cdcfi01-B# connect local-mgmt a
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

cdcfi01-A(local-mgmt)# connect iom 1
Attaching to FEX 1 ...
To exit type 'exit', to abort type '$.'
Bad terminal type: "dumb". Will assume vt100.
fex-1# show platform software cmcctrl po
post    power
fex-1# show platform software cmcctrl power redundancy
==============================
Last update TS                 : 1383790
Stale TS                 : 1383850
Now                         : 1383802
Cluster master                 : yes
Policy                        : Grid
State                        : Lost
Total power available        : 5000
Total power usage        : 412
Power budget requested        : 5000
-----------
Grid                        : 0
        Active PS        : 0
        Spare PS        :
        Unavailable PS        : 1
-----------
-----------
Grid                        : 1
        Active PS        : 2
        Spare PS        :
        Unavailable PS        : 3
-----------
==============================
fex-1#
fex-1# show platform software cmcctrl showi2c
# I2C Bus Statistics Wed Jun 17 09:46:56 CDT 2015
# I2C Bus 1
busn=0 nseg=2
segment 0 local
segment 1 extended
        wait_gt_deadline 11432
error_pca9541_per_device:
# I2C Bus 2
busn=1 nseg=5
segment 0 local
segment 1 chassis
        norxack 25
        pca9541seterr 32
        wait_gt_deadline 67
segment 2 blade
segment 3 fan
        norxack 333
        wait_gt_deadline 22068
segment 4 psu
        norxack 766
        pca9541clrerrprs 572
        pca9541seterr 194
        wait_gt_deadline 20453
gilroy.error.pca9541_control_state 35
gilroy.error.do_reserve_pca9541_control 3
gilroy.counter.reserve 3
gilroy.counter.reserved 305285
gilroy.counter.released 305282
gilroy.counter.already_released 2
gilroy.counter.status_chassis_off 310058
error_pca9541_per_device:
                c.ms 3
                p.psu3.psmi 52
                p.psu0.ms 13
                p.psu1.fru 54
                p.psu1.ms 253
                p.psu1.psmi 35
                p.psu3.fru 53
                p.psu3.ms 306
                c.gpio0 8
                c.gpio1 8
                c.gpio2 8
                c.gpio3 8

# I2C Device Statistics
iom.fru={SUCCESS=12}
iom.rtc={SUCCESS=7}
NAME=iom.woodside
No such path /sys/devices/platform/fsl-i2c.1/i2c-0/0-0048
NAME=iom.dcdc0
        detach_state driver iout iout_cal_offset iout_oc_fault_limit mfr_date mfr_id mfr_location mfr_model mfr_revision mfr_serial name ot_fault_limit ot_warn_limit temperature1 temperature2 vin vin_ov_fault_limit vin_uv_fault_limit vout vout_mode vout_n vout_ov_fault_limit vout_uv_fault_limit
NAME=iom.dcdc1
        detach_state driver iout iout_cal_offset iout_oc_fault_limit mfr_date mfr_id mfr_location mfr_model mfr_revision mfr_serial name ot_fault_limit ot_warn_limit temperature1 temperature2 vin vin_ov_fault_limit vin_uv_fault_limit vout vout_mode vout_n vout_ov_fault_limit vout_uv_fault_limit
iom.gpio0={SUCCESS=675590}
iom.gpio1={SUCCESS=675950}
iom.gpio2={SUCCESS=675590}
iom.gpio3={SUCCESS=1351244}
iom.temp.inlet1={SUCCESS=179939}
iom.temp.inlet2={SUCCESS=179939}
iom.temp.woodside={SUCCESS=157447}
