[EtherDevice Server Configuration File] # Model Name ModelName= EDS-P506E-4PoE-2GTXSFP-T ################################################### # System Identification # ################################################### [System Identification] # [SwitchName]: Switch Name # --> max. length = 35 words SwitchName= IES-1800-1 # [Location]: Switch Location # --> max. length = 256 words Location= Switch Location # [SysDescr]: Switch Description # --> max. length = 30 words SysDescr= EDS-P506E-4PoE-2GTXSFP-T # [Contact]: Maintainer Contact Info # --> max. length = 30 words Contact= # [TelnetConsole]: Telnet Console # --> 0 : Disable Telnet Console # --> 1 : Enable Telnet Console TelnetConsole= 1 # [AGE TIME]: Set Age time # --> set age time (s) AgeTime= 300 ################################################### # Login Mode # ################################################### [Login Mode] # [Login Mode]: Console Login Mode # --> 0 : Menu # --> 1 : CLI LoginMode= 0 ################################################### # GARP Timer # ################################################### [GARP Timer] # [GARP_Join_Time]: GARP Join Time GARP_Join_Time= 200 # [GARP_Leave_Time]: GARP Leave Time GARP_Leave_Time= 600 # [GARP_Leaveall_Time]: GARP Leaveall Time GARP_Leaveall_Time= 10000 ################################################### # Password Setting # ################################################### [Password Setting] # [Account 1]: # --> Max. length = 16 words Active_1= 1 Authority_1= 1 AccountName_1= admin PasswordEncryp_1= 810448e13d53513dddd17d6c045025ab911840745a37665201104373d0d04180 # [Account 2]: # --> Max. length = 16 words Active_2= 1 Authority_2= 2 AccountName_2= user PasswordEncryp_2= 810448e13d53513dddd17d6c045025ab911840745a37665201104373d0d04180 ################################################### # Accessible IP # ################################################### [Accessible IP] # [Enable_AccessIp]: Enable the accessible IP list # --> "Disable" will allow all IP's connection # --> 0 : Disable # --> 1 : Enable Enable_AccessIp= 0 # [AccessIp]: Access IP list # ex: AccessIP_1 192.168.127.253/255.255.255.0 AccessIp_1= AccessIp_2= AccessIp_3= AccessIp_4= AccessIp_5= AccessIp_6= AccessIp_7= AccessIp_8= AccessIp_9= AccessIp_10= ################################################### # Port # ################################################### [Port] # [LAN Port Setting] # [Port_EN]: Enable/Disable Port flag. # --> 0 : Disable # --> 1 : Enable # [Port_Speed]: Port Speed. # --> 0 : AUTO # --> 1 : 100-FULL # --> 2 : 100-HALF # --> 3 : 10-FULL # --> 4 : 10-HALF # --> 5 : 1G-FULL # [Port_FDX]: Port FDX Flow Ctrl. # --> 0 : Disable # --> 1 : Enable # [Port_MDI]: Set Cable Type is MDI or MDIX. # --> 0 : AUTO # --> 1 : MDIX # --> 2 : MDI # [Port_Access_Control_Mode](PACM): Access control mode by port # --> 0 : MODE_NO_PORTSECURITY_NO_STICKY # --> 1 : MODE_PORTSECURITY # --> 2 : MODE_MAC_ADDRESS_STICKY # [Mac_Sticky_Violation_Port_Disable](MSVPD): Control violation port disable by port # --> 0 : MAC_STICKY_VIOLATION_PORT_DISABLE_DISABLED # --> 1 : MAC_STICKY_VIOLATION_PORT_DISABLE_ENABLED # [Port_TID]: The Bound Tracking Entry # --> Range 0 to 64 # --> (0 means it is not bound any tracking) # Note : # * If the port speed is AUTO(Max. 1G-FULL) or Force 1G-FULL, # the port's mdi/mdix setting must be AUTO ! # [Port 1] Port_1_EN= 1 Port_1_Speed= 0 Port_1_FDX= 0 Port_1_MDI= 0 Port_1_PACM= 0 Port_1_STICKY_LIMIT= 1 Port_1_STICKY_VPD= 0 Port_1_TID= 0 Port_1_NAME= # [Port 2] Port_2_EN= 1 Port_2_Speed= 0 Port_2_FDX= 0 Port_2_MDI= 0 Port_2_PACM= 0 Port_2_STICKY_LIMIT= 1 Port_2_STICKY_VPD= 0 Port_2_TID= 0 Port_2_NAME= # [Port 3] Port_3_EN= 1 Port_3_Speed= 0 Port_3_FDX= 0 Port_3_MDI= 0 Port_3_PACM= 0 Port_3_STICKY_LIMIT= 1 Port_3_STICKY_VPD= 0 Port_3_TID= 0 Port_3_NAME= # [Port 4] Port_4_EN= 1 Port_4_Speed= 0 Port_4_FDX= 0 Port_4_MDI= 0 Port_4_PACM= 0 Port_4_STICKY_LIMIT= 1 Port_4_STICKY_VPD= 0 Port_4_TID= 0 Port_4_NAME= # [Port G1] Port_G1_EN= 1 Port_G1_Speed= 5 Port_G1_FDX= 0 Port_G1_MDI= 0 Port_G1_PACM= 0 Port_G1_STICKY_LIMIT= 1 Port_G1_STICKY_VPD= 0 Port_G1_TID= 0 Port_G1_NAME= # [Port G2] Port_G2_EN= 1 Port_G2_Speed= 5 Port_G2_FDX= 0 Port_G2_MDI= 0 Port_G2_PACM= 0 Port_G2_STICKY_LIMIT= 1 Port_G2_STICKY_VPD= 0 Port_G2_TID= 0 Port_G2_NAME= ################################################### # MAC Address STICKY # ################################################### [MAC Address STICKY] MAS_num= 0 ################################################### # Network # ################################################### [Network] # [AUTOIP]: Auto IP Configuration # --> 0 : Disable # --> 1 : Enable DHCP # --> 2 : Enable BOOTP AUTOIP= 0 # [IPAddress]: IP Address # --> format : (xxx.xxx.xxx.xxx) # --> ex : 192.168.12.1 IPAddress= 10.255.118.30 # [Netmask]: Subnet Mask # --> format : (xxx.xxx.xxx.xxx) # --> ex : 255.255.0.0 Netmask= 255.255.255.0 # [Gateway]: Default Gateway # --> format : (xxx.xxx.xxx.xxx) # --> ex : 192.168.1.55 Gateway= 10.255.118.1 # [DNSIP]: DNS Server IP Address # --> format : (xxx.xxx.xxx.xxx) # --> ex : 192.168.1.56 DNSIP= 10.139.0.20 DNSIP1= # [IPV6AddressPrefix]: IPV6 Global Unicast Address Prefix # --> format : (xxxx:xxxx:xxxx:xxx) # --> ex : 1::1 IPV6AddressPrefix= ################################################### # Dhcp Retry Period # ################################################### DHCPRetryPeriod= 1 ################################################### # Turbo Ring DIP Switch # ################################################### [Turbo Ring DIP Switch] # [RingDipSw]: Turbo Ring DIP Switch # --> 0 : Disable Turbo Ring DIP Switch # --> 1 : Enable Turbo Ring DIP Switch RingDipSw= 1 # [RingDipSwVer]: Turbo Ring DIP Switch version # --> 0 : Set DIP Switch as Turbo Ring # --> 1 : Set DIP Switch as Turbo Ring V2 RingDipSwVer= 1 ################################################### # Port Trunking # ################################################### [Port Trunking] # [Port_TrunkType]: Trunking Group Type # --> 0 : Set to static # --> 1 : Set to LACP # [Port_TrunkGroup]: Trunking Group Set # --> 0 : Not set # --> 1 : Set to Trunking Group 1 (Trk1) # --> 2 : Set to Trunking Group 2 (Trk2) # --> 3 : Set to Trunking Group 3 (Trk3) # [Port 1] Port_1_TrunkType= 0 Port_1_TrunkGroup= 0 # [Port 2] Port_2_TrunkType= 0 Port_2_TrunkGroup= 0 # [Port 3] Port_3_TrunkType= 0 Port_3_TrunkGroup= 0 # [Port 4] Port_4_TrunkType= 0 Port_4_TrunkGroup= 0 # [Port G1] Port_G1_TrunkType= 0 Port_G1_TrunkGroup= 0 # [Port G2] Port_G2_TrunkType= 0 Port_G2_TrunkGroup= 0 ################################################### # SNMP # ################################################### [SNMP] # [SNMPVERSION]: SNMP Version # --> 0: V1, V2c, V3 # --> 1: V1, V2c # --> 2: V3 only SNMPVERSION= 1 # [V1_V2c_RCommunity]: V1,V2c Read Community # --> max. length = 30 words V1_V2c_RCommunity= public # [V1_V2c_RWCommunity]: V1,V2c Read/Write Community # --> max. length = 30 words V1_V2c_RWCommunity= private # [Admin_AuthType]: Admin Auth. Type # --> 0: NO-AUTH # --> 1: MD5 # --> 2: SHA # Note : # If you want to set MD5 or SHA, # the admin password must be more than 8 words in the switch. Admin_AuthType= 0 # [Admin_ADEEnable]: Admin Auth. Data Encryption Enable # --> 0: Disable # --> 1: Enable # Note : # If you want to enable data encryption for admin, # the admin data encryption key must be more than 8 words in the configuration file. Admin_ADEEnable= 0 # [Admin_DataEncryption]: Admin Data Encryption Key # --> max. length = 30 words # --> min. length = 8 words Admin_DataEncryption= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab59d667a0f43c486ee8d3ea4d4510623d # [User_AuthType]: User Auth. Type # --> 0: NO-AUTH # --> 1: MD5 # --> 2: SHA # Note : # If you want to set MD5 or SHA, # the user password must be more than 8 words in the configuration file. User_AuthType= 0 # [User_ADEEnable]: User Auth. Data Encryption Enable # --> 0: Disable # --> 1: Enable # Note : # If you want to enable data encryption for user, # the user data encryption key must be more than 8 words in the configuration file. User_ADEEnable= 0 # [User_DataEncryption]: User Data Encryption Key # --> max. length = 30 words # --> min. length = 8 words User_DataEncryption= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab59d667a0f43c486ee8d3ea4d4510623d # [TRAP Serer]: Trap Server IP Address # --> IP or String (Max. length = 30 words.) # [TRAP Community]: TRAP Community # --> TRAP Community name (max. length = 30 words.) # [1st] : TRAP_Server= TRAP_Community= public # [2nd] : TRAP_Server1= TRAP_Community1= public # [TRAP Version]: Version # --> 0: SNMPv1 Trap # --> 1: SNMPv2 Notification # --> 3: SNMPv3 Notification Trap_Version= 0 # [Inform Enable]: Enable Trap Inform mode # --> 0 : Trap # --> 1 : Inform Inform_Enable= 0 # [Inform Retries] # --> Inform Retries Times (1 ~ 99 ) Inform_Retries= 3 # [Inform Timeout] # --> Inform Message Timeout (1 ~ 300 ) secs Inform_Timeout= 10 # [SNMPv3 TAPSs/INFORMs USM Configuration] # --> SNMPv3 TAPSs/INFORMs Security Username SNMPv3_Username= # --> SNMPv3 TAPSs/INFORMs Security Auth. Type SNMPv3_AuthType= 0 # --> 0: NO-AUTH # --> 1: MD5 # --> 2: SHA # --> SNMPv3 TAPSs/INFORMs Security Auth. Key SNMPv3_AuthKey= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab2825b6a337e238d7c7689f9360f74440 # --> SNMPv3 TAPSs/INFORMs Security Priv. Type # --> 0: Disable # --> 1: Enable DES SNMPv3_PrivType= 0 # --> SNMPv3 TAPSs/INFORMs Security Priv. Key SNMPv3_PrivKey= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab2825b6a337e238d7c7689f9360f74440 ################################################### # LLDP # ################################################### [LLDP] # [LLDP Enable]: Enable LLDP Agent # --> 0 : Disable # --> 1 : Enable LLDP_Enable= 1 # [LLDP TX Interval] # --> LLDP TX Interval (5 ~ 32768 secs ) LLDP_TX_Interval= 5 ################################################### # System File Update # ################################################### ################################################### # TFTP # ################################################### [System File Update] # [TftpSrv]: TFTP Server IP/Name # --> max. length = 30 words. TftpSrv= # [TftpConfigPN]: TFTP Config Path/Name # --> max. length = 30 words. TftpConfigPN= # [TftpFirmPN]: TFTP Firm Path/Name # --> max. length = 30 words. TftpFirmPN= # [TftpLogPN]: TFTP Log Path/Name # --> max. length = 30 words. TftpLogPN= ################################################### # Auto Backup Configuration # ################################################### [Auto Backup Configuration] # [ABCAutoImport]: Auto load the ABC's Configuration when system boot # --> 0 : Disable Auto load the ABC's configuration # --> 1 : Enable Auto load the ABC's configuration ABCAutoImport= 1 # [ABCAutoBackup]: Auto backup to ABC-02 when configuration change # --> 0 : Disable Auto backup to ABC-02 when configuration change # --> 1 : Enable Auto backup to ABC-02 when configuration change ABCAutoBackup= 0 # [ABCAutoBackupLog]: Auto backup event log to ABC-02 # --> 0 : Disable Auto backup event log to ABC-02 # --> 1 : Enable Auto backup event log to ABC-02 ABCAutoBackupLog= 0 ################################################### # Time # ################################################### [Time] # [TimeZone]: Time Zone # --> 0 : (GMT-12:00)Eniwetok, Kwajalein # --> 1 : (GMT-11:00)Midway Island, Samoa # --> 2 : (GMT-10:00)Hawaii # --> 3 : (GMT-09:00)Alaska # --> 4 : (GMT-08:00)Pacific Time (US & Canada); Tijuana # --> 5 : (GMT-07:00)Arizona # --> 6 : (GMT-07:00)Mountain Time (US & Canada) # --> 7 : (GMT-06:00)Central Time (US & Canada) # --> 8 : (GMT-06:00)Mexico City, Tegucigalpa # --> 9 : (GMT-06:00)Saskatchewan # --> 10 : (GMT-05:00)Bogota, Lima, Quito # --> 11 : (GMT-05:00)Eastern Time (US & Canada) # --> 12 : (GMT-05:00)Indiana (East) # --> 13 : (GMT-04:00)Atlantic Time (Canada) # --> 14 : (GMT-04:00)Caracas, La Paz # --> 15 : (GMT-04:00)Santiago # --> 16 : (GMT-03:30)Newfoundland # --> 17 : (GMT-03:00)Brasilia # --> 18 : (GMT-03:00)Buenos Aires, Georgetown # --> 19 : (GMT-02:00)Mid-Atlantic # --> 20 : (GMT-01:00)Azores, Cape Verde Is. # --> 21 : (GMT)Casablanca, Monrovia # --> 22 : (GMT)Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London # --> 23 : (GMT+01:00)Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna # --> 24 : (GMT+01:00)Belgrade, Bratislava, Budapest, Ljubljana, Prague # --> 25 : (GMT+01:00)Brussels, Copenhagen, Madrid, Paris, Vilnius # --> 26 : (GMT+01:00)Sarajevo, Skopje, Sofija, Warsaw, Zagreb # --> 27 : (GMT+02:00)Athens, Istanbul, Minsk # --> 28 : (GMT+02:00)Bucharest # --> 29 : (GMT+02:00)Cairo # --> 30 : (GMT+02:00)Harare, Pretoria # --> 31 : (GMT+02:00)Helsinki, Riga, Tallinn # --> 32 : (GMT+02:00)Jerusalem # --> 33 : (GMT+03:00)Baghdad, Kuwait, Riyadh # --> 34 : (GMT+03:00)Moscow, St. Petersburg, Volgograd # --> 35 : (GMT+03:00)Mairobi # --> 36 : (GMT+03:30)Tehran # --> 37 : (GMT+04:00)Abu Dhabi, Muscat # --> 38 : (GMT+04:00)Baku, Tbilisi # --> 39 : (GMT+04:30)Kabul # --> 40 : (GMT+05:00)Ekaterinburg # --> 41 : (GMT+05:00)Islamabad, Karachi, Tashkent # --> 42 : (GMT+05:30)Bombay, Calcutta, Madras, New Delhi # --> 43 : (GMT+06:00)Astana, Almaty, Dhaka # --> 44 : (GMT+06:00)Colombo # --> 45 : (GMT+07:00)Bangkok, Hanoi, Jakarta # --> 46 : (GMT+08:00)Beijing, Chongqing, Hong Kong, Urumqi # --> 47 : (GMT+08:00)Perth # --> 48 : (GMT+08:00)Singapore # --> 49 : (GMT+08:00)Taipei # --> 50 : (GMT+09:00)Osaka, Sapporo, Tokyo # --> 51 : (GMT+09:00)Seoul # --> 52 : (GMT+09:00)Yakutsk # --> 53 : (GMT+09:30)Adelaide # --> 54 : (GMT+09:30)Darwin # --> 55 : (GMT+10:00)Brisbane # --> 56 : (GMT+10:00)Canberra, Melbourne, Sydney # --> 57 : (GMT+10:00)Guam, Port Moresby # --> 58 : (GMT+10:00)Hobart # --> 59 : (GMT+10:00)Vladivostok # --> 60 : (GMT+11:00)Magadan, Solomon Is., New Caledonia # --> 61 : (GMT+12:00)Auckland, Wllington # --> 62 : (GMT+12:00)Fiji, Kamchatka, Marshall Is. TimeZone= 33 # [ClockSource]: System Clock Source # --> Local = 0, SNTP = 1, NTP = 2. ClockSource= 2 # [1stTimeSrv]: 1st Time Server IP/Name # --> max. length = 30 words. 1stTimeSrv= time.kfupm.edu.sa # [1stTimeSrvAuthenticate]: Authentication for time sources # [authenticate] [keyId] # [authenticate]: Authentication for time sources # --> 0 : Disable # --> 1 : Enable # [keyId]: Key number # --> Range 1 to 65535 # ex: 1stTimeSrvAuthenticate 1 12 # ==> authenticate:enable ,keyId:12 1stTimeSrvAuthenticate= 0 # [2ndTimeSrv]: 2nd Time Server IP/Name # --> max. length = 30 words. 