ICBR#show run
Building configuration...

Current configuration : 4452 bytes
!
! Last configuration change at 17:26:06 IST Fri Jan 6 2017
!
version 15.4
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname ICBR
!
boot-start-marker
boot-end-marker
!
!
enable password 7 04561B0A2F701E1D
!
no aaa new-model
memory-size iomem 25
clock timezone IST 5 30
!
!
!
!
!
!
ip gratuitous-arps
!
!
!
!
!
!
!
!


!
!
!
!
no ip bootp server
ip name-server 182.19.95.34
ip name-server 182.19.95.66
ip cef
login block-for 30 attempts 3 within 15
no ipv6 cef
!
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
license udi pid CISCO1941/K9 sn FGL193321XQ
license boot module c1900 technology-package securityk9
license boot module c1900 technology-package datak9
!
!
!
redundancy
!
!
!
!
!
track 1 interface GigabitEthernet0/0 ip routing
 delay down 5 up 5
!
track 2 interface GigabitEthernet0/1 ip routing
 delay down 5 up 5
!
!
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
!
interface GigabitEthernet0/0
 description Vodafone link
 ip address 122.15.167.225 255.255.255.252
 ip nat outside
 ip virtual-reassembly in
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 description Airtel link
 ip address 182.74.119.182 255.255.255.252
 ip nat outside
 ip virtual-reassembly in
 duplex auto
 speed auto
!
interface GigabitEthernet0/0/0
 switchport access vlan 2
 no ip address
!
interface GigabitEthernet0/0/1
 no ip address
!
interface GigabitEthernet0/0/2
 no ip address
!
interface GigabitEthernet0/0/3
 no ip address
!
interface Vlan1
 ip address 192.168.77.1 255.255.255.0 secondary
 ip address 122.15.179.81 255.255.255.248
 ip nat inside
 ip virtual-reassembly in
 ip policy route-map ISP
!
interface Vlan2
 ip address 122.15.73.89 255.255.255.248
 rate-limit input 6000000 1125000 2250000 conform-action transmit exceed-action
drop
 rate-limit output 6000000 1125000 2250000 conform-action transmit exceed-action
 drop
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source static 192.168.77.2 122.15.179.82 route-map primay
ip nat inside source static 192.168.77.3 122.15.179.83 route-map primay
ip nat inside source static 192.168.77.4 122.15.179.84 route-map primay
ip nat inside source static 192.168.77.5 122.15.179.85 route-map primay
ip nat inside source static 192.168.77.2 182.74.73.33 route-map secondary
ip nat inside source static 192.168.77.3 182.74.73.34 route-map secondary
ip nat inside source static 192.168.77.4 182.74.73.35 route-map secondary
ip nat inside source static 192.168.75.5 182.74.73.36 route-map secondary
ip route 0.0.0.0 0.0.0.0 122.15.167.226 track 1
ip route 0.0.0.0 0.0.0.0 182.74.119.181 10 track 2
!
!
ip sla auto discovery
ip sla 1
 icmp-echo 8.8.8.8 source-interface GigabitEthernet0/0
 frequency 5
ip sla schedule 1 life forever start-time now
ip sla 2
 icmp-echo 8.8.4.4 source-interface GigabitEthernet0/1
 frequency 5
ip sla schedule 2 life forever start-time now
!
route-map primay permit 10
 match ip address 101
 match interface GigabitEthernet0/0
!
route-map ISP permit 20
 match ip address 101
 set ip next-hop verify-availability 182.74.119.181 1 track 2
 set ip next-hop verify-availability 122.15.167.226 2 track 1
!
route-map admin permit 10
 match ip address 102
!
route-map secondary permit 10
 match ip address 101
 match interface GigabitEthernet0/1
!
!
snmp-server community public RO
access-list 101 permit ip 192.168.77.0 0.0.0.255 any
access-list 102 permit ip any any
!
control-plane
!
!
!
line con 0
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 password 7 060B1F2D6C1F5B4A
 login
 transport input all
line vty 5 15
 password 7 060B1F2D6C1F5B4A
 login
 transport input all
!
scheduler allocate 20000 1000
event manager applet nat_pri
 event track 1 state any
 action 0.9 cli command "enable"
 action 1.0 cli command "clear arp int gig0/0"
 action 1.1 cli command "clear arp int gig0/1"
 action 2.0 cli command "clear ip nat trans forced"
event manager applet nat_bak
 event track 2 state any
 action 0.9 cli command "enable"
 action 1.0 cli command "clear arp int gig0/0"
 action 1.1 cli command "clear arp int gig0/1"
 action 2.0 cli command "clear ip nat trans forced"
!
end