System Bootstrap, Version 8.5(3) Copyright (c) 1994-2008 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 524288 Kbytes of main memory Autoboot executing command: "boot " Initializing ATA monitor library... string is bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXI3.bin Loading image, please wait ... Initializing ATA monitor library... Self extracting the image... [OK] Self decompressing the image : ################################################################################################################################################################################################## [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Tue 27-Oct-09 11:34 by prod_rel_team Image text-base: 0x40101328, data-base: 0x42254F80 *Jun 9 14:18:46.079: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output. *Jun 9 14:18:43.619: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch Firmware compiled 08-Jun-09 11:01 by integ Build [100] *Jun 9 14:18:46.079: %OIR-SP-6-CONSOLE: Changing console ownership to route processor System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2009 by cisco Systems, Inc. Cat6k-Sup720/RP platform with 524288 Kbytes of main memory Download Start !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Download Completed! Booting the image. Self decompressing the image : ######################################################################################################################################################################################################################################################################################################################################################################## [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Tue 27-Oct-09 11:11 by prod_rel_team Image text-base: 0x40101328, data-base: 0x441EAC90 This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C6506-E (R7000) processor (revision 1.2) with 458720K/65536K bytes of memory. Processor board ID SAL1428MUNQ SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 1 Virtual Ethernet interface 50 Gigabit Ethernet interfaces 16 Ten Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). *Jun 9 14:19:01.847: RP: Currently running ROMMON from S (Gold) region *Jun 9 14:19:02.575: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology *Jun 9 14:19:06.551: %C6K_PLATFORM-4-RTC_OSCILLATOR: The oscillator in the Real Time Clock is disabled. Calendar won't be maintained during the powered down state of the switch. *Jun 9 14:19:06.855: %LINK-3-UPDOWN: Interface TenGigabitE Press RETURN to get started! thernet3/10, changed state to down *Jun 9 14:19:09.055: %SYS-5-CONFIG_I: Configured from memory by console *Jun 9 14:19:12.447: %SYS-5-RESTART: System restarted -- Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Tue 27-Oct-09 11:11 by prod_rel_team *Jun 9 14:19:12.467: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.10.140.5 Port 514 started - CLI initiated *Jun 9 14:19:17.379: %SNMP-5-COLDSTART: SNMP agent on host Core6506-2 is undergoing a cold start *Jun 9 14:18:46.443: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. *Jun 9 14:18:57.227: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology *Jun 9 14:18:57.239: SP: SP: Currently running ROMMON from S (Gold) region *Jun 9 14:19:08.185: %SW_VLAN-SP-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to bidc. *Jun 9 14:19:11.700: %SYS-SP-5-RESTART: System restarted -- Cisco IOS Software, s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Tue 27-Oct-09 11:34 by prod_rel_team *Jun 9 14:19:12.600: %OIR-SP-6-INSPS: Power supply inserted in slot 1 *Jun 9 14:19:12.704: %C6KPWR-SP-4-PSOK: power supply 1 turned on. *Jun 9 14:19:12.948: %OIR-SP-6-INSPS: Power supply inserted in slot 2 *Jun 9 14:19:13.048: %C6KPWR-SP-4-PSOK: power supply 2 turned on. *Jun 9 14:19:13.248: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies. *Jun 9 14:19:15.723: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high power mode Core6506-2>en Password: *Jun 9 14:19:23.918: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5. *Jun 9 14:19:24.018: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active. Core6506-2# Core6506-2# Core6506-2# *Jun 9 14:19:36.215: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...y Core6506-2#sh run *Jun 9 14:19:48.856: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics *Jun 9 14:19:49.531: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online Building configuration... Current configuration : 21201 bytes ! upgrade fpd auto version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service counters max age 5 ! hostname Core6506-2 ! boot-start-marker boot system flash:s72033-advipservicesk9_wan-mz.122-33.SXI4.bin boot system flash bootflash:s72033-advipservicesk9_wan-mz.122-33.SXI4.bin boot-end-marker !