2017-05-30 14:29:06:0120 CP-7925G syslog.info syslogd started: BusyBox v1.00 (2005.04.27-18:24+0000)
2017-05-30 14:29:06:0120 CP-7925G syslog.info syslogd-pid=146
2017-05-30 14:29:06:0180 CP-7925G user.debug kernel: klogd console log level is set to 5
2017-05-30 14:29:06:0190 CP-7925G user.debug kernel: setting klogd log level to 3
2017-05-30 14:29:06:0190 CP-7925G user.notice kernel: klogd started: BusyBox v1.00 (2005.04.27-18:24+0000)
2017-05-30 14:29:06:0340 CP-7925G user.debug theseus-syslogger: syslogd_pid=146, klogd_pid=147
2017-05-30 14:29:06:0400 CP-7925G user.info theseus-syslogger: Both syslogd and klogd are up. Sending sigcont to init
2017-05-30 14:29:06:0400 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [145] 
2017-05-30 14:29:06:0400 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(145)
2017-05-30 14:29:06:0400 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/syslogger[145] 
2017-05-30 14:29:06:0400 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/syslogger 
2017-05-30 14:29:06:0400 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/syslogger done 
2017-05-30 14:29:06:0400 CP-7925G user.debug Cisco7925-Init: Updating pid to action /voice/wman -m -w -z -p VeryLongDoze  pid =148 
2017-05-30 14:29:06:0400 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /voice/wman -m -w -z -p VeryLongDoze pid=148 
2017-05-30 14:29:06:0400 CP-7925G user.debug Cisco7925-Init: forked process pid=148
2017-05-30 14:29:06:0410 CP-7925G user.info Cisco7925-Init:  Starting               /voice/wman  , pid=148 
2017-05-30 14:29:06:0410 CP-7925G user.debug wman: File: ../dil/wlanmgr_ipc.c Line: 30 Func: AllocateClient Allocate Client for fd -1
2017-05-30 14:29:06:0410 CP-7925G user.debug wman: File: ../dil/wlanmgr_ipc.c Line: 30 Func: AllocateClient Allocate Client for fd -1
2017-05-30 14:29:06:0410 CP-7925G user.err kernel: IP-Config: No network devices available.
2017-05-30 14:29:06:0410 CP-7925G user.err kernel: cramfs: wrong magic
2017-05-30 14:29:06:0410 CP-7925G user.emerg kernel: Keypad Driver has been installed.^I^I$Revision: 3.6 $ ($Date: 2009/01/12 07:39:34 $)
2017-05-30 14:29:06:0410 CP-7925G user.emerg kernel: No any charger present
2017-05-30 14:29:06:0860 CP-7925G user.emerg kernel: PMIC Driver has been installed.               $Revision: 3.5 $ ($Date: 2008/08/04 07:24:31 $)
2017-05-30 14:29:06:0860 CP-7925G user.emerg kernel: This PMIC driver is charging workaround version
2017-05-30 14:29:06:0860 CP-7925G user.emerg kernel: This PMIC driver is for P2 BOARD.
