! ip dhcp excluded-address 192.168.99.254 ip dhcp excluded-address 192.168.99.1 ip dhcp excluded-address 192.168.99.251 ip dhcp excluded-address 192.168.99.253 ! ip dhcp pool KUS-AP-Pool import all network 192.168.99.0 255.255.255.0 update dns default-router 192.168.99.254 dns-server 192.168.99.251 domain-name via.lan ! ! ip dhcp update dns both ! ip domain name via.lan ip host via 192.168.99.222 ip host via.lan ns ns1.via.lan ip host ns1 ns 192.168.99.251 ip host jpward-US-N1 192.168.99.13 ip name-server 192.168.99.251 ip dhcp-client update dns server both ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! cts logging verbose ! crypto pki trustpoint TP-self-signed-3123707293 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3123707293 revocation-check none rsakeypair TP-self-signed-3123707293 ! ! crypto pki certificate license udi pid CISCO2911/K9 ! ! username username ! redundancy ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address dhcp ip nat outside ip virtual-reassembly in duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface GigabitEthernet0/2 no ip address duplex auto speed auto ! interface GigabitEthernet0/1/0 description Trunk Link for 2504 WLC on port 4 switchport trunk native vlan 99 switchport mode trunk no ip address ! interface GigabitEthernet0/1/1 description Access Port Connection to Cisco Lightweight AP switchport access vlan 99 no ip address ! interface GigabitEthernet0/1/2 description Access Port Connection to Cisco Lightweight AP switchport access vlan 99 no ip address ! interface GigabitEthernet0/1/3 no ip address ! interface GigabitEthernet0/1/4 no ip address ! interface GigabitEthernet0/1/5 no ip address ! interface GigabitEthernet0/1/6 no ip address ! interface GigabitEthernet0/1/7 no ip address ! interface GigabitEthernet0/3/0 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/1 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/2 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/3 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/4 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/5 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/6 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface GigabitEthernet0/3/7 description VLAN 99 Access for wired ports switchport access vlan 99 no ip address ! interface Vlan1 no ip address ! interface Vlan99 ip address 192.168.99.254 255.255.255.0 ip dns view-group internallist ip nat inside ip virtual-reassembly in ! ip forward-protocol nd ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ip dns view ns1 domain name via.lan domain name-server 192.168.99.251 domain name-server 8.8.8.8 ip dns view-list ns1 view ns1 1 ip dns server ip dns primary via.lan soa ns1.via.lan jpward.via.lan 3600 300 604800 172800 ip nat inside source list 101 interface GigabitEthernet0/0 overload ! ! ! access-list 101 permit ip 192.168.99.0 0.0.0.255 any ! control-plane ! ! banner exec ^C % Password expiration warning. ----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device and it provides the default username "cisco" for one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session. It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username privilege 15 secret 0 Replace and with the username and password you want to use. ----------------------------------------------------------------------- ^C banner login ^C ----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco". These default credentials have a privilege level of 15. YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN CREDENTIALS Here are the Cisco IOS commands. username privilege 15 secret 0 no username cisco Replace and with the username and password you want to use. IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF. For more information about Cisco CP please follow the instructions in the QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp ----------------------------------------------------------------------- ^C ! line con 0 logging synchronous login local line aux 0 logging synchronous line 2 logging synchronous login local no activation-character no exec transport preferred none transport output none stopbits 1 line vty 0 4 privilege level 15 login local transport input telnet ssh line vty 5 15 privilege level 15 login local transport input telnet ssh ! scheduler allocate 20000 1000 cns id hardware-serial cns id hardware-serial event cns id hardware-serial image ! end