Connected to Dynamips VM "R2" (ID 6, type c2691) - Console port Press ENTER to get the prompt. BIST FAILED... This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2691 (R7000) processor (revision 0.1) with 187392K/9216K bytes of memory. Processor board ID XXXXXXXXXXX R7000 CPU at 160MHz, Implementation 39, Rev 2.1, 256KB L2, 512KB L3 Cache 2 FastEthernet interfaces 1 Serial(sync/async) interface DRAM configuration is 64 bits wide with parity enabled. 55K bytes of NVRAM. % Crashinfo may not be recovered at flash:crashinfo % This file system device reports an error Press RETURN to get started! *Mar 1 00:00:04.683: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error: call = ifs_open/read / code = 3588 (No device available) / bytes transfered = 0 *Mar 1 00:00:04.695: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up *Mar 1 00:00:04.695: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up *Mar 1 00:00:05.451: %SYS-5-CONFIG_I: Configured from memory by console *Mar 1 00:00:05.715: %SYS-5-RESTART: System restarted -- Cisco IOS Software, 2600 Software (C2691-ENTSERVICESK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Tue 24-Apr-07 15:33 by prod_rel_team *Mar 1 00:00:05.727: %SNMP-5-COLDSTART: SNMP agent on host R2 is undergoing a cold start *Mar 1 00:00:05.811: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up *Mar 1 00:00:05.815: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down *Mar 1 00:00:05.815: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up *Mar 1 00:00:06.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up *Mar 1 00:00:06.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down R2#show conf Using 1073 out of 57336 bytes! ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 no ip icmp rate-limit unreachable ip cef ! ! ! ! no ip domain lookup ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ip tcp synwait-time 5 ! ! ! interface FastEthernet0/0 ip address 180.11.90.193 255.255.255.252 duplex auto speed auto ! interface Serial0/0 ip address 200.200.100.130 255.255.255.252 encapsulation frame-relay clock rate 2000000 frame-relay interface-dlci 200 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! router rip version 2 network 180.11.0.0 network 200.200.100.0 ! ip route 180.11.90.192 255.255.255.252 200.200.100.120 ! ! no ip http server no ip http secure-server ! no cdp log mismatch duplex ! ! ! control-plane ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login ! ! end R2# *Mar 1 00:00:46.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down R2# R2#show ip int brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.11.90.193 YES NVRAM up up Serial0/0 200.200.100.130 YES NVRAM up down FastEthernet0/1 unassigned YES NVRAM administratively down down R2#show int s0/0 Serial0/0 is up, line protocol is down Hardware is GT96K Serial Internet address is 200.200.100.130/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 28, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input never, output 00:00:08, output hang never Last clearing of "show interface" counters 00:04:48 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1158 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 39 packets output, 512 bytes, 0 underruns 0 output errors, 0 collisions, 9 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R2#