#! /usr/binos/bin/packages_conf.sh sha1sum: 4a1c5458ba655837cbb815d5ff69557bb561b6f4 # sha1sum above - used to verify that this file is not corrupted. # # package.conf: provisioned software file for build 2018-10-26_18.33 # # NOTE: Editing this file by hand is not recommended. It is generated # as part of the build process, and is subject to boot-time # consistency checks. Automatically-produced package files are # guaranteed to pass those checks. Manually-maintained ones are # not. Because "nfs" and "mount" directives are processed first, # regardless of their position in the file, the recommended # approach is to keep a separate file containing JUST your # personal "nfs" and "mount" directives, and to append it to the # automatically-generated file. # # Note further that when SHA-1 checksum verification is enabled, # you will NOT be able to alter this file without updating the # SHA-1 sum. # # This file can contain three types of entries: # # # NFS directives (optional) # notes: NFS directives are processed before all others (mount, iso). # Multiple NFS directives may appear so long as they do not # conflict -- that is, specify the same source or mountpoint. # syntax: nfs : # example: nfs 127.0.0.1:/auto/some/nfs/path /auto/some/nfs/path # # # mount directives (optional) # notes: mount directives are processed after 'nfs' and before 'iso'. # One mount directive may appear for each F/S/B/P tuple # syntax: mount FRU SLOT BAY PACKAGE_NAME LINUX_PATH # example: mount rp 0 0 rp_base /auto/some/nfs/path/abs_soft/rp_base.ppc # # The specified LINUX_PATH may be local [sata disk] or # reference the NFS mounts since they are processed first. # # Mount directives cause the package-specific mount link to # be set to the specified path instead of to the mountpoint # in sw for the corresponding ISO. # # # iso directives (mandatory) # notes: iso directives are processed last: any package for which # a 'mount' directive does not appear will be mounted. # One iso directive may appear for each F/S/B/P tuple. # syntax: iso FRU SLOT BAY PACKAGE_NAME PACKAGE_FILE.bin # example: iso rp 0 0 rp_base rp_base.ppc.bin # # PACKAGE_FILE.bin is a path relative to the packages.conf # file. Although it supports sub-directories for development # purposes, in deployment the files will always be managed # as in the same directory as packages.conf so as to # guarantee that name collisions cannot occur. # # Note that the RP 0/1 distinction is a convenience for development # and testing as it allows us to have a packages.conf describe a # SW load that varies depending on whether the RP finds itself in # slot 0 or 1. # # The ISSU process *must* update *both* RP slots simultaneously so that # the RP will behave predictably whichever slot it finds itself on [e.g., # if package X is upgraded, and the RP is ejected and put into either # slot of a new chassis, we expect to see the upgraded X without regard # to slot]. # boot rp 0 0 rp_boot cat9k-rpboot.16.06.04a.SPA.pkg iso rp 0 0 rp_base cat9k-rpbase.16.06.04a.SPA.pkg iso rp 0 0 rp_daemons cat9k-rpbase.16.06.04a.SPA.pkg iso rp 0 0 rp_iosd cat9k-rpbase.16.06.04a.SPA.pkg iso rp 0 0 rp_security cat9k-rpbase.16.06.04a.SPA.pkg iso rp 0 0 rp_webui cat9k-webui.16.06.04a.SPA.pkg iso rp 0 0 rp_wlc cat9k-wlc.16.06.04a.SPA.pkg iso rp 0 0 srdriver cat9k-srdriver.16.06.04a.SPA.pkg iso rp 0 0 guestshell cat9k-guestshell.16.06.04a.SPA.pkg boot rp 1 0 rp_boot cat9k-rpboot.16.06.04a.SPA.pkg iso rp 1 0 rp_base cat9k-rpbase.16.06.04a.SPA.pkg iso rp 1 0 rp_daemons cat9k-rpbase.16.06.04a.SPA.pkg iso rp 1 0 rp_iosd cat9k-rpbase.16.06.04a.SPA.pkg iso rp 1 0 rp_security cat9k-rpbase.16.06.04a.SPA.pkg iso rp 1 0 rp_webui cat9k-webui.16.06.04a.SPA.pkg iso rp 1 0 rp_wlc cat9k-wlc.16.06.04a.SPA.pkg iso rp 1 0 srdriver cat9k-srdriver.16.06.04a.SPA.pkg iso rp 1 0 guestshell cat9k-guestshell.16.06.04a.SPA.pkg iso fp 0 0 fp cat9k-espbase.16.06.04a.SPA.pkg iso fp 1 0 fp cat9k-espbase.16.06.04a.SPA.pkg iso cc 0 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 1 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 2 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 3 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 4 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 5 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 6 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 7 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 8 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 9 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 10 0 cc cat9k-sipbase.16.06.04a.SPA.pkg iso cc 0 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 1 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 2 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 3 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 4 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 5 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 6 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 7 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 8 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 9 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 10 0 cc_spa cat9k-sipspa.16.06.04a.SPA.pkg iso cc 0 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 1 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 2 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 3 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 4 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 5 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 6 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 7 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 8 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 9 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg iso cc 10 0 cc_srdriver cat9k-cc_srdriver.16.06.04a.SPA.pkg # # -start- superpackage .pkginfo # # pkginfo: Name: rp_super # pkginfo: BuildTime: # pkginfo: ReleaseDate: Fri-26-Oct-18-23:03 # pkginfo: .BuildArch: x86_64 # pkginfo: BootArchitecture: i686 # pkginfo: .BootArch: i686 # pkginfo: RouteProcessor: cat9k # pkginfo: Platform: CAT9K # pkginfo: User: mcpre # pkginfo: PackageName: universalk9 # pkginfo: Build: 16.06.04a # pkginfo: .SupportedBoards: cat9k # pkginfo: .InstallModel: # pkginfo: .PackageRole: rp_super # pkginfo: .RestartRole: rp_super # pkginfo: .UnifiedPlatformList: passport,nyquist # pkginfo: CardTypes: # pkginfo: .CardTypes: # pkginfo: .BuildPath: /scratch/mcpre/release/BLD-V16_06_04A_FC3/binos/linkfarm/stage-cat9k/hard/rp_super_universalk9.x86_64 # pkginfo: .Version: 16.6.4a.0.46.1540604035..Everest # pkginfo: .InstallVersion: 1.0.0 # pkginfo: .InstallCapCommitSupport: yes # # -end- superpackage .pkginfo