IR800#sh run
Building configuration...


Current configuration : 3083 bytes
!
version 15.9
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname IR800
!
boot-start-marker
boot system flash:/ir800-universalk9-mz.SPA.159-3.M1
boot-end-marker
!
!
no logging console
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
!
!
!
!
!
aaa session-id common
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!


!
ip dhcp excluded-address 192.168.2.1
!
ip dhcp pool gospool
 network 192.168.2.0 255.255.255.0
 default-router 192.168.2.1
 domain-name epg.ro
 dns-server 8.8.8.8
   remember
!
!
!
ip domain name epg.ro
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
chat-script lte "" "AT!CALL" TIMEOUT 20 "OK"
!
!
license udi pid IR809G-LTE-GA-K9 sn FCW2106008P
!
!

username admin secret 5 $1$7/yE$ivYs9A9.O3.1fopQKQKXt0
!
redundancy

!
!
!
!
!
controller Cellular 0
 lte sim fast-switchover enable
 lte failovertimer 5
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0
 ip address 10.10.30.190 255.255.255.0
 ip nat outside
 ip virtual-reassembly in
 duplex auto
 speed auto
!
interface GigabitEthernet1
 ip address 192.168.1.90 255.255.255.0
 ip nat outside
 ip virtual-reassembly in
 duplex auto
 speed auto
!
interface GigabitEthernet2
 ip address 192.168.2.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly in
 duplex auto
 speed auto
 ipv6 address autoconfig
 ipv6 enable
!
interface Cellular0
 no ip address
 encapsulation slip
 dialer in-band
 dialer string lte
!
interface Cellular1
 no ip address
 encapsulation slip
!
interface Async0
 no ip address
 encapsulation scada
!
interface Async1
 no ip address
 encapsulation relay-line
 async mode dedicated
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source static 192.168.2.2 10.10.30.191
ip nat inside source static 192.168.2.3 10.10.30.192
ip route 0.0.0.0 0.0.0.0 10.10.30.1
ip ssh version 2
ip scp server enable
!
ipv6 ioam timestamp
!
!
!
!
!
control-plane
!
!
!
line con 0
 stopbits 1
line 1
 stopbits 1
line 2
 exec-timeout 0 0
 no exec
 transport preferred none
 transport input all
 transport output none
 stopbits 1
 speed 19200
line 3
 script dialer lte
 no exec
 transport preferred lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line 8
 no exec
 transport preferred lat pad telnet rlogin lapb-ta mop udptn v120 ssh
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line 1/3
 transport preferred none
 transport output none
 stopbits 1
line 1/4
 transport preferred none
 transport input all
 transport output none
 stopbits 1
line 1/5
 transport preferred none
 transport output none
 stopbits 1
line 1/6
 transport preferred none
 transport output none
 stopbits 1
 speed 19200
line vty 0 4
 transport input ssh
!
no scheduler max-task-time
relay line 2 1/6
no iox hdm-enable
iox client enable interface GigabitEthernet2
no iox recovery-enable
!
!
!
!
!
!
!
end