Verifying FPGA (P) Signature ....................... PASSED Verifying ROMMON (P) Signature ......... PASSED ************************************************************ * * * Rom Monitor * * Copyright (c) 2012-2014 by Cisco Systems, Inc. * * All rights reserved. * * * ************************************************************ Rom Monitor (P) Version 15.1(1r)SG5 Compiled Thu 06-Nov-14 22:58 [RLS] System : WS-X45-SUP8-E Slot [3] Chassis : WS-C4507R*E Mod [1][2][5] Revision : CPU 2.1 BOARD 4.0 FPGA 3.2978.834F Memory : 4096 MB Date : Thu Jun 18 04:07:26 2015 ***** The system will autoboot in 5 seconds ***** Type Control-C to prevent autobooting.... . . . . . config-register = 0x2101 Autobooting using the first file from bootflash..... * * Loading image !!!!!!!!!!!!!!!!!!!!!!! Checking digital signature.... [mem:/cat4500es8-firmware] Digitally Signed Release Software with key version A Rommon reg: 0x00084F80 Reset2Reg: 0x0C200000 ######## Conan controller 0x37A9DAE4..0x37CFA709 Size: 0x00C962A0 @ #### Radtrooper controller 0x37901F48..0x37A9DAE2 Size: 0x00661EDC @ Link: 0x00000080-0x16000000 Program Done! Checking digital signature.... [mem:/cat4500es8-base] Digitally Signed Release Software with key version A ########### pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01) pci 0001:02:00.0: ignoring class b20 (doesn't match header type 01) pci 0002:04:00.0: ignoring class b20 (doesn't match header type 01) audit: cannot initialize inotify handle All packages are Digitally Signed Starting System Services rdevpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=4,mode=600,ptmxmode=000 0 0 diagsk10-post version 6.1.0.1 prod: WS-X45-SUP8-E part: 73-14915-06 serial: CAT1918L432 Power-on-self-test for Module 3: WS-X45-SUP8-E CPU Subsystem Tests ... seeprom: Pass Traffic: L3 Loopback ... Test Results: Pass Traffic: L2 Loopback ... Test Results: Pass post done(64 secs) Exiting to ios... Loading gsbu64atomic as gdb64atomic Using 3 for MTS slot Platform Manager: acquire hwlock chassis() Platform Manager: starting in standalone mode Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSAL-M), Version 03.07.00.E RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Sun 07-Dec-14 20:32 by prod_rel_team Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. (http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software. cisco WS-C4507R+E (P5040) processor (revision 2) with 4194304K bytes of physical memory. Processor board ID FXS1916Q3ML P5040 CPU at 2.2GHz, Supervisor 8-E Last reset from PowerUp 1 Virtual Ethernet interface 120 Gigabit Ethernet interfaces 8 Ten Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory.  Press RETURN to get started! *Jun 18 04:10:24.823: %C4K_IOSSYS-6-IMAGELEVEL: Supervisor booting in image level 'entservices' *Jun 18 04:10:24.892: %C4K_REDUNDANCY-6-INIT: Initializing as ACTIVE supervisor *Jun 18 04:10:32.063: %C4K_IOSMODPORTMAN-4-POWERSUPPLYBAD: Power supply 2 has failed or been turned off *Jun 18 04:11:56.570: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan *Jun 18 04:11:58.136: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-X4748-RJ45-E S/N: CAT1917L0XF Hw: 1.1) is online *Jun 18 04:11:58.136: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 2 (WS-X4748-RJ45-E S/N: CAT1917L0VG Hw: 1.1) is online *Jun 18 04:11:58.136: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 3 (WS-X45-SUP8-E S/N: CAT1918L432 Hw: 1.2) is online *Jun 18 04:11:58.136: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 5 (WS-X4724-SFP-E S/N: CAT1917L4SC Hw: 1.0) is online *Jun 18 04:12:02.111: %SYS-5-CONFIG_I: Configured from memory by consoleSystem has been configured *Jun 18 04:12:02.222: %SYS-5-RESTART: System restarted -- Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSAL-M), Version 03.07.00.E RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Sun 07-Dec-14 20:32 by prod_rel_team Switch> Switch> Switch> Switch> Switch>en Switch# Switch# Switch#sh ver Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSAL-M), Version 03.07.00.E RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Sun 07-Dec-14 20:32 by prod_rel_team Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. (http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software. ROM: 15.1(1r)SG5 Switch uptime is 1 minute --More--  Uptime for