CE1 Config:
switch virtual domain 22
 switch mode virtual
 switch 1 priority 110
 mac-address use-virtual

interface Loopback0
 description GLOBAL - LOGICAL LOOPBACK INTERFACE
 ip address 10.64.1.171 255.255.255.255
 ip pim sparse-mode

interface TenGigabitEthernet1/5/1
 description ppe1
 no switchport
 mtu 9216
 ip address 10.64.3.34 255.255.255.252
 mpls ip

interface TenGigabitEthernet1/5/14
 description VSL FAST HELLO
 no switchport
 no ip address
 no cdp enable
 dual-active fast-hello
!
interface TenGigabitEthernet1/5/15
 description SWITCH 2 VSL
 no switchport
 no ip address
 no cdp enable
 channel-group 1 mode on
!
interface TenGigabitEthernet1/5/16
 description SWITCH 2 VSL
 no switchport
 no ip address
 no cdp enable
 channel-group 1 mode on

interface TenGigabitEthernet2/5/1
 description ppe2
 no switchport
 mtu 9216
 ip address 10.64.3.38 255.255.255.252
 mpls ip

interface TenGigabitEthernet2/5/14
 description VSL FAST HELLO
 no switchport
 no ip address
 no cdp enable
 dual-active fast-hello
!
interface TenGigabitEthernet2/5/15
 description SWITCH 1 VSL
 no switchport
 no ip address
 no cdp enable
 channel-group 2 mode on
!
interface TenGigabitEthernet2/5/16
 description SWITCH 1 VSL
 no switchport
 no ip address
 no cdp enable
 channel-group 2 mode on

router ospf 10
 router-id 10.64.1.171
 auto-cost reference-bandwidth 100000
 nsf ietf
 timers throttle spf 10 100 5000
 timers throttle lsa 10 100 5000
 timers lsa arrival 80
 network 10.64.0.0 0.0.255.255 area 0
!
router bgp 55555
 bgp router-id 10.64.1.171
 bgp log-neighbor-changes
 neighbor ROUTE-REFLECTOR1 remote-as 55555
 neighbor ROUTE-REFLECTOR1 update-source Loopback0
 neighbor ROUTE-REFLECTOR1 timers 10 30
 neighbor ROUTE-REFLECTOR2 remote-as 55555
 neighbor ROUTE-REFLECTOR2 update-source Loopback0
 neighbor ROUTE-REFLECTOR2 timers 10 30

CE1#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is 10.64.3.37 to network 0.0.0.0

O*E2  0.0.0.0/0 [110/1] via 10.64.3.37, 00:35:20, TenGigabitEthernet2/5/1
                [110/1] via 10.64.3.33, 00:41:53, TenGigabitEthernet1/5/1