2ndTimeSrv= # [2ndTimeSrvAuthenticate]: Authentication for time sources # [authenticate] [keyId] # [authenticate]: Authentication for time sources # --> 0 : Disable # --> 1 : Enable # [keyId]: Key number # --> Range 1 to 65535 # ex: 2ndTimeSrvAuthenticate 1 12 # ==> authenticate:enable ,keyId:12 2ndTimeSrvAuthenticate= 0 # [QueryTimePeriod]: Time Server Query Period # --> Range 1 to 9999 # --> unit is second. QueryTimePeriod= 600 # [NTPAuthenticate]: Authenticate time sources # --> 0 : Disable # --> 1 : Enable NTPAuthenticate= 0 # [NTPAuthenticationKey]: Authentication key for trusted time sources # [keyId] [type] [keyString] [trusted] # [keyId]: Key number # --> Range 1 to 65535 # [type]: authentication type # --> 0 : md5 # [keyString]: Authentication key # --> 32 bytes len # [trusted]: enable trusted # --> 0 : Disable # --> 1 : Enable # ex: NTPAuthenticationKey_1 12 0 aNiceKey 1 # ==> key id:12 ,type:md5 , keyString:aNiceKey ,trusted:enable NTPAuthenticationKey_1= NTPAuthenticationKey_2= NTPAuthenticationKey_3= NTPAuthenticationKey_4= NTPAuthenticationKey_5= # [NTPServerEnable]: NTP/SNTP Server Enable # --> 0 : Disable # --> 1 : Enable NTPServerEnable= 1 ################################################### # Daylight Saving # ################################################### # [Offset]: # --> Range 0 to 12 dst_offset= 0 # [StartMonth]: # --> Range 1 to 12 start_month= 0 # [StartWeek]: # --> Range 1 to 6 start_week= 0 # [StartDay]: # --> Range 0 to 6 start_day= 0 # [StartHour]: # --> Range 0 to 23 start_hour= 0 # [EndMonth]: # --> Range 1 to 12 end_month= 0 # [EndWeek]: # --> Range 1 to 4 & 6(LastWeek) end_week= 0 # [EndDay]: # --> Range 0 to 6 end_day= 0 # [EndHour]: # --> Range 0 to 23 end_hour= 0 ################################################### # PTP # ################################################### [PTP] # [PTPEnable]: PTP Enable. # --> 0 : Disable # --> 1 : Enable PTPEnable= 0 # [PTPMode]: PTP Clock Mode. # --> 0 : v1 BC mode # --> 1 : v2 E2E 2-step TC mode # --> 3 : v2 P2P TC mode # --> 4 : v2 E2E BC mode # --> 5 : v2 P2P BC mode PTPMode= 0 # [PTPSyncInterval]: PTP log sync interval. # --> 0 : 1 sec # --> 1 : 2 sec # --> 3 : 8 sec # --> 4 : 16 sec # --> 6 : 64 sec PTPSyncInterval= 0 # [PTPDomainNumber]: PTP domain number(v2) or subdomain name(v1) # --> input 0~3 # --> 0(_DFLT) # --> 1(_ALT1) # --> 2(_ALT2) # --> 3(_ALT3) PTPDomainNumber= 0 # [PTPTransport]: PTP Transport Type. # --> 0 : 802.3/ethernet # --> 1 : IPv4 PTPTransport= 1 # [PTPlogMinDelayReqInterval]: PTP log min delay req interval. # --> 0 : 1 sec # --> 1 : 2 sec # --> 2 : 4 sec # --> 3 : 8 sec # --> 4 : 16 sec # --> 5 : 32 sec PTPlogMinDelayReqInterval= 0 # [PTPlogMinPdelayReqInterval]: PTP log min pdelay req interval. # --> -1 : 512 ms # --> 0 : 1 sec # --> 1 : 2 sec # --> 2 : 4 sec # --> 3 : 8 sec # --> 4 : 16 sec # --> 5 : 32 sec PTPlogMinPdelayReqInterval= 0 # [PTPlogAnnounceInterval]: PTP log announce interval. # --> 0 : 1 sec # --> 1 : 2 sec # --> 2 : 4 sec # --> 3 : 8 sec # --> 4 : 16 sec PTPlogAnnounceInterval= 1 # [PTPannounceReceiptTimeout]: PTP log announce receipt timeout. # --> 2 # --> 3 # --> 4 # --> 5 # --> 6 # --> 7 # --> 8 # --> 9 # --> 10 PTPannounceReceiptTimeout= 3 # [PTPPriority1]: PTP priority1 # --> 0~255 PTPPriority1= 128 # [PTPPriority2]: PTP priority2 # --> 0~255 PTPPriority2= 128 # [PTPclockClass]: PTP clock class # --> 0~255 PTPclockClass= 248 # [PTPtimescale]: PTP timescale # --> 0 : ARB # --> 1 : PTP PTPtimescale= 1 # [PTPleap59]: PTP leap59 # --> 0 : False # --> 1 : True PTPleap59= 0 # [PTPleap61]: PTP leap61 # --> 0 : False # --> 1 : True PTPleap61= 0 # [PTPutc_offset_valid]: PTP UTC offset valid # --> 0 : False # --> 1 : True PTPutc_offset_valid= 0 # [PTPutc_offset]: PTP UTC offset # --> 0~65535 PTPutc_offset= 0 # [PTParb_time]: PTP ARB time # --> 0~2147483647 PTParb_time= 0 ################################################### # PTP:Port Setting # ################################################### # [PTPPortEnable]: PTP Port Enable. # --> 0 : Disable # --> 1 : Enable PTPPortEnable_1= 0 PTPPortEnable_2= 0 PTPPortEnable_3= 0 PTPPortEnable_4= 0 PTPPortEnable_5= 0 PTPPortEnable_6= 0 ################################################### # Security # ################################################### [Security] ################################################### # User Login Auth Setting # ################################################### # [Auth_login_Option]: User Login Option # --> 1 : TACACS+, Local # --> 2 : RADIUS, Local # --> 3 : TACACS+ # --> 4 : RADIUS # --> 5 : Local Auth_Login_Mode= 5 ################################################### # Auth Server Setting # ################################################### # [Auth_Tacacs_Server]: Tacacs+ Server # --> max. length = 30 words Auth_Tacacs_Server= # [Auth_Tacacs_SerPort]: Tacacs+ Server Port # --> Range 1 to 65535 Auth_Tacacs_SerPort= 49 # [Auth_Tacacs_SerKeyEncryp]: Tacacs+ Server Key # --> max. length = 32 words Auth_Tacacs_SerKeyEncryp= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab2825b6a337e238d7c7689f9360f74440 # [Auth_Tacacs_SerType]: Tacacs+ Server Auth Type # --> 0 : ASCII # --> 1 : PAP # --> 2 : CHAP # --> 4 : MSCHAP Auth_Tacacs_SerType= 0 # [Auth_Tacacs_SerTimeout]: Tacacs+ Server Timeout # --> Range 1 to 75 Auth_Tacacs_SerTimeout= 5 # [Auth_Radius_Server]: Radius Server # --> max. length = 30 words Auth_Radius_Server= # [Auth_Radius_SerPort]: Radius Server Port # --> Range 1 to 65535 Auth_Radius_SerPort= 1812 # [Auth_Radius_SerKeyEncryp]: Radius Server Key # --> max. length = %d words Auth_Radius_SerKeyEncryp= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab2825b6a337e238d7c7689f9360f74440 # [Auth_Radius_Auth_Type]: Radius Login Auth type # --> 0 : Radius PAP # --> 1 : Radius CHAP Auth_Radius_Login_Type= 0 # [Auth_Radius_SerTimeout]: Radius Server Timeout # --> Range 1 to 255 Auth_Radius_SerTimeout= 5 ################################################### # Static Port Lock # ################################################### [Static Port Lock] # UMAC [Unicast MAC address] [port] [vid] # --> Max unicast mac is 128 # [Unicast MAC address] # --> format: XX-XX-XX-XX-XX-XX # [port] # --> port : 1~max # [vid] # --> range : 1~4094 # --> 1,...,6 # ex: UMAC_XX 00-90-E8-01-02-03,1 vlan:1 # begin-of-list # end-of-list ################################################### # 802.1X # ################################################### [802.1X] ################################################### # 802.1X Settings # ################################################### # [Dot1x_DataBase]: DataBase Option # --> 1 : Local # --> 2 : Radius # --> 3 : Radius,Local Dot1x_DataBase= 1 # [Dot1x_sameAsAuthServer]: Same as authorization server. # --> 0 : No. # --> 1 : Yes. Dot1x_sameAsAuthServer= 0 # [Radius_Server]: Radius Server= # --> max. length = 30 words Radius_1st_Server= Radius_2nd_Server= # [Radius_SerPort]: Radius Server Port # --> Range 1 to 65535 Radius_1st_SerPort= 1812 Radius_2nd_SerPort= 1812 # [Radius_SerKeyEncryp]: Radius Server Key # --> max. length = %d words Radius_1st_SerKeyEncryp= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab2825b6a337e238d7c7689f9360f74440 Radius_2nd_SerKeyEncryp= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab2825b6a337e238d7c7689f9360f74440 # [Dot1x_ReAuth]: Dot1x ReAuth # --> 0 : Disable # --> 1 : Enable Dot1x_ReAuth= 1 # [Dot1x_ReAuthPeriod]: Dot1x ReAuth # --> Range 60 to 65535 # --> unit is second. Dot1x_ReAuthPeriod= 3600 # [Dot1x_EN]: Dot1x Enable # --> 0 : Disable # --> 1 : Enable # [Port 1] Dot1x_EN_1= 0 # [Port 2] Dot1x_EN_2= 0 # [Port 3] Dot1x_EN_3= 0 # [Port 4] Dot1x_EN_4= 0 # [Port G1] Dot1x_EN_G1= 0 # [Port G2] Dot1x_EN_G2= 0 ################################################### # 802.1X Loacl DataBase # ################################################### # [User List]: Dot1x Loacl DataBase List # [Dot1xDB_User]: User name # [Dot1xDB_Passwd]: User password # [Dot1xDB_Desr]: User description # ex: Dot1xDB_User_1 abcuser # ex: Dot1xDB_Passwd_1 123 # ex: Dot1xDB_Desr_1 operator # begin-of-list # end-of-list ################################################### # MAB Settings # ################################################### ################################################### [MAB] # [MAB_DataBase]: DataBase Option # --> 1 : Local # --> 2 : Radius MAB_DataBase= 1 # [MAB_ReAuth]: MAB ReAuth # --> 0 : Disable # --> 1 : Enable MAB_ReAuth= 0 # [MAB_ReAuth_Period]: MAB ReAuth Period # --> Range 60 to 65535 # --> unit is second. MAB_ReAuth_Period= 3600 # [MAB_ReStart]: MAB ReStart # --> 0 : Disable # --> 1 : Enable MAB_ReStart= 0 # [MAB_ReStart_Period]: MAB ReStart Period # --> Range 5 to 300 # --> unit is second. MAB_ReStart_Period= 60 # [Port 1] MAB_EN_1= 0 # [Port 2] MAB_EN_2= 0 # [Port 3] MAB_EN_3= 0 # [Port 4] MAB_EN_4= 0 # [Port G1] MAB_EN_G1= 0 # [Port G2] MAB_EN_G2= 0 ################################################### # Communication redundancy # # Establish Ethernet communication redundant path # ################################################### [Communication redundancy] # [RedundantProtol]: Protocol of Redundancy # --> 0 : RSTP (IEEE 802.1D 2004) # --> 1 : Turbo Ring # --> 2 : Turbo Ring V2 # --> 3 : Turbo Chain # --> 4 : MSTP (IEEE 802.1s) RedundantProtol= 3 ################################################### # Turbo Chain Setting. # ################################################### # [IsRole]: Set to be Role # --> 1 : Head # --> 2 : Member # --> 3 : Tail IsRole= 1 # [TurboChainPort1]: 1st Member port # --> 1,...,6,...,Trk3 TurboChainPort1= G1 # [TurboChainPort2]: 2nd Member port # --> 1,...,6,...,Trk3 TurboChainPort2= G2 ################################################### # Turbo Ring Setting. # ################################################### # [IsMaster]: Set to be Master # --> 0 : NO # --> 1 : Yes IsMaster= 0 # [TurboRingPort1]: 1st Redundant port # --> 1,...,6,...,Trk3 TurboRingPort1= G1 # [TurboRingPort2]: 2nd Redundant port # --> 1,...,6,...,Trk3 TurboRingPort2= G2 # [Coupling]: Redundant Ring Coupling # --> 0 : Disable # --> 1 : Enable Coupling= 0 # [CouplingPort]: Coupling Port # --> 1,...,6,...,Trk3 CouplingPort= 3 # [ControlPort]: Coupling Control Port # --> 1,...,6,...,Trk3 ControlPort= 4 ################################################### # Turbo Ring V2 Setting. # ################################################### # TurboRingV2Setting # [Ring1]: Ring 1 # --> 0 : Disable # --> 1 : Enable Ring1= 1 # [Ring1_Master]: Set to be Master # --> 0 : NO # --> 1 : Yes Ring1_Master= 0 # [Ring1_RedPort1]: Ring 1 Redundant Ports 1st Port # --> 1,2,3,....6 Ring1_RedPort1= G1 # [Ring1_RedPort2]: Ring 1 Redundant Ports 2nd Port # --> 1,2,3,....6 Ring1_RedPort2= G2 # [Ring2]: Ring 2 # --> 0 : NO # --> 1 : Yes Ring2= 0 # [Ring2_Master]: Set to be Master # --> 0 : NO # --> 1 : Yes Ring2_Master= 0 # [Ring2_RedPort1]: Ring 2 Redundant Ports 1st Port # --> 1,2,3,....6 Ring2_RedPort1= 3 # [Ring2_Port2]: Ring 2 Redundant Ports 2nd Port # --> 1,2,3,....6 Ring2_RedPort2= 4 # [CouplingMode]: Disable and Set Coupling Mode # --> 0 : Disable # --> 1 : Dual Homing # --> 2 : Ring Coupling(backup) # --> 3 : Ring Coupling(primary) CouplingMode= 0 # [Coupling_1st]: Coupling 1st Port # --> 1,2,3,....6 Coupling_1st= 3 # [Coupling_2nd]: Coupling 2nd Port # --> 1,2,3,....6 Coupling_2nd= 4 ################################################### # RSTP (IEEE 802.1D 2004) Setting. # ################################################### [RSTP] # [BridgeId]: Bridge Id # --> 0 : 0 # --> 1 : 4096 # --> 2 : 8192 # --> 3 : 12288 # --> 4 : 16384 # --> 5 : 20480 # --> 6 : 24576 # --> 7 : 28672 # --> 8 : 32768 # --> 9 : 36864 # --> 10 : 40960 # --> 11 : 45056 # --> 12 : 49152 # --> 13 : 53248 # --> 14 : 57344 # --> 15 : 61440 BridgeId= 8 # [HelloTime]: Hello Time # --> Range 1 to 2 # --> unit is second. HelloTime= 2(sec.) # [MaxAge]: Max Age # --> Range 6 to 40 # --> unit is second. MaxAge= 20(sec.) # [Forwarding]: Forwarding Delay # --> Range 4 to 30 # --> unit is second. Forwarding= 15(sec.) # [STP_EN]: Enable/Disable RSTP (IEEE 802.1D 2004) function on the port. # --> 0 : Disable # --> 1 : Enable # [STP_EDGE]: Edge Port configuration # --> 0 : Auto # --> 1 : True # --> 2 : False # [STP_ID] : Port Priority # --> 0 : 0 # --> 1 : 16 # --> 2 : 32 # --> 3 : 48 # --> 4 : 64 # --> 5 : 80 # --> 6 : 96 # --> 7 : 112 # --> 8 : 128 # --> 9 : 144 # --> 10 : 160 # --> 11 : 176 # --> 12 : 192 # --> 13 : 208 # --> 14 : 224 # --> 15 : 240 # [STP_Cost] # --> Range 1 to 200000000 # [Port 1] STP_EN_1= 0 STP_EDGE_1= 0 STP_ID_1= 8 STP_Cost_1= 200000 # [Port 2] STP_EN_2= 0 STP_EDGE_2= 0 STP_ID_2= 8 STP_Cost_2= 200000 # [Port 3] STP_EN_3= 0 STP_EDGE_3= 0 STP_ID_3= 8 STP_Cost_3= 200000 # [Port 4] STP_EN_4= 0 STP_EDGE_4= 0 STP_ID_4= 8 STP_Cost_4= 200000 # [Port G1] STP_EN_G1= 0 STP_EDGE_G1= 0 STP_ID_G1= 8 STP_Cost_G1= 20000 # [Port G2] STP_EN_G2= 0 STP_EDGE_G2= 0 STP_ID_G2= 8 STP_Cost_G2= 20000 ################################################### # MSTP (IEEE 802.1s) Setting. # ################################################### [MSTP] # [MSTP_EN] :Mstp Enable/Disabler # --> 0 : Disable # --> 1 : Enable MSTP_EN= 0 # [BridgePrio]: Bridge Prio # --> 0 : 0 # --> 1 : 4096 # --> 2 : 8192 # --> 3 : 12288 # --> 4 : 16384 # --> 5 : 20480 # --> 6 : 24576 # --> 7 : 28672 # --> 8 : 32768 # --> 9 : 36864 # --> 10 : 40960 # --> 11 : 45056 # --> 12 : 49152 # --> 13 : 53248 # --> 14 : 57344 # --> 15 : 61440 CistBridgePrio= 8 # [MstiBridgeId] # --> instid 1 to 16, # --> priority same with BridgeID # [MstHelloTime][MstMaxAge][MstForwarding]: # --> 2*(MstForwarding - 1) >= MstMaxAge # --> MstMaxAge >= 2*(MstHelloTime +1) # [MstHelloTime]: Hello Time # --> Range 1 to 10, # --> unit is second. MstHelloTime= 2(sec.) # [MstMaxAge]: Max Age # --> Range 6 to 40, # --> unit is second. MstMaxAge= 20(sec.) # [MstMaxHops]: Max Hops # --> Range 6 to 40, # --> unit is second. MstMaxHops= 20(sec.) # [MstForwarding]: Forwarding Delay # --> Range 4 to 30, # --> unit is second. MstForwarding= 15(sec.) # [MstRevision]: Revision # --> Range 0 to 65535 MstRevision= 0 # [MstRName]: Mst Region Name # --> 32 bytes len MstRName= MSTP # [MSTI_VID_MAPPING]: mstp vlan instance mapping # --> vid Range 1-4096 # --> total vlan no. 64 # --> instance id 1-16 # [MSTP_PORT_EN]: Enable/Disable MSTP(IEEE 802.1s) function on the port. # --> 0 : Disable # --> 1 : Enable # [MSTP_PORT_CIST_PRI] [MSTP_PORT_MSTI_PRI]: Port Priority. # --> 0 : 0 # --> 1 : 16 # --> 2 : 32 # --> 3 : 48 # --> 4 : 64 # --> 5 : 80 # --> 6 : 96 # --> 7 : 112 # --> 8 : 128 # --> 9 : 144 # --> 10 : 160 # --> 11 : 176 # --> 12 : 192 # --> 13 : 208 # --> 14 : 224 # --> 15 : 240 # [MSTP_PORT_CIST_Cost][MSTP_PORT_MSTI_Cost] # --> 1 : edge port # --> 0 : non edge port # [Port 1] MSTP_PORT_EN_1= 0 MSTP_PORT_EDGE_1= 0 MSTP_PORT_CIST_PRI_1= 8 MSTP_PORT_CIST_Cost_1= 0 # [Port 2] MSTP_PORT_EN_2= 0 MSTP_PORT_EDGE_2= 0 MSTP_PORT_CIST_PRI_2= 8 MSTP_PORT_CIST_Cost_2= 0 # [Port 3] MSTP_PORT_EN_3= 0 MSTP_PORT_EDGE_3= 0 MSTP_PORT_CIST_PRI_3= 8 MSTP_PORT_CIST_Cost_3= 0 # [Port 4] MSTP_PORT_EN_4= 0 MSTP_PORT_EDGE_4= 0 MSTP_PORT_CIST_PRI_4= 8 MSTP_PORT_CIST_Cost_4= 0 # [Port G1] MSTP_PORT_EN_G1= 0 MSTP_PORT_EDGE_G1= 0 MSTP_PORT_CIST_PRI_G1= 8 MSTP_PORT_CIST_Cost_G1= 0 # [Port G2] MSTP_PORT_EN_G2= 0 MSTP_PORT_EDGE_G2= 0 MSTP_PORT_CIST_PRI_G2= 8 MSTP_PORT_CIST_Cost_G2= 0 ################################################### # Traffic Prioritization # # Prioritize