c.fru={SUCCESS=1}
c.seeprom={SUCCESS=849}
f.fm0.fc={SUCCESS=269351}
f.fm0.fru={SUCCESS=1}
f.fm1.fc={SUCCESS=269353}
f.fm1.fru={SUCCESS=1}
f.fm2.fc={SUCCESS=269353}
f.fm2.fru={SUCCESS=1}
f.fm3.fc={SUCCESS=269350}
f.fm3.fru={SUCCESS=1}
f.fm4.fc={SUCCESS=269352}
f.fm4.fru={SUCCESS=1}
f.fm5.fc={SUCCESS=269348}
f.fm5.fru={SUCCESS=1}
f.fm6.fc={SUCCESS=269348}
f.fm6.fru={SUCCESS=1}
f.fm7.fc={SUCCESS=269351}
f.fm7.fru={SUCCESS=1}
p.psu0.fru={SUCCESS=1}
p.psu0.psmi={SUCCESS=959191,EBUSY=1}
p.psu1.fru={SUCCESS=2,ETIMEDOUT=9}
p.psu1.psmi={SUCCESS=5}
p.psu2.fru={SUCCESS=1}
p.psu2.psmi={SUCCESS=14295}
p.psu3.fru={SUCCESS=2,ETIMEDOUT=8}
# I2C Driver sysctl entries
sysctl: error: permission denied on key 'net.ipv4.route.flush'
sysctl: error: permission denied on key 'kernel.cad_pid'
sysctl: error: permission denied on key 'kernel.cap-bound'
dev.i2c.disconnect_retry = 3
dev.i2c.post_trigger = 64
dev.i2c.norxack_blink = 5
dev.i2c.norxack_blink = 5
dev.i2c.fixup_blink = 0
dev.i2c.pca9541-workaround = 16
dev.i2c.wait_deadline = 30
dev.i2c.chassis_reservation.demand = 1
dev.i2c.chassis_reservation.lock_state = 1
dev.i2c.chassis_reservation.auto_release = 1
dev.i2c.chassis_reservation.on_demand = 0
dev.i2c.chassis_reservation.pause_gilroy_thread = 0
dev.i2c.chassis_reservation.min_notheld_ms = 150
dev.i2c.chassis_reservation.wait_extra_ms = 3000
dev.i2c.chassis_reservation.grace_ms = 750
dev.i2c.chassis_reservation.hold_ms = 1500
dev.i2c.chassis_reservation.wait_ms = 4500
dev.i2c.gilroy-debug-level = 3
dev.i2c.debug-level = 1
dev.i2c.pca9541-businit = 1
dev.i2c.pca9541-delay = 250
dev.i2c.bus2.write-cdelay = 100
dev.i2c.bus2.write-delay = 100
dev.i2c.bus1.write-cdelay = 30
dev.i2c.bus1.write-delay = 30
fex-1#
fex-1# exit
rlogin: connection closed.


cdcfi01-A(local-mgmt)# exit
cdcfi01-B# connect iom 1
Attaching to FEX 1 ...
To exit type 'exit', to abort type '$.'
Bad terminal type: "dumb". Will assume vt100.
fex-1# show platform software cmcctrl po
post    power
fex-1# show platform software cmcctrl power redundancy
==============================
Last update TS                 : 1383836
Stale TS                 : 1383896
Cluster master                 : no
Policy                        : Grid
State                        : Lost
Total power available        : 5000
Total power usage        : 414
Power budget requested        : 5000
-----------
Grid                        : 0
        Active PS        : 0
        Spare PS        :
        Unavailable PS        : 1
-----------
-----------
Grid                        : 1
        Active PS        : 2
        Spare PS        :
        Unavailable PS        : 3
-----------
==============================
fex-1# show platform software cmcctrl showi2c
# I2C Bus Statistics Wed Jun 17 09:47:26 CDT 2015
# I2C Bus 1
busn=0 nseg=2
segment 0 local
segment 1 extended
        wait_gt_deadline 15766
error_pca9541_per_device:
# I2C Bus 2
busn=1 nseg=5
segment 0 local
segment 1 chassis
        norxack 52
        pca9541seterr 31
        wait_gt_deadline 61
segment 2 blade
segment 3 fan
segment 4 psu
        norxack 398
        pca9541clrerrprs 268
        pca9541seterr 130
