controller Cellular 0
 lte sim data-profile 1 attach-profile 1 slot 0
 lte sim data-profile 2 attach-profile 2 slot 1
 lte sim fast-switchover enable
 lte sim max-retry 3
 lte modem dm-log rotation

interface Cellular0
 ip address negotiated
 ip mtu 1460
 ip pim sparse-dense-mode
 ip virtual-reassembly in
 encapsulation slip
 dialer in-band
 dialer idle-timeout 0
 dialer string lte
 dialer-group 1

interface Cellular1
 no ip address
 encapsulation slip

dialer-list 1 protocol ip permit

line 3
 script dialer lte
 modem InOut
 no exec
 transport preferred none
 transport input ssh
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh  
				 
line 8
 script dialer lte
 modem InOut
 no exec
 transport preferred none
 transport input ssh
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh

ip sla 10
 icmp-echo 8.8.8.8
 frequency 500
ip sla schedule 10 life forever start-time now

ip sla 22
 icmp-echo 8.8.8.8
ip sla schedule 22 start-time after 00:01:00

event manager applet Force_LTE
 event syslog pattern "Cellular0 Modem radio has been turned on"
 action 001 cli command "enable"
 action 002 cli command "ip sla schedule 22 start-time after 00:01:00"