!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname IR829GW
!
boot-start-marker
boot system flash:ir800-universalk9-mz.SPA.156-3.M
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
service-module wlan-ap 0 bootimage autonomous
!
ignition off-timer 900
!
ignition undervoltage threshold 9
!
no ignition enable
!
!
!
!
!
!
!
!
!
!
!


!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
chat-script lte "" "AT!CALL" TIMEOUT 20 "OK"
!
!
license udi pid IR829GW-LTE-GA-EK9 sn FXXXXXXXXX
!
!
!
redundancy
!
!
!
!
!
controller Cellular 0
 lte sim data-profile 2 attach-profile 2 slot 0
 lte sim max-retry 0
 lte modem link-recovery rssi onset-threshold -110
 lte modem link-recovery monitor-timer 20
 lte modem link-recovery wait-timer 10
 lte modem link-recovery debounce-count 6
!
! 
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0
 no ip address
!
interface GigabitEthernet1
 no ip address
!
interface GigabitEthernet2
 no ip address
!
interface GigabitEthernet3
 no ip address
!
interface GigabitEthernet4
 no ip address
!
interface Wlan-GigabitEthernet0
 no ip address
!
interface GigabitEthernet5
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Cellular0
 ip address negotiated
 ip nat outside
 no ip virtual-reassembly in
 encapsulation slip
 dialer in-band
 dialer idle-timeout 0
 dialer string lte
 dialer watch-group 1
 async mode interactive
!
interface Cellular1
 no ip address
 encapsulation slip
 shutdown
!
interface wlan-ap0
 no ip address
!
interface Vlan1
 ip address 192.168.16.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly in
!
interface Async0
 no ip address
 encapsulation scada
!
interface Async1
 no ip address
 encapsulation scada
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source static tcp 192.168.16.11 80 interface Cellular0 8888
ip nat inside source static tcp 192.168.16.12 5900 interface Cellular0 5900
ip nat inside source static tcp 192.168.16.13 5900 interface Cellular0 5910
ip nat inside source list 101 interface Cellular0 overload
ip route 0.0.0.0 0.0.0.0 Cellular0
!
dialer watch-list 1 ip 5.6.7.8 0.0.0.0 !-- this is generating bogus trafic to keep the cellular 0 interface up.
dialer-list 1 protocol ip permit
ipv6 ioam timestamp
!
!
access-list 101 permit ip any any
!
control-plane
!
!
!
!
line con 0
 exec-timeout 0 0
 password cisco
 logging synchronous
 login
 stopbits 1
line 1 2
 stopbits 1
line 3
 script dialer lte
 modem InOut
 no exec
 transport preferred lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 speed 384000
line 4
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line 8
 no exec
 transport preferred lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 speed 384000
line 1/3 1/6
 transport preferred none
 transport output none
 stopbits 1
line vty 0 4
 password cisco
 login
 transport input all
line vty 5 15
 password cisco
 login
 transport input all
!
no scheduler max-task-time
!
!
!
!
!
!
end

LAB-IR829GW#