Switch# Switch# Switch# Switch#sh vtp stta  atus VTP Version capable : 1 to 3 VTP version running : 1 VTP Domain Name : VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 706b.b9fc.5d80 Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 Local updater ID is 172.22.202.96 on interface Vl1 (lowest numbered VLAN interface found) Feature VLAN: -------------- VTP Operating Mode : Server Maximum VLANs supported locally : 1005 Number of existing VLANs : 5 Configuration Revision : 0 MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD 0x56 0x9D 0x4A 0x3E 0xA5 0x69 0x35 0xBC Switch# Switch#sh flash Directory of flash:/ 672 -rwx 7618 Oct 1 2017 09:27:48 +00:00 config.text 2 -rwx 3096 Oct 1 2017 09:27:52 +00:00 multiple-fs 3 -rwx 1916 Oct 1 2017 09:27:48 +00:00 private-config.text 5 drwx 512 Aug 31 2000 01:37:04 +00:00 c2960x-universalk9-mz.152-2.E6 670 drwx 512 Aug 31 2000 01:37:06 +00:00 dc_profile_dir 122185728 bytes total (95041024 bytes free) Switch# Switch# Switch# Switch# Switch# Switch# Switch# Switch# Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#vtp mode client Setting device to VTP Client mode for VLANS. Switch(config)# Switch(config)# Switch(config)# Switch(config)# Switch(config)# Switch(config)# Switch(config)#vtp domain ANTAMINA Changing VTP domain name from NULL to ANTAMINA Switch(config)# Oct 1 09:30:23.788: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. Oct 1 09:30:23.788: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal revision summary on trunk: St5 (Switch-5) (Switch-5) Oct 1 09:30:23.788: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal revision summary on trunk: St4 (Switch-4) (Switch-4) Oct 1 09:30:23.813: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal revision summary on trunk: St3 (Switch-3) (Switch-3) Oct 1 09:30:23.788: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-5) Oct 1 09:30:23.792: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-2) Oct 1 09:30:23.792: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-4) Oct 1 09:30:23.813: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-3) Switch(config)# Switch(config)#vtp doma Switch(config)#vtp domain        pass Switch(config)#vtp password ANTAMINAvtp Setting device VTP password to ANTAMINAvtp Switch(config)# Oct 1 09:30:54.833: %SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 4 from vtp function vtp_configure_domain: No such domain -Traceback= 555EECz 20332F8z 203BB00z 47F6D8z 486784z 4989C4z 2E31644z 2E2D340z Switch(config)# Switch(config)# Switch(config)# Switch(config)# Switch(config)# Switch# Switch# Switch# Switch#sh Oct 1 09:31:08.485: %SYS-5-CONFIG_I: Configured from console by vty0 (127.0.0.4) vty p status VTP Version capable : 1 to 3 VTP version running : 1 VTP Domain Name : ANTAMINA VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 706b.b9fc.5d80 Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 Feature VLAN: -------------- VTP Operating Mode : Client Maximum VLANs supported locally : 1005 Number of existing VLANs : 5 Configuration Revision : 0 MD5 digest : 0xF6 0x1A 0x16 0x1F 0x68 0x06 0x41 0xDC 0x85 0xDC 0x93 0x75 0x5E 0x02 0xC3 0xDE *** MD5 digest checksum mismatch on trunk: St3 *** Switch# Switch# Switch#sh run int g3/0/28 6 Building configuration... Current configuration : 280 bytes ! interface GigabitEthernet3/0/26 switchport mode trunk switchport nonegotiate logging event trunk-status srr-queue bandwidth share 1 30 35 5 priority-queue out mls qos trust cos macro description cisco-switch auto qos trust spanning-tree link-type point-to-point end Switch# Switch# Switch# Switch# Switch# Switch# Switch#sh flash Directory of flash:/ 672 -rwx 7618 Oct 1 2017 09:27:48 +00:00 config.text 2 -rwx 3096 Oct 1 2017 09:27:52 +00:00 multiple-fs 3 -rwx 1916 Oct 1 2017 09:27:48 +00:00 private-config.text 5 drwx 512 Aug 31 2000 01:37:04 +00:00 c2960x-universalk9-mz.152-2.E6 670 drwx 512 Aug 31 2000 01:37:06 +00:00 dc_profile_dir 122185728 bytes total (95041024 bytes free) Switch# Switch# Switch# Switch# Switch# Switch#sh vtp status VTP Version capable : 1 to 3 VTP version running : 1 VTP Domain Name : ANTAMINA VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 706b.b9fc.5d80 Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 Feature VLAN: -------------- VTP Operating Mode : Client