Initializing ATA monitor library... string is bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF6.bin Loading image, please wait ... Initializing ATA monitor library... Self extracting the image... [OK] Self decompressing the image : #################################################################################################### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by cisco Systems, Inc. Compiled Mon 18-Sep-06 23:18 by tinhuang Image text-base: 0x40101040, data-base: 0x41450000 00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output. 00:00:05: %PFREDUN-6-STANDBY: Initializing as STANDBY processor!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Download Completed! Booting the image. Self decompressing the image : ############################################################################################################################################################################################################# [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by cisco Systems, Inc. Compiled Mon 18-Sep-06 23:03 by tinhuang Image text-base: 0x40101040, data-base: 0x42D90000 This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco CISCO7613 (R7000) processor (revision 1.1) with 983008K/65536K bytes of memory. Processor board ID SAL104574F6 SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset SuperLAT software (copyright 1990 by Meridian Technology Corp). X.25 software, Version 3.0.0. Bridging software. TN3270 Emulation software. 2 SIP-200 controllers (4 POS). 2 SIP-400 controllers (4 GigabitEthernet). 1 Virtual Ethernet/IEEE 802.3 interface 8 Gigabit Ethernet/IEEE 802.3 interfaces 4 Packet over SONET network interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Press RETURN to get started! 00:01:12: curr is 0x0 00:01:12: RP: Currently running ROMMON from S (Gold) region 00:01:32: %SYS-6-CLOCKUPDATE: System clock has been updated from 08:58:44 UTC Tue May 15 2007 to 00:58:44 PST Tue May 15 2007, configured from console by console. 00:01:32: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan 00:01:32: %SYS-5-CONFIG_I: Configured from memory by console 00:01:34: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by cisco Systems, Inc. Compiled Mon 18-Sep-06 23:03 by tinhuang 00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. 00:00:12: %OIR-SP-6-CONSOLE: Changing console ownership to route processor 00:00:12: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. Firmware compiled 07-Aug-06 15:05 by integ Build [100] 00:01:28: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan 00:01:29: SP: SP: Currently running ROMMON from S (Gold) region 00:01:34: %SYS-SP-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by cisco Systems, Inc. Compiled Mon 18-Sep-06 23:18 by tinhuang 00:01:35: %OIR-SP-6-INSPS: Power supply inserted in slot 1 00:01:35: %C6KPWR-SP-4-PSOK: power supply 1 turned on. 00:01:35: %OIR-SP-6-INSPS: Power supply inserted in slot 2 00:01:35: %C6KPWR-SP-4-PSOK: power supply 2 turned on. 00:01:35: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies. 00:01:37: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in effect 00:01:38: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (admin request) 00:01:39: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (admin request) 00:01:41: %C6KPWR-SP-4-DISABLED: power to module in slot 3 set off (admin request) 00:01:44: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (admin request) 00:01:44: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 7. 00:01:45: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 7 became active. 00:01:46: %DIAG-SP-6-RUN_MINIMUM: Module 7: Running Minimal Diagnostics... 00:01:57: %OIR-6-REMCARD: Card removed from slot 1, interfaces disabled 00:01:57: %OIR-6-REMCARD: Card removed from slot 2, interfaces disabled 00:01:57: %OIR-6-REMCARD: Card removed from slot 3, interfaces disabled 00:01:57: %OIR-6-REMCARD: Card removed from slot 4, interfaces disabled 00:01:57: %DIAG-SP-6-DIAG_OK: Module 7: Passed Online Diagnostics 00:01:59: %OIR-SP-6-INSCARD: Card inserted in slot 7, interfaces are now online 00:02:29: %PFREDUN-SP-6-ACTIVE: Standby initializing for SSO mode 00:02:29: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. 00:02:31: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router. 00:03:09: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 8. 00:03:09: %FABRIC-SP-5-FABRIC_MODULE_BACKUP: The Switch Fabric Module in slot 8 became standby 00:03:10: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimal Diagnostics... 00:03:11: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online Diagnostics 00:03:11: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces are now online 00:00:05: %PFREDUN-6-STANDBY: Initializing as STANDBY processor 00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. Firmware compiled 07-Aug-06 15:05 by integ Build [100] 00:01:30: %OIR-SP-STDBY-6-CONSOLE: Changing console ownership to route processor 00:01:30: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. 00:02:29: %PFREDUN-SP-STDBY-6-STANDBY: Initializing for SSO mode 00:02:29: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. 00:02:55: %SPANTREE-SP-STDBY-5-EXTENDED_SYSID: Extended SysId enabled for type vlan 00:02:55: SP-STDBY: SP: Currently running ROMMON from S (Gold) region 00:02:57: %DIAG-SP-STDBY-6-RUN_MINIMUM: Module 8: Running Minimal Diagnostics... 00:03:09: %DIAG-SP-STDBY-6-DIAG_OK: Module 8: Passed Online Diagnostics 00:03:22: %SYS-SP-STDBY-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by cisco Systems, Inc. Compiled Mon 18-Sep-06 23:18 by tinhuang 00:03:22: %PFREDUN-SP-STDBY-6-STANDBY: Ready for SSO mode 00:03:23: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. 7613>