HQ#show version Cisco IOS Software, IOSv Software (VIOS-ADVENTERPRISEK9-M), Version 15.6(2)T, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2016 by Cisco Systems, Inc. Compiled Tue 22-Mar-16 16:19 by prod_rel_team ROM: Bootstrap program is IOSv HQ uptime is 20 minutes System returned to ROM by reload System image file is "flash0:/vios-adventerprisek9-m" Last reload reason: Unknown reason This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco IOSv (revision 1.0) with with 460033K/62464K bytes of memory. Processor board ID 9RW37W1KYBI597V49KSZU 4 Gigabit Ethernet interfaces DRAM configuration is 72 bits wide with parity disabled. 256K bytes of non-volatile configuration memory. 2097152K bytes of ATA System CompactFlash 0 (Read/Write) 0K bytes of ATA CompactFlash 1 (Read/Write) 1024K bytes of ATA CompactFlash 2 (Read/Write) 0K bytes of ATA CompactFlash 3 (Read/Write) Configuration register is 0x0 HQ#show run HQ#show running-config Building configuration... Current configuration : 3506 bytes ! ! Last configuration change at 21:39:01 UTC Sun Sep 9 2018 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname HQ ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! no ip icmp rate-limit unreachable ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! no cdp log mismatch duplex ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback4 ip address 8.8.8.8 255.255.255.255 ! interface Tunnel4 ip address 10.4.4.1 255.255.255.0 tunnel source Loopback4 tunnel destination 9.9.9.9 ! interface GigabitEthernet0/0 ip address 44.44.44.1 255.255.255.248 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.0.1 255.255.255.248 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto media-type rj45 ! router ospf 1 router-id 8.8.8.8 area 4 nssa no-summary network 10.4.4.1 0.0.0.0 area 4 network 172.16.0.1 0.0.0.0 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 9.9.9.9 255.255.255.255 44.44.44.2 ! ! ! ! control-plane ! banner exec ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 login transport input none ! no scheduler allocate ! end HQ#show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP a - application route + - replicated route, % - next hop override, p - overrides from PfR Gateway of last resort is not set 8.0.0.0/32 is subnetted, 1 subnets C 8.8.8.8 is directly connected, Loopback4 9.0.0.0/32 is subnetted, 1 subnets S 9.9.9.9 [1/0] via 44.44.44.2 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.4.4.0/24 is directly connected, Tunnel4 L 10.4.4.1/32 is directly connected, Tunnel4 44.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 44.44.44.0/29 is directly connected, GigabitEthernet0/0 L 44.44.44.1/32 is directly connected, GigabitEthernet0/0 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks C 172.16.0.0/29 is directly connected, GigabitEthernet0/1 L 172.16.0.1/32 is directly connected, GigabitEthernet0/1 HQ#show ip int bri Interface IP-Address OK? Method Status Protocol GigabitEthernet0/0 44.44.44.1 YES manual up up GigabitEthernet0/1 172.16.0.1 YES manual up up GigabitEthernet0/2 unassigned YES unset administratively down down GigabitEthernet0/3 unassigned YES unset administratively down down Loopback4 8.8.8.8 YES manual up up Tunnel4 10.4.4.1 YES manual up up HQ#sho HQ#show ip ospf database OSPF Router with ID (8.8.8.8) (Process ID 1) Router Link States (Area 0) Link ID ADV Router Age Seq# Checksum Link count 8.8.8.8 8.8.8.8 415 0x80000007 0x000E5F 1 172.16.0.2 172.16.0.2 990 0x80000006 0x003FF3 1 Net Link States (Area 0) Link ID ADV Router Age Seq# Checksum 172.16.0.2 172.16.0.2 989 0x80000001 0x001CC8 Summary Net Link States (Area 0) Link ID ADV Router Age Seq# Checksum 10.4.4.0 8.8.8.8 406 0x80000001 0x00ED31 Router Link States (Area 4) Link ID ADV Router Age Seq# Checksum Link count 4.0.0.4 4.0.0.4 416 0x80000008 0x00D80F 2 8.8.8.8 8.8.8.8 415 0x80000002 0x004392 2 Summary Net Link States (Area 4) Link ID ADV Router Age Seq# Checksum 0.0.0.0 8.8.8.8 416 0x80000001 0x0048CD Type-7 AS External Link States (Area 4) Link ID ADV Router Age Seq# Checksum Tag 0.0.0.0 4.0.0.4 688 0x80000001 0x004746 0 HQ#