Router#show run Building configuration... Current configuration : 3466 bytes ! ! Last configuration change at 17:34:46 UTC Wed Jan 2 2019 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! no ip icmp rate-limit unreachable ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! no cdp log mismatch duplex ! track 1 ip sla 1 delay down 5 up 5 ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 ip address 10.1.1.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 10.1.2.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 ip address 10.1.3.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto media-type rj45 ! ! router eigrp 1 network 10.0.0.0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 10.1.6.0 255.255.255.0 10.1.2.2 track 1 ip route 10.1.6.0 255.255.255.0 10.1.3.2 2 ! ip sla 1 icmp-echo 10.1.6.2 source-ip 10.1.1.1 threshold 60 frequency 5 ip sla schedule 1 life forever start-time now ! ! ! control-plane ! banner exec ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login transport input none ! no scheduler allocate ! end