this control processor is 3 minutes System returned to ROM by power-on Running default software Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1B9E Last reload reason: power-on License Information for 'WS-X45-SUP8-E' License Level: entservices Type: Permanent Next reboot license Level: entservices cisco WS-C4507R+E (P5040) processor (revision 2) with 4194304K bytes of physical memory. Processor board ID FXS1916Q3ML P5040 CPU at 2.2GHz, Supervisor 8-E Last reset from PowerUp 1 Virtual Ethernet interface 120 Gigabit Ethernet interfaces 8 Ten Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. --More--   Configuration register is 0x2101 Switch# Switch#sh lice sum Index 0 Feature: entservices Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Index 1 Feature: ipbase Period left: 8 weeks 4 days License Type: Evaluation License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: None Index 2 Feature: lanbase Period left: 1513 weeks 1 day License State: Active, Not in Use, EULA not accepted License Count: Non-Counted Index 3 Feature: internal_service Period left: 0 seconds Switch# Switch#sh inv Switch#sh inventory NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4507R+E 7 slot switch " PID: WS-C4507R+E , VID: V09 , SN: FXS1916Q3ML NAME: "Clock Module", DESCR: "Clock Module" PID: WS-X4K-CLOCK-E , VID: , SN: FXS191500MZ NAME: "Mux Buffer 1 ", DESCR: "Mux Buffers for Redundancy Logic" PID: WS-X4590-EX= , VID: , SN: FXS191508RQ NAME: "Mux Buffer 2 ", DESCR: "Mux Buffers for Redundancy Logic" PID: WS-X4590-EX= , VID: , SN: FXS1915074W NAME: "Mux Buffer 5 ", DESCR: "Mux Buffers for Redundancy Logic" PID: WS-X4590-EX= , VID: , SN: FXS191404EH NAME: "Mux Buffer 6 ", DESCR: "Mux Buffers for Redundancy Logic" PID: WS-X4590-EX= , VID: , SN: FXS1915070S NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic" PID: WS-X4590-EX= , VID: , SN: FXS191407J5 NAME: "Linecard(slot 1)", DESCR: "10/100/1000BaseT (RJ45) with 4810/100/1000 BaseT EEE ports" --More--  PID: WS-X4748-RJ45-E , VID: V03 , SN: CAT1917L0XF NAME: "Linecard(slot 2)", DESCR: "10/100/1000BaseT (RJ45) with 4810/100/1000 BaseT EEE ports" PID: WS-X4748-RJ45-E , VID: V03 , SN: CAT1917L0VG NAME: "Supervisor(slot 3)", DESCR: "Sup 8-E 10GE (SFP+), 1000BaseX (SFP) with 8 SFP+ Ports" PID: WS-X45-SUP8-E , VID: V04 , SN: CAT1918L432 NAME: "Linecard(slot 5)", DESCR: "1000BaseX (SFP) with 24 SFP Ports Jumbo Frame Support" PID: WS-X4724-SFP-E , VID: V01 , SN: CAT1917L4SC NAME: "FanTray 1", DESCR: "FanTray" PID: WS-X4597+E , VID: V04 , SN: FXS1916Q3VL NAME: "Power Supply 1", DESCR: "Power Supply ( AC 2800W )" PID: PWR-C45-2800ACV , VID: V07 , SN: SNI1916A6A1 NAME: "Power Supply 2", DESCR: "Power Supply ( AC 2800W )" PID: PWR-C45-2800ACV , VID: V07 , SN: SNI1916A69N --More--   Switch# Switch# Switch#sh    conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)# Switch(config)#ip wcc Switch(config)#ip wccp 10 ? group-address Set the multicast group group-list Set the access-list used to permit group membership password Set the authentication password redirect-list Set the access-list used to permit redirection Switch(config)#ip wccp 10 re Switch(config)#ip wccp 10 redirect-list % Incomplete command. Switch(config)# Switch(config)#ip  in  line vty 0 Switch(config-line)#tra Switch(config-line)#transport in Switch(config-line)#transport input as  >? % Unrecognized command Switch(config-line)#transport input > ? all All protocols none No protocols telnet TCP/IP Telnet protocol Switch(config-line)#transport input % Incomplete command. Switch(config-line)#^Z Switch# Switch# Switch#sh *Jun 18 04:13:11.578: %SYS-5-CONFIG_I: Configured from console by console Switch#sh flas Switch#sh flas    boot Switch#sh bootf Switch#sh bootflash: -#- --length-- ---------date/time--------- path 1 4096 May 18 2015 08:16:05.0000000000 +00:00 virtual-instance 2 4096 May 18 2015 08:16:05.0000000000 +00:00 vman_fdb 3 4096 May 18 2015 08:16:05.0000000000 +00:00 virtual-instance-stby-sync 4 4096 May 18 2015 08:16:05.0000000000 +00:00 virtual-instance-stby-sync/guestshell+ 5 215049252 May 18 2015 09:04:48.0000000000 +00:00 cat4500es8-universal.SPA.03.07.00.E.152-3.E.bin 1395896320 bytes available (217894912 bytes used) Switch# Switch#wr Building configuration... Compressed configuration from 5013 bytes to 1492 bytes[OK] Switch#