2800#sh conf
Using 1266 out of 245752 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2800
!
boot-start-marker
boot-end-marker
!
card type e1 1
logging buffered 4096 debugging
enable secret 5 $1$IB/o$PvpZ6giuTuCUl/8eKwqWm.
enable password waz2800xx
!
aaa new-model
!
!
!
aaa session-id common
!
resource policy
!
clock timezone MSK 3
ip subnet-zero
!
!
ip cef
!
!
ip name-server 193.251.143.162
ip name-server 196.201.196.34
isdn switch-type primary-net5
!
!
controller E1 1/0
 description E1 connection to PSTN
!
!
interface FastEthernet0/0
 ip address 196.201.180.3 255.255.255.128
 ip nat outside
 duplex full
 speed auto
 no cdp enable
 no mop enabled
!
interface FastEthernet0/1
 ip address 10.100.100.1 255.255.255.0
 ip nat inside
 duplex auto
 speed auto
 no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 196.201.205.1
!
ip http server
ip nat inside source list 15 interface FastEthernet0/0 overload
!
access-list 15 permit 10.100.100.0 0.0.0.255
access-list 101 deny   tcp any any eq smtp
access-list 101 permit ip any any
no cdp run
!
control-plane
!
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
 password haye2800_1
!
no scheduler allocate
!
end