2017-05-30 14:29:06:0860 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 70 Func: WRAP_Start TI_Start returned error -1 
2017-05-30 14:29:06:0910 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_cmd.c Line: 30 Func: wlanmgr_set_client_powermode CLI client change request power mode from Auto to VeryLongDoze
2017-05-30 14:29:06:0910 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_cmd.c Line: 37 Func: wlanmgr_set_client_powermode Power profile is changing from Auto to VeryLongDoze 
2017-05-30 14:29:06:0910 CP-7925G user.notice WLANMGR: File: ../dal/TI/wlanmgr_dal.c Line: 987 Func: WlanmgrDAL_setup_power_mode Beacon Filter:0  Listen Interval:1  Offset:0
2017-05-30 14:29:06:0910 CP-7925G user.info WLANMGR: File: ../dal/TI/wlanmgr_dal.c Line: 988 Func: WlanmgrDAL_setup_power_mode beaconInterval:0 dtimPeriod:1 udtimListenInterval:1
2017-05-30 14:29:06:0990 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [148] 
2017-05-30 14:29:06:0990 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(148)
2017-05-30 14:29:06:0990 CP-7925G user.info Cisco7925-Init: Received continue signal from process /voice/wman -m -w -z -p VeryLongDoze[148] 
2017-05-30 14:29:06:0990 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /voice/wman -m -w -z -p VeryLongDoze 
2017-05-30 14:29:06:0990 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /voice/wman -m -w -z -p VeryLongDoze done 
2017-05-30 14:29:07:0000 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/evmgr  pid =153 
2017-05-30 14:29:07:0000 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/evmgr pid=153 
2017-05-30 14:29:07:0080 CP-7925G user.debug Cisco7925-Init: forked process pid=153
2017-05-30 14:29:07:0090 CP-7925G user.info Cisco7925-Init:  Starting               /sbin/evmgr  , pid=153 
2017-05-30 14:29:07:0120 CP-7925G user.alert EVMGR: ******Sending  Charging disconnect event to Init***** 
2017-05-30 14:29:07:0140 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [153] 
2017-05-30 14:29:07:0140 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(153)
2017-05-30 14:29:07:0140 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/evmgr[153] 
2017-05-30 14:29:07:0140 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/evmgr 
2017-05-30 14:29:07:0150 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/evmgr done 
2017-05-30 14:29:07:0150 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cfgmgr  pid =158 
2017-05-30 14:29:07:0150 CP-7925G user.debug Cisco7925-Init: forked process pid=158
2017-05-30 14:29:07:0150 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/cfgmgr pid=158 
2017-05-30 14:29:07:0160 CP-7925G user.info Cisco7925-Init:  Starting              /sbin/cfgmgr  , pid=158 
2017-05-30 14:29:07:0160 CP-7925G user.info CFGMGR[158]: Changing syslog setting to: 7 
2017-05-30 14:29:07:0160 CP-7925G user.info CFGMGR[158]: read_phone_config begin 
2017-05-30 14:29:07:0160 CP-7925G user.debug CFGMGR[158]: Reading misc settings 
2017-05-30 14:29:07:0160 CP-7925G user.debug CFGMGR[158]: Reading WLAN profile settings 
2017-05-30 14:29:07:0170 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0170 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0170 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0170 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0170 CP-7925G user.debug CFGMGR[158]: Reading WLAN profile settings 
2017-05-30 14:29:07:0180 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0180 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0180 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0180 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0180 CP-7925G user.debug CFGMGR[158]: Reading WLAN profile settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN profile settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0190 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0200 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0200 CP-7925G user.debug CFGMGR[158]: Reading WLAN WEP Key settings 
2017-05-30 14:29:07:0200 CP-7925G user.debug CFGMGR[158]: Reading network profile settings 
2017-05-30 14:29:07:0200 CP-7925G user.debug CFGMGR[158]: Reading network profile settings 