Ethernet traffic to help determinism # ################################################### ################################################### # QoS Classification # ################################################### [QOS] # [QosMechanism]: QOS Mechanism # --> 0 : Weight Fair(8:4:2:1) # --> 1 : Strict(High Priority First Always) QosMechanism= 0 # [PortPriority]: Default Port Priority # --> 0 : Low priority # --> 1 : High priority # [InspectTos]: Inspect TOS # --> 0 : Disable # --> 1 : Enable # [InspectCos]: Inspect COS # --> 0 : Disable # --> 1 : Enable # [Port 1] PortPriority_1= 3 InspectTos_1= 1 InspectCos_1= 1 # [Port 2] PortPriority_2= 3 InspectTos_2= 1 InspectCos_2= 1 # [Port 3] PortPriority_3= 3 InspectTos_3= 1 InspectCos_3= 1 # [Port 4] PortPriority_4= 3 InspectTos_4= 1 InspectCos_4= 1 # [Port G1] PortPriority_G1= 3 InspectTos_G1= 1 InspectCos_G1= 1 # [Port G2] PortPriority_G2= 3 InspectTos_G2= 1 InspectCos_G2= 1 ################################################### # CoS Mapping # ################################################### [CoS] # [CoSMap]: Class of Service maps to priority queue # --> 0 : Low # --> 1 : Normal # --> 2 : Medium # --> 3 : High # [CoS 0] CoSMap_0= 0 # [CoS 1] CoSMap_1= 0 # [CoS 2] CoSMap_2= 1 # [CoS 3] CoSMap_3= 1 # [CoS 4] CoSMap_4= 2 # [CoS 5] CoSMap_5= 2 # [CoS 6] CoSMap_6= 3 # [CoS 7] CoSMap_7= 3 ################################################### # DSCP Mapping # ################################################### [DSCP Mapping] # [ToSMap]: Type of Service maps to priority queue # --> Range 0 to 7 ( according to CoS mapping ) #[DSCP0(0x00)] DSCPMap_0= 0 #[DSCP1(0x04)] DSCPMap_1= 0 #[DSCP2(0x08)] DSCPMap_2= 0 #[DSCP3(0x0c)] DSCPMap_3= 0 #[DSCP4(0x10)] DSCPMap_4= 0 #[DSCP5(0x14)] DSCPMap_5= 0 #[DSCP6(0x18)] DSCPMap_6= 0 #[DSCP7(0x1c)] DSCPMap_7= 0 #[DSCP8(0x20)] DSCPMap_8= 1 #[DSCP9(0x24)] DSCPMap_9= 1 #[DSCP10(0x28)] DSCPMap_10= 1 #[DSCP11(0x2c)] DSCPMap_11= 1 #[DSCP12(0x30)] DSCPMap_12= 1 #[DSCP13(0x34)] DSCPMap_13= 1 #[DSCP14(0x38)] DSCPMap_14= 1 #[DSCP15(0x3c)] DSCPMap_15= 1 #[DSCP16(0x40)] DSCPMap_16= 2 #[DSCP17(0x44)] DSCPMap_17= 2 #[DSCP18(0x48)] DSCPMap_18= 2 #[DSCP19(0x4c)] DSCPMap_19= 2 #[DSCP20(0x50)] DSCPMap_20= 2 #[DSCP21(0x54)] DSCPMap_21= 2 #[DSCP22(0x58)] DSCPMap_22= 2 #[DSCP23(0x5c)] DSCPMap_23= 2 #[DSCP24(0x60)] DSCPMap_24= 3 #[DSCP25(0x64)] DSCPMap_25= 3 #[DSCP26(0x68)] DSCPMap_26= 3 #[DSCP27(0x6c)] DSCPMap_27= 3 #[DSCP28(0x70)] DSCPMap_28= 3 #[DSCP29(0x74)] DSCPMap_29= 3 #[DSCP30(0x78)] DSCPMap_30= 3 #[DSCP31(0x7c)] DSCPMap_31= 3 #[DSCP32(0x80)] DSCPMap_32= 4 #[DSCP33(0x84)] DSCPMap_33= 4 #[DSCP34(0x88)] DSCPMap_34= 4 #[DSCP35(0x8c)] DSCPMap_35= 4 #[DSCP36(0x90)] DSCPMap_36= 4 #[DSCP37(0x94)] DSCPMap_37= 4 #[DSCP38(0x98)] DSCPMap_38= 4 #[DSCP39(0x9c)] DSCPMap_39= 4 #[DSCP40(0xa0)] DSCPMap_40= 5 #[DSCP41(0xa4)] DSCPMap_41= 5 #[DSCP42(0xa8)] DSCPMap_42= 5 #[DSCP43(0xac)] DSCPMap_43= 5 #[DSCP44(0xb0)] DSCPMap_44= 5 #[DSCP45(0xb4)] DSCPMap_45= 5 #[DSCP46(0xb8)] DSCPMap_46= 5 #[DSCP47(0xbc)] DSCPMap_47= 5 #[DSCP48(0xc0)] DSCPMap_48= 6 #[DSCP49(0xc4)] DSCPMap_49= 6 #[DSCP50(0xc8)] DSCPMap_50= 6 #[DSCP51(0xcc)] DSCPMap_51= 6 #[DSCP52(0xd0)] DSCPMap_52= 6 #[DSCP53(0xd4)] DSCPMap_53= 6 #[DSCP54(0xd8)] DSCPMap_54= 6 #[DSCP55(0xdc)] DSCPMap_55= 6 #[DSCP56(0xe0)] DSCPMap_56= 7 #[DSCP57(0xe4)] DSCPMap_57= 7 #[DSCP58(0xe8)] DSCPMap_58= 7 #[DSCP59(0xec)] DSCPMap_59= 7 #[DSCP60(0xf0)] DSCPMap_60= 7 #[DSCP61(0xf4)] DSCPMap_61= 7 #[DSCP62(0xf8)] DSCPMap_62= 7 #[DSCP63(0xfc)] DSCPMap_63= 7 ################################################### # VLAN # ################################################### [VLAN] # [VLANProtocol]: VLAN Protocol # --> 0 : 802.1Q VLAN # --> 1 : Port-based VLAN # --> 2 : Unaware VLAN # Note : # If you set one of both VLAN protocols, # the other VLAN protocol settings will be invaild ! # If you set Port-based VLAN, IGMP Snooping will be invaild ! # [VLANProtocol] VLANProtocol= 0 ################################################### # 802.1Q VLAN # # Setup Virtual LAN by IEEE standard 802.1Q # ################################################### # [SysVID]: Management VLAN ID # --> Range 1 to 4094 # [VLANType]: VLAN Port Type # --> 1 : Access # --> 0 : Trunk # --> 2 : Hybrid # [VLANPvid]: PVID # --> Range 1 to 4094 # [FixVid]: Fixed VLAN (Tagged) # --> Range 1 to 4094 # ex: FixVid1 2,88,54 # [FixUVid]: Fixed Untag VLAN (UnTagged) # --> Range 1 to 4094 # ex: FixUVid1 3,89,55 # [FrbVid]: Forbidden VLAN # --> Range 1 to 4094 # ex: FrbVid1 13,1048,211,2001 # [Management VLAN] SysVID= 800 # [GVRP Enable]: Enable GVRP # --> 0 : Disable # --> 1 : Enable GVRP_Enable= 0 # [Port 1] VLANType_1= 1 VLANPvid_1= 118 FrbVid_1= FixVid_1= FixUVid_1= # [Port 2] VLANType_2= 1 VLANPvid_2= 118 FrbVid_2= FixVid_2= FixUVid_2= # [Port 3] VLANType_3= 1 VLANPvid_3= 118 FrbVid_3= FixVid_3= FixUVid_3= # [Port 4] VLANType_4= 1 VLANPvid_4= 800 FrbVid_4= FixVid_4= FixUVid_4= # [Port G1] VLANType_G1= 0 VLANPvid_G1= 800 FrbVid_G1= FixVid_G1= 118, FixUVid_G1= # [Port G2] VLANType_G2= 0 VLANPvid_G2= 800 FrbVid_G2= FixVid_G2= 118, FixUVid_G2= ################################################### # Tag-based VLAN # ################################################### # [VLANName]: Name # --> At most 31 character. # [VLAN ID 800] VLANName_800= Mgmt_Bldg1800 # [VLAN ID 118] VLANName_118= Bldg1800-CCTV ################################################### # Port-based VLAN # [Port-based VLAN] # [PortVLAN]: Port-based VLAN member ports # --> 1,2,3,...,6,...,Trk3 # ex: PortVLAN_1 1,2,3,4 # [VLAN 1] PortVLAN_1= 1,2,3,4,G1,G2, # [VLAN 2] PortVLAN_2= # [VLAN 3] PortVLAN_3= # [VLAN 4] PortVLAN_4= # [VLAN 5] PortVLAN_5= # [VLAN 6] PortVLAN_6= ################################################### # Multicast Filtering # # Enable the multicast filtering capability # ################################################### ################################################### # IGMP Snooping # ################################################### [IGMP Snooping] # [EnableIGMPSnoop]: Enable Switch's IGMP Snooping # --> 0 : Disable # --> 1 : Enable EnableIGMPSnoop= 0 # [Enable Multicast Fast Forwarding Mode]: Enable Switch's IGMP Snooping Enhanced Mode # --> 0 : Disable # --> 1 : Enable Enable_Multicast_Fast_Forwarding= 0 # [QUERY_PERIOD]: Period of Proxy Query # --> Range 20 to 600 # --> unit is second QUERY_PERIOD= 125 # [IGMPSNOOP]: IGMPSnoop per VLAN # IGMPSNOOP [VID] [Enable IGMPSnoop] [Enable Querier] [Static Multicast Querier Port] # [VID]: Current VLAN ID # --> Range 1 to 4094 # [Enable IGMPSnoop] # --> 0 : Disable # --> 1 : Enable # [Ebable Querier] # --> 0 : Disable # --> 1 : IGMPv2 querier # --> 2 : IGMPv3 querier # [Static Multicast Querier Port] # --> Null : no port # --> 1,...,6,...,Trk3 # ex: IGMPSNOOP 23 1 1 3,4 # ==> vlan:23 , igmpsnooping enable , querier enable , static querier ports include port 3 and port 4 # ==> for querier enable: 0->disable, 1->IGMPv2 querier, 2->IGMPv3 querier # begin-of-list IGMPSNOOP_0= 800 1 1 IGMPSNOOP_2= 118 1 1 # end-of-list ################################################### # Add Static Multicast MAC # ################################################### [Static Multicast MAC] # MMAC [Multicast MAC address] [join ports] # --> Max records is 128 # [Multicast MAC address] # --> format : XX-XX-XX-XX-XX-XX # [join ports] # --> 1,...,6,...,Trk3 # ex: MMAC 01-90-E8-01-02-03 4,5,6 # ==> Add static multicast mac 01-90-E8-01-03 on port 4, port 5, port 6 # begin-of-list # end-of-list ################################################### # GMRP # ################################################### [GMRP] # [GMRPEnable]: Enable GMRP # --> 0 : Disable # --> 1 : Enable # [Port 1] GMRP_EN_1= 0 # [Port 2] GMRP_EN_2= 0 # [Port 3] GMRP_EN_3= 0 # [Port 4] GMRP_EN_4= 0 # [Port G1] GMRP_EN_G1= 0 # [Port G2] GMRP_EN_G2= 0 ################################################### # Multicast Filtering Behavior # ################################################### [Multicast Filtering Behavior] # [MFBMode]: Multicast Filtering Behavior Port Mode # --> 2 : Forward Unknown # --> 3 : Filter Unknown # [Port 1] MFBMode_1= 2 # [Port 2] MFBMode_2= 2 # [Port 3] MFBMode_3= 2 # [Port 4] MFBMode_4= 2 # [Port G1] MFBMode_G1= 2 # [Port G2] MFBMode_G2= 2 ################################################### # Bandwidth Management # ################################################### [Bandwidth Management] # [ControlMode]: Control Mode # --> 0 : Normal # --> 1 : Port Disable # Note : # In Port Disable Mode,if the port traffic is overloaded, # disable that port! # [ControlMode] ControlMode= 0 # [ControlModePeriod] ControlModePeriod= 30 ################################################### # Broadcast Storm Protection # ################################################### # [BSPEnable]: Enable Broadcast Storm Protection # --> 0 : Disable # --> 1 : Enable BSPEnable= 1 # [IncludeMulticast]: Include Multicast Packet # --> 0 : Disable # --> 1 : Enable IncludeMulticast= 0 # [IncludeDLF]: Include Unknown Multicast and Unknown Unicast Packet # --> 0 : Disable # --> 1 : Enable IncludeDLF= 0 ################################################### # Loop Protection Enable/Disable # ################################################### [Loop Protection] # --> 0 : Disable # --> 1 : Enable LOOP_PROTECTION_ENABLE= 0 ################################################### # Egress Rate Limiting # ################################################### [Rate Limiting] [RLI_EGRESS_SET] # --> "0" : Not Limit # --> "1" : Maximum 3% throughput # --> "2" : Maximum 5% throughput # --> "3" : Maximum 10% throughput # --> "4" : Maximum 15% throughput # --> "5" : Maximum 25% throughput # --> "6" : Maximum 35% throughput # --> "7" : Maximum 50% throughput # --> "8" : Maximum 65% throughput # --> "9" : Maximum 85% throughput # [Port 1] RLI_EGRESS_SET_1= 0 # [Port 2] RLI_EGRESS_SET_2= 0 # [Port 3] RLI_EGRESS_SET_3= 0 # [Port 4] RLI_EGRESS_SET_4= 0 # [Port G1] RLI_EGRESS_SET_G1= 0 # [Port G2] RLI_EGRESS_SET_G2= 0 ################################################### # Ingress Rate Limiting # ################################################### [RLI_SET] # --> "0" : Not Limit # --> "1" : Maximum 3% throughput # --> "2" : Maximum 5% throughput # --> "3" : Maximum 10% throughput # --> "4" : Maximum 15% throughput # --> "5" : Maximum 25% throughput # --> "6" : Maximum 35% throughput # --> "7" : Maximum 50% throughput # --> "8" : Maximum 65% throughput # --> "9" : Maximum 85% throughput # [Port 1] RLI_SET_1= 0 # [Port 2] RLI_SET_2= 0 # [Port 3] RLI_SET_3= 0 # [Port 4] RLI_SET_4= 0 # [Port G1] RLI_SET_G1= 0 # [Port G2] RLI_SET_G2= 0 ################################################### # Rate Limiting Port Disabled Mode # ################################################### [RLI_PD_SET] # --> "0" : Not Limit # --> "1" : Maximum 4464 packets # --> "2" : Maximum 7441 packets # --> "3" : Maximum 14881 packets # --> "4" : Maximum 22322 packets # --> "5" : Maximum 37203 packets # --> "6" : Maximum 52084 packets # --> "7" : Maximum 74405 packets # [Port 1] RLI_PD_SET_1= 0 # [Port 2] RLI_PD_SET_2= 0 # [Port 3] RLI_PD_SET_3= 0 # [Port 4] RLI_PD_SET_4= 0 # [Port G1] RLI_PD_SET_G1= 0 # [Port G2] RLI_PD_SET_G2= 0 ################################################### # Setup Filter Unknown Unicast # ################################################### [UNKNOWNUNICAST] # Enable/Disable Filter Unknown Unicast # --> 0 : Disable # --> 1 : Enable UNKNOWNUNICAST= 0 ################################################### # Auto Warning Setting # # - Email Warning Setting # # - Relay Warning Setting # ################################################### [Auto Warning Setting] ################################################### ################################################### # Email Warning Setting # ################################################### ################################################### # Email Information Setting # ################################################### # [SMTPServer]: SMTP server IP addr/name # --> max. length 39 words # ex: smtp.server.com SMTPServer= # [SMTPServer]: SMTP server Port # --> Range 1 to 65535 SMTPServerPort= 25 # [SMTPAccount]: account of SMTP server # --> max. length 45 words SMTPAccount= # [SMTPPasswordEncryp]: account password of SMTP server # --> max. length 45 words SMTPPasswordEncryp= ddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025abddd17d6c045025ab1702d041e912891c37daf173c09b35dd # [Sender_e-mail_address]: Sender e-mail address # --> max. length 37 words Sender_e-mail_address= admin@localhost # [SMTP_TLS]: SMTP server use TLS # --> 0 = No, 1 = Yes SMTP_TLS= 0 # [SMTP_Auth_Method]: SMTP server Autentication Method # --> 0 = Plain, 1 = Login, 2 = CRAM-MD5 SMTP_Auth_Method= 0 # [1st_e-mail_address]: 1st e-mail address # --> max. length 37 words 1st_e-mail_address= # [2nd_e-mail_address]: 2nd e-mail address # --> max. length 37 words 2nd_e-mail_address= # [3rd_e-mail_address]: 3rd e-mail address # --> max. length 37 words 3rd_e-mail_address= # [4th_e-mail_address]: 4th e-mail address # --> max. length 37 words 4th_e-mail_address= ################################################### # Setup Link-Swap fast recovery # ################################################### # [FASTRECOVERY]: Link-Swap fast recovery # Enable/Disable Link-Swap fast recovery for all ports. # --> 0 : Disable All Ports # --> 1 : Enable All Ports [Setup Link-Swap fast recovery] FASTRECOVERY= 1 ################################################### # Industrial Protocol # ################################################### [Industrial Protocol] ################################################### # Setup EtherNet/IP # ################################################### # [Industrial Protocol]: EtherNet/IP # Enable/Disable EtherNet/IP. # --> 0 : Disable EIP # --> 1 : Enable EIP EIP= 0 ################################################### # Setup PROFINETIO # ################################################### # [Industrial Protocol]: PROFINET IO # Enable/Disable PROFINET IO. # --> 0 : Disable PROFINET IO # --> 1 : Enable PROFINET IO PROFINETIO= 0 ################################################### # MODBUS/TCP # ################################################### # [Industrial Protocol]: MODBUS # Enable/Disable MODBUS. # --> 0 : Disable MODBUS # --> 1 : Enable MODBUS MODBUS= 1 ################################################### # Setup Set device IP # # The function is used to automatically assign IP # # address to connected devices that are equipped # # with 'DHCP-Client' or 'RARP'protocol. # ################################################### [device IP] # [DeviceIP] # --> ex: DeviceIP_1 XXX.XXX.XXX.XXX # [Port 1] DeviceIP_1= # [Port 2] DeviceIP_2= # [Port 3] DeviceIP_3= # [Port 4] DeviceIP_4= # [Port G1] DeviceIP_G1= # [Port G2] DeviceIP_G2= #################################################### # Setup Mirror Port # # Mirror port and Mirrored port can't set the same.