gn-qdc-pw1xxx-con1#term len 0 gn-qdc-pw1xxx-con1#sh run Building configuration... Current configuration : 3783 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname gn-qdc-pw1xxx-con1 ! boot-start-marker boot system flash c1841-ipbasek9-mz.124-24.T1 boot-end-marker ! logging message-counter syslog logging buffered 51200 warnings enable secret 5 $1$WTJ6$PCzt2/UvqH.GL5YH8z77g1 ! no aaa new-model dot11 syslog ip source-route ! ! ! ! ip cef ip domain name yourdomain.com ip host ASR1006 2002 10.1.0.247 ip host ASA5550 2003 10.1.0.247 ip host IPS4270 2004 10.1.0.247 ip host 2960G 2005 10.1.0.247 ip host ME3400 2006 10.1.0.247 multilink bundle-name authenticated ! ! ! ! ! username mss password 0 password username cisco password 0 cisco@123 archive log config hidekeys ! ! ! ! ! interface Loopback0 ip address 10.1.0.247 255.255.255.255 ! interface FastEthernet0/0 description gn-qdc-pwxxxxx-con1:FE0/0 Connected to gn-qdc-pwxxxxx-mesw1:FE0/17 ip address 172.21.2.39 255.255.255.240 duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Group-Async0 physical-layer async ip unnumbered Loopback0 encapsulation ppp dialer in-band dialer idle-timeout 600 dialer-group 1 async mode interactive peer default ip address pool DIALIN ppp authentication chap group-range 1 0/1/0 ! ip local pool DIALIN 10.1.1.1 10.1.1.10 ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 172.21.2.33 ! ip http server ip http access-class 23 ip http authentication local no ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! access-list 23 permit 10.10.10.0 0.0.0.7 dialer-list 1 protocol ip permit ! ! control-plane ! banner exec ^C % Password expiration warning. ----------------------------------------------------------------------- Cisco Router and Security Device Manager (SDM) is installed on this device and it provides the default username "cisco" for one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session. It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username privilege 15 secret 0 Replace and with the username and password you want to use. ----------------------------------------------------------------------- ^C banner login ^C ----------------------------------------------------------------------- Cisco Router and Security Device Manager (SDM) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco". The default username and password have a privilege level of 15. Please change these publicly known initial credentials using SDM or the IOS CLI. Here are the Cisco IOS commands. username privilege 15 secret 0 no username cisco Replace and with the username and password you want to use. For more information about SDM please follow the instructions in the QUICK START GUIDE for your router or go to http://www.cisco.com/go/sdm ----------------------------------------------------------------------- ^C ! line con 0 login local line aux 0 line 0/0/0 0/0/7 modem InOut transport input all autoselect ppp flowcontrol hardware line 0/1/0 modem InOut transport input all autoselect ppp stopbits 1 speed 115200 flowcontrol hardware line vty 0 4 access-class 23 in privilege level 15 login local transport input telnet line vty 5 15 access-class 23 in privilege level 15 login local transport input telnet ! scheduler allocate 20000 1000 end gn-qdc-pw1xxx-con1#sh lin gn-qdc-pw1xxx-con1#sh line Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int * 0 0 CTY - - - - - 4 0 0/0 - I 1 1 AUX 9600/9600 - - - - - 0 0 0/0 - * 0/0/0 2 TTY 9600/9600 - inout - - - 1 0 0/0 Se0/0/0 * 