=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.05.08 13:44:12 =~=~=~=~=~=~=~=~=~=~=~= INSASA# term len 0 ^ ERROR: % Invalid input detected at '^' marker. INSASA# co INSASA# co  more INSASA# more sy INSASA# more system:run INSASA# more system:running-config : Saved : : Serial Number: JAD195007QY : Hardware: ASA5506, 4096 MB RAM, CPU Atom C2000 series 1250 MHz, 1 CPU (4 cores) : Written by enable_15 at 13:44:13.129 KSA Mon May 8 2017 ! ASA Version 9.5(1) ! hostname INSASA enable password XM1.PYw6ojEiYsJr encrypted xlate per-session deny tcp any4 any4 xlate per-session deny tcp any4 any6 xlate per-session deny tcp any6 any4 xlate per-session deny tcp any6 any6 xlate per-session deny udp any4 any4 eq domain xlate per-session deny udp any4 any6 eq domain xlate per-session deny udp any6 any4 eq domain xlate per-session deny udp any6 any6 eq domain names ! interface GigabitEthernet1/1 description to WAN nameif outside security-level 0 <--- More ---> ip address 172.16.32.1 255.255.0.0 ! interface GigabitEthernet1/2 description to LAN nameif inside security-level 100 ip address 10.10.110.254 255.0.0.0 ! interface GigabitEthernet1/3 shutdown no nameif no security-level no ip address ! interface GigabitEthernet1/4 shutdown no nameif no security-level no ip address ! interface GigabitEthernet1/5 shutdown no nameif no security-level <--- More ---> no ip address ! interface GigabitEthernet1/6 shutdown no nameif no security-level no ip address ! interface GigabitEthernet1/7 shutdown no nameif no security-level no ip address ! interface GigabitEthernet1/8 shutdown no nameif no security-level no ip address ! interface Management1/1 management-only shutdown no nameif <--- More ---> no security-level no ip address ! ftp mode passive clock timezone KSA 3 object network Inside_Net subnet 10.10.0.0 255.255.0.0 access-list inside_access_in extended permit ip 10.10.0.0 255.255.0.0 any pager lines 24 mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network Inside_Net nat (inside,outside) dynamic interface ! nat (inside,outside) after-auto source dynamic any interface route outside 0.0.0.0 0.0.0.0 172.16.32.253 1 route inside 10.10.0.0 255.255.0.0 10.10.110.1 1 timeout xlate 3:00:00 timeout pat-xlate 0:00:30 <--- More ---> timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 user-identity default-domain LOCAL aaa authentication ssh console LOCAL no snmp-server location no snmp-server contact service sw-reset-button crypto ipsec security-association pmtu-aging infinite crypto ca trustpool policy telnet timeout 5 ssh stricthostkeycheck ssh 10.10.110.0 255.255.255.0 inside ssh timeout 5 ssh version 2 ssh key-exchange group dh-group1-sha1 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept <--- More ---> dynamic-access-policy-record DfltAccessPolicy username admin password G9FUBuZj3fIYiHei encrypted privilege 15 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc <--- More ---> inspect tftp inspect sip inspect xdmcp inspect dns preset_dns_map inspect icmp policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum client auto message-length maximum 512 ! service-policy global_policy global prompt hostname context call-home reporting anonymous prompt 2 call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email callhome@cisco.com destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily <--- More ---> Cryptochecksum:da75c7dddf5975caea00ccd4709e8d6c : end INSASA# INSASA# INSASA# wr Building configuration... Cryptochecksum: da75c7dd df5975ca ea00ccd4 709e8d6c 4309 bytes copied in 0.230 secs [OK] INSASA# INSASA# ping 8.8.8.8 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 100/114/140 ms INSASA# INSASA# INSASA# Sep 15 16:45:07.794: %USB_CONSOLE-6-MEDIA_USB: Console media-type is USB. Switch# Switch#wr Building configuration... [OK] Switch# Switch#ip  config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#io   p def Switch(config)#ip default-gateway 10.10.110.1 Switch(config)#exit Switch# Switch#pin Sep 15 16:45:38.755: %SYS-5-CONFIG_I: Configured from console by consoleg Protocol [ip]: Target IP address: % Bad IP address Switch# Switch#ping 8.8.8.8 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds: .... Sep 15 16:45:55.616: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/5, changed state to down. Success rate is 0 percent (0/5) Switch# Sep 15 16:45:56.623: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/5, changed state to down Sep 15 16:46:05.819: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/5, changed state to up Sep 15 16:46:06.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/5, changed state to up Switch# Switch# Switch# Switch# Switch# Switch#tr  ping 172.16.32.253 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.32.253, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) Switch#ping 172.16.32.253 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.32.253, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) Switch# Sep 15 16:47:25.140: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/5, changed state to down Sep 15 16:47:26.140: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/5, changed state to down Switch# Switch# Switch#