hassis Type : WS-C4507R Power consumed by backplane : 40 Watts Mod Ports Card Type Model Serial No. ---+-----+--------------------------------------+------------------+----------- 1 2 Supervisor IV 1000BaseX (GBIC) WS-X4515 2 2 Supervisor IV 1000BaseX (GBIC) WS-X4515 3 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 5 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 7 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 M MAC addresses Hw Fw Sw Status --+--------------------------------+---+------------+----------------+--------- 1 0019.e8bf.ee00 to 0019.e8bf.ee01 4.3 12.2(31r)SGA 12.2(31)SG Ok 2 0019.e8bf.ee02 to 0019.e8bf.ee03 5.6 12.2(31r)SGA 12.2(53)SG4 Ok 3 001a.2f4c.84d0 to 001a.2f4c.84ff 2.3 Ok 5 001f.6cdc.40c0 to 001f.6cdc.40ef 2.4 Ok 7 0015.f92f.cab0 to 0015.f92f.cadf 2.1 Ok Mod Redundancy role Operating mode Redundancy status ----+-------------------+-------------------+------------------- 1 Active Supervisor RPR Active 2 Standby Supervisor RPR Standby cold Mod Submodule Model Serial No. Hw Status ----+-----------------------+-----------------+------------+----+--------- 1 Netflow Services Card WS-F4531 JAE1046F5MJ 2.2 Ok System Failures: ---------------- Power Supply: bad/off (see 'show power') ************* Redundant System Information : ------------------------------ Available system uptime = 6 weeks, 1 day, 4 hours, 26 minutes Switchovers system experienced = 3 Standby failures = 3 Last switchover reason = user forced Hardware Mode = Duplex Configured Redundancy Mode = Stateful Switchover Operating Redundancy Mode = RPR Maintenance Mode = Disabled Communications = Up Current Processor Information : ------------------------------- Active Location = slot 1 Current Software state = ACTIVE Uptime in current state = 27 minutes Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(31)SG, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Tue 14-Mar-06 17:13 by ssearch BOOT = bootflash:cat4500-entservicesk9-mz.122-53.SG4.bin,1; Configuration register = 0x2102 Peer Processor Information : ---------------------------- Standby Location = slot 2 Current Software state = STANDBY COLD Uptime in current state = 0 minutes Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(53)SG4, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Fri 25-Feb-11 14:17 by BOOT = bootflash:cat4500-entservicesk9-mz.122-53.SG4.bin,1; Configuration register = 0x2102 ***************** Redundant System Information : ------------------------------ Available system uptime = 6 weeks, 1 day, 4 hours, 26 minutes Switchovers system experienced = 3 Standby failures = 3 Last switchover reason = user forced Hardware Mode = Duplex Configured Redundancy Mode = Stateful Switchover Operating Redundancy Mode = RPR Maintenance Mode = Disabled Communications = Up Current Processor Information : ------------------------------- Active Location = slot 1 Current Software state = ACTIVE Uptime in current state = 27 minutes Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(31)SG, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Tue 14-Mar-06 17:13 by ssearch BOOT = bootflash:cat4500-entservicesk9-mz.122-53.SG4.bin,1; Configuration register = 0x2102 Peer Processor Information : ---------------------------- Standby Location = slot 2 Current Software state = STANDBY COLD Uptime in current state = 0 minutes Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(53)SG4, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Fri 25-Feb-11 14:17 by BOOT = bootflash:cat4500-entservicesk9-mz.122-53.SG4.bin,1; Configuration register = 0x2102 ********************************** Apr 14 21:24:47: %C4K_REDUNDANCY-6-DUPLEX_MODE: The peer Supervisor has been detected Uncompressed configuration from 15396 bytes to 41289 bytes Apr 14 21:25:02: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 2 (WS-X4515 S/N: JAE1002TPD0 Hw: 5.6) is online Apr 14 21:25:02: %C4K_REDUNDANCY-2-NON_SYMMETRICAL_REDUNDANT_SYSTEM: ACTIVE supervisor will operate in fallback redundancy mode rpr. Configured redundancy mode was sso. Apr 14 21:25:02: %C4K_REDUNDANCY-6-MODE: ACTIVE supervisor initializing for rpr mode Apr 14 21:25:02: %C4K_REDUNDANCY-2-IOS_VERSION_CHECK_FAIL: IOS version mismatch. Active supervisor version is 12.2(31)SG,. Standby supervisor version is 12.2(53)SG4,. Redundancy feature may not work as expected. Apr 14 21:25:02: %C4K_IOSMODPORTMAN-4-NFLABSENT: Netflow Services Card absent on STANDBY supervisor. Apr 14 21:25:03: %C4K_REDUNDANCY-3-COMMUNICATION: Communication with the peer Supervisor has been established Apr 14 21:25:03: %C4K_REDUNDANCY-5-CONFIGSYNC: The bootvar has been successfully synchronized to the standby supervisor Apr 14 21:25:03: %C4K_REDUNDANCY-5-CONFIGSYNC: The config-reg has been successfully synchronized to the standby supervisor Apr 14 21:25:03: %C4K_REDUNDANCY-5-CONFIGSYNC: The startup-config has been successfully synchronized to the standby supervisor Apr 14 21:25:03: %C4K_REDUNDANCY-5-CONFIGSYNC: The private-config has been successfully synchronized to the standby supervisor Apr 14 21:25:05: %C4K_REDUNDANCY-5-CONFIGSYNC_RATELIMIT: The vlan database has been successfully synchronized to the standby supervisor