=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.06.04 15:04:13 =~=~=~=~=~=~=~=~=~=~=~= Chassis Type : WS-C4506 Power consumed by backplane : 0 Watts Mod Ports Card Type Model Serial No. ---+-----+--------------------------------------+------------------+----------- 1 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E JAE15330CIZ 2 18 1000BaseX (GBIC) WS-X4418-GB JAE054201J9 3 18 1000BaseX (GBIC) WS-X4418-GB JAE1517071X 4 0 Unsupported module WS-X4624-SFP-E JAE175009R7 5 18 1000BaseX (GBIC) WS-X4418-GB JAE0939LW8N 6 48 10/100/1000BaseT (RJ45) WS-X4448-GB-RJ45 JAB082505RP M MAC addresses Hw Fw Sw Status --+--------------------------------+---+------------+----------------+--------- 1 0011.20b8.4b40 to 0011.20b8.4b45 1.1 12.2(44r)SG1 15.2(2)E8 Ok 2 0002.b92e.9d5c to 0002.b92e.9d6d 1.0 Ok 3 0021.550e.1ff0 to 0021.550e.2001 1.4 Ok 4 e4c7.22d2.335c to e4c7.22d2.3373 2.0 Unsupport 5 0014.1ce9.38a0 to 0014.1ce9.38b1 1.2 Ok 6 0011.21f5.2490 to 0011.21f5.24bf 1.1 Ok Switch02# Switch02#dir bootflash: Directory of bootflash:/ 6 -rw- 38791882 May 28 2019 10:10:26 +02:00 cat4500e-ipbasek9-mz.152-2.E8.bin 131436544 bytes total (84672512 bytes free) Switch02#sh bootv Switch02#sh bootvar BOOT variable = bootflash:cat4500-ipbasek9-mz.150-2.SG6.bin#,1;bootflash:cat4500e-ipbasek9-mz.152-2.E8.bin,1; CONFIG_FILE variable does not exist BOOTLDR variable = Configuration register is 0x2102 Switch02#sh ver Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 15.2(2)E8, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2018 by Cisco Systems, Inc. Compiled Mon 22-Jan-18 06:32 by prod_rel_team ROM: 12.2(44r)SG10 Switch02 uptime is 39 minutes System returned to ROM by reload System image file is "bootflash:cat4500e-ipbasek9-mz.152-2.E8.bin" Darkside Revision 4, Jawa Revision 20, Tatooine Revision 141, Forerunner Revision 1.83 Last reload reason: Reload command This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C4506 (MPC8548) processor (revision 6) with 524288K bytes of memory. Processor board ID FOX0817024Y MPC8548 CPU at 1.33GHz, Supervisor 6-E Last reset from Reload 27 Virtual Ethernet interfaces 106 Gigabit Ethernet interfaces 2 Ten Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2102 Switch02#