ip vrf mpls
 description VRF Instance For mpls VPN
 rd 20:1
 route-target export 20:1
 route-target import 20:1
 route-target import 10:1
 mdt default 239.232.0.17
!
ip multicast-routing 
ip multicast-routing vrf mpls 

interface Loopback0
 description Logical Interface In Global Table
 ip address 203.194.30.63 255.255.255.255
 ip pim sparse-mode
!         
interface Loopback3
 ip vrf forwarding mpls
 ip address 172.17.20.1 255.255.255.255
 ip pim sparse-dense-mode
 ip igmp join-group 239.232.0.17
!         
interface GigabitEthernet0/1
 description To DLS01-KENT-SYD
 ip address 203.220.112.91 255.255.255.254
 ip pim sparse-mode
 ip ospf message-digest-key 1 md5 7 005500120B5D522E2C006B
 ip ospf network point-to-point
 ip ospf dead-interval minimal hello-multiplier 5
 ip ospf mtu-ignore
 load-interval 30
 duplex full
 speed 100
 media-type rj45
 no negotiation auto
 tag-switching ip
!
router bgp 20
 bgp router-id 203.194.30.63
 bgp log-neighbor-changes
 neighbor 203.194.30.62 remote-as 20
 neighbor 203.194.30.62 description rrv01-kent-syd-test
 neighbor 203.194.30.62 update-source Loopback0
!
address-family vpnv4
 neighbor 203.194.30.62 activate
 neighbor 203.194.30.62 send-community both
 exit-address-family
!
address-family ipv4 vrf mpls
 redistribute connected
 no auto-summary
 no synchronization
 exit-address-family

ip pim ssm range ssm-range
!
access-list standard ssm-range permit any log