Building configuration... Current configuration : 5809 bytes ! ! Last configuration change at 19:33:17 UTC Tue Apr 6 2021 by noname ! version 15.5 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname cisco_isr ! boot-start-marker boot config usbflash0:CVO-BOOT.CFG boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 $1$wyMt$1Di1CSiiQTzThkCvExLLl0 ! no aaa new-model ethernet lmi ce ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ip dhcp excluded-address 10.10.10.1 ip dhcp excluded-address 10.10.10.5 ip dhcp excluded-address 10.10.10.3 ip dhcp excluded-address 10.10.10.7 ip dhcp excluded-address 10.10.10.15 ip dhcp excluded-address 10.10.10.16 ip dhcp excluded-address 10.10.10.17 ip dhcp excluded-address 10.10.10.18 ip dhcp excluded-address 10.10.10.19 ip dhcp excluded-address 10.10.10.20 ip dhcp excluded-address 10.10.10.21 ip dhcp excluded-address 10.10.10.22 ip dhcp excluded-address 10.10.10.23 ip dhcp excluded-address 10.10.10.24 ip dhcp excluded-address 10.10.10.25 ip dhcp excluded-address 10.10.10.4 ! ip dhcp pool cvo-pool import all network 10.10.10.0 255.255.255.224 default-router 10.10.10.1 lease 0 2 ! ! ! ip domain name yourdomain.com ip name-server 8.8.8.8 ip name-server 1.1.1.1 ip inspect name DEFAULT100 ftp ip inspect name DEFAULT100 h323 ip inspect name DEFAULT100 icmp ip inspect name DEFAULT100 netshow ip inspect name DEFAULT100 rcmd ip inspect name DEFAULT100 realaudio ip inspect name DEFAULT100 rtsp ip inspect name DEFAULT100 esmtp ip inspect name DEFAULT100 sqlnet ip inspect name DEFAULT100 streamworks ip inspect name DEFAULT100 tftp ip inspect name DEFAULT100 tcp ip inspect name DEFAULT100 udp ip inspect name DEFAULT100 vdolive ip cef no ipv6 cef ! ! ! ! ! multilink bundle-name authenticated ! ! chat-script lte "" "AT!CALL" TIMEOUT 20 "OK" ! ! ! ! ! license udi pid C897VAG-LTE-GA-K9 sn FCZ194393LQ ! ! vtp mode transparent username noname privilege 15 secret 5 $1$/gNb$r3Rs2Dhf0v6U1JpfAENv20 ! ! ! ! ! controller VDSL 0 ! controller Cellular 0 lte modem link-recovery rssi onset-threshold -110 lte modem link-recovery monitor-timer 20 lte modem link-recovery wait-timer 10 lte modem link-recovery debounce-count 6 no cdp run ! ! ! ! ! ! ! ! ! ! ! interface ATM0 no ip address no atm ilmi-keepalive ! interface Cellular0 no ip address encapsulation slip shutdown dialer in-band dialer string lte ! interface Cellular1 no ip address encapsulation slip ! interface Ethernet0 no ip address ! interface GigabitEthernet0 no ip address spanning-tree portfast ! interface GigabitEthernet1 no ip address spanning-tree portfast ! interface GigabitEthernet2 no ip address spanning-tree portfast ! interface GigabitEthernet3 no ip address duplex full speed 1000 ! interface GigabitEthernet4 no ip address spanning-tree portfast ! interface GigabitEthernet5 no ip address spanning-tree portfast ! interface GigabitEthernet6 no ip address spanning-tree portfast ! interface GigabitEthernet7 no ip address spanning-tree portfast ! interface GigabitEthernet8 description $ES_WAN$$FW_OUTSIDE$ no ip dhcp client request tftp-server-address ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip flow ingress ip nat outside ip inspect DEFAULT100 out ip virtual-reassembly in duplex auto speed auto media-type rj45 ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$ ip address 10.10.10.1 255.255.255.224 ip access-group 100 in ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1452 ! ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip nat inside source list 1 interface GigabitEthernet8 overload ip route 0.0.0.0 0.0.0.0 GigabitEthernet8 ip route 0.0.0.0 0.0.0.0 GigabitEthernet8 dhcp ! ! access-list 1 permit 10.10.10.0 0.0.0.7 access-list 1 permit 10.10.10.0 0.0.0.31 access-list 1 permit 10.0.0.0 0.255.255.255 access-list 23 permit 10.10.10.0 0.0.0.7 ! control-plane ! ! ! mgcp behavior rsip-range tgcp-only mgcp behavior comedia-role none mgcp behavior comedia-check-media-src disable mgcp behavior comedia-sdp-force disable ! mgcp profile default ! ! ! ! ! ! ! banner exec ^C % Password expiration warning. ----------------------------------------------------------------------- Cisco Virtual Office (CVO) is installed on this device and it provides the default username "cisco". It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username privilege 15 secret 0 Replace and with the username and password you want to use. ----------------------------------------------------------------------- ^C banner login ^C ----------------------------------------------------------------------- Cisco Virtual Office (CVO) is installed on this device and it provides the default username "cisco". It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username privilege 15 secret 0 Replace and with the username and password you want to use. For more information about CVO please go to http://www.cisco.com/go/cvo ----------------------------------------------------------------------- ^C ! line con 0 login local no modem enable line aux 0 line 2 no activation-character no exec transport preferred none transport input all stopbits 1 line 3 script dialer lte no exec line 8 no exec line vty 0 4 access-class 23 in privilege level 15 login local transport input telnet ssh line vty 5 15 access-class 23 in privilege level 15 login local transport input telnet ssh ! scheduler allocate 20000 1000 ! end