        wait_gt_deadline 12969
gilroy.error.pca9541_control_state 33
gilroy.error.do_reserve_pca9541_control 2
gilroy.counter.reserve 2
gilroy.counter.reserved 305292
gilroy.counter.released 305291
gilroy.counter.already_released 1
gilroy.counter.status_chassis_off 312956
error_pca9541_per_device:
                c.ms 2
                p.psu3.psmi 42
                p.psu0.ms 26
                p.psu1.fru 30
                p.psu1.ms 119
                p.psu1.psmi 34
                p.psu3.fru 24
                p.psu3.ms 123
                c.gpio0 8
                c.gpio1 8
                c.gpio2 8
                c.gpio3 7

# I2C Device Statistics
iom.fru={SUCCESS=12}
iom.rtc={SUCCESS=7}
NAME=iom.woodside
No such path /sys/devices/platform/fsl-i2c.1/i2c-0/0-0048
NAME=iom.dcdc0
        detach_state driver iout iout_cal_offset iout_oc_fault_limit mfr_date mfr_id mfr_location mfr_model mfr_revision mfr_serial name ot_fault_limit ot_warn_limit temperature1 temperature2 vin vin_ov_fault_limit vin_uv_fault_limit vout vout_mode vout_n vout_ov_fault_limit vout_uv_fault_limit
NAME=iom.dcdc1
        detach_state driver iout iout_cal_offset iout_oc_fault_limit mfr_date mfr_id mfr_location mfr_model mfr_revision mfr_serial name ot_fault_limit ot_warn_limit temperature1 temperature2 vin vin_ov_fault_limit vin_uv_fault_limit vout vout_mode vout_n vout_ov_fault_limit vout_uv_fault_limit
iom.gpio0={SUCCESS=693158}
iom.gpio1={SUCCESS=693158}
iom.gpio2={SUCCESS=693158}
iom.gpio3={SUCCESS=1386404}
iom.temp.inlet1={SUCCESS=191083}
iom.temp.inlet2={SUCCESS=191083}
iom.temp.woodside={SUCCESS=167198}
c.fru={SUCCESS=1}
c.seeprom={SUCCESS=838}
f.fm0.fru={SUCCESS=1}
f.fm1.fru={SUCCESS=1}
f.fm2.fru={SUCCESS=1}
f.fm3.fru={SUCCESS=1}
f.fm4.fru={SUCCESS=1}
f.fm5.fru={SUCCESS=1}
f.fm6.fru={SUCCESS=1}
f.fm7.fru={SUCCESS=1}
p.psu3.psmi={SUCCESS=3}
p.psu0.fru={SUCCESS=2}
p.psu0.psmi={SUCCESS=3}
p.psu1.fru={SUCCESS=5,ETIMEDOUT=5}
p.psu1.psmi={SUCCESS=3}
p.psu2.fru={SUCCESS=1}
p.psu2.psmi={SUCCESS=3}
p.psu3.fru={SUCCESS=4,ETIMEDOUT=4}
c.gpio3={ENXIO=1}
# I2C Driver sysctl entries
sysctl: error: permission denied on key 'net.ipv4.route.flush'
sysctl: error: permission denied on key 'kernel.cad_pid'
sysctl: error: permission denied on key 'kernel.cap-bound'
dev.i2c.disconnect_retry = 3
dev.i2c.post_trigger = 64
dev.i2c.norxack_blink = 5
dev.i2c.norxack_blink = 5
dev.i2c.fixup_blink = 0
dev.i2c.pca9541-workaround = 16
dev.i2c.wait_deadline = 30
dev.i2c.chassis_reservation.demand = 0
dev.i2c.chassis_reservation.lock_state = 1
dev.i2c.chassis_reservation.auto_release = 1
dev.i2c.chassis_reservation.on_demand = 0
dev.i2c.chassis_reservation.pause_gilroy_thread = 0
dev.i2c.chassis_reservation.min_notheld_ms = 150
dev.i2c.chassis_reservation.wait_extra_ms = 3000
dev.i2c.chassis_reservation.grace_ms = 750
dev.i2c.chassis_reservation.hold_ms = 1500
dev.i2c.chassis_reservation.wait_ms = 4500
dev.i2c.gilroy-debug-level = 3
dev.i2c.debug-level = 1
dev.i2c.pca9541-businit = 1
dev.i2c.pca9541-delay = 250
dev.i2c.bus2.write-cdelay = 100
dev.i2c.bus2.write-delay = 100
dev.i2c.bus1.write-cdelay = 30
dev.i2c.bus1.write-delay = 30
fex-1#