=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.11.19 18:00:15 =~=~=~=~=~=~=~=~=~=~=~= Cat6k-Sup720/SP processor with 524288 Kbytes of main memory Autoboot: failed, BOOT string is empty Autoboot executing command: "boot " Initializing ATA monitor library... string is bootdisk:c7600s72033-advipservicesk9-mz.122-33.SRB1.bin Loading image, please wait ... Initializing ATA monitor library... Self extracting the image... [OK] Self decompressing the image : ###################################################################################################################################### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, c7600s72033_sp Software (c7600s72033_sp-ADVIPSERVICESK9-M), Version 12.2(33)SRB1, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Fri 01-Jun-07 09:32 by prod_rel_team Image text-base: 0x401012FC, data-base: 0x418713D0 *Nov 19 10:49:30.535: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output. *Nov 19 10:49:18.435: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor *Nov 19 10:49:30.535: %OIR-SP-6-CONSOLE: Changing console ownership to route processor System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2009 by cisco Systems, Inc. Cat6k-Sup720/RP platform with 524288 Kbytes of main memory Download Start !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Download Completed! Booting the image. Self decompressing the image : ################################################################################################################################################################################################################################################################################################ [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB1, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Fri 01-Jun-07 09:23 by prod_rel_team Image text-base: 0x401012FC, data-base: 0x4370EED0 This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco CISCO7613 (R7000) processor (revision 1.1) with 458720K/65536K bytes of memory. Processor board ID SAL113708T4 SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 1 Enhanced FlexWAN controller (8 Serial). 1 SIP-200 controller (2 Channelized OC3/STM-1). 1 SSC-400 controller (1 IPSEC). 1 Virtual Ethernet interface 68 Gigabit Ethernet interfaces 8 Serial interfaces 2 Channelized STM-1 ports 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K).WARNING: module 4 type is unknown Warning: enabling multiple VLAN interfaces may result in traffic bypassing the FWSM - use with caution!Please note slot 4 is empty, the configuration is accepted. SETUP: new interface GigabitEthernet3/0/1 placed in "shutdown" state SETUP: new interface GigabitEthernet3/0/2 placed in "shutdown" state % There may not be enough space available to collect the complete crashinfo % It would be advisable to have 282836 bytes free space on bootflash:crashinfo Press RETURN to get started! *Nov 19 10:50:24.859: %C6K_PLATFORM-5-LESS_SPACE: May not have enough space to save the crash info. on flash of Router on module: 7 *Nov 19 10:50:27.611: RP: Currently running ROMMON from S (Gold) region *Nov 19 16:20:40 IST: %SYS-6-CLOCKUPDATE: System clock has been updated from 10:50:40 UTC Mon Nov 19 2018 to 16:20:40 IST Mon Nov 19 2018, configured from console by console. *Nov 19 16:20:40 IST: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan *Nov 19 16:20:43 IST: %SYS-5-CONFIG_I UPSWAN-GKP-CORE>: Configured from memory by console *Nov 19 16:20:45 IST: %SYS-5-RESTART: System restarted -- Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB1, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Fri 01-Jun-07 09:23 by prod_rel_team *Nov 19 16:20:45 IST: %SSH-5-ENABLED: SSH 1.99 has been enabled *Nov 19 16:20:45 IST: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE: Replication Mode Change Detected. Current system replication mode is Ingress *Nov 19 16:20:45 IST: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.220.0.5 port 514 started - CLI initiated *Nov 19 16:20:45 IST: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.220.2.2 port 514 started - CLI initiated *Nov 19 16:20:46 IST: %SNMP-5-COLDSTART: SNMP agent on host UPSWAN-GKP-CORE