Cisco-Telem#
*Mar  2 16:45:25.654: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/3, TEI 65 changed to up
*Mar  2 16:45:25.658: ISDN BR1/3 Q931: TX -> SETUP pd = 8  callref = 0x70
        Bearer Capability i = 0x8890214846BB
                Standard = CCITT
                Transfer Capability = Unrestricted Digital
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0x83
        Called Party Number i = 0x80, '00860004101'
                Plan:Unknown, Type:Unknown
        Low Layer Compat i = 0x8890214846BB
*Mar  2 16:45:25.710: ISDN BR1/3 Q931: RX <- SETUP_ACK pd = 8  callref = 0xF0
        Channel ID i = 0x89
        Progress Ind i = 0x8188 - In-band info or appropriate now available
*Mar  2 16:45:25.750: ISDN BR1/3 Q931: RX <- CALL_PROC pd = 8  callref = 0xF0
        Channel ID i = 0x89
        Progress Ind i = 0x8188 - In-band info or appropriate now available
*Mar  2 16:45:26.466: ISDN BR1/3 Q931: RX <- DISCONNECT pd = 8  callref = 0xF0
        Cause i = 0x8191 - User busy
*Mar  2 16:45:26.506: ISDN BR1/3 Q931: TX -> RELEASE pd = 8  callref = 0x70
        Cause i = 0x8091 - User busy
*Mar  2 16:45:26.538: ISDN BR1/3 Q931: RX <- RELEASE_COMP pd = 8  callref = 0xF0
*Mar  2 16:45:26.542: ISDN BR1/3 **ERROR**: host_disconnect_ack: VOICE ERROR: NULL VDEV Common(0xFC): b channel 0, call id 0x8179
*Mar  2 16:45:26.550: %CALLRECORD-3-MICA_TERSE_CALL_FAILED_REC: DS0 slot/contr/chan=1/3/0, slot/port=2/1, call_id=8179, calling=(n/a), called=(n/a), time=22, finl-state=CALL_SETUP, disc(modem)=7F01 Condition occurred during call setup/Requested by host/dialed number was busy