Current configuration : 5343 bytes
!
! Last configuration change at 17:01:32 eest/bu Tue Sep 5 2023 by tanchist
!
version 15.7
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname Rtr_PT_Teste_acceslist
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone eest 2 0
clock summer-time eest/bucharest recurring last Sun Mar 3:00 last Sun Oct 4:00
!
!
!
!
!
!
!
!
!
!
!


!
!

!
!
no ip domain lookup
ip domain name TestMN
ip name-server 192.168.1.133
ip name-server 192.168.1.134
ip cef
login block-for 300 attempts 5 within 120
login on-failure log
login on-success log
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
chat-script lte "" "AT!CALL" TIMEOUT 20 "OK"
!
!
license udi pid IR809G-LTE-GA-K9 sn FCW223500DD
!
!
username tanchist privilege 15 secret 5 
username admin privilege 15 secret 5
!
redundancy

!
!
!
!
!
controller Cellular 0
 lte sim max-retry 0
 lte failovertimer 5
 lte modem link-recovery disable
!
track 234 ip sla 1 reachability
 delay down 10
!
! 
!
!
!
!
!
!
!
!
!
interface Loopback0
 no ip address
!
interface Tunnel1
 description Tunnel to HQ
 bandwidth 1000
 ip address 192.168.217.90 255.255.255.252
 ip access-group lista_dimamic in
 ip access-group 1 out
 no ip redirects
 no ip proxy-arp
 ip flow ingress
 ip nat outside
 ip virtual-reassembly in
 ip ospf network point-to-point
 ip ospf mtu-ignore
 keepalive 30 3
 tunnel source Cellular0
 tunnel destination 192.168.102.250
!
interface GigabitEthernet0
 no ip address
 duplex auto
 speed auto
!
interface GigabitEthernet1
 ip address 192.168.190.145 255.255.255.240
 no ip proxy-arp
 ip flow ingress
 ip flow egress
 ip nat outside
 ip virtual-reassembly in
 duplex auto
 speed auto
!
interface GigabitEthernet2
 ip address 192.168.2.1 255.255.255.252
 ip nat inside
 ip virtual-reassembly in
 duplex auto
 speed auto
 ipv6 address autoconfig
 ipv6 enable
!
interface Cellular0
 ip address negotiated
 ip flow ingress
 ip virtual-reassembly in
 encapsulation slip
 load-interval 30
 dialer in-band
 dialer idle-timeout 0
 dialer string lte
 dialer-group 1
 ipv6 address autoconfig
 async mode interactive
!
interface Cellular1
 no ip address
 encapsulation slip
!
interface Async0
 no ip address
 encapsulation relay-line
 half-duplex
 async mode dedicated
 media-type rs485
!
interface Async1
 no ip address
 encapsulation relay-line
 async mode dedicated
!
!
router ospf 1
 router-id 192.168.190.145
 auto-cost reference-bandwidth 10000
 area 346 stub no-summary
 passive-interface default
 no passive-interface Tunnel1
 network 192.168.190.144 0.0.0.15 area 346
 network 192.168.217.88 0.0.0.3 area 346
!
ip forward-protocol nd
!
ip http server
ip http secure-server
ip flow-export version 9
ip flow-export destination 192.168.1.228 9999
!
ip route 0.0.0.0 0.0.0.0 Cellular0 250
ip route 192.168.102.250 255.255.255.255 Cellular0
ip ssh authentication-retries 5
ip ssh port 2222 rotary 1
ip ssh version 2
ip ssh pubkey-chain
  username root
   key-hash ssh-rsa 61985951A531D081716AA81E807D4BC4 
!
ip access-list extended lista_dimamic
 permit ospf any any
 permit tcp any host 192.168.217.90 eq telnet
 dynamic TESTE permit ip any any
!
ip sla 1
 icmp-echo 192.168.250.1
 frequency 300
 timeout 2000
 threshold 2000
ip sla schedule 1 life forever start-time now
logging host 192.168.1.235
dialer-list 1 protocol ip list 1
dialer-list 1 protocol ipv6 permit
ipv6 ioam timestamp
!
!
snmp-server community TestMN RO
snmp-server enable traps wpan
snmp-server host 192.168.1.230 version 2c TestMN 
snmp mib notification-log default

access-list 1 permit any

!
control-plane
!
!
!
 vstack
banner motd ^CCCC
***********************************************
$(hostname)

***********************************************
^C
!
line con 0
 login local
 stopbits 1
line 1
 exec-timeout 5 0
 rotary 1
 no exec
 transport preferred none
 transport input all
 transport output all
 stopbits 1
line 2
 exec-timeout 0 0
 no exec
 transport preferred none
 transport input all
 transport output none
 stopbits 1
line 3
 script dialer lte
 no exec
 transport preferred none
 transport output none
 rxspeed 236800
 txspeed 118000
line 8
 no exec
 transport preferred none
 transport output none
 rxspeed 236800
 txspeed 118000
line 1/3
 transport preferred none
 transport output none
 stopbits 1
line 1/4
 transport preferred none
 transport input all
 transport output none
 stopbits 1
line 1/5
 transport preferred none
 transport output none
 stopbits 1
line 1/6
 transport preferred none
 transport input all
 transport output all
 stopbits 1
line vty 0
 privilege level 15
 login local
 autocommand  access-enable timeout 5
 transport input telnet ssh
line vty 1 4
 privilege level 15
 login local
 transport input telnet ssh
line vty 5 15
 privilege level 15
 login local
 transport input telnet ssh
!

!
!
!
!
!
!
!
end