is undergoing a cold start *Nov 19 10:49:30.819: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. Firmware compiled 05-Jan-07 06:43 by integ Build [100] *Nov 19 10:50:35.827: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan *Nov 19 10:50:36.247: SP: SP: Currently running ROMMON from S (Gold) region *Nov 19 10:50:39.671: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 10:50:45.598: %SYS-SP-5-RESTART: System restarted -- Cisco IOS Software, c7600s72033_sp Software (c7600s72033_sp-ADVIPSERVICESK9-M), Version 12.2(33)SRB1, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Fri 01-Jun-07 09:32 by prod_rel_team *Nov 19 10:50:46 UTC: %SYS-SP-6-BOOTTIME: Time taken to reboot after reload = 185 seconds *Nov 19 10:50:47 UTC: %OIR-SP-6-INSPS: Power supply inserted in slot 1 *Nov 19 10:50:47 UTC: %C6KPWR-SP-4-PSOK: power supply 1 turned on. *Nov 19 10:50:48 UTC: %OIR-SP-6-INSPS: Power supply inserted in slot 2 *Nov 19 10:50:48 UTC: %C6KPWR-SP-2-PSFAIL: power supply 2 output failed. *Nov 19 10:50:48 UTC: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in power-redundancy mode, system is operating on one power supply. *Nov 19 16:20:49 IST: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in effect *Nov 19 16:21:02 IST: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 7. *Nov 19 16:21:02 IST: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 7 became active. *Nov 19 16:21:03 IST: %DIAG-SP-6-RUN_MINIMUM: Module 7: Running Minimal Diagnostics... *Nov 19 16:21:25 IST: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/0 *Nov 19 16:21:25 IST: %OIR-6-REMCARD: Card removed from slot 1, interfaces disabled *Nov 19 16:21:27 IST: %OIR-6-REMCARD: Card removed from slot 2, interfaces disabled *Nov 19 16:21:27 IST: %OIR-6-REMCARD: Card removed from slot 2, interfaces disabled *Nov 19 16:21:27 IST: %OIR-6-REMCARD: Card removed from slot 3, interfaces disabled *Nov 19 16:21:27 IST: %DIAG-SP-6-DIAG_OK: Module 7: Passed Online Diagnostics *Nov 19 16:21:29 IST: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics... *Nov 19 16:21:29 IST: %OIR-SP-6-INSCARD: Card inserted in slot 7, interfaces are now online SLOT 1: *Nov 19 10:51:29.464: %FABRIC_INTF_ASIC-5-FABRICSYNC_DONE: Fabric ASIC 0 Channel 0: Fabric sync done. *Nov 19 16:21:29 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:21:31 IST: %DIAG-SP-3-MAJOR: Module 1: Online Diagnostics detected a Major Error. Please use 'show diagnostic result ' to see test results. *Nov 19 16:21:31 IST: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: BusConnectivityTest failed *Nov 19 16:21:31 IST: %OIR-SP-3-LC_FAILURE: Module 1 has Major online diagnostic failure, Card will be powered reset to re-run diagnostic. Please check bootflash diaginfo file for previous detailed diagnostic result. *Nov 19 16:21:31 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset) *Nov 19 16:21:35 IST: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 2/1 *Nov 19 16:21:37 IST: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 3/0 *Nov 19 16:21:39 IST: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics... *Nov 19 16:21:42 IST: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics *Nov 19 16:21:42 IST: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are now online *Nov 19 16:21:49 IST: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 2/0 SLOT 2/0: *Mar 1 00:00:16.835: %FABRIC_INTF_ASIC-5-FABRICSYNC_DONE: Fabric ASIC 0 Channel 0: Fabric sync done. *Nov 19 16:21:52 IST: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics... *Nov 19 16:21:54 IST: %ONLINE-SP-6-INITFAIL: Module 5: Failed to synchronize Port asic *Nov 19 16:21:54 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set off (Module Failed SCP dnld) *Nov 19 16:21:54 IST: %ONLINE-SP-6-INITFAIL: Module 6: Failed to synchronize Port asic SLOT 3: *Mar 1 00:00:21 UTC: %FABRIC_INTF_ASIC-5-FABRICSYNC_DONE: Fabric ASIC 0 Channel 0: Fabric sync done. *Nov 19 16:21:54 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Module Failed SCP dnld) *Nov 19 16:21:57 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:21:58 IST: %DIAG-SP-6-RUN_MINIMUM: Module 9: Running Minimal Diagnostics... SLOT 1: *Mar 1 