*Jun 9 14:20:53.595: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics... Jun 9 14:20:47.895: DFC3: Currently running ROMMON from S (Gosnmp-server community bidc123 RO ! ! control-plane ! ! dial-peer cor custom ! ! ! ! line con 0 line vty 0 4 exec-timeout 30 0 password 7 14151B0F0F557878 login local transport input telnet ssh transport output none line vty 5 15 login ! ! end ore6506-2#sh inventory NAME: "WS-C6506-E", DESCR: "Cisco Systems, Inc. Catalyst 6500 6-slot Chassis System" PID: WS-C6506-E , VID: V03, SN: SAL1428MUNQ NAME: "WS-C6K-VTT-E 1", DESCR: "VTT-E FRU 1" PID: WS-C6K-VTT-E , VID: , SN: SMT1419A669 NAME: "WS-C6K-VTT-E 2", DESCR: "VTT-E FRU 2" PID: WS-C6K-VTT-E , VID: , SN: SMT1419A660 NAME: "WS-C6K-VTT-E 3", DESCR: "VTT-E FRU 3" PID: WS-C6K-VTT-E , VID: , SN: SMT1419A653 NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1" PID: CLK-7600 , VID: , SN: SMT1418F105 NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2" PID: CLK-7600 , VID: , SN: SMT1418F105 NAME: "3", DESCR: "WS-X6716-10GE CEF720 16 port 10GE Rev. 1.0" PID: WS-X6716-10GE , VID: V02, SN: SAL1439UHPC NAME: "4", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 2.3" --More-- *Jun 9 14:21:11.671: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics *Jun 9 14:21:12.163: %OIR-SP-6-DOWNGRADE_EARL: Module 3 DFC installed is not identical to system PFC and will perform at current system operaPID: WS-X6748-GE-TX , VID: V01, SN: SAL0951819G NAME: "WS-F6700-CFC Centralized Forwarding Card sub-module of 4", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 2.0" PID: WS-F6700-CFC , VID: , SN: SAL10029XRH NAME: "5", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.10" PID: WS-SUP720-3B , VID: V09, SN: SAL1405AACP NAME: "msfc sub-module of 5", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 4.1" PID: WS-SUP720 , VID: , SN: SAL14049Y7A NAME: "WS-F6K-PFC3B Policy Feature Card 3 sub-module of 5", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.6" PID: WS-F6K-PFC3B , VID: V02, SN: SAL1413E2B7 NAME: "WS-C6506-E-FAN 1", DESCR: "Enhanced 6-slot *Jun 9 14:21:14.319: %LINK-3-UPDOWN: Interface TenGigabitEthernet3/10, changed state to down Fan Tray 1" PID: WS-C6506-E-FAN , VID: V03, SN: DCH133900AR NAME: "PS 1 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 1" PID: WS-CAC-3000W , VID: V02, SN: AZS14310B27 NAME: "PS 2 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 2" PID: WS-CAC-3000W , VID: V02, SN: AZS14310AXY Core6506-2# *Jun 9 14:21:14.587: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are now onlinesh mod Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 3 16 CEF720 16 port 10GE WS-X6716-10GE SAL1439UHPC 4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL0951819G 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1405AACP Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 3 001f.6cac.2b80 to 001f.6cac.2b8f 1.0 12.2(18r)S1 12.2(33)SXI3 Ok 4 0016.4747.0f74 to 0016.4747.0fa3 2.3 12.2(14r)S5 12.2(33)SXI3 Ok 5 001a.a22d.ad94 to 001a.a22d.ad97 5.10 8.5(3) 12.2(33)SXI3 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 3 Distributed Forwarding Card WS-F6700-DFC3C SAL1439UEYU 1.4 Ok 4 Centralized Forwarding Card WS-F6700-CFC SAL10029XRH 2.0 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B SAL1413E2B7 2.6 Ok 5 MSFC3 Daughterboard WS-SUP720 SAL14049Y7A 4.1 Ok Mod Online Diag Status ---- ------------------- 3 Pass 4 Pass 5 Pass Core6506-2# Core6506-2#sh ser Core6506-2#sh services ? WORD Show a specific LAT learned service | Output modifiers Core6506-2#sh vers Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Tue 27-Oct-09 11:11 by prod_rel_team ROM: System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1) Core6506-2 uptime is 4 minutes Uptime for this control processor is 4 minutes Time since Core6506-2 switched to active is 3 minutes System returned to ROM by power cycle at 14:28:59 UTC Sun Jun 9 2013 (SP by power on) System image file is "sup-bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXI3.bin" A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C6506-E (R7000) processor (revision 1.2) with 458720K/65536K bytes of memory. Processor board ID SAL1428MUNQ SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 20 Virtual Ethernet interfaces 50 Gigabit Ethernet interfaces 16 Ten Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102 Core6506-2#sh bootvar BOOT variable does not exist CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0x2102 Standby not ready to show bootvar Core6506-2# dir Directory of sup-bootdisk:/ 1 -rw- 33554432 Aug 12 2010 18:54:22 +00:00 sea_log.dat 2 -rw- 101601124 Aug 12 2010 18:56:12 +00:00 s72033-advipservicesk9_wan-mz.122-33.SXI3.bin 3 -rw- 33554432 Aug 12 2010 19:02:26 +00:00 sea_console.dat 4 -rw- 13236 Jun 9 2013 14:07:00 +00:00 startup-configa 5 -rw- 354788 Jun 9 2013 13:59:28 +00:00 crashinfo_20130609-135928-UTC 6 -rw- 338329 Jun 9 2013 13:59:54 +00:00 crashinfo_20130609-135954-UTC 7 -rw- 390928 Jun 9 2013 14:21:36 +00:00 crashinfo_20130609-142136-UTC 8 -rw- 116682084 Jun 9 2013 14:27:26 +00:00 s72033-advipservicesk9_wan-mz.122-33.SXI4.bin 9 -rw- 402120 Jun 9 2013 14:24:34 +00:00 crashinfo_20130609-142434-UTC 10 -rw- 402356 Jun 9 2013 14:49:22 +00:00 crashinfo_20130609-144923-UTC 11 -rw- 2930 Jun 9 2013 14:22:58 +00:00 crashinfo_20130609-142258-UTC 12 -rw- 2930 Jun 9 2013 14:40:30 +00:00 crashinfo_20130609-144031-UTC 13 -rw- 2931 Jun 11 2013 07:58:38 +00:00 crashinfo_20130611-075838-UTC 14 -rw- 2931 Jun 11 2013 11:33:36 +00:00 crashinfo_20130611-113336-UTC 15 -rw- 396885 Jun 9 2013 14:28:52 +00:00 crashinfo_20130609-142853-UTC 512073728 bytes total (224305152 bytes free) Core6506-2# *Jun 9 14:23:55.155: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 5 TestSPRPInbandPing consecutive failure count:5 *Jun 9 14:23:55.159: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=10% RP=1% Traffic=0%on netint_thr_active[0], Tx_Rate[4801], Rx_Rate[85], dev=1[IPv4, fail=5], 2[IPv4, fail=5], 3[IPv4, fail=5], 4[IPv6, fail=5]f t Core6506-2(config)#sh bootvar BOOT variable does not exist CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0x2102 Standby not ready to show bootvar Core6506-2# *Jun 9 14:24:45.155: %SYS-5-CONFIG_I: Configured from console by console Core6506-2# Core6506-2#sh *Jun 9 14:24:54.483: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.10 (Vlan170) is up: new adjacency modul Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 3 16 CEF720 16 port 10GE WS-X6716-10GE SAL1439UHPC 4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL0951819G 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1405AACP Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 3 001f.6cac.2b80 to 001f.6cac.2b8f 1.0 12.2(18r)S1 12.2(33)SXI3 Ok 4 0016.4747.0f74 to 0016.4747.0fa3 2.3 12.2(14r)S5 12.2(33)SXI3 Ok 5 001a.a22d.ad94 to 001a.a22d.ad97 5.10 8.5(3) 12.2(33)SXI3 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 3 Distributed Forwarding Card WS-F6700-DFC3C SAL1439UEYU 1.4 Ok 4 Centralized Forwarding Card WS-F6700-CFC SAL10029XRH 2.0 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B SAL1413E2B7 2.6 Ok 5 MSFC3 Daughterboard WS-SUP720 SAL14049Y7A 4.1 Ok Mod Online Diag Status ---- ------------------- 3 Pass 4 Pass 5 Minor Error Core6506-2# Core6506-2# Core6506-2#sh modul Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 3 16 CEF720 16 port 10GE WS-X6716-10GE SAL1439UHPC 4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL0951819G 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1405AACP Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 3 001f.6cac.2b80 to 001f.6cac.2b8f 1.0 12.2(18r)S1 12.2(33)SXI3 Ok 4 0016.4747.0f74 to 0016.4747.0fa3 2.3 12.2(14r)S5 12.2(33)SXI3 Ok 5 001a.a22d.ad94 to 001a.a22d.ad97 5.10 8.5(3) 12.2(33)SXI3 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 3 Distributed Forwarding Card WS-F6700-DFC3C SAL1439UEYU 1.4 Ok 4 Centralized Forwarding Card WS-F6700-CFC SAL10029XRH 2.0 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B SAL1413E2B7 2.6 Ok 5 MSFC3 Daughterboard WS-SUP720 SAL14049Y7A 4.1 Ok Mod Online Diag Status ---- ------------------- 3 Pass 4 Pass 5 Minor Error Core6506-2# Core6506-2# Core6506-2# Core6506-2# *Jun 9 14:26:01.215: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 5 TestSPRPInbandPing consecutive failure count:10 *Jun 9 14:26:01.215: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=10% RP=1% Traffic=0% netint_thr_active[0], Tx_Rate[5163], Rx_Rate[176], dev=1[IPv4, fail=10], 2[IPv4, fail=10], 3[IPv4, fail=10], 4[IPv6, fail=10] *Jun 9 14:26:04.171: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is down: peer restartedno % *Jun 9 14:26:31.143: %IP-4-DUPADDR: Duplicate address 10.10.130.3 on Vlan130, sourced by d0d0. Core6506-2# *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: 1Process Forced Exit- MAXRUN timer expired. *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: while executing *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: "if [catch {cli_exec $cli1(fd) "diagnostic action mod $card test TestSPRPInbandPing default"} result] { *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: error $result $errorInfo *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: } else { *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: set c..." *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: (file "tmpsys:/eem_policy/Mandatory.go_sprping.tcl" line 78) *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: Tcl policy execute failed: 1Process Forced Exit- MAXRUN timer expired. *Jun 9 14:27:01.339: %IP-4-DUPADDR: Duplicate address 10.10.60.3 on Vlan60, sourced by d0d0.fdaa.bec6conf *Jun 9 14:27:14.667: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is down: retry limit exceededig Core6506-2# *Jun 9 14:27:18.611: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is up: new Core6506-2# Core6506-2# *Jun 9 14:27:31.999: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is down: peer restarted %Software-forced reload 14:27:37 UTC Sun Jun 9 2013: Breakpoint exception, CPU signal 23, PC = 0x42C7A0F8 -------------------------------------------------------------------- Possible software fault. Upon reccurence, please collect crashinfo, "show tech" and contact Cisco Technical Support. -------------------------------------------------------------------- -Traceback= 42C7A0F8 42C77C4C 424DC124 424DD7A8 4285E378 4285E4D0 42C6D2DC $0 : 00000000, AT : 44800000, v0 : 46100000, v1 : 00000000 a0 : 47AE1A24, a1 : 00008100, a2 : 00000000, a3 : 00000000 t0 : 42C6D3C8, t1 : 34008101, t2 : 42C6D3F0, t3 : FFFF00FF t4 : 42C6D3C8, t5 : 500122E8, t6 : 00000000, t7 : 0000E9D8 s0 : 00000000, s1 : 446F0000, s2 : 00000000, s3 : 44670000 s4 : 44670000, s5 : 44670000, s6 : 43E40000, s7 : 00000001 t8 : 5001234C, t9 : 00000000, k0 : 00000000, k1 : 00000000 gp : 447FD434, sp : 50012418, s8 : 43E40000, ra : 42C77C4C EPC : 42C7A0F8, ErrorEPC : A0001300, SREG : 34008103 MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000 DATA_START : 0x441EAC90 Cause 00000824 (Code 0x9): Breakpoint exception Writing crashinfo to bootflash:crashinfo_20130609-142737-UTC === Flushing messages (14:27:37 UTC Sun Jun 9 2013) === Buffered messages: (last 4096 bytes only) *Jun 9 14:26:01.215: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 5 TestSPRPInbandPing consecutive failure count:10 *Jun 9 14:26:01.215: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=10% RP=1% Traffic=0% netint_thr_active[0], Tx_Rate[5163], Rx_Rate[176], dev=1[IPv4, fail=10], 2[IPv4, fail=10], 3[IPv4, fail=10], 4[IPv6, fail=10] *Jun 9 14:26:04.171: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is down: peer restarted *Jun 9 14:26:08.479: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is up: new adjacency *Jun 9 14:26:31.143: %IP-4-DUPADDR: Duplicate address 10.10.130.3 on Vlan130, sourced by d0d0.fdaa.becd *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: 1Process Forced Exit- MAXRUN timer expired. *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: while executing *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: "if [catch {cli_exec $cli1(fd) "diagnostic action mod $card test TestSPRPInbandPing default"} result] { *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: error $result $errorInfo *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: } else { *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: set c..." *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: (file "tmpsys:/eem_policy/Mandatory.go_sprping.tcl" line 78) *Jun 9 14:26:47.655: %HA_EM-6-LOG: Mandatory.go_sprping.tcl: Tcl policy execute failed: 1Process Forced Exit- MAXRUN timer expired. Queued messages: *Jun 9 14:27:42.387: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output. *Jun 9 14:27:36.571: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(551) 1: Neighbor 10.10.170.4 (Vlan170) is up: new adjacency *Jun 9 14:27:37.931: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP *** System received a Software forced crash *** signal= 0x17, code= 0x24, context= 0x461026c4 PC = 0x42c6d424, SP = 0x446f0480, RA = 0x413afa90 Cause Reg = 0øC!%©— ÊŠ¢Ò’ºÒ¢šr²ªÊÒ*šeMµSP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output. *Jun 9 14:27:43.659: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. *Jun 9 14:27:43.659: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor *** System received an unknown failure *** signal= 0x0, code= 0x0, context= 0x44260e44 PC = 0x4173ffbc, Cause = 0x1820, Status Reg = 0x34008102 System Bootstrap, Version 8.5(3) Copyright (c) 1994-2008 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 524288 Kbytes of main memory rommon 1 >