# #################################################### [Mirror Port] # [MonitoredPort]: Monitored Port # --> 1,...,6,...,Trk3 # ==> Set '0' indicates not use. MonitoredPort= 0 # [WatchDirection]: Watch Direction # --> 0 : Input data stream # --> 1 : Output data stream # --> 2 : Bi-directional WatchDirection= 2 # [MirrorPort]: Mirror Port # --> 1,...,6 # --> Set '0' indicates not use. MirrorPort= 0 [Syslog] # [Server Enable/Disable]: Syslog Server Enable or Disable # [Syslog Server]: Syslog Server Address # [Syslog Port]: Syslog Server port number rang:1~65535 SYSLOG_SRV123_ACTIVE= 0 SYSLOG_SERVER1= SYSLOG_PORT1= 514 SYSLOG_SERVER2= SYSLOG_PORT2= 514 SYSLOG_SERVER3= SYSLOG_PORT3= 514 ################################################### # Tracking Setting # ################################################### [Tracking Setting] # [TrackingFunctionEnable]: Tracking Enable # --> 0: Disable # --> 1: Enable TrackingFunctionEnable= 0 # [TrackingType]: Type of Tracking # --> ex : Interface Tracking (Port) # [TrackingIP]: The Tracking IP Address # --> format : (xxx.xxx.xxx.xxx) # [TrackingPort]: The Tracking Port Number # [TrackingOP]: The Operator of Logical Tracking # --> 0: OR # --> 1: AND # --> 2: [NOT] OR # --> 3: [NOT] AND # [TrackingInterval]: The Interface of Tracking # --> Range 100 to 100000 (ms) # [TrackingUpDelay]: The Up Delay of Interface Tracking # --> Range 0 to 100000 (ms) # [TrackingDownDelay]: The Down Delay of Interface Tracking # --> Range 0 to 100000 (ms) # [TrackingTimeout]: The Timeout of Ping Tracking # --> Range 1 to 100000 (ms) # [TrackingReceived]: The Received Threshold of Ping Tracking # --> Range 1 to 100 # [TrackingLost]: The Lost Threshold of Ping Tracking # --> Range 1 to 100 # [TrackingTID]: The TIDs of Logical Tracking # --> 0: NULL # --> other: Tracking ID # [TrackingEnable]: Enable of Tracking # --> 0: Disable # --> 1: Enable ################################################### # DHCP Option 82 # ################################################### [DHCP Option 82] DHCP_OPTION82_SERVER1= DHCP_OPTION82_SERVER2= DHCP_OPTION82_SERVER3= DHCP_OPTION82_SERVER4= OPTION82_ENABLE= 0 OPTION82_TYPE= 0 DHCP_OPTION82_OTHER= # [Port 1] OPTION82_EN_1= 0 # [Port 2] OPTION82_EN_2= 0 # [Port 3] OPTION82_EN_3= 0 # [Port 4] OPTION82_EN_4= 0 # [Port G1] OPTION82_EN_G1= 0 # [Port G2] OPTION82_EN_G2= 0 ################################################### # Power Over Ethernet # ################################################### [Power Over Ethernet] # [POE]: PoE Power Output # --> 0 : Disable # --> 1 : Enable POE_POWER_OUTPUT= 1 # [POE]: PoE Power Budget # --> Range 30 to 180 POE_POWER_BUDGET= 180 # [POE]: PoE Power Threshold # --> Range 30 to 180 POE_POWER_THRESHOLD= 180 # [POE]: PoE Power Threshold Cutoff= # --> 0 : Disable # --> 1 : Enable POE_POWER_THRESHOLD_CUTOFF= 1 ################################################### # PoE Port Setting # ################################################### # [POE]: Port Poe Enable/Disable # --> 0 : Disable # --> 1 : Enable # [Port 1] POE_PORT1_EN= 1 # [Port 2] POE_PORT2_EN= 1 # [Port 3] POE_PORT3_EN= 1 # [Port 4] POE_PORT4_EN= 1 # [POE]: Port Poe Output Mode # --> 0 : 802.3 af/at Auto # --> 1 : High Power # --> 2 : Force # [Port 1] POE_PORT1_OUTPUTMODE= 0 # [Port 2] POE_PORT2_OUTPUTMODE= 0 # [Port 3] POE_PORT3_OUTPUTMODE= 0 # [Port 4] POE_PORT4_OUTPUTMODE= 0 # [POE]: Port Poe Power Allocation # --> Range 0 to 36 # Only work on PoE output "Force" mode. # [Port 1] POE_PORT1_POWERALLOCATION= 0 # [Port 2] POE_PORT2_POWERALLOCATION= 0 # [Port 3] POE_PORT3_POWERALLOCATION= 0 # [Port 4] POE_PORT4_POWERALLOCATION= 0 # [POE]: Port Poe Legacy PD Dection # --> 0 : Disable # --> 1 : Enable # [Port 1] POE_PORT1_LEGACYPD= 0 # [Port 2] POE_PORT2_LEGACYPD= 0 # [Port 3] POE_PORT3_LEGACYPD= 0 # [Port 4] POE_PORT4_LEGACYPD= 0 # [POE]: Port Poe Power Priority # --> Range 1 to 4 # [Port 1] POE_PORT1_POWERPRIORITY= 1 # [Port 2] POE_PORT2_POWERPRIORITY= 2 # [Port 3] POE_PORT3_POWERPRIORITY= 3 # [Port 4] POE_PORT4_POWERPRIORITY= 4 ################################################### # PoE Device Failure Check # ################################################### [PoE Device Failure Check] # [POE]: Port PD Failure Check Enable/Disable # --> 0 : Disable # --> 1 : Enable # [Port 1] POE_PORT1_PDCHECK= 0 # [Port 2] POE_PORT2_PDCHECK= 0 # [Port 3] POE_PORT3_PDCHECK= 0 # [Port 4] POE_PORT4_PDCHECK= 0 # [POE]: Port PD Failure Check IP address # [Port 1] POE_PORT1_PDIPADDR= # [Port 2] POE_PORT2_PDIPADDR= # [Port 3] POE_PORT3_PDIPADDR= # [Port 4] POE_PORT4_PDIPADDR= # [POE]: Port PD Failure Check No Response Timeout Cycles # --> Range 1 to 10 # [Port 1] POE_PORT1_PDCHECKNORESPONSE= 3 # [Port 2] POE_PORT2_PDCHECKNORESPONSE= 3 # [Port 3] POE_PORT3_PDCHECKNORESPONSE= 3 # [Port 4] POE_PORT4_PDCHECKNORESPONSE= 3 # [POE]: Port PD Failure Check Period # --> Range 5 to 300 # [Port 1] POE_PORT1_PDCHECKTIME= 10 # [Port 2] POE_PORT2_PDCHECKTIME= 10 # [Port 3] POE_PORT3_PDCHECKTIME= 10 # [Port 4] POE_PORT4_PDCHECKTIME= 10 # [POE]: Port PD Failure Check No Response Action # --> 0 : No Action # --> 1 : Reboot PD # --> 2 : Power Off PD # [Port 1] POE_PORT1_PDCHECKNORESPONSEACTION= 0 # [Port 2] POE_PORT2_PDCHECKNORESPONSEACTION= 0 # [Port 3] POE_PORT3_PDCHECKNORESPONSEACTION= 0 # [Port 4] POE_PORT4_PDCHECKNORESPONSEACTION= 0 ################################################### # [POE]: Port TimeTabling # ################################################### [Port TimeTabling] # [Port 1] # [POE]: Port TimeTabling Enable/Disable # --> 0 : Disable # --> 1 : Enable POE_PORT1_SCHEDULE= 0 # [Day 1] POE_PORT1_DAY0ENABLE= 0 POE_PORT1_DAY0START= 0 POE_PORT1_DAY0END= 24 # [Day 2] POE_PORT1_DAY1ENABLE= 0 POE_PORT1_DAY1START= 0 POE_PORT1_DAY1END= 24 # [Day 3] POE_PORT1_DAY2ENABLE= 0 POE_PORT1_DAY2START= 0 POE_PORT1_DAY2END= 24 # [Day 4] POE_PORT1_DAY3ENABLE= 0 POE_PORT1_DAY3START= 0 POE_PORT1_DAY3END= 24 # [Day 5] POE_PORT1_DAY4ENABLE= 0 POE_PORT1_DAY4START= 0 POE_PORT1_DAY4END= 24 # [Day 6] POE_PORT1_DAY5ENABLE= 0 POE_PORT1_DAY5START= 0 POE_PORT1_DAY5END= 24 # [Day 7] POE_PORT1_DAY6ENABLE= 0 POE_PORT1_DAY6START= 0 POE_PORT1_DAY6END= 24 # [Port 2] # [POE]: Port TimeTabling Enable/Disable # --> 0 : Disable # --> 1 : Enable POE_PORT2_SCHEDULE= 0 # [Day 1] POE_PORT2_DAY0ENABLE= 0 POE_PORT2_DAY0START= 0 POE_PORT2_DAY0END= 24 # [Day 2] POE_PORT2_DAY1ENABLE= 0 POE_PORT2_DAY1START= 0 POE_PORT2_DAY1END= 24 # [Day 3] POE_PORT2_DAY2ENABLE= 0 POE_PORT2_DAY2START= 0 POE_PORT2_DAY2END= 24 # [Day 4] POE_PORT2_DAY3ENABLE= 0 POE_PORT2_DAY3START= 0 POE_PORT2_DAY3END= 24 # [Day 5] POE_PORT2_DAY4ENABLE= 0 POE_PORT2_DAY4START= 0 POE_PORT2_DAY4END= 24 # [Day 6] POE_PORT2_DAY5ENABLE= 0 POE_PORT2_DAY5START= 0 POE_PORT2_DAY5END= 24 # [Day 7] POE_PORT2_DAY6ENABLE= 0 POE_PORT2_DAY6START= 0 POE_PORT2_DAY6END= 24 # [Port 3] # [POE]: Port TimeTabling Enable/Disable # --> 0 : Disable # --> 1 : Enable POE_PORT3_SCHEDULE= 0 # [Day 1] POE_PORT3_DAY0ENABLE= 0 POE_PORT3_DAY0START= 0 POE_PORT3_DAY0END= 24 # [Day 2] POE_PORT3_DAY1ENABLE= 0 POE_PORT3_DAY1START= 0 POE_PORT3_DAY1END= 24 # [Day 3] POE_PORT3_DAY2ENABLE= 0 POE_PORT3_DAY2START= 0 POE_PORT3_DAY2END= 24 # [Day 4] POE_PORT3_DAY3ENABLE= 0 POE_PORT3_DAY3START= 0 POE_PORT3_DAY3END= 24 # [Day 5] POE_PORT3_DAY4ENABLE= 0 POE_PORT3_DAY4START= 0 POE_PORT3_DAY4END= 24 # [Day 6] POE_PORT3_DAY5ENABLE= 0 POE_PORT3_DAY5START= 0 POE_PORT3_DAY5END= 24 # [Day 7] POE_PORT3_DAY6ENABLE= 0 POE_PORT3_DAY6START= 0 POE_PORT3_DAY6END= 24 # [Port 4] # [POE]: Port TimeTabling Enable/Disable # --> 0 : Disable # --> 1 : Enable POE_PORT4_SCHEDULE= 0 # [Day 1] POE_PORT4_DAY0ENABLE= 