R31#show running-config Building configuration... Current configuration : 3505 bytes ! ! Last configuration change at 19:58:52 UTC Sat Jul 17 2021 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R31 ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Tunnel100 bandwidth 4000 ip address 192.168.100.31 255.255.255.0 ip mtu 1400 ip nhrp network-id 100 ip nhrp nhs 192.168.100.11 nbma 172.16.11.1 multicast ip tcp adjust-mss 1360 tunnel source GigabitEthernet0/1 tunnel destination 172.16.11.1 tunnel key 100 ! interface GigabitEthernet0/0 ip address 10.2.2.2 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.31.1 255.255.255.0 no ip split-horizon eigrp 100 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 no ip address duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address duplex auto speed auto media-type rj45 ! ! router eigrp NHRP ! address-family ipv4 unicast autonomous-system 100 ! topology base exit-af-topology network 10.2.2.2 0.0.0.0 network 192.168.100.0 network 192.168.100.31 0.0.0.0 exit-address-family ! router ospf 1 network 172.16.31.1 0.0.0.0 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! control-plane ! banner exec ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 line aux 0 line vty 0 4 login transport input none ! no scheduler allocate ! end