lab: description: '' notes: '' timestamp: 1666808136.4282575 title: Ch19 DMVPN Phase 1 something fishy2 version: 0.0.4 nodes: - id: n0 label: R11 node_definition: iosv x: -500 y: -50 configuration: |- Building configuration... Current configuration : 3601 bytes ! ! Last configuration change at 21:13:55 UTC Wed Oct 26 2022 ! version 15.9 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R11 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Tunnel100 bandwidth 4000 ip address 192.168.100.11 255.255.255.0 no ip redirects ip mtu 1400 no ip split-horizon eigrp 100 ip nhrp network-id 100 ip tcp adjust-mss 1360 keepalive 5 3 tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 100 ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.11.1 255.255.255.252 no ip split-horizon eigrp 100 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 ip address 10.1.1.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto media-type rj45 ! ! router eigrp GRE-OVERLAY ! address-family ipv4 unicast autonomous-system 100 ! topology base exit-af-topology network 10.1.1.0 0.0.0.255 network 192.168.100.0 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 172.16.11.2 ! ipv6 ioam timestamp ! ! ! control-plane ! banner exec ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 login transport input none ! no scheduler allocate ! end image_definition: iosv-159-3-m3 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n1 label: SP node_definition: iosv x: -350 y: -50 configuration: |- Building configuration... Current configuration : 3131 bytes ! ! Last configuration change at 21:14:21 UTC Wed Oct 26 2022 ! version 15.9 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname SP ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.11.2 255.255.255.252 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 ip address 172.16.31.2 255.255.255.252 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 ip address 172.16.41.2 255.255.255.252 duplex auto speed auto media-type rj45 ! router ospf 1 network 0.0.0.0 255.255.255.255 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ipv6 ioam timestamp ! ! ! control-plane ! banner exec ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 login transport input none ! no scheduler allocate ! end image_definition: iosv-159-3-m3 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n2 label: R31 node_definition: iosv x: -200 y: -50 configuration: |- Building configuration... Current configuration : 3581 bytes ! ! Last configuration change at 21:14:38 UTC Wed Oct 26 2022 ! version 15.9 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R31 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Tunnel100 bandwidth 4000 ip address 192.168.100.31 255.255.255.0 ip mtu 1400 ip nhrp network-id 100 ip nhrp nhs 192.168.100.11 nbma 172.16.11.1 multicast ip tcp adjust-mss 1360 keepalive 5 3 tunnel source GigabitEthernet0/1 tunnel destination 172.16.11.1 tunnel key 100 ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.31.1 255.255.255.252 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 ip address 10.3.3.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto media-type rj45 ! ! router eigrp GRE-OVERLAY ! address-family ipv4 unicast autonomous-system 100 ! topology base exit-af-topology network 10.3.3.0 0.0.0.255 network 192.168.100.0 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 172.16.31.2 ! ipv6 ioam timestamp ! ! ! control-plane ! banner exec ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 login transport input none ! no scheduler allocate ! end image_definition: iosv-159-3-m3 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n3 label: R41 node_definition: iosv x: -200 y: 50 configuration: |- Building configuration... Current configuration : 3596 bytes ! ! Last configuration change at 21:15:25 UTC Wed Oct 26 2022 ! version 15.9 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R41 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Tunnel100 bandwidth 4000 ip address 192.168.100.41 255.255.255.0 ip mtu 1400 ip nhrp map 192.168.100.11 172.16.11.1 ip nhrp map multicast 172.16.11.1 ip nhrp network-id 100 ip nhrp nhs 192.168.100.11 ip tcp adjust-mss 1360 tunnel source GigabitEthernet0/1 tunnel destination 172.16.11.1 tunnel key 100 ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.41.1 255.255.255.252 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 ip address 10.4.4.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto media-type rj45 ! ! router eigrp GRE-OVERLAY ! address-family ipv4 unicast autonomous-system 100 ! topology base exit-af-topology network 10.4.4.0 0.0.0.255 network 192.168.100.0 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 172.16.41.2 ! ipv6 ioam timestamp ! ! ! control-plane ! banner exec ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^CCCC ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 login transport input none ! no scheduler allocate ! end image_definition: iosv-159-3-m3 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n4 label: PC11 node_definition: desktop x: -800 y: -50 configuration: |- # this is a shell script which will be sourced at boot hostname inserthostname_here # configurable user account USERNAME=cisco PASSWORD=cisco image_definition: desktop-3-13-2-xfce tags: [] interfaces: - id: i0 slot: 0 label: eth0 type: physical - id: n5 label: PC31 node_definition: desktop x: 