0 POE_PORT4_DAY0START= 0 POE_PORT4_DAY0END= 24 # [Day 2] POE_PORT4_DAY1ENABLE= 0 POE_PORT4_DAY1START= 0 POE_PORT4_DAY1END= 24 # [Day 3] POE_PORT4_DAY2ENABLE= 0 POE_PORT4_DAY2START= 0 POE_PORT4_DAY2END= 24 # [Day 4] POE_PORT4_DAY3ENABLE= 0 POE_PORT4_DAY3START= 0 POE_PORT4_DAY3END= 24 # [Day 5] POE_PORT4_DAY4ENABLE= 0 POE_PORT4_DAY4START= 0 POE_PORT4_DAY4END= 24 # [Day 6] POE_PORT4_DAY5ENABLE= 0 POE_PORT4_DAY5START= 0 POE_PORT4_DAY5END= 24 # [Day 7] POE_PORT4_DAY6ENABLE= 0 POE_PORT4_DAY6START= 0 POE_PORT4_DAY6END= 24 ################################################### # Access Control List # ################################################### [Access Control List] ################################################### # ACL Name # ################################################### [ACL Name] ################################################### # ACL Port Attachment # ################################################### [ACL Port] # [Port 1] Inbound_1= # [Port 2] Inbound_2= # [Port 3] Inbound_3= # [Port 4] Inbound_4= # [Port G1] Inbound_G1= # [Port G2] Inbound_G2= ################################################### # Management Interface # ################################################### [Management Interface] # [HTTP PORT]: Port of http service HttpEnable= 1 HttpPort= 80 # [SSL PORT]: Port of ssl(https) service SSLEnable= 1 SSLPort= 443 # [TELNET PORT]: Port of telnet service TelnetEnable= 1 TelnetPort= 23 # [SSH PORT]: Port of ssh service SSHEnable= 1 SSHPort= 22 # [SNMP PORT]: Port of snmp service SNMPEnable= 1 # [MOXA SERVICE PORT]: Port of moxa service MoxaServiceEnable= 1 # [MOXA SERVICE ENCRYPTED PORT]: Port of moxa service encrypted MoxaServiceEncryptedEnable= 1 # [HTTP / HTTPS MaxUser]: HTTP and HTTPS Maximum Users # --> 1~10 HttpHttpsMaxUser= 5 # [TelnetSSHMaxUser]: Telnet and SSH Maximum Users TelnetSSHMaxUser= 1 # [WEB AUTO-LOGOUT]: Web auto-logout # --> 0 : Disable web auto-logout # --> others : enable web auto-logout (Mins) AutoLogout= 5 ################################################### # System Event Settings # ################################################### [System Event] # [Cold Start] SYSTEM_EVENT_cold-start= 1,1,5,2 # [Warm Start] SYSTEM_EVENT_warm-start= 2,1,5,4 # [Config. Changed] SYSTEM_EVENT_config-changed= 3,1,5,4 # [PWR 1 Off->On] SYSTEM_EVENT_pwr1-trans-on= 56,1,5,4 # [PWR 2 Off->On] SYSTEM_EVENT_pwr2-trans-on= 57,1,5,4 # [PWR 1 On->Off] SYSTEM_EVENT_pwr1-trans-off= 58,1,5,4 # [PWR 2 On->Off] SYSTEM_EVENT_pwr2-trans-off= 59,1,5,4 # [Login Success] SYSTEM_EVENT_login-success= 30,1,5,4 # [Login Fail] SYSTEM_EVENT_auth-fail= 6,1,5,4 # [TACACS+ Auth. Success] SYSTEM_EVENT_tacacs-auth-success= 82,1,5,4 # [TACACS+ Auth. Fail] SYSTEM_EVENT_tacacs-auth-fail= 38,1,5,4 # [RADIUS Auth. Success] SYSTEM_EVENT_radius-auth-success= 83,1,5,4 # [RADIUS Auth. Fail] SYSTEM_EVENT_radius-auth-fail= 39,1,5,4 # [Topology Changed] SYSTEM_EVENT_topology-changed= 7,1,5,4 # [Coupling Changed] SYSTEM_EVENT_coupling-changed= 8,1,5,4 # [Master Changed] SYSTEM_EVENT_master-changed= 9,1,5,4 # [Master Mismatch] SYSTEM_EVENT_master-mismatch= 73,1,5,4 # [RSTP Root Changed] SYSTEM_EVENT_rstp-admin-changed= 48,1,5,4 # [RSTP Topo. Changed] SYSTEM_EVENT_rstp-topology-changed= 49,1,5,4 # [Turbo Ring Break] SYSTEM_EVENT_turbo-ring-break= 61,1,0,4 # [DI 1 On] SYSTEM_EVENT_di1-trans-on= 52,1,4,4 # [DI 1 Off] SYSTEM_EVENT_di1-trans-off= 54,1,4,4 # [ABC-02 Status] SYSTEM_EVENT_abc02-status= 262144,1,5,4 # [Rate Limited On (Disable Port)] SYSTEM_EVENT_rate-limited-on= 33,1,5,4 # [Rate Limited Off (Disable Port)] SYSTEM_EVENT_rate-limited-off= 34,1,5,4 # [Port Looping] SYSTEM_EVENT_port-looping= 35,1,5,4 # [LLDP Table Changed] SYSTEM_EVENT_lldp-table-changed= 51,1,1,6 # [PoE PD On] SYSTEM_EVENT_poe-pd-on= 42,1,5,4 # [PoE PD Off] SYSTEM_EVENT_poe-pd-off= 43,1,5,4 # [Over Measured Power limitation] SYSTEM_EVENT_poe-exceed-system-threshold= 44,1,5,4 # [PoE FETBad] SYSTEM_EVENT_poe-fetbad= 45,1,5,4 # [PoE Over Temperature] SYSTEM_EVENT_poe-over-temperature= 46,1,5,4 # [PoE VEE Uvlo] SYSTEM_EVENT_poe-vee-uvlo= 47,1,5,4 # [PoE PD Over Current] SYSTEM_EVENT_poe-pd-over-current= 31,1,5,4 # [PoE PD Check Fail] SYSTEM_EVENT_poe-pd-check-fail= 32,1,5,4 # [Over Allocated Power limitation] SYSTEM_EVENT_poe-exceed-power-budget= 74,1,5,4 # [Login Failure Lockout] SYSTEM_EVENT_login-failure-lockout= 76,1,4,4 # [Account Info Changed] SYSTEM_EVENT_account-info-changed= 77,1,5,4 # [Configuration is Imported] SYSTEM_EVENT_config-imported= 78,1,5,4 # [SSL Certification is Imported] SYSTEM_EVENT_cert-imported= 79,1,4,4 # [Fiber Check Warning] SYSTEM_EVENT_fiber-warning= 75,1,0,4 # [MAC Sticky Violation Port Disable] SYSTEM_EVENT_mac-sticky-violation-port-disable= 81,1,5,6 # [Tracking Status Changed] SYSTEM_EVENT_tracking-status-changed= 87,1,5,4 # [Port Enable Tracking Changed] SYSTEM_EVENT_tracking-port-enable-changed= 90,1,5,4 ################################################### # Port Event Settings # ################################################### [Port Event] # [Port 1 Event Settings] PORT_EVENT_1= 1,0x10000003,0x00000005,0,1,4 # [Port 2 Event Settings] PORT_EVENT_2= 1,0x10000003,0x00000005,0,1,4 # [Port 3 Event Settings] PORT_EVENT_3= 1,0x10000003,0x00000005,0,1,4 # [Port 4 Event Settings] PORT_EVENT_4= 1,0x10000003,0x00000005,0,1,4 # [Port 5 Event Settings] PORT_EVENT_G1= 1,0x10000003,0x00000005,0,1,4 # [Port 6 Event Settings] PORT_EVENT_G2= 1,0x10000003,0x00000005,0,1,4 ################################################### # System Notification # ################################################### [System Notification] # Web Login Message. # --> Maximum length = 240 characters WebLoginMessage= # Login Authentication Failure Message.. # --> Maximum length = 240 characters WebLoginFailMessage= ################################################### # Event Log Management # ################################################### [Eventlog management] # Event log capacity warning threshold(%). Threshold= 0 # Enable/Disble event log capacity trap warning. # --> 0 : Disable trap warning # --> 1 : Enable trap warning Trap warning= 1 # Enable/Disble event Log capacity email warning. # --> 0 : Disable email warning # --> 1 : Enable email warning Email warning= 1 # Event Log capacity oversize action. # --> 0 : Overwrite oldest event log # --> 1 : Stop recording event log Oversize action= 0 ################################################### # Password Policy # ################################################### [Password Policy] # [PwdMinLen]: Password Minimum Length # --> 4~16 PwdMinLen= 4 # [PwdComplexityEnable]: Password Complexity Enable # --> 0 : Disable # --> 1 : Enable PwdComplexityEnable= 0 # [PwdComplexityDigit]: Password Complexity Digit # --> 0 : Disable # --> 1 : Enable PwdComplexityDigit= 0 # [PwdComplexityAlphabet]: Password Complexity Alphabet # --> 0 : Disable # --> 1 : Enable PwdComplexityAlphabet= 0 # [PwdComplexitySpecialChar]: Password Complexity Special Char # --> 0 : Disable # --> 1 : Enable PwdComplexitySpecialChar= 0 ################################################### # Login Failure Lockout # ################################################### [Login Lockout] # [LoginLockoutEnable]: Login Lockout Enable # --> 0 : Disable # --> 1 : Enable LoginLockoutEnable= 0 # [LoginLockoutThreshold]: Login Lockout Threshold # --> 1~10 LoginLockoutThreshold= 5 # [LoginLockoutTime]: Login Lockout Time (minute) # --> 1~60 LoginLockoutTime= 5 # ----------End of File---------- [End of File]