0/0/1 3 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/1 * 0/0/2 4 TTY 9600/9600 - inout - - - 1 0 0/0 Se0/0/2 * 0/0/3 5 TTY 9600/9600 - inout - - - 1 0 0/0 Se0/0/3 * 0/0/4 6 TTY 9600/9600 - inout - - - 1 0 0/0 Se0/0/4 I 0/0/5 7 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/5 I 0/0/6 8 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/6 I 0/0/7 9 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/7 I 0/1/0 18 TTY 115200/115200- inout - - - 0 0 0/0 - 194 194 VTY - - - - 23 0 0 0/0 - 195 195 VTY - - - - 23 0 0 0/0 - 196 196 VTY - - - - 23 0 0 0/0 - 197 197 VTY - - - - 23 0 0 0/0 - 198 198 VTY - - - - 23 0 0 0/0 - 199 199 VTY - - - - 23 0 0 0/0 - 200 200 VTY - - - - 23 0 0 0/0 - 201 201 VTY - - - - 23 0 0 0/0 - 202 202 VTY - - - - 23 0 0 0/0 - 203 203 VTY - - - - 23 0 0 0/0 - 204 204 VTY - - - - 23 0 0 0/0 - 205 205 VTY - - - - 23 0 0 0/0 - 206 206 VTY - - - - 23 0 0 0/0 - 207 207 VTY - - - - 23 0 0 0/0 - 208 208 VTY - - - - 23 0 0 0/0 - 209 209 VTY - - - - 23 0 0 0/0 - Line(s) not in async mode -or- with no hardware support: 10-17, 19-193 gn-qdc-pw1xxx-con1#sh use gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:07:30 IPS4270 00:06:34 ME3400 00:06:07 ASR1006 00:01:53 tty 0/0/0 idle 00:01:57 ASR1006 tty 0/0/1 AutoSelect 00:00:58 tty 0/0/2 idle 00:06:40 ASR1006 tty 0/0/3 idle 00:14:51 ASR1006 tty 0/0/4 idle 00:06:15 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#sh ver Cisco IOS Software, 1841 Software (C1841-IPBASEK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Fri 19-Jun-09 14:07 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) gn-qdc-pw1xxx-con1 uptime is 18 minutes System returned to ROM by power-on System image file is "flash:c1841-ipbasek9-mz.124-24.T1.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory. Processor board ID FHK132677XR 2 FastEthernet interfaces 1 Serial interface 8 Low-speed serial(sync/async) interfaces 1 terminal line DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 31360K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 gn-qdc-pw1xxx-con1#sho gn-qdc-pw1xxx-con1#show mo gn-qdc-pw1xxx-con1#show modem gn-qdc-pw1xxx-con1#show modem Codes: * - Modem has an active call R - Modem is being Reset D - Download in progress B - Modem is marked bad and cannot be used for taking calls b - Modem is either busied out or shut-down Avg Hold Inc calls Out calls Busied Failed No Succ Mdm Time Succ Fail Succ Fail Out Dial Answer Pct. Total: 00:00:00 0 0 0 0 0 0 0 0% gn-qdc-pw1xxx-con1#sh usErs Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:13:15 IPS4270 00:12:19 ME3400 00:11:51 ASR1006 00:02:51 ASA5550 00:02:07 tty 0/0/0 idle 00:02:58 ASR1006 tty 0/0/1 idle 00:01:18 ASR1006 tty 0/0/2 idle 00:12:24 ASR1006 tty 0/0/3 idle 00:20:36 ASR1006 tty 0/0/4 idle 00:12:00 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect all ?Invalid connection name gn-qdc-pw1xxx-con1#sh gn-qdc-pw1xxx-con1#show sess gn-qdc-pw1xxx-con1#show sessions Conn Host Address Byte Idle Conn Name 1 2960G 10.1.0.247 0 13 2960G 2 IPS4270 10.1.0.247 0 12 IPS4270 3 ME3400 10.1.0.247 0 12 ME3400 4 ASR1006 10.1.0.247 0 3 ASR1006 * 5 ASA5550 10.1.0.247 65 2 ASA5550 gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco ips4270 00:00:46 tty 0/0/1 AutoSelect 00:01:14 tty 0/0/2 idle 00:00:56 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect 1 Closing connection to ips4270 [confirm] gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco idle 00:00:00 tty 0/0/1 AutoSelect 00:01:41 