Last configuration change at 12:03:14 UTC Wed Nov 29 2017 by bobby
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Top_Router
!
boot-start-marker
boot-end-marker
!
enable password cisco1
!
aaa new-model
!
aaa session-id common
!
dot11 syslog
ip source-route
!
ip cef
!
no ip domain lookup
ip domain name Rodz.com
no ipv6 cef
!
multilink bundle-name authenticated
!
voice-card 0
!
crypto pki token default removal timeout 0
!
license udi pid CISCO2821 sn FHK0846F1UQ
username xxx privilege 15 password 0 xxx
!
redundancy
!
ip ssh version 2
!
interface GigabitEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 ip address dhcp
 duplex full
 speed 100
!
interface Serial0/0/0
 ip address 10.10.10.1 255.255.255.0
 no fair-queue
!
router rip
 version 2
 network 10.0.0.0
 network 192.168.0.0
 no auto-summary
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
control-plane
!
mgcp profile default
!
banner motd ^C This is a private netwok. Only authorized users. ^C
!
line con 0
 exec-timeout 0 0
 password cisco0
 logging synchronous
line aux 0
line vty 0 4
 transport input telnet ssh
!
scheduler allocate 20000 1000
end

Top_Router#