2017-05-30 14:29:07:0200 CP-7925G user.debug CFGMGR[158]: Reading network profile settings 
2017-05-30 14:29:07:0200 CP-7925G user.debug theseus-syslogger: waiting for cfgevem to come up
2017-05-30 14:29:07:0200 CP-7925G user.debug CFGMGR[158]: Reading network profile settings 
2017-05-30 14:29:07:0210 CP-7925G user.debug CFGMGR[158]: Reading syslog settings 
2017-05-30 14:29:07:0210 CP-7925G user.debug CFGMGR[158]: Reading sccp settings 
2017-05-30 14:29:07:0210 CP-7925G user.debug CFGMGR[158]: Reading ui settings 
2017-05-30 14:29:07:0210 CP-7925G user.debug CFGMGR[158]: Reading url settings 
2017-05-30 14:29:07:0210 CP-7925G user.debug CFGMGR[158]: Reading security settings 
2017-05-30 14:29:07:0220 CP-7925G user.debug CFGMGR[158]: Reading usb settings 
2017-05-30 14:29:07:0220 CP-7925G user.debug CFGMGR[158]: Reading gmode settings 
2017-05-30 14:29:07:0220 CP-7925G user.debug CFGMGR[158]: Reading wavelink settings 
2017-05-30 14:29:07:0220 CP-7925G user.debug CFGMGR[158]: Reading bluetooth settings 
2017-05-30 14:29:07:0230 CP-7925G user.debug CFGMGR[158]: Reading services settings 
2017-05-30 14:29:07:0230 CP-7925G user.debug CFGMGR[158]: read_services_data: pkiAuthForHttps=0
2017-05-30 14:29:07:0380 CP-7925G user.debug CFGMGR[158]: read_services_data: numOfServices=0
2017-05-30 14:29:07:0380 CP-7925G user.info CFGMGR[158]: read_phone_config end 
2017-05-30 14:29:07:0380 CP-7925G user.info CFGMGR[158]: Changing syslog setting to: 3 
2017-05-30 14:29:07:0380 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [158] 
2017-05-30 14:29:07:0380 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(158)
2017-05-30 14:29:07:0380 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/cfgmgr[158] 
2017-05-30 14:29:07:0390 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/cfgmgr 
2017-05-30 14:29:07:0390 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/cfgmgr done 
2017-05-30 14:29:07:0480 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/btman -s -d  pid =159 
2017-05-30 14:29:07:0480 CP-7925G user.debug Cisco7925-Init: forked process pid=159
2017-05-30 14:29:07:0480 CP-7925G user.info Cisco7925-Init:  Waiting for 2 from /sbin/btman -s -d pid=159 
2017-05-30 14:29:07:0490 CP-7925G user.info Cisco7925-Init:  Starting               /sbin/btman  , pid=159 
2017-05-30 14:29:07:0490 CP-7925G user.info Cisco7925-Init: Process /sbin/btman -s -d run status=1 
2017-05-30 14:29:07:0490 CP-7925G user.info Cisco7925-Init: catchchild:pid =159 cmd=/sbin/btman -s -d normal termination 
2017-05-30 14:29:07:0490 CP-7925G user.info Cisco7925-Init: Received COMPLETE  signal for /sbin/btman -s -d 
2017-05-30 14:29:07:0500 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/btman -s -d done 
2017-05-30 14:29:07:0500 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cfgevmgrup  pid =163 
2017-05-30 14:29:07:0500 CP-7925G user.debug Cisco7925-Init: forked process pid=163
2017-05-30 14:29:07:0500 CP-7925G user.info Cisco7925-Init:  Waiting for 2 from /sbin/cfgevmgrup pid=163 
2017-05-30 14:29:07:0910 CP-7925G user.info Cisco7925-Init:  Starting          /sbin/cfgevmgrup  , pid=163 
2017-05-30 14:29:08:0030 CP-7925G user.debug theseus-syslogger: waiting for cfgevem to come up
2017-05-30 14:29:08:0030 CP-7925G user.err EVMGR: select: Interrupted system call 
2017-05-30 14:29:08:0030 CP-7925G user.info Cisco7925-Init: Process /sbin/cfgevmgrup run status=1 
2017-05-30 14:29:08:0030 CP-7925G user.info theseus-syslogger: Config and Event Manager Cameup.. Reading syslog configuration
2017-05-30 14:29:08:0030 CP-7925G user.info Cisco7925-Init: catchchild:pid =163 cmd=/sbin/cfgevmgrup normal termination 
2017-05-30 14:29:08:0030 CP-7925G user.info Cisco7925-Init: Received COMPLETE  signal for /sbin/cfgevmgrup 
2017-05-30 14:29:08:0030 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/cfgevmgrup done 
2017-05-30 14:29:08:0030 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/mic2pfx  pid =168 
2017-05-30 14:29:08:0030 CP-7925G user.debug Cisco7925-Init: forked process pid=168
2017-05-30 14:29:08:0030 CP-7925G user.info Cisco7925-Init:  Waiting for 2 from /sbin/mic2pfx pid=168 