00:00:05.779: %FABRIC_INTF_ASIC-5-FABRICSYNC_DONE: Fabric ASIC 0 Channel 0: Fabric sync done. *Nov 19 16:22:16 IST: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics... *Nov 19 16:22:22 IST: %DIAG-SP-3-MAJOR: Module 2: Online Diagnostics detected a Major Error. Please use 'show diagnostic result ' to see test results. *Nov 19 16:22:22 IST: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 2: BusConnectivityTest failed *Nov 19 16:22:22 IST: %OIR-SP-3-LC_FAILURE: Module 2 has Major online diagnostic failure, Card will be powered reset to re-run diagnostic. Please check bootflash diaginfo file for previous detailed diagnostic result. *Nov 19 16:22:22 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset) *Nov 19 16:22:23 IST: %DIAG-SP-3-MAJOR: Module 1: Online Diagnostics detected a Major Error. Please use 'show diagnostic result ' to see test results. *Nov 19 16:22:23 IST: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: BusConnectivityTest failed *Nov 19 16:22:23 IST: %OIR-SP-3-LC_FAILURE: Module 1 has Major online diagnostic failure, Card will be powered reset to re-run diagnostic. Please check bootflash diaginfo file for previous detailed diagnostic result. *Nov 19 16:22:23 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset) *Nov 19 16:22:31 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:22:42 IST: %ONLINE-SP-6-INITFAIL: Module 5: Failed to synchronize Port asic *Nov 19 16:22:42 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set off (Module Failed SCP dnld) *Nov 19 16:22:55 IST: %ONLINE-SP-6-INITFAIL: Module 6: Failed to synchronize Port asic *Nov 19 16:22:55 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Module Failed SCP dnld) *Nov 19 16:22:57 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds SLOT 1: *Mar 1 00:00:05.771: %FABRIC_INTF_ASIC-5-FABRICSYNC_DONE: Fabric ASIC 0 Channel 0: Fabric sync done. *Nov 19 16:23:09 IST: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics... *Nov 19 16:23:28 IST: %ONLINE-SP-6-INITFAIL: Module 5: Failed to synchronize Port asic *Nov 19 16:23:28 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set off (Module Failed SCP dnld) SLOT 2/0: *Mar 1 00:00:16.823: %FABRIC_INTF_ASIC-5-FABRICSYNC_DONE: Fabric ASIC 0 Channel 0: Fabric sync done. *Nov 19 16:23:31 IST: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics... *Nov 19 16:23:32 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds SLOT 3: *Mar 1 00:02:10 UTC: %SPA_IPSEC-3-BOOT_FAIL: SPA-IPSEC-2G[3/0]: POST Timeout. *Nov 19 16:23:49 IST: %SPA_OIR-3-RECOVERY_RELOAD: subslot 3/0: Attempting recovery by reloading SPA *Nov 19 16:23:54 IST: %ONLINE-SP-6-INITFAIL: Module 6: Failed to synchronize Port asic *Nov 19 16:23:54 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Module Failed SCP dnld) *Nov 19 16:23:57 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:24:15 IST: %ONLINE-SP-6-INITFAIL: Module 5: Failed to synchronize Port asic *Nov 19 16:24:15 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set off (Module Failed SCP dnld) UPSWAN-GKP-CORE> *Nov 19 16:24:31 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:24:54 IST: %ONLINE-SP-6-INITFAIL: Module 6: Failed to synchronize Port asic *Nov 19 16:24:54 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Module Failed SCP dnld) *Nov 19 16:24:56 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:25:01 IST: %ONLINE-SP-6-INITFAIL: Module 5: Failed to synchronize Port asic *Nov 19 16:25:01 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set off (Module Failed SCP dnld) *Nov 19 16:25:30 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:25:53 IST: %ONLINE-SP-6-INITFAIL: Module 6: Failed to synchronize Port asic *Nov 19 16:25:53 IST: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Module Failed SCP dnld) SLOT 3: *Mar 1 00:04:22 UTC: %SPA_IPSEC-3-BOOT_FAIL: SPA-IPSEC-2G[3/0]: POST Timeout. *Nov 19 16:25:56 IST: %C6KERRDETECT-SP-2-SWBUSSTALL: The switching bus is experiencing stall for 3 seconds *Nov 19 16:26:00 IST: %SPA_OIR-3-RECOVERY_RELOAD: subslot 3/0: Attempting recovery by reloading SPA UPSWAN-GKP-CORE> UPSWAN-GKP-CORE> UPSWAN-GKP-CORE> UPSWAN-GKP-CORE> UPSWAN-GKP-CORE> UPSWAN-GKP-CORE>en Password: