card type e1 1

controller E1 1/0
 framing NO-CRC4
 channel-group 1 timeslots 1-2
 channel-group 2 timeslots 3-4
 channel-group 3 timeslots 5-6
 channel-group 4 timeslots 7-8
 channel-group 5 timeslots 9-10
 channel-group 6 timeslots 11-12
 channel-group 7 timeslots 13-14
 channel-group 8 timeslots 15-16
 channel-group 9 timeslots 17-18
 channel-group 10 timeslots 19-20
 channel-group 11 timeslots 21-22
 channel-group 12 timeslots 23-24
 channel-group 13 timeslots 25-26
 channel-group 14 timeslots 27-28
 channel-group 15 timeslots 29-30
!
controller E1 1/1
 shutdown

Router# sh diag

Slot 1:
        NM-2CE1T1_PRI Port adapter, 2 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 1.0
        Top Assy. Part Number    : 800-21551-01
        Board Revision           : F0
        Deviation Number         : 0-0
        Fab Version              : 03
        PCB Serial Number        : FOC10232G1E
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Fab Part Number          : 28-5935-03
        Manufacturing Test Data  : 00 00 00 00 00 00 00 00
        Field Diagnostics Data   : 00 00 00 00 00 00 00 00
        Product (FRU) Number     : NM-2CE1T1-PRI=
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 03 9E 41 01 00 C0 46 03 20 00 54 2F 01
          0x10: 42 46 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 31
          0x20: 30 32 33 32 47 31 45 03 00 81 00 00 00 00 04 00
          0x30: 85 1C 17 2F 03 C4 08 00 00 00 00 00 00 00 00 C5
          0x40: 08 00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Router #sh controllers e1
E1 1/0 is up.
  Applique type is Channelized E1 - balanced
  No alarms detected.
  alarm-trigger is not set
  Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
  Module type is Channelized E1/T1 PRI
  Version info Firmware: 0000001D, FPGA: 0
  Hardware revision is 0.0         , Software revision is 29
  Protocol revision is 1
  number of CLI resets is 0
    receive remote alarm  :    0,
    transmit remote alarm :    0,
    receive AIS alarm     :    0,
    transmit AIS alarm    :    0,
    loss of frame         :    0,
    loss of signal        :    0,
    Loopback test         :    0,
    transmit AIS in TS 16 :    0,
    receive LOMF alarm    :    0,
    transmit LOMF alarm   :    0,
  MIB data updated every 10 seconds.
  Data in current interval (870 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
  Total Data (last 24 hours)
     0 Line Code Violations, 0 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
E1 1/1 is administratively down.