2017-05-30 14:29:08:0030 CP-7925G user.info Cisco7925-Init:  Starting             /sbin/mic2pfx  , pid=168 
2017-05-30 14:29:08:0030 CP-7925G user.info mic2pfx: Starting exporting MIC key to PFX formart
2017-05-30 14:29:08:0330 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Initialize IPC from client 
2017-05-30 14:29:08:0330 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Initialize IPC with result 0 to client cfgmgr of length 8
2017-05-30 14:29:08:0440 CP-7925G user.info mic2pfx: PFX file for MIC created
2017-05-30 14:29:08:0450 CP-7925G user.info Cisco7925-Init: Process /sbin/mic2pfx run status=1 
2017-05-30 14:29:08:0450 CP-7925G user.info Cisco7925-Init: catchchild:pid =168 cmd=/sbin/mic2pfx normal termination 
2017-05-30 14:29:08:0460 CP-7925G user.info Cisco7925-Init: Received COMPLETE  signal for /sbin/mic2pfx 
2017-05-30 14:29:08:0460 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/mic2pfx done 
2017-05-30 14:29:08:0460 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/secd  pid =171 
2017-05-30 14:29:08:0460 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/secd pid=171 
2017-05-30 14:29:08:0520 CP-7925G user.debug Cisco7925-Init: forked process pid=171
2017-05-30 14:29:08:0520 CP-7925G user.info Cisco7925-Init:  Starting                /sbin/secd  , pid=171 
2017-05-30 14:29:08:0550 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Initialize IPC from client 
2017-05-30 14:29:08:0550 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Initialize IPC with result 0 to client secd of length 8
2017-05-30 14:29:08:0610 CP-7925G user.warn secd: WARN:setOptions: ** process uid 0 (need 3), gid 0 (need 1) ** 
2017-05-30 14:29:08:0610 CP-7925G user.err secd: EROR:setOptions: ** can not run with improper uid/gid ** 
2017-05-30 14:29:08:0630 CP-7925G user.info secd: setEmemSize size=1024
2017-05-30 14:29:08:0630 CP-7925G user.notice secd:     detailed fmt  : OFF 
2017-05-30 14:29:08:0630 CP-7925G user.notice secd:     debug   print : none 
2017-05-30 14:29:08:0630 CP-7925G user.notice secd:     info    print : none 
2017-05-30 14:29:08:0630 CP-7925G user.notice secd:     verbose print : none 
2017-05-30 14:29:08:0630 CP-7925G user.crit secd: Starting... Ver: 1.0
2017-05-30 14:29:08:0730 CP-7925G user.err secd: FIPS RSA SHA1 Self-Tests Passed
2017-05-30 14:29:08:0730 CP-7925G user.err secd: FIPS RSA HMAC-SHA1 Self-Tests Passed
2017-05-30 14:29:08:0730 CP-7925G user.err secd: FIPS RSA AES Self-Tests Passed
2017-05-30 14:29:08:0740 CP-7925G user.err secd: FIPS RSA 3DES Self-Tests Passed
2017-05-30 14:29:08:0880 CP-7925G user.err secd: FIPS RSA Sign/Verify Self-Tests Passed
2017-05-30 14:29:08:0880 CP-7925G user.err secd: FIPS RSA RNG Self-Tests Passed
2017-05-30 14:29:08:0880 CP-7925G user.err secd: FIPS RSA Library Self-Tests Passed
2017-05-30 14:29:08:0880 CP-7925G user.err secd: FIPS Security Information: RSA Self-Tests Passed
2017-05-30 14:29:08:0940 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [171] 
2017-05-30 14:29:08:0940 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(171)
2017-05-30 14:29:08:0940 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/secd[171] 
2017-05-30 14:29:08:0940 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/secd 
2017-05-30 14:29:08:0940 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/secd done 
2017-05-30 14:29:08:0940 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/audiosvr  pid =172 
2017-05-30 14:29:08:0940 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/audiosvr pid=172 
2017-05-30 14:29:08:0950 CP-7925G user.debug Cisco7925-Init: forked process pid=172
2017-05-30 14:29:08:0950 CP-7925G user.info Cisco7925-Init:  Starting            /sbin/audiosvr  , pid=172 
2017-05-30 14:29:09:0280 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Initialize IPC from client 
2017-05-30 14:29:09:0280 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Initialize IPC with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0280 CP-7925G authpriv.err AUD: /var/tmp/audioEventQ file created 
2017-05-30 14:29:09:0280 CP-7925G authpriv.err AUD: create g_AudEventQueue-  msgGet qid = : 10002  