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco idle 00:00:00 tty 0/0/1 AutoSelect 00:01:44 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#telnet 2960G 2005 Trying 2960G (10.1.0.247, 2005)... Open gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:00:03 tty 0/0/1 AutoSelect 00:00:39 tty 0/0/3 idle 00:00:20 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#telnet ME3400 2006 Trying ME3400 (10.1.0.247, 2006)... Open gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:01:28 ME3400 00:00:06 tty 0/0/3 idle 00:01:44 ASR1006 tty 0/0/4 idle 00:00:19 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#telnet ME3400 2002 Trying ME3400 (10.1.0.247, 2002)... Open User Access Verification Username: mss Password: gn-qdc-pwxxxxx-sw1>dis gn-qdc-pwxxxxx-sw1>discon gn-qdc-pwxxxxx-sw1>disconnect 1 ?Invalid connection name gn-qdc-pwxxxxx-sw1>disconnect all ?Invalid connection name gn-qdc-pwxxxxx-sw1> gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:02:29 ME3400 00:01:08 ME3400 00:00:06 tty 0/0/0 idle 00:00:11 ASR1006 tty 0/0/1 AutoSelect 00:00:58 tty 0/0/3 idle 00:02:46 ASR1006 tty 0/0/4 idle 00:01:21 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#telnet ASA5550 2003 Trying ASA5550 (10.1.0.247, 2003)... % Connection refused by remote host gn-qdc-pw1xxx-con1#se gn-qdc-pw1xxx-con1#sh gn-qdc-pw1xxx-con1#show sess gn-qdc-pw1xxx-con1#show sessions Conn Host Address Byte Idle Conn Name 1 2960G 10.1.0.247 0 3 2960G 2 ME3400 10.1.0.247 0 2 ME3400 * 3 ME3400 10.1.0.247 0 1 gn-qdc-pw1xxx-con1#sh us gn-qdc-pw1xxx-con1#sh use gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:03:49 ME3400 00:02:28 ME3400 00:01:26 tty 0/0/0 idle 00:01:31 ASR1006 tty 0/0/1 AutoSelect 00:00:11 tty 0/0/3 idle 00:04:06 ASR1006 tty 0/0/4 idle 00:02:41 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disc gn-qdc-pw1xxx-con1#disconnect ? <1-3> The number of an active network connection qdm Disconnect QDM web-based clients ssh Disconnect an active SSH connection gn-qdc-pw1xxx-con1#disconnect 1 Closing connection to 2960G [confirm] gn-qdc-pw1xxx-con1#disconnect 1 ?Invalid connection name gn-qdc-pw1xxx-con1#disconnect 1 ?Invalid connection name gn-qdc-pw1xxx-con1#show sessions Conn Host Address Byte Idle Conn Name 2 ME3400 10.1.0.247 0 3 ME3400 * 3 ME3400 10.1.0.247 0 2 gn-qdc-pw1xxx-con1#disconnect 2 ?Invalid connection name gn-qdc-pw1xxx-con1#disconnect 3 ?Invalid connection name gn-qdc-pw1xxx-con1#show sessions Conn Host Address Byte Idle Conn Name 2 ME3400 10.1.0.247 0 3 ME3400 * 3 ME3400 10.1.0.247 0 2 gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco ME3400 00:03:58 ME3400 00:02:57 tty 0/0/0 idle 00:03:01 ASR1006 tty 0/0/1 AutoSelect 00:01:41 tty 0/0/4 idle 00:04:11 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect ? <2-3> The number of an active network connection qdm Disconnect QDM web-based clients ssh Disconnect an active SSH connection gn-qdc-pw1xxx-con1#disconnect 2 ?Invalid connection name gn-qdc-pw1xxx-con1#disconnect ? <2-3> The number of an active network connection qdm Disconnect QDM web-based clients ssh Disconnect an active SSH connection gn-qdc-pw1xxx-con1#disconnect 2 ?Invalid connection name gn-qdc-pw1xxx-con1#disconnect 3 ?Invalid connection name gn-qdc-pw1xxx-con1# [Resuming connection 3 to ME3400 ... ] gn-qdc-pwxxxxx-sw1>en Password: gn-qdc-pwxxxxx-sw1# gn-qdc-pwxxxxx-sw1# gn-qdc-pwxxxxx-sw1# gn-qdc-pwxxxxx-sw1# gn-qdc-pwxxxxx-sw1# gn-qdc-pwxxxxx-sw1# gn-qdc-pwxxxxx-sw1#dis gn-qdc-pwxxxxx-sw1#disco gn-qdc-pwxxxxx-sw1#disconnect 