Maximum VLANs supported locally : 1005 Number of existing VLANs : 5 Configuration Revision : 0 MD5 digest : 0xF6 0x1A 0x16 0x1F 0x68 0x06 0x41 0xDC 0x85 0xDC 0x93 0x75 0x5E 0x02 0xC3 0xDE *** MD5 digest checksum mismatch on trunk: St3 *** Switch#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled) No Active Message Discriminator. No Inactive Message Discriminator. Console logging: level debugging, 154 messages logged, xml disabled, filtering disabled Monitor logging: level debugging, 14 messages logged, xml disabled, filtering disabled Logging to: vty1(14) Buffer logging: level debugging, 154 messages logged, xml disabled, filtering disabled Exception Logging: size (4096 bytes) Count and timestamp logging messages: disabled File logging: disabled Persistent logging: disabled No active filter modules. Trap logging: level informational, 145 message lines logged Logging Source-Interface: VRF Name: Log Buffer (4096 bytes): ine protocol on Interface GigabitEthernet5/0/21, changed state to down (Switch-2) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/22, changed state to down (Switch-2) Oct 1 09:27:39.882: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/18, changed state to down (Switch-4) Oct 1 09:27:39.882: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/19, changed state to down (Switch-4) Oct 1 09:27:39.882: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/20, changed state to down (Switch-4) Oct 1 09:27:39.882: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/21, changed state to down (Switch-4) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/22, changed state to down (Switch-4) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/23, changed state to down (Switch-2) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/24, changed state to down (Switch-2) Oct 1 09:27:39.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/25, changed state to down (Switch-2) Oct 1 09:27:39.917: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/26, changed state to down (Switch-2) Oct 1 09:27:39.917: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/27, changed state to down (Switch-2) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/23, changed state to down (Switch-4) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/24, changed state to down (Switch-4) Oct 1 09:27:39.896: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/25, changed state to down (Switch-4) Oct 1 09:27:39.910: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/26, changed state to down (Switch-4) Oct 1 09:27:39.917: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/27, changed state to down (Switch-4) Oct 1 09:27:39.938: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/28, changed state to down (Switch-2) Oct 1 09:27:39.938: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet5/0/28, changed state to down (Switch-4) Oct 1 09:27:48.819: %DTP-5-TRUNKPORTON: Port Gi3/0/26 has become dot1q trunk (Switch-3) Oct 1 09:27:52.388: %LINK-3-UPDOWN: Interface GigabitEthernet3/0/26, changed state to up Oct 1 09:27:53.391: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3/0/26, changed state to up Oct 1 09:28:18.294: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up Oct 1 09:30:23.788: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. Oct 1 09:30:23.788: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal revision summary on trunk: St5 (Switch-5) (Switch-5) Oct 1 09:30:23.788: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal revision summary on trunk: St4 (Switch-4) (Switch-4) Oct 1 09:30:23.813: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal revision summary on trunk: St3 (Switch-3) (Switch-3) Oct 1 09:30:23.788: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-5) Oct 1 09:30:23.792: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-2) Oct 1 09:30:23.792: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-4) Oct 1 09:30:23.813: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (Switch-3) Oct 1 09:30:54.833: %SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 4 from vtp function vtp_configure_domain: No such domain -Traceback= 555EECz 20332F8z 203BB00z 47F6D8z 486784z 4989C4z 2E31644z 2E2D340z Oct 1 09:31:08.485: %SYS-5-CONFIG_I: Configured from console by vty0 (127.0.0.4) Switch# Switch#