2017-05-30 14:29:09:0280 CP-7925G authpriv.err AUD: /var/tmp/audioToneEventQ file created 
2017-05-30 14:29:09:0290 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set Rx Multicast Status from client audiosvr
2017-05-30 14:29:09:0290 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set Rx Multicast Status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0290 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set Tx Multicast Status from client audiosvr
2017-05-30 14:29:09:0290 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set Tx Multicast Status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0290 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set Rx Unicast Status from client audiosvr
2017-05-30 14:29:09:0290 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set Rx Unicast Status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0300 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [172] 
2017-05-30 14:29:09:0300 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(172)
2017-05-30 14:29:09:0300 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/audiosvr[172] 
2017-05-30 14:29:09:0300 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/audiosvr 
2017-05-30 14:29:09:0300 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/audiosvr done 
2017-05-30 14:29:09:0300 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/gui  pid =178 
2017-05-30 14:29:09:0300 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/gui done 
2017-05-30 14:29:09:0300 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set Tx Unicast Status from client audiosvr
2017-05-30 14:29:09:0300 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set Tx Unicast Status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0310 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set Rx Multicast Status from client audiosvr
2017-05-30 14:29:09:0310 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set Rx Multicast Status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0310 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set Tx Multicast Status from client audiosvr
2017-05-30 14:29:09:0310 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set Tx Multicast Status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0310 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set VAD status from client audiosvr
2017-05-30 14:29:09:0310 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Set VAD status with result 0 to client audiosvr of length 8
2017-05-30 14:29:09:0320 CP-7925G user.debug Cisco7925-Init: forked process pid=178
2017-05-30 14:29:09:0320 CP-7925G user.info Cisco7925-Init:  Starting                 /sbin/gui  , pid=178 
2017-05-30 14:29:09:0640 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Initialize IPC from client 
2017-05-30 14:29:09:0640 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 92 Func: wlan_server_write_cmd_reply Sending reply Initialize IPC with result 0 to client gui of length 8
2017-05-30 14:29:09:0640 CP-7925G user.notice WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 152 Func: CmdPending Received command Set syslog level from client gui
2017-05-30 14:29:09:0640 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/watcher  pid =179 
2017-05-30 14:29:09:0640 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/watcher done 
2017-05-30 14:29:11:0170 CP-7925G user.info modprobe: insmod -s  -k eth0
2017-05-30 14:29:11:0170 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:29:11:0170 CP-7925G user.err GUI: open "/var/tmp/XMLMSG" err:No such file or directory 
2017-05-30 14:29:11:0170 CP-7925G user.err GUI: GUI_Thread started
2017-05-30 14:29:11:0180 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:29:11:0180 CP-7925G user.err GUI: open "/var/tmp/XMLMSG" err:No such file or directory 
2017-05-30 14:29:11:0180 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/dpm  pid =189 
2017-05-30 14:29:11:0190 CP-7925G user.debug Cisco7925-Init: run state [sysstart]action /sbin/dpm done 
2017-05-30 14:29:11:0190 CP-7925G user.debug Cisco7925-Init: return from Handle_event(sysstart) 
2017-05-30 14:29:11:0190 CP-7925G user.debug Cisco7925-Init: Checking PowerStatus... 