1 ?Invalid connection name gn-qdc-pwxxxxx-sw1# gn-qdc-pw1xxx-con1#sh user gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco ME3400 00:05:11 ME3400 00:00:04 tty 0/0/0 idle 00:00:08 ASR1006 tty 0/0/1 AutoSelect 00:00:47 tty 0/0/4 idle 00:05:24 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#sh sess gn-qdc-pw1xxx-con1#sh sessions Conn Host Address Byte Idle Conn Name 2 ME3400 10.1.0.247 0 5 ME3400 * 3 ME3400 10.1.0.247 0 0 gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect 2 ?Invalid connection name gn-qdc-pw1xxx-con1#disconnect 3 ?Invalid connection name gn-qdc-pw1xxx-con1#sh sessions Conn Host Address Byte Idle Conn Name 2 ME3400 10.1.0.247 0 6 ME3400 * 3 ME3400 10.1.0.247 0 1 gn-qdc-pw1xxx-con1#sh us gn-qdc-pw1xxx-con1#sh use gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco ME3400 00:06:38 ME3400 00:01:31 tty 0/0/0 idle 00:01:35 ASR1006 tty 0/0/1 AutoSelect 00:00:07 tty 0/0/4 idle 00:06:51 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect ? <2-3> The number of an active network connection qdm Disconnect QDM web-based clients ssh Disconnect an active SSH connection gn-qdc-pw1xxx-con1#disconnect Closing connection to ME3400 [confirm] gn-qdc-pw1xxx-con1#disconnect Closing connection to ME3400 [confirm] gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1#sh sessions % No connections open gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco idle 00:00:00 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#telnet ASA5550 2003 Trying ASA5550 (10.1.0.247, 2003)... % Connection refused by remote host gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco idle 00:00:00 tty 0/0/1 AutoSelect 00:00:27 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#sh sessions % No connections open gn-qdc-pw1xxx-con1#tel gn-qdc-pw1xxx-con1#telnet IPS4270 2004 Trying IPS4270 (10.1.0.247, 2004)... Open gn-qdc-pw1xxx-con1#sh sessions Conn Host Address Byte Idle Conn Name * 1 IPS4270 10.1.0.247 0 0 IPS4270 gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco IPS4270 00:00:10 tty 0/0/1 AutoSelect 00:01:16 tty 0/0/2 idle 00:00:21 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disc gn-qdc-pw1xxx-con1#disconnect 1 ?Invalid connection name gn-qdc-pw1xxx-con1#disconnect Closing connection to IPS4270 [confirm] gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1#sh sessions % No connections open gn-qdc-pw1xxx-con1#telnet 2960G 2005 Trying 2960G (10.1.0.247, 2005)... Open gn-qdc-pw1xxx-con1#sh sessions Conn Host Address Byte Idle Conn Name * 1 2960G 10.1.0.247 0 0 2960G gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco 2960G 00:00:11 tty 0/0/1 AutoSelect 00:00:32 tty 0/0/3 idle 00:00:28 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#DIS gn-qdc-pw1xxx-con1#DISc gn-qdc-pw1xxx-con1#DISconnect 1 Closing connection to 2960G [confirm] gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1#telnet ME3400 2006 Trying ME3400 (10.1.0.247, 2006)... Open gn-qdc-pw1xxx-con1#sh sessions Conn Host Address Byte Idle Conn Name * 1 ME3400 10.1.0.247 0 0 ME3400 gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco ME3400 00:00:10 tty 0/0/1 AutoSelect 00:01:42 tty 0/0/4 idle 00:00:19 ASR1006 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#DIS gn-qdc-pw1xxx-con1#DISC gn-qdc-pw1xxx-con1#DISConnect 1 Closing connection to ME3400 [confirm] gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1#TEL gn-qdc-pw1xxx-con1#TELnet ASR1006 2002 Trying ASR1006 (10.1.0.247, 2002)... Open gn-qdc-pwxxxxx-sw1# gn-qdc-pw1xxx-con1#sh