************************************************************************* Cisco System ROMMON, Version 1.0.12, RELEASE SOFTWARE Copyright (c) 1994-2019 by Cisco Systems, Inc. Compiled Mon 06/17/2019 16:23:23.36 by builder ******************************************************************************* Current image running: Boot ROM0 Last reset cause: LocalSoft (0x00000002) DIMM_1/1 : Present DIMM_2/1 : Absent Platform FPR-2110 with 16384 MBytes of main memory WARNING: This board is using a temporary MAC address. WARNING: The temporary MAC address override value = 00:11:22:33:44:28 WARNING: Please clear this value to use the programmed MAC address. WARNING: Use the following two CLI commands: WARNING: unset MACADDR WARNING: sync BIOS has been successfully locked !! MAC Address: 54:88:de:76:8e:80 Use BREAK or ESC to interrupt boot. Use SPACE to begin boot immediately. Directory .boot_string not found kpark_boot: Unable to load .boot_string Attempt autoboot: "boot disk0:/installables/switch" boot: cannot determine first file name on device "disk0:/installables/switch/" Attempt autoboot: "boot disk0:" boot: cannot determine first file name on device "disk0:/" autoboot: All boot attempts have failed, will retry three times ! autoboot: retry count: 4 is over the limit, system will stop autoboot rommon 1 >