2017-05-30 14:29:11:0190 CP-7925G user.debug Cisco7925-Init: PowerStatus (1) 
2017-05-30 14:29:11:0190 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/www  pid =204 
2017-05-30 14:29:11:0190 CP-7925G user.debug Cisco7925-Init: run state [poweron]action /sbin/www done 
2017-05-30 14:29:11:0200 CP-7925G user.debug Cisco7925-Init: forked process pid=179
2017-05-30 14:29:11:0200 CP-7925G user.info Cisco7925-Init:  Starting             /sbin/watcher  , pid=179 
2017-05-30 14:29:11:0220 CP-7925G user.debug Cisco7925-Init: forked process pid=189
2017-05-30 14:29:11:0220 CP-7925G user.info Cisco7925-Init:  Starting                 /sbin/dpm  , pid=189 
2017-05-30 14:29:11:0250 CP-7925G user.debug Cisco7925-Init: forked process pid=204
2017-05-30 14:29:11:0250 CP-7925G user.info Cisco7925-Init:  Starting                 /sbin/www  , pid=204 
2017-05-30 14:29:11:0270 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/netd  pid =205 
2017-05-30 14:29:11:0270 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/netd pid=205 
2017-05-30 14:29:11:0540 CP-7925G user.debug Cisco7925-Init: forked process pid=205
2017-05-30 14:29:11:0540 CP-7925G user.info Cisco7925-Init:  Starting                /sbin/netd  , pid=205 
2017-05-30 14:29:11:0610 CP-7925G user.debug netd: Setting my trace level to 3 
2017-05-30 14:29:12:0060 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [205] 
2017-05-30 14:29:12:0060 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(205)
2017-05-30 14:29:12:0060 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/netd[205] 
2017-05-30 14:29:12:0060 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/netd 
2017-05-30 14:29:12:0060 CP-7925G user.debug Cisco7925-Init: run state [poweron]action /sbin/netd done 
2017-05-30 14:29:12:0060 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cdpd  pid =227 
2017-05-30 14:29:12:0060 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/cdpd pid=227 
2017-05-30 14:29:12:0090 CP-7925G user.debug Cisco7925-Init: forked process pid=227
2017-05-30 14:29:12:0090 CP-7925G user.info Cisco7925-Init:  Starting                /sbin/cdpd  , pid=227 
2017-05-30 14:29:12:0170 CP-7925G user.debug cdpd: Setting my trace level to 3 
2017-05-30 14:29:12:0190 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [227] 
2017-05-30 14:29:12:0190 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(227)
2017-05-30 14:29:12:0190 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/cdpd[227] 
2017-05-30 14:29:12:0200 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/cdpd 
2017-05-30 14:29:12:0200 CP-7925G user.debug Cisco7925-Init: run state [poweron]action /sbin/cdpd done 
2017-05-30 14:29:12:0200 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/imgauthd  pid =231 
2017-05-30 14:29:12:0200 CP-7925G user.debug Cisco7925-Init: run state [poweron]action /sbin/imgauthd done 
2017-05-30 14:29:12:0200 CP-7925G user.debug Cisco7925-Init: forked process pid=231
2017-05-30 14:29:12:0210 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/memmon.sh  pid =232 
2017-05-30 14:29:12:0210 CP-7925G user.debug Cisco7925-Init: run state [poweron]action /sbin/memmon.sh done 
2017-05-30 14:29:12:0210 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cqm  pid =233 
2017-05-30 14:29:12:0210 CP-7925G user.debug Cisco7925-Init: run state [poweron]action /sbin/cqm done 
2017-05-30 14:29:12:0220 CP-7925G user.debug Cisco7925-Init: return from Handle_event(poweron) 
2017-05-30 14:29:12:0220 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=26 
2017-05-30 14:29:12:0220 CP-7925G user.debug Cisco7925-Init: Process: /etc/init.d/rcS terminated  26, exit_action=0 
2017-05-30 14:29:12:0220 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=135 
2017-05-30 14:29:12:0220 CP-7925G user.debug Cisco7925-Init: Process: /voice/wlan_suppl.sh terminated  135, exit_action=0 
2017-05-30 14:29:12:0220 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=136 
2017-05-30 14:29:12:0230 CP-7925G user.debug Cisco7925-Init: Process: /voice/wlaninit terminated  136, exit_action=0 
2017-05-30 14:29:12:0230 CP-7925G user.info Cisco7925-Init: BatteryCharging event status=0 
2017-05-30 14:29:12:0230 CP-7925G user.info Cisco7925-Init: Battery Charging bogus disconnected event 
2017-05-30 14:29:12:0230 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=159 
2017-05-30 14:29:12:0230 CP-7925G user.debug Cisco7925-Init: Process: /sbin/btman -s -d terminated  159, exit_action=0 
2017-05-30 14:29:12:0230 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=163 
2017-05-30 14:29:12:0230 CP-7925G user.debug Cisco7925-Init: Process: /sbin/cfgevmgrup terminated  163, exit_action=0 
2017-05-30 14:29:12:0240 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=168 
2017-05-30 14:29:12:0240 CP-7925G user.debug Cisco7925-Init: Process: /sbin/mic2pfx terminated  168, exit_action=0 
2017-05-30 14:29:12:0240 CP-7925G user.debug Cisco7925-Init: forked process pid=232
2017-05-30 14:29:12:0240 CP-7925G user.info Cisco7925-Init:  Starting           /sbin/memmon.sh  , pid=232 
2017-05-30 14:29:12:0390 CP-7925G user.info Cisco7925-Init:  Starting            /sbin/imgauthd  , pid=231 
2017-05-30 14:29:12:0390 CP-7925G user.debug Cisco7925-Init: forked process pid=233
2017-05-30 14:29:12:0390 CP-7925G user.info Cisco7925-Init:  Starting                 /sbin/cqm  , pid=233 
2017-05-30 14:29:12:0760 CP-7925G user.info Cisco7925-Init: Process /sbin/memmon.sh run status=4 
2017-05-30 14:29:12:0760 CP-7925G user.info Cisco7925-Init: catchchild:pid =232 cmd=/sbin/memmon.sh normal termination 
2017-05-30 14:29:12:0760 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=232 
2017-05-30 14:29:12:0760 CP-7925G user.debug Cisco7925-Init: Process: /sbin/memmon.sh terminated  232, exit_action=0 
2017-05-30 14:29:13:0150 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [233] 