sessions Conn Host Address Byte Idle Conn Name * 1 ASR1006 10.1.0.247 0 0 ASR1006 gn-qdc-pw1xxx-con1#sh users Line User Host(s) Idle Location * 0 con 0 cisco ASR1006 00:00:08 tty 0/0/0 idle 00:00:17 ASR1006 tty 0/0/1 AutoSelect 00:00:16 Interface User Mode Idle Peer Address gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect Closing connection to ASR1006 [confirm] gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1# gn-qdc-pw1xxx-con1#TELnet ASR1006 2002 Trying ASR1006 (10.1.0.247, 2002)... Open gn-qdc-pwxxxxx-sw1# gn-qdc-pw1xxx-con1#sh li gn-qdc-pw1xxx-con1#sh line Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int * 0 0 CTY - - - - - 17 0 0/0 - I 1 1 AUX 9600/9600 - - - - - 0 0 0/0 - * 0/0/0 2 TTY 9600/9600 - inout - - - 5 0 0/0 Se0/0/0 * 0/0/1 3 TTY 9600/9600 - inout - - - 1 0 0/0 Se0/0/1 I 0/0/2 4 TTY 9600/9600 - inout - - - 5 0 0/0 Se0/0/2 I 0/0/3 5 TTY 9600/9600 - inout - - - 3 0 0/0 Se0/0/3 I 0/0/4 6 TTY 9600/9600 - inout - - - 3 0 0/0 Se0/0/4 I 0/0/5 7 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/5 I 0/0/6 8 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/6 I 0/0/7 9 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/7 I 0/1/0 18 TTY 115200/115200- inout - - - 0 0 0/0 - 194 194 VTY - - - - 23 0 0 0/0 - 195 195 VTY - - - - 23 0 0 0/0 - 196 196 VTY - - - - 23 0 0 0/0 - Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int 197 197 VTY - - - - 23 0 0 0/0 - 198 198 VTY - - - - 23 0 0 0/0 - 199 199 VTY - - - - 23 0 0 0/0 - 200 200 VTY - - - - 23 0 0 0/0 - 201 201 VTY - - - - 23 0 0 0/0 - 202 202 VTY - - - - 23 0 0 0/0 - 203 203 VTY - - - - 23 0 0 0/0 - 204 204 VTY - - - - 23 0 0 0/0 - 205 205 VTY - - - - 23 0 0 0/0 - 206 206 VTY - - - - 23 0 0 0/0 - 207 207 VTY - - - - 23 0 0 0/0 - 208 208 VTY - - - - 23 0 0 0/0 - 209 209 VTY - - - - 23 0 0 0/0 - Line(s) not in async mode -or- with no hardware support: 10-17, 19-193 gn-qdc-pw1xxx-con1#dis gn-qdc-pw1xxx-con1#dis % Ambiguous command: "dis" gn-qdc-pw1xxx-con1#disco gn-qdc-pw1xxx-con1#disconnect Closing connection to ASR1006 [confirm] gn-qdc-pw1xxx-con1#sh line Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int * 0 0 CTY - - - - - 17 0 0/0 - I 1 1 AUX 9600/9600 - - - - - 0 0 0/0 - I 0/0/0 2 TTY 9600/9600 - inout - - - 5 0 0/0 Se0/0/0 * 0/0/1 3 TTY 9600/9600 - inout - - - 1 0 0/0 Se0/0/1 I 0/0/2 4 TTY 9600/9600 - inout - - - 5 0 0/0 Se0/0/2 I 0/0/3 5 TTY 9600/9600 - inout - - - 3 0 0/0 Se0/0/3 I 0/0/4 6 TTY 9600/9600 - inout - - - 3 0 0/0 Se0/0/4 I 0/0/5 7 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/5 I 0/0/6 8 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/6 I 0/0/7 9 TTY 9600/9600 - inout - - - 0 0 0/0 Se0/0/7 I 0/1/0 18 TTY 115200/115200- inout - - - 0 0 0/0 - 194 194 VTY - - - - 23 0 0 0/0 - 195 195 VTY - - - - 23 0 0 0/0 - 196 196 VTY - - - - 23 0 0 0/0 - gn-qdc-pw1xxx-con1#sh ip int bri gn-qdc-pw1xxx-con1#sh ip int brief Interface IP-Address OK? Method Status Protocol Async1 10.1.0.247 YES TFTP up up FastEthernet0/0 172.21.2.39 YES NVRAM up down FastEthernet0/1 unassigned YES NVRAM administratively down down Serial0/0/0 10.1.0.247 YES TFTP up up Serial0/0/1 10.1.0.247 YES TFTP up up Serial0/0/2 10.1.0.247 YES TFTP up up Serial0/0/3 10.1.0.247 YES TFTP up up Serial0/0/4 10.1.0.247 YES TFTP up up Serial0/0/5 10.1.0.247 YES TFTP up up Serial0/0/6 10.1.0.247 YES TFTP up up Serial0/0/7 10.1.0.247 YES TFTP up up Async0/1/0 10.1.0.247 YES TFTP up up Group-Async0 10.1.0.247 YES TFTP up up Loopback0 10.1.0.247 YES NVRAM up up