100 y: -50 configuration: |- # this is a shell script which will be sourced at boot hostname inserthostname_here # configurable user account USERNAME=cisco PASSWORD=cisco image_definition: desktop-3-13-2-xfce tags: [] interfaces: - id: i0 slot: 0 label: eth0 type: physical - id: n6 label: SW11 node_definition: iosvl2 x: -650 y: -50 configuration: |- Building configuration... Current configuration : 2663 bytes ! ! Last configuration change at 03:16:57 UTC Sun Oct 23 2022 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname SW11 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! ! ! ! ! ! ip cef no ipv6 cef ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 negotiation auto ! interface GigabitEthernet0/1 negotiation auto ! interface GigabitEthernet0/2 negotiation auto ! interface GigabitEthernet0/3 negotiation auto ! ip forward-protocol nd ! ip http server ip http secure-server ! ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr ! ! ! ! ! ! control-plane ! banner exec ^CC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C banner incoming ^CC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C banner login ^CC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! ! end image_definition: iosvl2-2020 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n7 label: SW41 node_definition: iosvl2 x: -50 y: 50 configuration: |- Building configuration... Current configuration : 2666 bytes ! ! Last configuration change at 21:17:06 UTC Wed Oct 26 2022 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname SW41 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! ! ! ! ! ! ip cef no ipv6 cef ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 negotiation auto ! interface GigabitEthernet0/1 negotiation auto ! interface GigabitEthernet0/2 negotiation auto ! interface GigabitEthernet0/3 negotiation auto ! ip forward-protocol nd ! ip http server ip http secure-server ! ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr ! ! ! ! ! ! control-plane ! banner exec ^CCC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C banner incoming ^CCC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C banner login ^CCC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! ! end image_definition: iosvl2-2020 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n8 label: SW31 node_definition: iosvl2 x: -50 y: -50 configuration: |- Building configuration... Current configuration : 2669 bytes ! ! Last configuration change at 21:16:43 UTC Wed Oct 26 2022 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname SW31 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! ! ! ! ! ! ip cef no ipv6 cef ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 negotiation auto ! interface GigabitEthernet0/1 negotiation auto ! interface GigabitEthernet0/2 negotiation auto ! interface GigabitEthernet0/3 negotiation auto ! ip forward-protocol nd ! ip http server ip http secure-server ! ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr ! ! ! ! ! ! control-plane ! banner exec ^CCCC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C banner incoming ^CCCC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C banner login ^CCCC IOSv - Cisco Systems Confidential - Supplemental End User License Restrictions This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment. By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited. ^C ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! ! end image_definition: iosvl2-2020 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n9 label: R5 node_definition: iosv x: -1450 y: 100 configuration: |- Building configuration... Current configuration : 3002 bytes ! ! Last configuration change at 17:36:35 UTC Mon Oct 3 2022 ! version 15.9 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R5 ! boot-start-marker boot-end-marker ! ! no logging console ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 no ip address shutdown duplex auto speed auto media-type rj45 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ipv6 ioam timestamp ! ! ! control-plane ! banner exec ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner incoming ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C banner login ^C ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************^C ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 login transport input none ! no scheduler allocate ! end image_definition: iosv-159-3-m3 tags: [] interfaces: - id: i0 label: Loopback0 type: loopback - id: i1 slot: 0 label: GigabitEthernet0/0 type: physical - id: i2 slot: 1 label: GigabitEthernet0/1 type: physical - id: i3 slot: 2 label: GigabitEthernet0/2 type: physical - id: i4 slot: 3 label: GigabitEthernet0/3 type: physical - id: n10 label: PC41 node_definition: desktop x: 100 y: 50 configuration: |- # this is a shell script which will be sourced at boot hostname inserthostname_here # configurable user account USERNAME=cisco PASSWORD=cisco image_definition: desktop-3-13-2-xfce tags: [] interfaces: - id: i0 slot: 0 label: eth0 type: physical links: - id: l0 i1: i0 n1: n4 i2: i1 n2: n6 - id: l1 i1: i2 n1: n6 i2: i3 n2: n0 - id: l2 i1: i2 n1: n0 i2: i2 n2: n1 - id: l3 i1: i0 n1: n5 i2: i1 n2: n8 - id: l4 i1: i2 n1: n8 i2: i3 n2: n2 - id: l5 i1: i2 n1: n2 i2: i3 n2: n1 - id: l6 i1: i0 n1: n10 i2: i1 n2: n7 - id: l7 i1: i2 n1: n7 i2: i3 n2: n3 - id: l8 i1: i2 n1: n3 i2: i4 n2: n1