2017-05-30 14:29:13:0150 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(233)
2017-05-30 14:29:13:0150 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/cqm[233] 
2017-05-30 14:29:13:0500 CP-7925G user.err GUI: GUI_Task running ..
2017-05-30 14:29:13:0550 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:29:13:0550 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:29:13:0550 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:29:13:0550 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:29:13:0850 CP-7925G user.err GUI: GUI_Task start listening ..
2017-05-30 14:29:13:0950 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:30:13:0770 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:30:17:0530 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:17:0550 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:17:0620 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:17:0640 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:17:0700 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:18:0510 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:30:22:0060 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:22:0060 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:22:0100 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:22:0100 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:22:0120 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:22:0130 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:22:0200 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:22:0200 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:22:0220 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:22:0230 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:22:0310 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:22:0310 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:32:0010 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:32:0010 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:32:0040 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:32:0050 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:32:0190 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:32:0200 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:32:0230 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:32:0230 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:32:0380 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:32:0390 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:32:0460 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:32:0460 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:42:0930 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:42:0930 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:42:0950 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:42:0950 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:43:0060 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:43:0070 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:43:0150 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:43:0150 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:43:0310 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:43:0310 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:43:0330 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:43:0330 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:52:0770 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:52:0770 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:52:0790 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:52:0790 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:52:0810 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:52:0810 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:52:0880 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:52:0890 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:30:52:0910 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:52:0910 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:30:52:0990 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:30:52:0990 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:31:02:0020 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:31:02:0020 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:31:02:0040 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:31:02:0040 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:31:02:0200 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:31:02:0200 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:31:02:0240 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:31:02:0240 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:31:02:0260 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:31:02:0260 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Security Parameters failure count: 0
2017-05-30 14:31:02:0330 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 472 Func: WRAP_SetCredentials TI_SetCredentials returned error -1 
2017-05-30 14:31:02:0330 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Security Parameters failure count: 1
2017-05-30 14:31:10:0120 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:31:13:0950 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 1
2017-05-30 14:31:13:0950 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:14:0020 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:14:0160 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:14:0490 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 1
2017-05-30 14:31:14:0490 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:14:0510 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:14:0750 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:15:0070 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 2
