RP/0/RP0/CPU0:PE1#sh run 
Tue Apr 16 01:02:32.142 UTC
Building configuration...
!! IOS XR Configuration 7.3.2
!! Last configuration change at Mon Apr 15 22:59:22 2024 by admin
!
hostname PE1
logging console informational
username admin
 group root-lr
 group cisco-support
 secret 10 $6$zveXD1iusnCyAD1.$K4AVNXgDEVNKt4HoFXxyJetmzO9Vdf6SB/0NTL4aHF0Ai5QtQas1HQ6Nz8uKXghs5TqFOXkJ21I8KXafS5JUt0
!
line console
 exec-timeout 60 0
 session-timeout 60
!
vty-pool default 0 5 line-template default
interface Loopback0
 ipv4 address 1.1.1.1 255.255.255.255
!
interface MgmtEth0/RP0/CPU0/0
 ipv4 address 10.1.4.42 255.255.255.252
!
interface GigabitEthernet0/0/0/1
 description TO PC
 mtu 1560
!         
interface GigabitEthernet0/0/0/1.101 l2transport
 description TO PC
 encapsulation untagged
!
interface TenGigE0/0/0/0
 description TO PE2
 mtu 9216
 ipv4 address 10.1.2.1 255.255.255.252
!
router ospf 1
 nsr
 router-id 1.1.1.1
 mpls ldp auto-config
 nsf cisco
 area 1
  network point-to-point
  mpls traffic-eng
  interface Loopback0
  !
  interface TenGigE0/0/0/0
  !
 !
 mpls traffic-eng router-id Loopback0
!
l2vpn
 router-id 1.1.1.1
 xconnect group test
  p2p test
   interface GigabitEthernet0/0/0/1.101
   neighbor ipv4 3.3.3.3 pw-id 55555
   !
  !
 !
!
mpls oam
!
mpls ldp
 log
  hello-adjacency
  neighbor
  nsr     
  graceful-restart
 !
 discovery
  hello holdtime 5
  hello interval 1
 !
 router-id 1.1.1.1
!
ssh server v2
end

RP/0/RP0/CPU0:PE1#