2017-05-30 14:31:15:0080 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:15:0100 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:15:0330 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:15:0650 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Authentication failure count: 0
2017-05-30 14:31:15:0650 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:15:0800 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:15:0990 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:16:0040 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:16:0210 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:16:0220 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:23:0780 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:24:0170 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 1
2017-05-30 14:31:24:0190 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:24:0250 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:24:0390 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:24:0610 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 2
2017-05-30 14:31:24:0620 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:24:0640 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:24:0800 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:25:0030 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Authentication failure count: 0
2017-05-30 14:31:25:0040 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:25:0120 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:25:0250 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:25:0480 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 1
2017-05-30 14:31:25:0490 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:25:0500 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:33:0600 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:33:0830 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 2
2017-05-30 14:31:33:0840 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:33:0900 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0030 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0250 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Excessive Authentication failure count: 0
2017-05-30 14:31:34:0260 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0320 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0450 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0690 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 1
2017-05-30 14:31:34:0700 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0710 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:34:0990 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:35:0280 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Authentication failure count: 2
2017-05-30 14:31:35:0290 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:35:0310 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:38:0320 CP-7925G user.err GUI: Set SelectedProfile to -1 
2017-05-30 14:31:41:0970 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:42:0340 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 
2017-05-30 14:31:42:0370 CP-7925G user.crit netd: wlan connectivity established. selected profile index=0
2017-05-30 14:31:42:0370 CP-7925G user.err cdpd: Error sending v2 packet: Network is down 
2017-05-30 14:31:42:0720 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:31:42:0720 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:31:42:0720 CP-7925G user.err GUI: open "/var/tmp/skcpque" err:No such file or directory 
2017-05-30 14:31:42:0780 CP-7925G user.crit dhcp[269]: Lease of 10.129.220.215 obtained, lease time 691200
2017-05-30 14:31:43:0480 CP-7925G user.crit netd: network up on wireless interface
2017-05-30 14:31:43:0490 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/tftpd  pid =301 
2017-05-30 14:31:43:0490 CP-7925G user.info Cisco7925-Init:  Waiting for 1 from /sbin/tftpd pid=301 
2017-05-30 14:31:43:0500 CP-7925G user.debug Cisco7925-Init: forked process pid=301
2017-05-30 14:31:43:0500 CP-7925G user.info Cisco7925-Init:  Starting               /sbin/tftpd  , pid=301 
2017-05-30 14:31:43:0610 CP-7925G user.info Cisco7925-Init: Received  continue  signal from process [301] 
2017-05-30 14:31:43:0620 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(301)
2017-05-30 14:31:43:0620 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/tftpd[301] 
2017-05-30 14:31:43:0620 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/tftpd 
2017-05-30 14:31:43:0620 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/tftpd done 
2017-05-30 14:31:43:0620 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/WlinkEnablerMgr  pid =303 
2017-05-30 14:31:43:0620 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/WlinkEnablerMgr done 
2017-05-30 14:31:43:0620 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cfgtftp  pid =304 
2017-05-30 14:31:43:0620 CP-7925G user.info Cisco7925-Init:  Waiting for 2 from /sbin/cfgtftp pid=304 
2017-05-30 14:31:43:0620 CP-7925G user.debug Cisco7925-Init: forked process pid=303
2017-05-30 14:31:43:0710 CP-7925G user.info Cisco7925-Init:  Starting     /sbin/WlinkEnablerMgr  , pid=303 
2017-05-30 14:31:43:0710 CP-7925G user.debug Cisco7925-Init: forked process pid=304
2017-05-30 14:31:43:0710 CP-7925G user.info Cisco7925-Init:  Starting             /sbin/cfgtftp  , pid=304 
2017-05-30 14:31:43:0820 CP-7925G user.err WlinkEnablerMgr: Wavelink Avalanche Server not configured
2017-05-30 14:31:45:0700 CP-7925G user.err CFGTFTP[304]: downloading CTLSEP84B8026B7C97.tlv failed: File not found[2]
2017-05-30 14:31:45:0740 CP-7925G user.err secd: EROR:updateCTL: ** had NO CTL and CTL tftp FAILED** tftp-err 0 
2017-05-30 14:31:46:0910 CP-7925G user.err CFGTFTP[304]: downloading WLAN84B8026B7C97.xml failed: File not found[2]
2017-05-30 14:31:46:0910 CP-7925G user.err CFGTFTP[304]: Unable to download WLAN MAC file WLAN84B8026B7C97.xml